NSK          NSK EMBEDDED KITS                        INTRODUCTION MANUAL                                      NSK      Ns...
NSK                                   8051 PROGRAMMER - VER 1.0                                               (SERIAL PORT...
NSK                                       8051 PROGRAMMER - VER 3.1                                                       ...
NSK                                         PIC PROGRAMMER - PIC PROGIntroduction:Simple to use & low cost, yet powerful f...
NSK                                 USB PIC PROGRAMMER - PIC PLUS      Introduction:      Simple to use & low cost, yet po...
NSK                    MPLAB ICD2 PIC PROGRAMMER & DEBUGGERWhat is MPLAB ICD 2?The MPLAB ICD 2 is a low-cost in-circuit de...
NSK                                                                                                      AVR PROG       AV...
NSK                         CPLD TRAINER KIT                          Xilinx XC9572XL                           Introducti...
NSK                              SEEPROM PROGRAMMER Introduction Serial eeproms are finding more and more use in electroni...
NSK                ARM DEVOLOPMENT KIT (LPC2129)                              ON BOARD ISP &JTAG1. Board Features:1. LPC 2...
NSK                          8051 DEVOLOPMENT BOARD      Introduction:      Our Devolopment Board are made with full effor...
NSK                            RFID Reader Introduction: The DT125R series RFID Proximity OEM Reader Module has a built-in...
NSK                      PIC DEVOLOPMENT BOARD  Introduction:  Our Devolopment Board are made with full effort to make pro...
NSK                    I/O INTERFACE BOARDS      12.1 - 4X4 MATRIX KEYPAD               12.2 - MULTIPLEXED7 SEG DISPLAY   ...
NSK      12.7 - 8 CHANNEL RELAY CONTROL BOARD       12.8- LCD DISPLAY INTERFACED BOARD WITH 8 O/P              with Power ...
NSK                    13- STEPPER MOTOR DRIVER       Introduction:       The A/D Stepper Motor Controller IC1 generates f...
NSK      Contact information      For software Downloads &additional information, please visit http://www.nskelectronics.c...
Upcoming SlideShare
Loading in …5
×

Nsk products

3,917 views

Published on

vv

Published in: Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
3,917
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
34
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Nsk products

  1. 1. NSK NSK EMBEDDED KITS INTRODUCTION MANUAL NSK Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  2. 2. NSK 8051 PROGRAMMER - VER 1.0 (SERIAL PORT/USB)Introduction:Simple to use & low cost, yet powerful flash microcontroller programmer for the Atmel 89 series. It will Program, Read andVerify Code Data, Write Lock Bits, Erase and Blank Check. All fuse and lock bits are programmable. This programmer hasintelligent onboard firmware and connects to the serial port. It can be used with any type of computer and requires no specialhardware. All that is needed is a serial communication port which all computers have.All devices have signature bytes thatthe programmer reads to automatically identify the chip. No need to select the device type – just plug it in and go! All devicesalso have a number of lock bits to provide various levels of software and programming protection. These lock bits are fullyprogrammable using this programmer. Lock bits are useful to protect the progam to be read back from microcontroller onlyallowing erase to reprogram the microcontroller.The programmer connects to a host computer using a standard RS232 serial port. All the programming “intelligence” is builtinto the programmer so you do not need any special hardware to run it. Programmer comes with window based software foreasy programming of the devices supports in Win 9x,2000,Xp,WinMe. This Programmer Supportrs 89C51,89C52,89C5589S51,52,8252 YOU CAN CONNECT THROUGH USB PORT USING OUR USB TO UART CONTROLLER KIT NO -12.5 1.3 - Packaging Your package contains 1. 