1.
Power factor correction Varplus2, VarplusCan & VarplusBox
Varplus2 Modular capacitors are 3 phase, 50 Hz and are using
HQ protection system providing protection against high
and low current faults. Life time: 130,000 hours (15 years)
Safety of personnel: internal discharge resistance
Varplus • Aluminum can enclosure
Can • Self-healing + overpressure disconnector
• Ambient temperature: -25/+55°C Class D and up to 70°C
• Life time: Up to 150,000 hours
• Degree of protection : IP30, (IP54 on request)
Varplus • Steel box enclosure
Box • Self-healing + overpressure disconnector
• Ambient temperature: -25/+55°C Class D and up to 70°C
• Life time: Up to 160,000 hours
• Degree of protection: IP30, (IP54 on request)
Varplus2 Tụ điện loại 3 pha, 50Hz có hệ thống bảo vệ HQ,
chống lại những sự cố do dòng điện cao và thấp.
Tuổi thọ: 130,000 giờ (15 năm)
Bảo vệ con người: điện trở xả bên trong
Varplus • Vỏ tụ bằng nhôm
Can • Tự hàn + cách ly khi quá áp suất
• Nhiệt độ xung quanh: -25/+55°C Class D và đến 70°C
• Tuổi thọ đến 150,000 hours
• Cấp độ bảo vệ: IP30, (IP54 yêu cầu)
Varplus • Vỏ tụ bằng thép
Box • Tự hàn + cách ly khi quá áp suất
• Nhiệt độ xung quanh: -25 /+55°C Class D và đến 70°C
• Tuổi thọ đến 160,000 hours
• Cấp độ bảo vệ: IP30, (IP54 yêu cầu)
Varplus2
Capacitors
Varplus2
Unit price (excl.VAT) in USD
Type Unit PriceReference
51311
51315
51317
51319
51321
176.97
189.92
198.55
205.02
215.81
Voltage (V)Power (kVar)
5
7.5
10
12.5
15
400
400
400
400
400
VarplusCan Capacitors
VarplusCan
Type Unit PriceReference
BLRCS050A060B40
BLRCS075A090B40
BLRCS104A125B40
BLRCS125A150B40
BLRCS150A180B40
BLRCS200A240B40
BLRCS250A300B40
35.08
52.62
70.16
87.71
105.25
140.33
175.41
Voltage (V)Power (kVar)
5
7.5
10
12.5
15
20
25
400
400
400
400
400
400
400
VarplusBox Capacitors
VarplusBox
Type Unit PriceReference
BLRBS075A090B40
BLRBS104A125B40
BLRBS125A150B40
BLRBS150A180B40
BLRBS208A250B40
BLRBS250A300B40
BLRBS500A600B40
BLRBS750A900B40
BLRBSX00AX20B40
78.94
87.71
109.63
131.56
175.41
219.26
438.53
855.13
1,140.18
Voltage (V)Power (kVar)
7.5
10
12.5
15
20
25
50
75
100
400
400
400
400
400
400
400
400
400
Accessories
Varplus2
Type Unit PriceReference
51459
51461
29.01
37.67
1 set of 3-phase copper bars for connection
and assembly of 2 and 3 capacitors
1 set of protective cover (IP20) and
cable glands (IP42) for 1, 2 and 3 capacitors
Detuning reactor controller harmonic suppression inductor
12.5
50
Power (kVar) Unit PriceReference
52352
52354
612.36
1,152.00
Varlogic power factor controller
Varlogic NR6
Varlogic NR12
Type Unit PriceReference
52448
52449
640.93
802.70
Number of step output contact
6 steps
12 steps
Please contact our distributors or Schneider Electric for further information. Vui lòng liên hệ nhà phân phối hoặc Schneider Electric để biết thêm chi tiết 87

2.
