Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Zebra print soap


Published on

Zebra print melt and pour soap recipe by Natures Garden

Published in: Self Improvement
  • Be the first to comment

  • Be the first to like this

Zebra print soap

  1. 1. Zebra Print Soap Recipe makes 4 pounds of soapSHEA BUTTER Melt and Pour SOAPBLACK Colored Melt and Pour SoapSquare Loaf- Mold Market MoldsBite Me Fragrance OilCutter for Mitre Box - Stainless SteelMitre Box - Stainless Steel8 oz. Clear PET Bullet BottlesBlack Fine Mist Sprayers 24/410Cutting BoardStainless Steel Measuring SpoonsMicrowave Safe Glass ContainerLarge KnifeRubbing Alcohol (in spray bottle)
  2. 2. 2 lbs. Shea Butter Melt and Pour Soap Base2 lbs. Black Melt and Pour Soap Base2 oz. Bite Me Fragrance OilClean & Sanitize your work area and all of your packaging materials. It is suggested that you weargloves, protective clothing, and a hair net while preparing this recipe.1. Cut your soap base along the perforation. Each layer will use 4-6 cubes; depending on the stripesthis can vary. For this recipe we have approximately 8 layers.2. Melt 6 cubes of Shea Butter Melt and Pour Soap Base in the microwave. Heat the base for 30seconds at a time until it is completely melted.3. Add one teaspoon of Bite Me fragrance oil. Stir. You will add at least a teaspoon of fragrance oil toeach layer of soap that you pour; using a total of 2 oz. of Bite Me fragrance oil for the entire recipe.4. Pour the mixture into the mold. If you notice any air bubbles, spray them with the rubbing alcohol.5. Allow this layer to form a skin. While you are waiting, prepare your next layer. This time use theBlack Melt and Pour Soap Base. Prepare the same way you did the Shea Butter soap.6. In order to create angles to the layers use something to prop the mold up slightly on one side.7. Repeat this process until the mold is full. Allow to cool at room temp, or refrigerate to help soaprelease from the mold.8. Remove the soap from the mold. Cut the soap using the mitre box and cutter.Natures Garden is not responsible for the performance of any of the recipes provided on our website.Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility toadhere to all FDA regulations. If there are ingredients listed in a recipe that Natures Garden does notsell, we cannot offer any advice on where to purchase those ingredients.