8051 Programmer 2. Serial port cable 3. User manual 4. CD containing software 5. 8051 demo board for testing Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  3. 3. NSK 8051 PROGRAMMER - VER 3.1 (PARALLEL PORT )Introduction:Simple to use & low cost, yet powerful flash microcontroller programmer for the Atmel 89 series. It will Program, Read and Verify CodeData, Write Lock Bits, Erase and Blank Check. All fuse and lock bits are programmable. It can be used with any type of computer and requires no special hardware. All that is needed is a PARALLEL communication port which allcomputers have.The programmer connects to a host computer using a standard Parallel port. All the programming “intelligence” is built into the programmerso you do not need any special hardware to run it. Programmer comes with window based software for easy programming of the devicessupports in Win 9x,2000,Xp,WinMe.Programmer is Built in power supply , The programmer consists of both 40pin&20pin Zip socket for40pin&20pin IC respectively DEVICES SUPPORTED AT 89C51,AT89C52,AT89C55,AT89C55WD,AT89C1051, AT89C1051U,AT89C2051,AT89C4051,AT89S51,89S52 AT89S53,AT89S8252,AT89C51RC,D87C51,D87C52i1 1.3 - Packaging Your package contains 1. 8051 Programmer 2. PARALLEL port cable 3. User manual 4. CD containing software 5. 8051 demo board for testing Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  4. 4. NSK PIC PROGRAMMER - PIC PROGIntroduction:Simple to use & low cost, yet powerful flash microcontroller programmer for the PIC series. It will Program, Read and VerifyCode Data, Write Lock Bits, Erase and Blank Check. All fuse and lock bits are programmable. This programmer has intelligentonboard firmware and connects to the serial port. It can be used with any type of computer and requires no special hard-ware. All that is needed is a serial communication port which all computers have.All devices have signature bytes that theprogrammer reads to automatically identify the chip. No need to select the device type – just plug it in and go! All devicesalso have a number of lock bits to provide various levels of software and programming protection. These lock bits are fullyprogrammable using this programmer. Lock bits are useful to protect the progam to be read back from microcontroller onlyallowing erase to reprogram the microcontroller.The programmer connects to a host computer using a standard RS232 serial port. All the programming “intelligence” is builtinto the programmer so you do not need any special hardware to run it. Programmer comes with window based software foreasy programming of the devices supports in Win 9x,2000,Xp,WinMe.This Programmer Supportrs i112C508,508A,509,509A,671,672,10F200,202,204,206,12CE518,519,673,674,12F675,629,635,683,16C433,54,56,58,61,62A,62B,63,63A,64A,65A,65B,66,67,71,16C72,72A,73A,73B,74A,74B,76,77,84,505,620,620A,621,16C621A,622,622A,711,712,715,716,717,745,765,770,771,16C773,774,781,782,923,924,16CE623,624,625, 16F72,73,74,76,77,83,84,84A,88,627,628A,630,648A,676,16F818,819,870,871,872,873,873A,874,874A,876,876A,877,877A18F242,248,252,258,442,448,452,458,1220,1320,2320,2220.4220,2331,2431,18F4431,4320,4539,6620,6720,8620,8720,6520,8520,2410,2420,2455,2480,2510,2515,2520,2525,2550,2580,2585,2610,2620,2680,4410,4420,4455,4480,4510,4515,4520,4525,4550,4580,4585,4610,4620,4680, PIC PROG 1.3 - Packaging Your package contains 1. PIC Programmer 2. Serial port cable 3. User manual 4. CD containing software 5. Demo board for testing Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  5. 