GX200 2+4 Gasoline Engine-Driven Welder DC CC Fuel Eﬃcient, Low Noise Level 4,000 Watt AC Generator 11HP GX340 Honda Gasoline Engine Exceptionally smooth output from the brushless, asynchronous alternator provides excellent welding characteristics and arc striking voltage. Lightweight and portable with auxiliary power available while welding.D300K 3+3 Diesel Engine-Driven Welder DC CC Available with Optional CV Module Fuel Eﬃcient V1903 Kubota Diesel Engine 3,000 Watts AC Auxiliary Power The pure DC generator with all copper coils provides excellent welding characteristics. Constant speed engine for instant arc starting. The V1903 Kubota diesel engine provides reliable, eﬃcient operation in even the most severe conditions. Rated output 300 A at 32 VDC 60% duty cycle, 250 A at 30 VDC 100% duty cycle.D302K 3+12 Diesel Engine-Driven Welder DC CC CV Stick, MIG, Lift-Arc DC TIG, Flux-Cored Welding and Air Carbon Arc Gouging Kubota V1505-E2BG1, Tier 2, 20.2 HP Liquid-Cooled Diesel Engine 12,000 Watts Peak, 10,000 Watts Continuous 120/240 VAC Power The 3+12 is a constant current/constant voltage, DC diesel engine-driven welder with a high-eﬃciency, three-phase welding generator that requires less fuel but has enough power for gouging with up to 1/4" carbons.D500K 5+3 Diesel Engine-Driven Welder DC CC Full Range Amperage Control Fuel Eﬃcient Kubota F-2803 Diesel Engine 3,000 Watts AC Auxiliary Power For demanding jobs that call for high amperage capabilities using electrodes up to 1/4" in diameter and air carbon arc (CAC-A) gouging with carbons up to 5/16" in diameter.D502K 5+4 Diesel Engine-Driven Welder DC CC CV Stick, MIG, DC TIG, Flux-Cored Welding and Air Carbon Arc Gouging Kubota V3300-B 49 HP Liquid-Cooled Diesel Engine 5,500 Watts Peak, 4,000 Watts Continuous 120/240 VAC Auxiliary Power The three-phase rotating ﬁeld generator produces a smooth DC weld output and has enough power for gouging with up to 3/8" carbons. Simpliﬁed control panel with a ﬁve position range switch and a ﬁne control potentiometer provides easy set-up.Welding Accessories Welding TrailersWelding Accessories Welding Accessories Remote Controls Welding Cables
Used Welders, Positioners, Specialty EquipmentES275i and Invertec V275-S Stick Welders DC CC C Stick, DC TIG with Touch-Start 200 A at 28 VDC, 100% Duty Cycle Output 275 amp at 35% duty cycle, constant current, DC, inverter welder with both single- and three-phase, 50/60 Hz voltage input. Outstanding E6010 and E7018 performance using up to 7/32” diameter electrodes that enables both whip or drag techniques.E300 DC Stick Welders DC CC Rugged Tubular Pak-Lok-Frame Excellent Performance and Versatility 250 A at 30 VDC, 30% Duty Cycle Output For stick welding with all types of electrodes up to 3/16" including low hydrogen, stainless steel, hardfacing, aluminum and bronze. Also scratch start DC TIG, and MIG or ﬂux-cored welding with voltage sensing wirefeeders.E500 and Idealarc R3R-500 Stick Welders DC CC Produces quality, low spatter, smooth arcs without pop-outs Calibrated current control knob for simple and easy procedure setting 500 A at 40 VDC, 60% Duty Cycle Output The choice for industrial applications oﬀering a smooth, consistent arc and enough amperage for air carbon arc gouging with up to 3/8" diameter carbons.EX300 and XMT 304 Multiprocess Welders CC CV V 300 Amps Output at 32 Volts, 60% Duty Cycle Output CC/CV DC Inverter Technology Lightweight, Compact, Portable Excellent performance for most welding processes including pulse MIG and TIG with optional Optima and d Intellitig-4 controls. Available with either 208-230/460 V or 460/575 V input connections.E300 3+2 Multiprocess Welders and Paks DC CC CV 2,000 Watts AC Auxiliary Power Arc Force, Hot Start, Continuous Output Control Full Remote Control Capabilities Outstanding arc characteristics on both constant current and constant voltage processes in a rugged, compact design. Includes MS-style connections for 115V wirefeeders and 3-pin remote controls.DC400 and DC600 Multiprocess Welders DC CC CV V Full Range Output Control CC Stick, CV MIG/FCAW, and CV Submerged Arc Welding Modes Designed for GMAW (MIG), FCAW and submerged arc welding, and stick and air carbon arc gouging with up to 3/8" diameter electrodes. Includes standard terminal strip for wirefeeders and remote controls.Maxstar 200 SD and Syncrowave 250/350 TIG TIG (GTAW) and Stick (SMAW) Processes - Pulsed TIG (GTAW-P) available with optional controls Excellent Welding Performance, Control and Versatility Lift-Arc start provides TIG arc starting without the use of high-frequency. Syncrowave models provide constant current Squarewave technology. All are available with various Coolmate coolant systems or Cool Runner systems for water-cooled TIG applications, and a variety of remote foot and hand controls.
Used Welders, Positioners, Specialty EquipmentLN25 and 12VS Voltage Sensing Wirefeeders MIG and Flux-Cored Welding Operates on Arc Voltage and Open Circuit Voltage from CV or CC Welders Operates oﬀ arc voltage with a voltage sensing control circuit. Can be operated with all electric and engine-driven welders with CV capability but can also be used with CC welders for non-critical welds. .LN-7, LN-8, and LN-9 Semiautomatic Wirefeeders MIG, Flux-Cored and Submerged Arc Welding Semiautomatic Constant Speed Wirefeeders Solid State Control Semiautomatic constant-speed wirefeeders providing dependable performance and reliable operation, making them ideal for shop or ﬁeld operations. Controlled wire feed speed during starting provides clean, positive starts and minimizes stubbing, and spatter. p V Viper, Python/Pro-Cut 55, 80 Plasma Cutters rs s PCT 80 Plasma Torch Operates Without High Frequency Torch Uses Only Three Consumables for Easy Maintenance Patented Full-Flow Cooling for Long Consumable Life Unmatched cutting speeds, low dross levels and unparalleled ease of use. Machine and robotic torches are available. SE1602W Smoke Extractor Two Operating Speeds Internal Spark Trap for Extended Filter Life The SE1602W smoke extractor is a lightweight, stainless-steel enclosed, suitcase-sized air cleaner that is very easy to transport about the jobsite. Welding fume is trapped at the source thus maximizing the protection to the operator by removing airborne contaminant before it enters the operator breathing-area. Positioners s Turning Rolls TUp to 10,0 lb Capacity Positioners Available 10,000 ti Up to 400 ton Set Ca Capacities Available P ProHeat 35 Induction Heating System Weld Preheating and Stress Relieving Liquid-Cooled and Air-Cooled Systems Reduced Set-Up, Fast Time-to-Temperature With the new ProHeat™ 35 induction heating system, joints can be rapidly and uniformly heated for preheat or stress relief with minimal setup and instruction time. This system induces heat electromagnetically rather than by using a heating element. More information is available at www.reddarc.com/IHS