The Patented MECAIR: “full immersion” system consists of a round header tank with fully integrated diaphragm
valves, suitable for dust collector filters and sintered metal fibre filters. The RDP MECAIR 500 series diaphragms valve
has been specifically designed to be mounted onto a round header tank. This valve is exclusively a MECAIR design
and has worldwide patent. The particular design of the MECAIR 500 series diaphragm valve, allows you to fully
optimise the increased flow rate performance this valve has to offer, and also the simple way which you can mount
the header tank onto the filter wall, eliminating the excessive weight of the traditional square header tanks. The
MECAIR header tanks are manufactured and tested 100%, in accordance with the CE directives, 97/23/CE,
87/404/CEE and 90/488/CEE. The relevant directive used for the calculations relating to manufactured of the header
tanks are UNI EN 286/1. This covers all production up to a maximum diameter of 10” while header tanks
manufactured with external diameter of 12” are based upon VSR calculations.
The RDP 200 Series is a range of diaphragm valve
suitable for dust collector applications, in particular
for reverse pulse jet filter cleaning of filter bags, cartridges, envelope
filters, ceramic filters and sintered metal fibre filters. The RDP 200
series valve has the inlet port at 90° to the outlet port.
The RDP 200 series range comprises 7models, from ¾” to 3”,
all with threaded female gas connections. The 1½” model is
available in the single and double diaphragm versions, while
the 2”, 2½” and 3” are all double diaphragm valves,
while the 2”, 2½” and 3” are all double diaphragm valves.
The special design assures an extremely fast opening time,
high flow rates and easy installation. The valves are
constructed in die-cast aluminium and have an anodised protection
treatment which protect them from corrosive and environmental
agents. Bolts and screws are stainless steel.
MTS PR 1/4”
The model MTS PR1/4” -24/DC sequencer is an integrated
model which incorporates the remote pilot valves, model
PR1/4:, which can be pneumatically connected to the
diaphragm valves type “VEM” rather than with electrical
connections. This version has been designed to guarantee the
control of diaphragm valves mounted on pulse jet dust
collector filters containing filter bags or cartridges.
All the technical characteristics comply with the CE directive.
The MTS-PR1/4” conforms to the European Directive
(89/336 EEC and 93/68 EEC).
The electronic microprocessor sequencer model MT uses
advanced microprocessor technology, expressly
designed to control the interval and pulse time of diagrams valves, focusing
on reverse pulse jet system with pneumatic cleaning procedures. All the
technical characteristics satisfy the CE directives which relate to various
protection relating to the terminal board, respecting the distance on
the printed circuit boards, galvanic separation, ect.
Baghouse and Catridge Filter