A project report on Home Automation System using Android Application Via Bluetooth.

1. HOME AUTOMATION
A
Project Report
Submitted
In partial fulfilment
For the award of the Degree of
Bachelor of Technology
in Department of Electronics and Communication Engineering
Submitted To: Submitted By:
Mr. Nidhish Tiwari Anisha Eldho
Asst. Professor Hemant Saini
Electronics & Communication Naman Gautam
Department Mahesh Chipa
Punit Jangir
Department of Electronics and Communication Engineering
JagannathInstitute of Engineering and Technology
Rajasthan Technical University
2012-2016

2. ACKNOWLEDGEMENT
We would like to express our gratitude to Mr. Nidhish Tiwari, Head of research and development
of JNIT, who enabled us to complete this project successfully in all aspects. We also express our
sincere thanks to Dr. J. P. Agarwal, Principal of JNIT for his encouragement in completing this
project. We are grateful to Mr. Dhruv Rathore , Chairperson of Vision World Tech Pvt Ltd, for
providing important guidance regarding this project. We would like to thank Mr. Radhey Shyam,
member of Vision World Tech. Pvt. Ltd. who provide important guidance during project
development.
We would like to thank to all the staff members, both teaching and non-teaching who helped us in
all possible way to make this project successful.
I

3. ABSTRACT
Home automation involves introducing a degree of computerized or automatic control to certain
electrical and electronic systems in a building. A hardware system is installed to monitor and
control the various appliances. The system would control the appliances based on its configuration.
For example, it could automatically turn on the lights at a specified time in the evening, or it could
measure the ambient light using a hardware sensor and turn on the lights when it grows dark. For
example, one could turn on the air conditioning from the office, before leaving for home.
This project demonstrates a simple home automation system that allows the user to control it with
a wireless device such as a Bluetooth enabled mobile phone. The system allows the user to control
each of the lights and fans individually. It can automatically turn off the main lights and turn on a
night lamp at a specified time. By measuring the signal strength, it can detect when the user enters
a room and automatically turn on the light and fans, and then automatically turn them off when
the user leaves the room.
II