5. NSK USB PIC PROGRAMMER - PIC PLUS Introduction: Simple to use & low cost, yet powerful flash microcontroller programmer for the PIC series. It will Program, Read and Verify Code Data, Write Lock Bits, Erase,and Blank Check,Auto programming mode - this allows you to program chips without having to touch the Windows interface.When active, the software will detect when a chip is inserted into the socket and automatically commence the program/verify process.Once the chip is programmed, the software will wait until the next chip is inserted before programming continues. All fuse and lock bits are programmable. This programmer has intelligent onboard firmware and connects to the USB port As a virtual COM prot . It can be used with any type of computer and requires no special hardware. All that is needed is a USB communication port which all computers have.All devices have signature bytes that the programmer reads to automati- cally identify the chip. No need to select the device type – just plug it in and go! All devices also have a number of lock bits to provide various levels of software and programming protection. These lock bits are fully programmable using this program- mer. Lock bits are useful to protect the progam to be read back from microcontroller only allowing erase to reprogram the microcontroller. The programmer connects to a host computer using a standard USB port. All the programming “intelligence” is built into the programmer so you do not need any special hardware to run it. Programmer comes with window based software for easy programming of the devices supports in Win 9x,2000,Xp,WinMe. This Programmer Supportrs 12C508, 12C508A, 12C509, 12C509A,12C671, 12C672, 12CE673, 12CE674, 12F629,12F675,16C505,16C554,16C558,16C61,16C62,16C62A,16C62B 16C63,16C63A,16C64,16C64A,16C65,16C65A,16C65B,16C66, 16C66A,16C67, 16C620, 16C620A,16C622,16C622A,16C71,16C71A,16C72,16C72A,16C73,16C73A,16C74,16C74A 16C71,16C71A,16C72,16C72A,16C73,16C73A,16C74,16C74A,16C74B,16C76,16C77,16C710, 16C711,16C712,16C716,16C745,16C765,16C773,16C774,16C83,16C84,16F627,16F627A,16F628 16F628A,16F630,16F648A,16F676,16F,72,73,16F74,16F76,16F77,16F737,16F747,16F767, 16F777,16F83,16F84,16F84A,16F87,16F88,16F818,16F819,16F870,16F871,16F872,16F873,16F873A 16F874,16F874A,16F876,16F876A,16F877,16F877A,18F242,18F248,18F252,18F258,18F442,18F448, 18F452,18F458,18F1220,18F1320,18F2220,18F2320,18F4220,18F4320,2550,4550 1.3 - Packaging Your package contains 1. Programmer 2. USB port cable 3. User manual 4. CD containing software 5. Demo board for testing Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  6. 6. NSK MPLAB ICD2 PIC PROGRAMMER & DEBUGGERWhat is MPLAB ICD 2?The MPLAB ICD 2 is a low-cost in-circuit debugger (ICD) and in-circuit serial programmer(ICSP). MPLAB ICD 2 is intended to be used as an evaluation, debugging and programming aidIn a laboratory environment. The MPLAB ICD 2 offers these features: · Real-time and single-step code execution · Breakpoints, Register and Variable Watch/Modify · In-circuit debugging · Target Vdd monitor · Diagnostic LEDs · MPLAB IDE user interface · RS-232 serial interface to a host PCHow MPLAB ICD 2 Helps YouThe MPLAB ICD 2 allows you to: · Debug your source code in your own application · Debug your hardware in real-time · Program a supported device using Microchip’s ICSP protocol through RJ 11 cable supplied with this kit 1.3 - Packaging Your package contains 1. PIC ICD2 Programmer 2. Serial port cable 3. User manual 4. CD containing software 5. PIC demo board for testing with RJ11 Socket 6. RJ 11 cable crimped on both sides Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  7. 7. NSK AVR PROG AVR PROG ISP PROGRAMMER - USB 1. General description ‘ AVR PROG’ support major chips From Atmel Avr Series For programming that are flash program- mable microcontrollers that supports serial programming of devices. Flash microcontroller can be erased and re-written as many times as possible. Flexibility to reprogram number of times and its low cost make it ideal for use in a wide areas of applications.This product is a combination of intelligent hardware and software Inside the Chip that understands a protocol received from computer through USB port . On computer side software called ‘AVR PROG ’ is started that identifies the hardware and the chip inserted. Program for the target microcontroller can be now either read back or sent as Intel format HEX file. Support locking of devices to prevent reading back of programmed chip. After locking the chip can still be erased and used again for loading new programs. 