www.onlinehelpstudy.com

1. ACC 349 FINAL EXAM 2016 JULY
downloads here
www.onlinehelpstudy.com
ACC 349 FINAL EXAM 2016 JULY
1) What is the best way to handle manufacturing overhead costs in order to
get the most timely job cost information?
The company should add actual manufacturing overhead costs to jobs as soon as
the overhead costs are incurred.
The company should determine an allocation rate as soon as the actual costs
are known, and then apply manufacturing overhead to jobs.
The company should apply overhead using an estimated rate throughout the
year. D. The company should account for only the direct production costs.
2) At the end of the year, manufacturing overhead has been overapplied. What
occurred to create this situation?
The company incurred more manufacturing overhead costs than the manufacturing
overhead assigned to jobs
The actual manufacturing overhead costs were less than the manufacturing
overhead assigned to jobs
The company incurred more total job costs than the amount budgeted for the
job
Estimated manufacturing overhead was less than actual manufacturing overhead
costs
3) Luca Company overapplied manufacturing overhead during 2006. Which one of
the following is part of the year end entry to dispose of the overapplied
amount assuming the amount is material
A decrease to work in process inventory
A decrease to applied overhead
An increase to finished goods
An increase to cost of goods sold
4) Which of the following would be accounted for using a job order cost
system?

2. The production of textbooks
The production of town homes
The pasteurization of milk
The production of cans of spinach
5) Which one of the following is NEVER part of recording the issuance of raw
materials in a job order cost system?
Debit Manufacturing Overhead
Debit Finished Goods Inventory
Debit Work in Process Inventory
Credit Raw Materials Inventory
Finished Goods Inventory is debited when goods are transferred from work in
process to finished goods, not when raw materials are issued for a job.
What is unique about the flow of costs in a job order cost system?
It involves accumulating material, labor, and manufacturing overhead costs as
they are incurred in order to determine the job cost
Each job is costed separately in a Work in Process subsidiary ledger
Job costs cannot be measured until all overhead costs are determined
There are no costs remaining in Work in Process at year end
7) Which one of the following costs would be included in manufacturing
overhead of a lawn mower manufacturer?
The cost of the fuel lines that run from the motor to the gas tank
The cost of the wheels
Depreciation on the testing equipment
The wages earned by motor assemblers
Depreciation on testing equipment would be included in manufacturing overhead
because it is indirectly associated with the finished product.
8) What broad functions do the management of an organization perform?
Planning, directing, and controlling
Directing, manufacturing, and controlling
Planning, directing, and selling
Planning, manufacturing, and controlling
9) Which of the following represents the correct order in which inventories
are reported on a manufacturer’s balance sheet?
Work in process, finished goods raw materials

3. Raw materials, work in process, finished goods
Finished goods, work in process, raw materials
Work in process, raw materials, finished goods
10) In traditional costing systems, overhead is generally applied based on
machine hours
direct labor
direct material dollars
units of production
11) An activity that has a direct cause-effect relationship with the
resources consumed is a(n)
overhead rate
product activity
cost driver
cost pool
12) A well-designed activity-based costing system starts with
computing the activity-based overhead rate
analyzing the activities performed to manufacture a product
identifying the activity-cost pools
assigning manufacturing overhead costs for each activity cost pool to
products
ACC 349 FINAL EXAM 2016 JULY
13) Which of the following factors would suggest a switch to activity-based
costing?
Overhead costs constitute a significant portion of total costs
Production managers use data provided by the existing system.
Product lines similar in volume and manufacturing complexity
The manufacturing process has been stable
14) All of the following statements are correct EXCEPT that
the objective of installing ABC in service firms is different than it is in a
manufacturing firm
the general approach to identifying activities and activity cost pools is the
same in a service company as in a manufacturing company
activity-based costing has been widely adopted in service industries
a larger proportion of overhead costs are company-wide costs in service
industries
15) What sometimes makes implementation of activity-based costing difficult
in service industries is

