Measurement Engineering for Heating and Installation
01-68-098X-027X-Title 27.01.2011 14:13 Seite 1 1 Committing to the future Authorized distributor for Azerbaijan Republic INNOTEC LLC, tel: +99455 6610664, email: email@example.com 2011 web: www.innotec.az, www.testo.com Measurement Engineering for Heating and Installation
02-03-098X-027X-Introduc 27.01.2011 14:14 Seite 2 2 Combustion points under control New opportunities: The market for the supply of heat to buildings is Playing it safe. changing constantly. Solar systems, heat pumps and other Measuring instruments must be reliable and efficient. For this reason, technologies, integrated concepts for energy supply and electronic once developed we do not regard our products as being ready for the control systems have established themselves. The objectives remain market. Instead, we subject them to tough tests in the field. It is only the same - demand controlled heat supply, low energy consumption when these tests are successful that we start with serial production. and low emissions. All measuring instruments which leave our factory undergo quality inspections. Regardless of the technology involved – every furnace must function 100%; regular checks and tuning are therefore required. Our Spoilt for choice? contribution: We supply the best measurement engineering. We It is impossible to find another product line with so many well- follow all developments attentively, we are there wherever there is engineered, mobile gas analysers as we have. We admit that that something going on. We recognise trends far in advance and can could sometimes make the decision more difficult for you but you are therefore offer well-engineered applications ahead of the competition. guaranteed that you are working with the best suited product for your You have rewarded us for our commitment by making us number one measurement job. Regardless for which flue gas analyser you decide, worldwide in the heating engineering sector. you can be assured that the gas paths are optimised i.e. are kept as short as possible. Susceptibility and corrosion are thus avoided. The results of your measurements are made available immediately. User- friendly and intelligible operation, a well thought-out accessory and measurement case system ensure that you can work – efficiently, fast and professionally.
02-03-098X-027X-Introduc 27.01.2011 14:14 Seite 3 3 Electrochemical gas sensors with added value! The sensors specially developed for Testo have an above-average "Do you have a lifetime of 2-3 years. The extended service life of sensors in testo 330 LL by up to 6 years for O2 and CO is revolutionary and enormously heating fitter in reduces follow-on costs for the user. Another outstanding feature is measuring instruments in which you can exchange the sensor yourself – without the need for test gas calibration. Back in operation R&D?" immediately – couldn´t be quicker. The cheapest measuring instrument sometimes turns out to be the most expensive... Heating problems in Winter. A true emergency! And your flue gas analyser breaks down today of all days! This is where we come in. We are proud of the top quality service we provide. Edgar Mesam, Mesam GmbH Learning changes Heating and Plumbing What was that? What flue gas flows are permitted according to the Edgar Mesam grins as he asks this question regulations governing wood furnaces? We offer in-depth in the course of a conversation about the documentation and leaflets on Testo Measurement Engineering, quality of our products. The committed owner current standards and guidelines and their implementation. of a heating and plumbing business in Bannholz has been a customer of Testo for many years. As a heating fitter, he is committed to protecting the environment. We asked him to speak about his experience with Testo products. Edgar Mesam: "We are mainly involved in the maintenance and upkeep of existing systems. It is not as spectacular as the installation of renewable energy technology (which we also do, of course) but the potential for saving energy is huge. A defective system can use more than 50% more energy compared with a system in good working order and just an incorrectly adjusted system can mean increased power consumption of 20 to 30%. My most important tool for adjusting heating systems is first-class measurement engineering which I get from Testo – all- inclusive, from the flue gas analyser to the fiberscope and everything that goes with it. In my own experience – and I have been in the business for 20 years – no other manufacturer meets the requirements in the field like Testo does with its products. Another important point: With Testo, I don´t have to grapple with the measurement engineering I get, I can select what I need for my requirements from the wide range of equipment and accessories within an instrument line. Keep up the good work! I´m already looking forward to the newest innovations which have always convinced me up to now!