Order form Masterpact NT and NW order form
To indicate your choice, check the applicable square boxes Indication contacts
OF - ON/OFF indication contacts
and enter the appropriate information in the rectangles Standard 4 OF 6 A-240 V AC (10 A-240 V AC and low-level for NW)
Alternate 1 OF low-level for NT Max. 4 qty
Additional 1 block of 4 OF for NW Max. 2 qty
Circuit breaker Quantity EF - combined "connected/closed" contacts
or switch-disconnector 1 EF 6 A-240 V AC for NW Max. 8 qty
Masterpact type NT NW 1 EF low-level for NW Max. 8 qty
Rating A SDE - "fault-trip" indication contact
Sensor rating A Standard 1 SDE 6 A-240 V AC
Circuit breaker N1, H1, H2, H3, L1 Additional 1 SDE 6 A-240 V AC 1 SDE low level
Special circuit breaker H2 anticorrosion, H10 Carriage switches Low level 6 A-240 V AC
Switch-disconnector NA, HA, HF, HA10, ES CE- "connected" position Max. 3 for NW/NT qty
Number of poles 3 or 4 CD- "disconnected" position Max. 3 for NW - 2 for NT qty
Brand MG SD CT- "test" position Max. 3 for NW - 1 for NT qty
Option: neutral on right side AC - NW actuator for 6 CE - 3 CD - 0 CT additional carriage switches qty
Type of equipment Fixed Remote operation
Drawout with chassis Remote ON/OFF MCH - gear motor V
Drawout without chassis XF - closing voltage release V
(moving part only) MX - opening voltage release V
Chassis alone PF - "ready to close" contact Low level
Earthing switch kit for chassis 6 A-240 V AC
Micrologic control unit BPFE - electrical closing pushbutton
A - ammeter 2.0 5.0 6.0 Res - electrical reset option (only can choose
between Res or RAR)
V
P - power meter 5.0 6.0
RAR - automatic reset optionH - harmonic meter 5.0 6.0
Choose only 1 option, Res or RARLR- long-time rating plug Standard 0.4 to 1 Ir
Remote tripping MN- undervoltage release VLow setting 0.4 to 0.8 Ir
MN + R - delay unit (non-adjustable) VHigh setting 0.8 to 1 Ir
MN + Res- adjustable delay unit VLR OFF
2nd MX - shunt release VAD - external power-supply module V
If you choose 2nd MX, please don not choose any option MNBAT - battery module
LockingTCE - external sensor (CT) for neutral
VBP - ON/OFF pushbutton locking (by transparent cover + padlocks)and residual earth-fault protection
OFF position locking:TCE - external sensor (CT) for over sized neutral
VCPO- by padlocks(3P - Micrologic P / H) and residual earth-fault protection
VSPO - by keylocks Keyock kit (w/o keylock) Profalux RonisTCW - external sensor for SGR protection
1 keylock Profalux RonisRectangular sensor NT (280 x 115 mm)
2 identical keylocks, 1 key Profalux Ronisfor earth-leakage protection NW (470 x 160 mm)
2 keylocks, different keys (NW) Profalux Profalux RonisPTE - external voltage connector
Chassis locking in "disconnected" position:Communication
VSPD- by keylocks Keyock kit (w/o keylock) Profalux RonisCOM module JBus/ Device
Kirk CastellModBus
1 keylock Profalux RonisDigipact Device
2 identical keylocks, 1 key Profalux RonisEco COM ModBus
2 keylocks, different keys Profalux Ronismodule (for XF or MX communicating release)
Optional connected/disconnected/test position lockConnection
VPEC -door interlock On right-hand side chassisHorizontal Top Bottom
On left-hand side chassisVertical Top Bottom
VPOC - racking interlockFront Top Bottom
IPA - cable-type door interlockInterphase barriers NT, NW fixed, drawout
VDC - mismatch protection
VIVC - shutter position indication and locking for NW
IBPO - racking interlock between crank and OFF pushbutton for NW
DAE - automatic spring discharge before breaker removal for NWMicrologic control unit functions:
Accessories2.0 : basic protection (long time + inst.)
CDM - mechanical operation counter NT, NW5.0 : selective protection (long time + short time + inst.)
CB - auxiliary terminal shield for chassis NT, NW6.0 : selective + earth-fault protection
CC - arc chute cover for fixed NT(long time + short time + inst. + earth-fault)
CDP- escutcheon NT, NW7.0 : selective + earth-leakage protection
CP- transparent cover for escutcheon NT, NW(long time + short time + inst. + earth-leakage)
OP- blanking plate for escutcheon NT, NW
Brackets for mounting NW fixed On backplates
Test kits Mini test kit Portable test kit
Chassis
Chassis
7.0
7.0
7.0
Please contact our distributors or Schneider Electric for further information. Vui lòng liên hệ nhà phân phối hoặc Schneider Electric để biết thêm chi tiết88