4. identifying activities, activity cost plus, and cost drivers
attempting to reduce or eliminate nonvalue-added activities
the labeling of activities as value-added
that a larger proportion of overhead costs are company-wide costs
16) One of Astro Company’s activity cost pools is machine setups, with
estimated overhead of $150,000. Astro produces sparklers (400 setups) and
lighters (600 setups). How much of the machine setup cost pool should be
assigned to sparklers?
$60,000
$90,000
$150,000
$75,000
17) Poodle Company manufactures two products, Mini A and Maxi B. Poodle’s
overhead costs consist of setting up machines, $800,000; machining,
$1,800,000; and inspecting, $600,000. Information on the two products is:
Mini A Maxi B
Direct labor hours 15,000 25,000
Machine setups 600 400
Machine hours 24,000 26,000
Inspections 800 700
Overhead applied to Mini A using activity-based costing is
$1,536,000
$1,664,000
$1,920,000
$1,200,000
18) Poodle Company manufactures two products, Mini A and Maxi B. Poodle’s
overhead costs consist of setting up machines, $800,000; machining,
$1,800,000; and inspecting, $600,000. Information on the two products is:
Mini A Maxi B
Direct labor hours 15,000 25,000
Machine setups 600 400
Machine hours 24,000 26,000
Inspections 800 700
Overhead applied to Maxi B using activity-based costing is
$1,536,000
$1,664,000
$2,000,000
$1,280,000
19) Seran Company has contacted Truckel Inc. with an offer to sell it 5,000
of the wickets for $18 each. If Truckel makes the wickets, variable costs are
$11 per unit. Fixed costs are $12 per unit; however, $5 per unit is
avoidable. Should Truckel make or buy the wickets?

5. Buy; savings = $10,000
Make; savings = $20,000
Make; savings = $10,000
Buy; savings = $25,000
20) Rosen, Inc. has 10,000 obsolete calculators, which are carried in
inventory at a cost of $20,000. If the calculators are scrapped, they can be
sold for $1.10 each (for parts). If they are repackaged, at a cost of
$15,000, they could be sold to toy stores for $2.50 per unit. What
alternative should be chosen, and why?
Repackage; revenue is $5,000 greater than cost
Scrap; incremental loss is $9,000
Repackage; receive profit of $10,000
Scrap; profit is $1,000 greater
21) The cost to produce Part A was $10 per unit in 2005. During 2006, it has
increased to $11 per unit. In 2006, Supplier Company has offered to supply
Part A for $9 per unit. For the make-or-buy decision
incremental costs are $1 per unit
net relevant costs are $1 per unit
differential costs are $2 per unit
incremental revenues are $2 per unit
22) Hartley, Inc. has one product with a selling price per unit of $200, the
unit variable cost is $75, and the total monthly fixed costs are $300,000.
How much is Hartley’s contribution margin ratio?
37.5%
150%
266.6%
62.5%.
Which statement describes a fixed cost?
The amount per unit varies depending on the activity level
It varies in total at every level of activity
It remains the same per unit regardless of activity level
Its total varies proportionally to the level of activity
24) Disney’s variable costs are 30% of sales. The company is contemplating an
advertising campaign that will cost $22,000. If sales are expected to
increase $40,000, by how much will the company’s net income increase?
$28,000
$18,000

6. $6,000
$12,000
25) Variable costing
is required under GAAP
is used for external reporting purposes
is also known as full costing
treats fixed manufacturing overhead as a period cost
26) Which cost is NOT charged to the product under variable costing?
Direct labor
Direct materials
Fixed manufacturing overhead
Variable manufacturing overhead
27) Orbach Company sells its product for $40 per unit. During 2005, it
produced 60,000 units and sold 50,000 units (there was no beginning
inventory). Costs per unit are: direct materials $10, direct labor $6, and
variable overhead $2. Fixed costs are: $480,000 manufacturing overhead, and
$60,000 selling and administrative expenses. The per unit manufacturing cost
under absorption costing is
$18
$16
$27
$26
28) Which of the following is NOT considered an advantage of using standard
costs?
Standard costs can be useful in setting prices for finished goods
Standard costs can reduce clerical costs
Standard costs can make employees “cost-conscious.”
Standard costs can be used as a means of finding fault with performance
29) The difference between a budget and a standard is that
a budget expresses management’s plans, while a standard reflects what
actually happened
standards are excluded from the cost accounting system, whereas budgets are
generally incorporated into the cost accounting system
a budget expresses a total amount while a standard expresses a unit amount
a budget expresses what costs were, while a standard expresses what costs
should be