04-05-098X-027X-Overview 27.01.2011 14:15 Seite 4 The right flue gas analyser for eve testo 308 Page 6 testo 327 Page 8 testo 330 LL Page 12 testo 350-S Page 26 For g heatin s system
04-05-098X-027X-Overview 27.01.2011 14:15 Seite 5very requirement Top instrument for extreme demands testo 350-S Special long-life version for heating fitters and technicians testo 330-1 LL Special long-life version for chimneysweeps, customer service and maintenance technicians testo 330-2 LL Basic instrument for heating technicians and installation testo 327-1 Convenient basic instrument for heating technicians and installation testo 327-2 Checks O2, °C, hPa in oil and gas burners testo 327-O2 Checks CO, °C, hPa in oil and gas burners testo 327-CO Outline testo 327 CO testo 327 O2 testo 327-1 testo 327-2 testo testo 330-1 LL 330-2 LL testo 350-S Adjusting efficiency: TÜV approved O2, CO2, qA, °C, λ Combustion quality: CO flue gas Up to 2000 ppm, for gas systems Up to 4000 ppm, for gas or oil systems with low pollution 8000 ppm, for oil systems with a high pollution level Opt. 30,000 ppm, for oil systems with extreme pollution and solid fuel systems Opt. NO for low NOx inspections Opt. Opt. Opt. Flue draught Differential temperature, adjusting flow and return temperatures Protection of CO sensor via switch-off function Autom. Differential pressure, for adjustment of pressure ratios in gas systems, mbar/hPa 40/200 40/200 40/200 40/200 Probe for detecting gas leaks Protection: Probe for measuring ambient CO Printout with date and time Audible/optical alarm for ambient CO and gas leak detection Immediate stand-by: Convenient sensor exchange without entering coefficient Allocation and processing of information (analysis software) Opt. Opt. Opt. Opt. Built-in data memory, no. of data blocks: 20 200 400 250,000 readings Transmission of readings to PC IrDA USB USB RS 232 Transmission of values to Pocket PC via IrDA IrDA IrDA IrDA Wireless transfer of values to Pocket-PC via BLUETOOTH® Opt. Opt. Opt. Opt. Printer connection with print text Barcode connection State inspection: TÜV approved CO Opt.
06-07-098X-027X-308 27.01.2011 14:17 Seite 6 6 testo 308 – control and service instrument for chimney sweeps and heating engineers Finally: The real measurement, thanks to digital soot count determination The new electronic testo 308 will replace the time-consuming determination of smoke count used up to now. The manual measurement of smoke count, which has been used for Automatic measurement – digital decades, is history. This new soot count measurement to one technology not only offers more decimal space with constant sampling convenience, but also a degree of precision never before achieved in this price class – high-tech for trade experts and chimneysweeps. Whether as a tough tool for flue gas measurements on all kinds of oil burners, or as a starter instrument for new tasks in service and maintenance – the High accuracy – the heated testo 308 is fast, system- measurement spot avoids compatible, extremely reliable measurement errors due to condensation and always ready for use. Infrared interace – time-savings NEW! thanks to automatic evaluation and digital transfer of measurement Now with values Wireless transfer Country permits BLUETOOTH® wireless transfer for the smoke tester testo 308 and the flue gas analyzers testo 327-2 and testo 330 LL The BLUETOOTH® wireless module used by Testo has permits for the following listed countries, and can only be used in those Fast and easy exchange of the LI-ion countries, i. e. BLUETOOTH® wireless transfer battery may not be used in any other country! Europe including all EU member states Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and Turkey European countries (EFTA) Iceland, Liechtenstein, Norway and Switzerland Non-European countries Ukraine, Colombia and El Salvador