2. Features Support major AVR devices Lock of programs in chip supported to prevent program copying Adapter Board with 2 ZIF socket For programming Auto Erase before writing and Auto Verify after writing Informative status bar and access to latest programmed file Simple and Easy to use 3. Specifications Dimensions: 180mm x 100mm Power Supply - USB POWERED Interface: USB Data Speed: 9600 bps, 8 bits, no parity, 1 stop, no flow control File format: Intel 8-bit HEX Program Sockets: ISP O/P ADAPTER FOR PROGRAMMING Software: Works on Windows 95, 98, Me, 2000, NT, XP SUPPORTED DEVICES AVR STUDIO >AVR PROG VER 1.40 AT90S8534,8544,1200,2313,2323,2333 AT90S2343,4414,4433,4434,8515,8535 ATMEGA 103,128,16,161,163,169,32, ATMEGA 603,64,8,83,8515, 8535, AT TINY 12,15,19,26,28 SUPPORTED DEVICES > AVR OSP II >AVR PROG 911 AT90S1200,2313,2323,2343,4414,4433,4434,8515,8535, ATMEGA103,128,1280,1281,16,161,162,163,165,168,169, ATMEGA 2560,2561,32,323,325,3250,329,3290,406,48,64 ATMEGA 640,644,645,6450,649,6490,8,8515,8535,88 ATTINY 11,12,13,15,22,2323,25,26,261,28,44,45,461,84,85,86 AT90CAN128,32,64 - AT90PWM2,3Nsk Electronics , India ©Copyright 2007,All Right Reservedhttp://www.nskelectronics.com
  8. 8. NSK CPLD TRAINER KIT Xilinx XC9572XL Introduction and Features: • The CPLD Development kit based on Xilinx XC9572XL is a low cost evaluation platform for training, testing and developing designs based on the Xilinx 9500XL family of CPLD. • The board contains the 1600 gate, 72 macro cells, 100 Pin XC9572XL CPLD with 72 user I/O’s. • An on-board power supply includes 3.3V regulator, which regulates Vcc internal & Vcc I/O for the CPLD. • A 40 MHz Crystal Oscillator provides clock source that is directly connected to GCK1 clock input on the 9572XL device. • All user I/O pins are brought out of the 9572XL device. • Peripheral interfaces like LEDs, 7 Segment Displays, Key Switches& Buzzer are provided on board. • Separate Jumper settings have been provided for accessing the I/Os for other external applications. • A built-in JTAG programmer board is also available for programming the XC9572XL. • The HDL code can easily be implemented using the Webpack software available on the Xilinx Website. • Datasheets are provided in the CD-ROM accompanying the Kit and a softcopy of the user manual is also included in the CD as well. Packaging Your package contains 1. CPLD kit 2. JTAG Parallel port cable 3. User manual 4. CD containing software (XILINX ISE webpack) Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  9. 9. NSK SEEPROM PROGRAMMER Introduction Serial eeproms are finding more and more use in electronic devices these days. These small 8 pin devices offer non-volatile data storage and require minimal I/O lines to connect to them. This makes them ideal in many microcontroller based applications. The programmer connects to the PC Serial port and is controlled by driver software running on the PC. The software is Windows based will run under Windows9X, 2000&XP EEPROMS SUPPORTED I(2)C EEPROM SDA2526 24C01A SDA2546 24C02 SDA2586 24C04 SDA3506 24C08 SDA3516 24C16 SDA3526 24C32 MICROWIRE EEPROM 24C64/65 (Atmel) 93C06,93C14,93C46,93C57,93C56,93C66,93C76.93C86 AT24C128 (Atmel) AT24C256 (Atmel)AT24C512 (Atmel) M24C128 (Microchip)M24C256 (Microchip) 24C515 (Microchip) , SDA2506 ,2516, Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  10. 