7. 30) If a company is concerned with the potential negative effects of
establishing standards, they should
offer wage incentives to those meeting standards
set tight standards in order to motivate people
not employ any standards
set loose standards that are easy to fulfill
31) The per-unit standards for direct materials are 2 gallons at $4 per
gallon. Last month, 11,200 gallons of direct materials that actually cost
$42,400 were used to produce 6,000 units of product. The direct materials
quantity variance for last month was
$2,400 favorable
$5,600 unfavorable
$3,200 unfavorable
$3,200 favorable
32) The standard number of hours that should have been worked for the output
attained is 8,000 direct labor hours and the actual number of direct labor
hours worked was 8,400. If the direct labor price variance was $8,400
unfavorable, and the standard rate of pay was $18 per direct labor hour, what
was the actual rate of pay for direct labor?
$15 per direct labor hour
$18 per direct labor hour
$19 per direct labor hour
$17 per direct labor hour
33) The total variance is $10,000. The total materials variance is $4,000.
The total labor variance is twice the total overhead variance. What is the
total overhead variance?
$2,000
$4,000
$3,000
$1,000
34) Manufacturing overhead costs are applied to work in process on the basis
of
standard hours allowed
actual overhead costs incurred
ratio of actual variable to fixed costs
actual hours worked
35) The overhead volume variance relates only to

8. variable overhead costs
both variable and fixed overhead costs
all manufacturing costs
fixed overhead costs
36) If the standard hours allowed are less than the standard hours at normal
capacity
the overhead volume variance will be unfavorable
the overhead controllable variance will be favorable
variable overhead costs will be overapplied
variable overhead costs will be underapplied
37) Gottberg Mugs is planning to sell 2,000 mugs and produce 2,200 mugs
during April. Each mug requires 2 pounds of resin and a half hour of direct
labor. Resin costs $1 per pound and employees of the company are paid $12.50
per hour. Manufacturing overhead is applied at a rate of 120% of direct labor
costs. Gottberg has 2,000 pounds of resin in beginning inventory and wants to
have 2,400 pounds in ending inventory. How much is the total amount of
budgeted direct labor for April?
$12,500
$25,000
$27,500
$13,750
ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM
ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM
ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM
38) Lewis Hats is planning to sell 600 straw hats. Each hat requires a half
pound of straw and a quarter hour of direct labor. Straw costs $0.20 per
pound and employees of the company are paid $22 per hour. Lewis has 80 pounds
of straw and 40 hats in beginning inventory and wants to have 50 pounds of
straw and 60 hats in ending inventory. How many units should Lewis Hats
produce in April?
600
580
630
620
39) At January 1, 2004, Barry, Inc. has beginning inventory of 4,000 widgets.
Barry estimates it will sell 35,000 units during the first quarter of 2004
with a 10% increase in sales each quarter. Barry’s policy is to maintain an
ending inventory equal to 25% of the next quarter’s sales. Each widget costs
$1 and is sold for $1.50. How much is budgeted sales revenue for the third
quarter of 2004?
$57,525
$63,525

9. $42,350
$63,000
40) In most cases, prices are set by the
customers
largest competitor
selling company
competitive market
41) A company must price its product to cover its costs and earn a reasonable
profit in
all cases
its early years
the long run
the short run
42) The cost-plus pricing approach’s major advantage is
it considers customer demand
that sales volume has no effect on per unit costs
it is simple to compute
it can be used to determine a product’s target cost
43) What does cost accounting measure, record, and report
Future costs
Product costs
Managerial accounting decisions
Manufacturing processes
44) Why is factory overhead applied to products and jobs by manufacturing
companies?
Because indirect costs are easy to trace to products and jobs
It provides a more accurate cost of the job or products being processed
Total actual overhead costs can never be accurately determined for production
It allows managers more timely determination of product costs during the
manufacturing process
45) In a job order cost accounting system, the Work in Process account is
a period cost
a control account
closed at year end

10. an expense
46) Managerial accounting
is governed by generally accepted accounting principles
places emphasis on special-purpose information
is concerned with costing products
pertains to the entity as a whole and is highly aggregated
47) A well-designed activity-based costing system starts with
computing the activity-based overhead rate
assigning manufacturing overhead costs for each activity cost pool to
products
identifying the activity-cost pools
analyzing the activities performed to manufacture a product
48) Which of the following is a value-added activity?
Machinery repair
Inventory storage
Engineering design
Inspections
ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM
ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM
ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM
49) Which of the following is a nonvalue-added activity?
Machining
Inspection
Engineering design
Packaging
50) Each of the following is a limitation of activity-based costing EXCEPT
It is more complex than traditional costing
More cost pools are used
It can be expensive to use
Some arbitrary allocations continue