06-07-098X-027X-308 27.01.2011 14:17 Seite 7 7 testo 308 – the electronic smoke tester testo 308 testo 308 is the instrument for • Easy, self-explanatory menu easy electronic soot count • Clear segment display measurement. It records the soot count digitally to one • LED display illumination decimal space with constant • Easy IR printout sampling. The powerful LED • Integrated condensate trap A convenient pistol grip backlighting guarantees good (evacuable) ensures that the legibility even under poor light instrument fits • Integrated dirt filter comfortably into the hand. conditions. The instrument excels This allows easy one- (exchangeable) through its easy menu structure hand operation. and ergonomic pistol grip. • TÜV tested • Additional soot count determination on filter paper • Li-ion battery, (2600 mA, 45 individual measurements), chargeable inside or outside the instrument The integrated • Mains operation possible condensate trap can be evacuated. The high-contrast display is backlit and has a self- • Battery and charger from testo explanatory menu 327 and testo 330 can be used • BLUETOOTH interface (optional) testo 308 testo 308 / BLUETOOTH® • Easy exchange of soot filter roll testo 308 smoke tester incl. testo 308 smoke tester with • Spare battery chargeable rechargeable battery and calibration BLUETOOTH® interface incl. separately or in instrument protocol for measuring soot count rechargeable battery and calibration protocol for measuring soot count • Protection class IP40 Part no. 0632 0308 Part no. 0632 0309 TÜV tested 1. BImSchV TÜV By RgG 269 Set testo 308 Set testo 308 / BLUETOOTH® Technical data Set testo 308 smoke tester incl. mains Set testo 308 smoke tester with unit and bag BLUETOOTH® interface incl. mains Optical analysis unit and bag Sensor Photodiode Meas. range 0 to 6 RZ Resolution 0.1 RZ Part no. 0563 3080 Part no. 0563 3090 Accuracy ±0.2 RZ Measurement sample volume Accessories Ordering data Part no. Pump capacity 1,63 ± 0,1 l Instrument bag for smoke tester testo 308 0516 0002 Reference filter at 990 mbar and +20 °C ambient temperature Dimensions, Weight 100-240 V AC / 6.3 V DC international mains unit, for mains operation or battery charging in instrument 0554 1096 Dimensions 270 x 63 x 120 mm Weight 600 g incl. battery Probe holder for smoke tester testo 308 and flue gas probes 0554 0616 Power supply Rech. battery Lithium ion battery, 2600 mA Spare battery 2600 mA 0515 0107 Battery life 45 individual measurements Charger for spare battery 0554 1103 Battery charge in the instrument via mains unit or externally by charger General technical data Spare soot filter paper (8 paper rolls) 0554 0146 Display Segment display with background illumination Spare dirt filters (10 off) 0554 1101 Norms and tests 1. BlmSchV, METAS, EU-guideline 2004/108/EG Oper. temp. 0 to +40 °C Cone with fixing screw 0554 9010 Storage temp. -20 to +50 °C Testo fast printer with wireless infrared interface, 1 roll thermal paper and 4 AA batteries 0554 0549 Protection class IP40 Interfaces IR/IRDA interface, BLUETOOTH® Basic system case for analyzer, probes and accessories 0516 3330 Gas sampling Stainless steel pipe ca. 220 mm, rubber hose 100 mm Shaft length 330 mm, suitable for smoke tester testo 308 0440 1115 Warranty 2 years
08-09-098X-027X-327-1 27.01.2011 14:18 Seite 8 8 testo 327 – Robust and fast-action flue gas analyser for all important parameters Do you manage to get home by 5pm every day? Probably not, because your job expects above-average dedication. You also need partners who Hans-Dieter Guth, won´t let you Excellent display Market Manager down. We are clearness even in Contractors BU, unfavourable lighting leading the way Germany conditions with our quality service. Check it out for yourself. Do you need an accessory, do you have a question about measuring or do you need a replacement instrument? – Testo Service employees are at your service in many locations – also Fast probe connection: All near you. Good to know when gas paths are connected the situation requires. with one "click" Sensors are as easy to change as a battery Latest Li-ion rechargeable batteries
08-09-098X-027X-327-1 27.01.2011 14:19 Seite 9 9 testo 327-1 – Basic instrument for heating and installation technicians testo 327-1 testo 327-1 is your introductory • Easy menu navigation instrument to flue gas analysis. It • 4 line segment display measures combustion efficiency, °C, O2, CO2, CO and flue • LED display light draught. The strong LED • Easy IR printout background light in the 4 line display guarantees an easy-to- • Built-in condensate trap read display even if lighting • TÜV By RgG 253 acc. to Stable probes filter conditions are unfavourable. The particles before they get 1. BImSchV analyser stands out on account into gas paths of its easy menu navigation