T e a m P a c e s e t t e r . c o m
OUR PRODUCTS
AND SERVICES

GALVANIZED
Steel substrate and a 99% zinc coating
Need it UL Certified? We do that too
GALVANNEALED
STAINLESS
90% zinc and 10% iron
Stainless steels are iron alloys with a
minimum of 10.5% chromium
Alloying elements enhance formability,
strength and cryogenic toughness
COLD ROLLED
GALVANIZED BONDERIZED
Typically supplied annealed and
temper passed
Zinc phosphate treated galvanized steel
Inhibits corrosion and promotes paint
adherence
ALUMINIZED
Type 1 aluminized has a coating of
approximately 84%
Type 2 aluminized has a coating of
commercially pure aluminum

PROCESSING SERVICES
We provide high-speed precision
steel coil slitting with full loop
capabilities and a combination of
drag pad and roll tension stands
to provide a camber-free product.
Coil slitting prior to metal forming
economically cuts high volumes
of steel to precise widths within
+/- 0.005″. Our slitters are
equipped with packing lines for
quick banding and packaging of
finished products. Each slitter is
capable of applying protective
film (strippable) and oiling.
SLITTING

PROCESSING SERVICES
Precision blanking equipment
produces blanks with tolerances
of +/- .005” for width and +/-
0.015″ for length, as well as
equipped corrective levelers that
elongate the material beyond its
yield point in order to remove
residual stresses and produce
panel flat blanks. Our blanking
lines are designed to process
surface critical material;
additionally, each line is capable
of applying protective film
(strippable) and oiling.
BLANKING

PROCESSING SERVICES
We provide precision cut-to-
length equipment boasting
length tolerances within +/-
0.015″ for dry and +/- 0.031″ for
oiled steel. Precision corrective
levelers elongate the material
beyond its yield point, remove
internal stresses, and produce a
panel flat sheet. We can produce
processing-painted and surface-
critical sheets, and each line is
capable of applying protective
film (strippable) and oiling.
CUT-TO-LENGTH

FINISHING
TOUCHES
Cleaning, priming, and painting extra smooth
steel to precise specifications. We can fulfill
virtually any specified color to meet and exceed
even the most exacting surface and color needs
of our customers.
PREPAINTING
Coated or uncoated steel with a specified pattern
rolled into the surface. Embossing is typically
utilized on food cases, restaurant equipment,
and other exteriors for its aesthetic value. We
help each and every customer get the look and
specifications they want.
EMBOSSING
The process of punching small holes in a specific
diameter and pattern. Perforating is often seen
on products like speakers and intercom facings.
We can service the specialized perforation needs
of each customer.
PERFORATING
Bending and forming steel into parts for
manufacturing. Fabricating can be as complex as
a car body or as simple as a door hinge. From the
complicated to the straightforward, we can make
sure parts are fabricated to each customer’s
exact specifications.
FABRICATING

1045 BIG SHANTY RD
KENNESAW, GA 30144
(770) 919 8000
T e a m P a c e s e t t e r . c o m
THANK YOU