11. 51) Ace Company sells office chairs with a selling price of $25 and a
contribution margin per unit of $15. It takes 3 machine hours to produce one
chair. How much is the contribution margin per unit of limited resource?
$3.33
$45
$10
$5
52) Walton, Inc. is unsure of whether to sell its product assembled or
unassembled. The unit cost of the unassembled product is $16, while the cost
of assembling each unit is estimated at $17. Unassembled units can be sold
for $55, while assembled units could be sold for $71 per unit. What decision
should Walton make?
Sell before assembly; the company will save $15 per unit
Process further; the company will save $1 per unit
Process further; the company will save $16 per unit
Sell before assembly; the company will save $1 per unit
53) Which cost is charged to the product under variable costing?
Fixed manufacturing overhead
Variable manufacturing overhead
Fixed administrative expenses
Variable administrative expenses
54) Which of the following statements is FALSE?
A standard is a unit amount
A standard cost is more accurate than a budgeted cost
The standard cost of a product is equivalent to the budgeted cost per unit of
product
In concept, standards and budgets are essentially the same
55) If standard costs are incorporated into the accounting system
it can eliminate the need for the budgeting process
it may simplify the costing of inventories and reduce clerical costs
approval of the stockholders is required
the accounting system will produce information which is less relevant than
the historical cost accounting system
56) A standard cost is
ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM
ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM

12. ACC 349 FINAL EXAM 2016 JULY ACC 349 FINAL EXAM
the average cost in an industry
a cost which is paid for a group of similar products
the historical cost of producing a product last year
a predetermined cost
57) The per-unit standards for direct labor are 2 direct labor hours at $12
per hour. If in producing 2,400 units, the actual direct labor cost was
$51,200 for 4,000 direct labor hours worked, the total direct labor variance
is
$6,400 favorable
$6,400 unfavorable
$1,920 unfavorable
$4,000 unfavorable
58) If the standard hours allowed are less than the standard hours at normal
capacity, the volume variance
will be favorable
will be greater than the controllable variance
cannot be calculated
will be unfavorable
59) Which of the following statements is FALSE?
The costs that cause the overhead volume variance are usually controllable
costs
The overhead volume variance is favorable if standard hours allowed for
output is greater than the standard hours at normal capacity
The overhead volume variance indicates whether plant facilities were used
efficiently during the period
The overhead volume variance relates solely to fixed costs
60) Looker Hats is planning to sell 600 felt hats, and 700 will be produced
during June. Each hat requires a half yard of felt and a quarter hour of
direct labor. Felt costs $3.00 per yard and employees of the company are paid
$20 per hour. How much is the total amount of budgeted direct labor for June?
$48,000
$3,500
$3,000
$2,400
61) In cost-plus pricing, the markup percentage is computed by dividing the
desired ROI per unit by the
total cost per unit

13. total manufacturing cost per unit
fixed cost per unit
variable cost per unit
62) Which would be an appropriate cost driver for the ordering and receiving
activity cost pool?
Purchase orders
Inspections
Machine setups
Machine hours
63) The first step in activity-based costing is to
identify the cost driver that has a strong correlation to the activity cost
pool
compute the activity-based overhead rate per cost driver
assign manufacturing overhead costs for each activity cost pool to product
identify and classify the major activities involved in the manufacture of
specific products
64) Which one of the following is required in order for an activity base to
be useful in cost behavior analysis?
The activity should always be based on the number of units produced
There should be a correlation between changes in the level of activity and
changes in costs.
The activity should always be a fixed amount
The activity level should be an approved GAAP activity base
65) Which cost is NOT charged to the product under absorption costing?
Fixed administrative expenses
Variable manufacturing overhead
Direct labor
Direct materials
66) A company developed the following per-unit standards for its product: 2
pounds of direct materials at $6 per pound. Last month, 2,000 pounds of
direct materials were purchased for $11,400. The direct materials price
variance for last month was
$600 unfavorable
$11,400 favorable
$300 favorable
$600 favorable