and • EN 50379 Part 2 for O2, °C, ergonomic housing as well as its hPa durability. • EN 50379 Part 3 for CO • Small Li-ion rechargeable battery (1200 mA, lifetime of 5 h) can be recharged inside or outside instrument • Fast probe connection using single probe plug Built-in condensate trap • Ambient CO measurement using flue gas probe • O2 dual wall measurement (can The "second skin" is integrated into the instrument be stored) design and protects from impact and shock during tough everyday use • Separate AT temperature measurement • Undiluted CO measurement testo 327-1 testo 327-1 CO (can be stored) testo 327-1 flue gas analyser, testo 327-1 CO flue gas analyser, • Draught measurement rechargeable battery and calibration rechargeable battery and calibration protocol included, measures O2, CO, protocol included, measures CO, hPa • 6-8 fuels (country-specific (e.g. hPa and °C and °C UK=6)) Part no. 0632 3201 Part no. 0632 3204 • IP 40 testo 327-1 O2 testo 327-1 O2 flue gas analyser, rechargeable battery and calibration protocol included, measures O2, hPa and °C Part no. 0632 3203 Technical data Temperature measurement -40 to +600 °C Draught measurement ±40 hPa Efficiency measurement (Eta) 0 to 120% Flue gas loss (qA) 0 to 99.9% testo 327-1 Basic Set for heating and installation O2 measurement 0 to 21 Vol. % technicians CO2 measurement 0 to CO2 max · testo 327-1 flue gas analyser incl. rech. batteries and calibration protocol CO measurement 0 to 4000 ppm · Mains unit 100-240 V for mains operation or battery charging in instrument Weight Approx. 500 g · Compact flue gas probe, 180 mm long, Ø 6 mm Dimensions 216 x 68 x 47 mm · Combustion air temperature probe, immersion depth 190 mm Storage temp. -20 to +50 °C · Fast printer with wireless infrared interface Oper. temp. -5 to +45 °C · Instrument cleaner 100 ml Power supply via Li-Ion rechargeable battery · Basic system case for instrument, probes and accessories Battery life >5h Warranty 2 years on instrument, probes and gas sensors 1 year on thermocouple and rechargeable battery (wearing parts excluded) Part no. 0563 3203 70
10-11-098X-027X-327-2_16.2.2011 22.02.2011 15:07 Seite 10 10 testo 327-2 – Service instrument for heating technicians and inspectors testo 327-2 The testo 327-2 service analyzer • Life expectancy of gas sensors measures combustion efficiency, up to 3 years testo 327-2 Set for heating fitters °C, O2, CO2, CO and flue • Assurance thanks to instrument · testo 327-2 flue gas analyzer incl. rech. battery and calibration protocol draught. The bright LED backlight and sensor diagnosis · Including option: CO-H2 measurement in the 4-line display guarantees · Mains unit 100-240 V for mains operation or battery charging in instrument an easy-to-read display even if • IR and IRDA interface for easy · Modular flue gas probe, 300 mm long, Ø 8 mm, TÜV approval lighting conditions are reading out of data to printer or · Combustion air temperature probe, immersion depth 190 mm unfavourable. The analyzer Pocket PC · Hose connection set for separate gas pressure measurement · Fast printer with wireless infrared interface stands out on account of its easy • BLUETOOTH® wireless transfer · Flexible probe shaft, 330 mm long, Ø 10 mm, Tmax. 180°C menu navigation and ergonomic (optional) · Instrument cleaner, 100 ml housing as well as its durability. · Basic system case for instrument, probes and accessories • Delta T measurement testo 327-2 enthuses the user with additional useful features • Delta P measurement: 2 Part no. 0563 3202 70 such as the data store (20 measurement ranges measurements), differential • Store (20 readings) temperature measurement to determine flow and return • Li-ion rechargeable battery Complete set testo 327-2 temperatures or differential (2,400 mA), 10 hr lifetime with smoke tester für heating constructors pressure measurement to adjust • TÜV By RgG 254 acc. to · Exhaust gas analyzer testo 327-2 incl. battery and calibration protocol pressure ratios in gas systems. 