10. NSK ARM DEVOLOPMENT KIT (LPC2129) ON BOARD ISP &JTAG1. Board Features:1. LPC 2129 Single-chip 16/32-bit microcontrollers 256KB Flash/128KB RAM2. 4 Channel 10-bit ADC3. 7-Segment LED Display(Multiplexed x4)4. 2 CAN Ports with 2CAN TransRecivers5. A Serial Port for ISP6. An RS232 Serial Port7. On Board JTAG Wiggler for Debugging8. DC Power Supply Connector(12v Ac or Dc)9. Optional USB Socket for Power Supply10. LCD display 2linex16Character11. 24Cxx I2C EEPROM12. 8 LED array13. Matrix Key Pad14. 4 Intruupt Switches15. Buzzer1.2 Package Contents:1. ARM Starter evaluation board2. Serial port Cable3. ARM Starter Kit CD4. Parralel port Cable5. Burg connectors 20 Nos Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  11. 11. NSK 8051 DEVOLOPMENT BOARD Introduction: Our Devolopment Board are made with full effort to make projects without soldering & contacts.40 pin Zip socket is provided so as to make easy to remove chips without Damages.All the I/O’s are routed to Burg connectors .For each Section burg connecters are given , For Example If you want to use 1 led to connect to port 1,Just connect using Burg connector form P1.1 to LED array ,So all the I/O’s are fully isolated from the I/O sections (for testing 89c2051 use 20 pin Adapter ) Board Features: 1. On board Regaulated Power supply 2. Input Power supply - 12v AC or DC 3. A 7-Segment LED Display(Multiplexed x4) 4. An RS232 Serial Port 5. LCD display(optional) 6. 24Cxx I2C EEPROM 7. RTC DS 1302 8. Matrix Key Pad 9. 4 Intruupt Switches 10. Output 5v,12v,GND 11. 8 LED array 12. ULN 2003 high current driver 1.2 Package Contents: 1. 8051 evaluation board 2. CD containing(Softwares & Example Programs) 3. Burg Connectors 20 Nos Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  12. 12. NSK RFID Reader Introduction: The DT125R series RFID Proximity OEM Reader Module has a built-in antenna in minimized form factor. It is designed to work on the industrystandard carrier frequency of 125 kHz. This LF reader module with an internal or an external antenna facilitates communication with Read-Only transponders—type UNIQUE or TK5530 via the air interface. The tag data is sent to the host systems via thewired communication interface with a protocol selected from the modulepinout. The LF DT125R module is best suited for applications in Access Control,Time and Attendance, Asset Management, Handheld Readers,Immobilizers, and other RFID enabled applications. Features ! Selectable UART or Wigand26 ! Plug-and-Play, needs +5V to become a reader ! No repeat reads ! LED/Beeper indicates tag reading operation ! Excellent read performance without an external circuit ! Compact size and cost-effective ! A very efficient module for portable readers. GSM/GPRS Modem Introduction: Introduction This document describes the hardware interface of the SIMCOM SIM300 module that connects to the specific application and the air interface. As SIM300 can be integrated with a wide range of applications, all functional components of SIM300 are described in great detail. Product concept Designed for global market, SIM300 is a Tri-band GSM/GPRS engine that works on frequencies EGSM 900 MHz, DCS 1800 MHz and PCS 1900 MHz. SIM300 features GPRS multi-slot class 10/ class 8 (optional) and supports the GPRS coding schemes CS-1, CS- 2, CS-3 and CS-4. SIM card interface You can use AT Command to get information in SIM card. The SIM interface supports the functionality of the GSM Phase 1 specification and also supports the functionality of the new GSM Phase 2+ specification for FAST 64 kbps SIM (intended for use with a SIM application Tool-kit).Both 1.8V and 3.0V SIM Cards are supported.The SIM interface is powered from an internal regulator in the module having nominal voltage 2.8V. All pins reset as outputs driving low. Logic levels are as described in table Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  13. 