14. 67) The standard rate of pay is $5 per direct labor hour. If the actual
direct labor payroll was $19,600 for 4,000 direct labor hours worked, the
direct labor price (rate) variance is
$500 favorable
$400 unfavorable
$500 unfavorable
$400 favorable
68) Waco’s Widgets plans to sell 22,000 widgets during May, 19,000 units in
June, and 20,000 during July. Waco keeps 10% of the next month’s sales as
ending inventory. How many units should Waco produce during June?
19,000
18,900
19,100
21,000
69) In cost-plus pricing, the target selling price is computed as
variable cost per unit + fixed manufacturing cost per unit + desired ROI per
unit
variable cost per unit + desired ROI per unit
total unit cost + desired ROI per unit
fixed cost per unit + desired ROI per unit
70) Which one of the following is an important feature of a job order cost
system?
Each must be completed before a new product order is accepted
Each job uses similar processes to produce
Each consists of features which distinguish it from the next
Each job has characteristics similar to the next
71) Which of the following represents the two basic types of cost accounting
systems?
Job order and process cost systems
Job order and batch systems
Job order and job accumulation systems
Process cost and batch systems
72) Which one of the following is indirect labor considered?
Product cost
Period cost
Nonmanufacturing cost

15. Raw material cost
73) Which of the following is an element of manufacturing overhead?
Factory workers wages
Plant manager’s salary
Components used in calculators during production
Flour used in manufactured cake mixes
74) Which of the following is NOT typical of traditional costing systems?
Use of a single predetermined overhead rate
Assumption of correlation between direct labor and incurrence of overhead
cost
Use of direct labor hours or direct labor cost to assign overhead
Use of multiple cost drivers to allocate overhead
75) Max Company uses 10,000 units of Part A in producing its products. A
supplier offers to make Part A for $7. Max Company has relevant costs of $8 a
unit to manufacture Part A. If there is excess capacity, the opportunity cost
of buying Part A from the supplier is
$80,000
$70,000
$0
$10,000
76) H55 Company sells two products, beer and wine. Beer has a 10 percent
profit margin and wine has a 12 percent profit margin. Beer has a 27 percent
contribution margin and wine has a 25 percent contribution margin. If other
factors are equal, which product should H55 push to customers?
It should sell an equal quantity of both
Selling either results in the same additional income for the COMPANY
Beer
Wine
77) During December, the capital budget indicates a $280,000 purchase of
equipment. The ending November cash balance is budgeted to be $40,000. Cash
receipts are $840,000, and cash disbursements are $610,000 during December.
The company wants to maintain a minimum cash balance of $20,000. What is the
minimum cash loan that must be planned to be borrowed from the bank during
December?
$0

16. $50,000
$10,000
$30,000
78) Prices are set by the competitive market when
a product is not easily distinguished from competing products
a company can effectively differentiate its product from others
there are no other producers capable of manufacturing a similar item
the product is specially made for a customer
79) The standards and rules that are recognized as a general guide for
financial reporting are called __________.
standards of financial reporting
generally accepted accounting principles
generally accepted accounting standards
operating guidelines
80) Hess, Inc. sells a single product with a contribution margin of $12 per
unit and fixed costs of $74,400 and sales for the current year of $100,000.
How much is Hess’s break even point?
2,133 units
6,200 units
$25,600
4,600 units
81) In what situations will a static budget be most effective in evaluating a
manager’s effectiveness?
The company has no fixed costs.
The planned activity levels match actual activity levels.
The company has substantial variable costs.
The company has substantial fixed costs.
82) The primary purpose of the statement of cash flows is to __________.
facilitate banking relationships
provide information about the cash receipts and cash payments during a period
prove that revenues exceed expenses if there is a net income
provide information about the investing and financing activities during a
period
83) The category that is generally considered to be the best measure of a
company’s ability to
continue as a going concern is
A. cash flows from operating activities.
B. cash flows from investing activities.
C. cash flows from financing activities.

17. D. usually different from year to year.
84) Of the items below, the one that appears first on the statement of cash
flows is
A. noncash investing and financing activities.
B. net increase (decrease) in cash.
C. cash at the end of the period.
D. cash at the beginning of the period.
85) Which of the following transactions does not affect cash during a period?
A. Write-off of an uncollectible account
B. Collection of an accounts receivable
C. Sale of treasury stock
D. Exercise of the call option on bonds payable
86) One of Lara Dole Company’s activity cost pools is machine setups, with
estimated overhead of $300,000. Dole produces flares (400 setups) and health
packs (600 setups). How much of the machine setup cost pool should be
assigned to flares?
$0.
$120,000.
$150,000.
$180,000
87) As compared to a high-volume product, a low-volume product
A. usually requires less special handling.
B. is usually responsible for more overhead costs per unit.
C. requires relatively fewer machine setups.
D. requires use of direct labor hours as the primary cost driver to ensure
proper allocation
of overhead