1. BImSchV · Including option: CO-H2 measurement · Smoke tester testo 308 Official measurements on gas · Mains unit 100-240 V for mains operation or charging the battery in the • CO option with H2 burners in accordance with EN instrument compensation · Modular flue gas probe, length 300 mm, Ø 8 mm, TÜV tested 50379 Part 2 are also possible · Combustion temperature probe, immersion depth 190 mm thanks to the option of a H2 • Official test in accordance with · Hose connection set for separate gas pressure measurement compensated CO sensor. EN standard 50379-2 for °C; · Fast report printer with wireless infrared interface The IrDa interface opens O2, hPa, Part 3 for CO · Flexible probe pipe, length 330 mm, Ø 10 mm, Tmax. 180°C · Instrument cleaner 100 ml communication options with a • Optional Part 2 for CO with H2 · Basic system case for instrument, probes and accessories Pocket PC. compensation Part no. 0563 3202 77 testo 327-2 Set for heating inspectors NEW!* · testo 327-2 flue gas analyzer incl. rech. battery and calibration protocol Now with testo 327-2 · Including option: CO-H2 measurement · Mains unit 100-240 V for mains operation or battery charging in instrument testo 327-2 flue gas analyzer, · Modular flue gas probe, 300 mm long, Ø 8 mm, TÜV approval rechargeable battery and calibration · Combustion air temperature probe, immersion depth 190 mm protocol included, measures O2, CO, · Dual wall clearance probe for measuring O2 in input air hPa and °C Wireless transfer · CO multiple hole probe shaft, 300 mm long, Ø 8 mm Part no. 0632 3202 · Flexible probe shaft, 330 mm long, Ø 10 mm, Tmax. 180°C · Instrument cleaner, 100 ml Technical data · Basic system case for instrument, probes and accessories Temperature measurement -40 to +600 °C Draught measurement ±40 hPa Part no. 0563 3202 71 Pressure measurement ±200 hPa Efficiency measurement (Eta) 0 to 120% Flue gas loss (qA) 0 to 99.9% O2 measurement 0 to 21 Vol. % Complete set testo 327-2 CO2 measurement 0 to CO2 max with smoke tester for chimneysweeps CO measurement 0 to 4000 ppm · Exhaust gas analyzer testo 327-2 incl. battery and calibration protocol Option CO measurement (H2-compensated) 0 to 8000 ppm · Including option: CO-H2 measurement · Smoke tester testo 308 Weight Approx. 500 g · Mains unit 100-240 V for mains operation or charging the battery in the Dimensions 216 x 68 x 47 mm instrument · Modular flue gas probe, length 300 mm, Ø 8 mm, TÜV tested Storage temp. -20 to +50 °C · Combustion temperature probe, immersion depth 190 mm Oper. temp. -5 to +45 °C · Dual wall clearance probe for O2 draught air measurement Power supply via Li-ion rechargeable battery · CO multiple hole probe pipe, length 300 mm, Ø 8 mm · Flexible probe pipe, length 330 mm, Ø 10 mm, Tmax. 180°C Battery life > 10 h · Instrument cleaner 100 ml Warranty 2 years on instrument, probes and gas sensors · Basic system case for instrument, probes and accessories 1 year on thermocouple and rechargeable battery (wearing parts excluded) Part no. 0563 3202 78 *Country permits BLUETOOTH® wireless transfer see page 12
10-11-098X-027X-327-2_16.2.2011 22.02.2011 15:07 Seite 11 11 Accessories testo 327 Instrument/Options Part no. testo 327-1 flue gas analyser, rechargeable battery and calibration protocol included, measures O2, CO, hPa and °C 0632 3201 testo 327-1 O2 flue gas analyser, rechargeable battery and calibration protocol included, measures O2, hPa and °C 0632 3203 testo 327-1 CO flue gas analyser, rechargeable battery and calibration protocol included, measures CO, hPa and °C 0632 3204 testo 327-2 flue gas analyzer, rechargeable battery and calibration protocol included, measures O2, CO, hPa and °C 0632 3202 Upgrade/Options Part no. Option: CO-H2-measurement for testo 327 0440 3273 Option: fine draught measurement, resolution 0.1 Pa, measurement range up to100 Pa (instead of standard draught measurement) - for testo 0440 3271 327-1, 327-1 O2/CO and testo 327-2 Option: fine differential pressure measurement, resolution 1 Pa; for testo 327-2 only 0440 3272 Option: BLUETOOTH® module 0344 0011 Retrofits Part no. Retrofit: O2 measurement for testo 327-1 CO Spare sensors Part no. Spare O2 sensosr for testo 327-1, 327-1 O2 0390 0047 Spare CO sensor for testo 327-1, 327-1 CO 0390 0046 Spare O2 sensor, Testo-specific 0390 0092 Spare CO sensor, Testo-specific, (without H2 compensation) 0390 0095 Spare CO sensor, Testo-specific (H2 compensated) 0390 0109 Accessories Part no. 100-240 V AC / 6.3 V DC international mains unit for mains operation or battery charging in instrument 0554 1096 Spare rech. batt. w/ charging station 0554 1087 Li-ion battery pack 0515 0100 Testo fast printer