13. NSK PIC DEVOLOPMENT BOARD Introduction: Our Devolopment Board are made with full effort to make projects without soldering,lose contacts.40 pin Zip socket is provided so it make easy to remove chips without Damages. All the I/O’s are routed to Burg connectors .For each Section burg connecters are given , For Example If you want to use 1 led to connect to port 1,Just connect using Burg connec- tor form P1.1 to LED array ,So all the I/O’s are fully isolated from the I/O sections RJ-11 Socket is provided for in circuit serial programming through our PIC programmers ( FOR TESTING 8,18,28 PIN CHIPS USE ADAPTERS ) Board Features: 1. On board Regaulated Power supply 2. Input Power supply - 12v AC or DC 3. A 7-Segment LED Display(Multiplexed x4) 4. An RS232 Serial Port 5. LCD display 2linex16Character 6. 24Cxx I2C EEPROM ,ULN 2003 high current driver 7. RTC DS 1302 8. Matrix Key Pad 9. 4 Intruupt Switches 10. Output 5v,12v,GND Package Contents: 1. 8051 evaluation board 2. CD containing(Softwares,Example Programs) 3. Burg Connectors 20 Nos Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  14. 14. NSK I/O INTERFACE BOARDS 12.1 - 4X4 MATRIX KEYPAD 12.2 - MULTIPLEXED7 SEG DISPLAY (com cathode) 12.4 - DC SOLID SATAE RELAY 12.3 - AC SOLID SATAE & STEPPER MOTER DRIVE RELAY (O/P Load-10 Amps) (O/P Load- 5 Amps) I/P - 5-12V I/P - 5-12V 12.5 - USB TO UART CONVERTER 12.6- AT89C2051 DEMO BAORD WITH WITH RX&TX O/P ULN 2003 (CAN BE USED FOR STEPPER &RS-232 LEVEL O/P MOTOR DRIVES UPTO 0.5 A Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  15. 15. NSK 12.7 - 8 CHANNEL RELAY CONTROL BOARD 12.8- LCD DISPLAY INTERFACED BOARD WITH 8 O/P with Power Supply & ULN 2003 I/P HIGH CURRENT DRIVER USING ULN 2003 ,8 I/P & RS -232 CONVERTER 12.9 Embedded Power Supply +5,-5,+12,-12 Variable output from 0 - 24volts Input Voltage 12-0-12 Introduction: MINI PLC The Mini PLC is fully isolated with opto couplers Inputs may be from 5v to 12 volts (under request 24v) . the Outputs will be 12 or 5 VDC (100 MA) This board is very useful for mini Automation .Regulated power supply is Built in Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  16. 16. NSK 13- STEPPER MOTOR DRIVER Introduction: The A/D Stepper Motor Controller IC1 generates four phase drive signals for two phase bipolar and four phase unipolar step motors in microcontroller controlled applications. The motor can be driven in half step, normal and wawe drive modes and on-chip PWM chopper circuits permit switchmode control of the current in the windings. A feature of this device is that it requires only clock,direction and mode input signals. Since the phase are generated internally the burden on the microcontroler and the programmer is greatly reduced. IC2 is a monolithic bridge high current driver Specifications: Input Power Required : 24V DC / 2A Max Power Dissipation : 50 Watts Drive Type : Bipolar Chopper Drive Chop Frequency : 20 Khz Min(Above Audiable Range) Output Device Type : Integrated Monilithitic Circuit Phases : Two Phase Output Current : 0.5 to 2Amps By 0.5A increments Current Setting : Dip Switch Output Resolution : Full Step @ 200 PPR Half Step @ 400 PPR Pulse Input : TTL Level MIn Rise Time: 1 Microsecond MIn Fall Time : 1 Microsecond Signal Active : From Low to High Transition All other Inputs : TTL level sinking type Home Output Type : Open cpllector output Min phase inductance : 0.5 MH Operating Temparature : 0 to 50 c Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com
  17. 17. NSK Contact information For software Downloads &additional information, please visit http://www.nskelectronics.com For sales office addresses, send e-mail to: info@nskelectronics.com NSK Electronics No 66/3 , Sabari Complex S.P. Road , Bangalore - 560 002 Karnataka , India PH NO : 91- 080 - 41575115 , 22892194 Mobile : 09945263589,09740374373 Nsk Electronics , India ©Copyright 2007,All Right Reserved http://www.nskelectronics.com

×