with wireless infrared interface, 1 roll thermal paper and 4 AA batteries 0554 0549 Spare thermal paper for printer (6 rolls), permanent ink 0554 0568 Instrument cleaner (100 ml) 0554 1207 Smoke tester with oil, soot sheet, for measuring soot in flue gas 0554 0307 Spare soot filter paper (8 paper rolls) 0554 0146 Hose connection set for separate gas pressure measurement 0554 1203 Full version easyheat and easyheat.mobile. Software package for PC and Pocket PC. (for testo 327-2 only) 0554 1210 ISO calibration certificate/flue gas 0520 0003 Differential temperature set consisting of 2 Velcro probes and temperature adapter 0554 1208 Spare particle filter (10 off) for probe handle; for modular flue gas probe 0554 3385 Spare particle filter (10 off) for probe handle; for compact flue gas probe 0554 0040 Cases Part no. Basic system case for instrument , probes and accessories 0516 3334 Probes Part no. Compact basic flue gas probes available in two lengths, probe stop, NiCr-Ni thermocouple, 1.5 m hose and particle filter included Compact flue gas probe, 180 mm long, Ø 6 mm, Tmax. 500°C 0600 9740 Compact flue gas probe, 300 mm long, Ø 6 mm, Tmax. 500°C 0600 9741 Modular flue gas probe from the testo 330 product line, available in 2 lengths, probe stop, NiCr-Ni thermocouple, 2.2 m hose and particle filter included Flue gas probe, 180 mm long, Ø 8 mm, Tmax 500 °C, TÜV approval 0600 9760 Flue gas probe, 300 mm long, Ø 8 mm, Tmax 500 °C, TÜV approval 0600 9761 Flue gas probe, 180 mm long, Ø 6 mm, Tmax 500 °C 0600 9762 Flue gas probe, 300 mm long, Ø 6 mm, Tmax 500 °C 0600 9763 Flexible flue gas probe, 330 mm long, Tmax. 180 °C, short-term 200 °C, bending radius max. 90° for measuring at inaccessible points 0600 9764 Probe accessories Probe shaft, 180 mm long, Ø 8 mm, Tmax 500 °C 0554 9760 Probe shaft, 180 mm long, Ø 6 mm, Tmax 500 °C 0554 9762 Probe shaft, 300 mm long, Ø 8 mm, Tmax 500 °C 0554 9761 Probe shaft, 335 mm long, with probe stop, Ø 8 mm, Tmax 1000 °C 0554 8764 Flexible probe shaft, 330 mm long, Ø 10 mm, Tmax 180 °C 0554 9764 Multi-hole probe shaft, 300 mm long, Ø 8 mm, for mean CO calculation 0554 5762 Multi-hole probe shaft, 180 mm long, Ø 8 mm, for mean CO calculation 0554 5763 Modular flue gas probe handle 0440 3334 Hose extension, 2.8 m, extension cable for probe and analyser 0554 1202 8 mm probe stop, steel, with spring clamp and handle, Tmax 500 °C 0554 3330 6 mm, probe stop, steel, with spring clamp and handle, Tmax 500 °C 0554 3329 Additional probes Dual wall clearance probe for O2 supply air measurement 0632 1260 Combustion air temperature probes Combustion air temperature probe, immersion depth 300 mm 0600 9791 Combustion air temperature probe, immersion depth 190 mm 0600 9787 Combustion air temperature probe, immersion depth 60 mm 0600 9797 Quick-action surface probe with sprung thermocouple strip, measuring range short-term to +500 °C 0604 0194
12-17-098X-027X-330 27.01.2011 15:00 Seite 12 12 testo 330-1 LL – Flue gas analysis with increased convenience and reliabilty 2 3 Understand flue gas analysis at a glance: The flue gas matrix The central element of the new graphic processing of the measurement data is the 1 4 flue gas matrix.The new colour graphic The flue gas matrix display of the flue gas analyzer testo 330 LL visualizes the measurement data graphically: Self-explanatory graphic curves as well as easy symbols and clear colour design ease the analysis of the measurement data considerably. 1 In the course of the flue gas measurement, this shows whether the CO and O2 values, as well as other measurement parameters, are in the green, permitted range, and the heating system is thus optimally adjusted. Thumb symbols instantly show the status of the system. If the CO and O2 concentrations measured are in the green range, the thumbs point up. 2 Bad combustion – the CO concentration is over the defined limit User-friendly operation value, the recorded CO content is not Robust quick-action within the ideal range probe connection for all gas paths 3 Measurement value is not acceptable – the CO and O2 concentrations are considerably too high, the measurement values do not correspond to the prescribed norms and limit values 4 High loss – the O2 concentration is over the defined limit value, the heating system is not working efficiently More convenience Easy-to-change rech. batt. and sensors, rech. batt. life > 8 hours, sensor life > 6 years optional Wireless transfer* Absolutely robust See page 6 for more informations High CO display range up to 30,000 ppm on account of patented dilution (testo 330-2 LL)
12-17-098X-027X-330 27.01.2011 14:24 Seite 13 13 The advantages of the new flue gas analyzer testo 330 LL: Understand flue gas analysis at a glance · High-resolution colour display for the graphic representation of your measurement data · Extended measurement menus such as Tightness testing for comprehensive analysis of the heating system · Logger function for easy long-term recording of the measurement curve 18.01.10 14:35 18.01.10 14:35 14.09.09 14:35 Testo AG Testo AG Testo AG Natural gas Natural gas Natural gas Measurements Measurements Folders Flue gas Fuels Fine pressure probe Protocols Draught measurement Instrument settings Sensor settings CO undiluted Program Smoke count/ HCT Instrument diagnosis Differential temperature OK Fuel OK Location Options Main menu – select adjustment function Select one of the pre-set measurements Measurement data can be graphically visualized and quickly analyzed The measurement menus – the right menu for every measurement task: Flue gas Smoke number/HCT Oil flow rate Draught measurement Differential pressure CO ambient Fine pressure probe Differential temperature CO2 ambient BImSchV O2 input air Automatic burner CO undiluted Gas flow rate Gas pipe tests The sensor diagnosis – long life with even more security Thanks to the extended sensor life of up to 6 years for The O2 long-life sensor stands out against the O2 and CO in the testo 330 LL, the follow-on costs standard sensor through a more stable design, an for the user are drastically reduced. At least one O2 improved diffusion barrier to protect the anode and CO sensor replacement is saved during the material and a lead-free metal alloy. It is therefore not course of the typical phase of use of the instrument. In only more durable but also more environmentally addition to this, Testo gives 4 years’ warranty on the friendly. complete instrument incl. O2 and CO sensors and probe.
12-17-098X-027X-330 27.01.2011 14:25 Seite 14 14 Typical measurement menus Flue gas measurement… Advantages of the new flue gas matrix: is the central measurement in flue gas analysis. By determining the main values, · The flue gas matrix acts as an CO and O2, as well as other measurement adjustment assistent for the main parameters, a judgement can be made as values O2 and CO to whether your heating system is properly · The optimization of the adjustment is adjusted or whether there is a need for much easier – the interpretation of the optimization. numerical values is no longer necessary Different display options offer the right · Thanks to the trend display, the presentation of the measurement values, measurement curve can be followed depending on requirements: exactly, and the measurement point · 4- to 8-line as numerical values precisely determined. Testo AG · 4 measurement values simultaneously · The automatic zoom function provides LPG presented in a line graph an enlarged and clear display of the Measuring current detail of the flue gas matrix 122.3 °C AT 5.8 qA · Main values O2 and CO, as well as further measurement values, graphically displayed as a flue gas matrix Ideal ranges ≤ 100 ppm CO ≤ 4 % O2 The CO concentration is in the range of bad combustion. The instrument Options Stop Values provides information on the ideal range. The gas pipe test… is divided into 4 measurements which Advantages of the new testo 330 LL: guarantee a comprehensive test of the · Thanks to prescribed measurement gas pipe: Gas tightness test, usability test, procedures, the desired test can be gas fitting tightness test and leakage conducted quickly and easily detection. After selecting the desired measurement, the testo 330 LL begins · The testo 330 LL leads the user through directly with the corresponding gas pipe the measurement step by step, check. A separate gas leak detection presenting the the corresponding probe is required for leakage detection. information in the display The gas tightness test can be conducted · The measurement data are displayed over a period of 10 minutes. The gas in easy and clear diagrams fitting tightness test is coonducted over a period of one minute directly under Testo AG operating conditions. Natural gas Gas pipe tests Leakage test Usability Gas fitting tightness test Leak detection The four measurements for testing Setting OK Location the gas pipe
12-17-098X-027X-330 27.01.2011 14:28 Seite 15 15 The draught measurement… begins directly after the selection of the Advantages of the new testo 330 LL: corresponding measurement menu. After · Graphically supported measurement the zeroing of the pressure sensor, the menu for the determination of the flue determination of the differential pressure draught with parallel core flow search between the surroundings and the flue takes place. · Thanks to the integrated switchover valve technology, the testo 330-2 LL can remain in the flue during zeroing. In the testo 330-1 LL, the probe must be removed from the flue for zeroing · The set alarm threshold will be shown directly on the display Testo AG Natural gas Measurement FT max. FT Draught The result of the measurement: a Underpressure negative pressure exists (-4.31 hPa) Graph Start Save Zeroing sonsor Display view in the course of the measurement during sensor zeroing The CO environment measurement... determines the CO concentration in the ambient air. Advantages of the new testo 330 LL: The measurement is presented in a simple graph. If the CO concentration is in the green range, the · Easy, graphic presentaion of the recorded concentration is permitted and the alarm adjustable alarm thresholds threshold is not exceeded. The red danger range indicates a too high, not permitted CO · With the help of the trend display, the concentration. measurement curve can be followed · The cursor marks the current CO concentration · The instrument not only indicates the violation of the alarm threshold optically, it also provides an audible alarm Testo AG Natural gas Alarm threshold 30 ppm CO 22 ppm COamb Danger The CO concentration is in the permitted range. The alarm threshold is not exceeded Options Stop Save
12-17-098X-027X-330 27.01.2011 14:29 Seite 16 16 Typical measurement menus The differential pressure measurement ΔP… takes place after selection of the Advantages of the new testo 330 LL: measurement menu "Differential pressure". · The measurement curve of the After setting up the pressure difference differential pressure measurement can required for the measurement, the be followed directly in the line diagram measurement curve can be followed directly in the display over a defined · Using the logger function, the period. measurement curve can be recorded over a defined period of up to 120 minutes 14.09.09 14:35 Testo AG Natural gas Line diagram of the differential pressure Options Stop ΔP in a period of 3:15 mins Continuous measurement of the differential pressure ΔP over e. g. 5 mins The fine pressure probe – highest accuracy in the Pascal range The fine pressure probe is directly Simultaneous gas pressure measurement connected to the flue gas analyzer testo and flue gas analysis is possible with the 330 LL. The different measurement menus fine pressure probe. The gas pressure and the measurement results are shown in measurement can be carried out in logger the display of the testo 330 LL. operation, thus conducting a long-term measurement. The following menus with buffer stores are available: Thanks to the zero point calibration at 1 second intervals, external temperature · parallel draught measurement influences have no effect on the · parallel ΔP measurement measurement value. 14.09.09 14:35 Testo AG · 4Pa measurement Natural gas · heating check For the measurement of the ambient E draught temperature or the surface temperature, an additional temperature probe can be E draught Individual P measurement connected. E delta P Program Die Feinstdrucksonde kann problemlos hest a ccu 4 Pa measurement an jedem Messort befestigt werden – mit H ig ra Bügel oder Magnet cy Heating check thanks to OK als The instrument firmware and the erv zer "easyheat" software are retrofittable free int o- oin nd of charge: p t ad co www.testo.com/easyheat/Update. just me at 1 -se nt
12-17-098X-027X-330 27.01.2011 14:30 Seite 17 17 Easy, mobile data management for flue gas analysis The software package testo easyheat The Pocket-PC-Software easyheat.mobile and easyheat.mobile supports wireless communication to Windows Mobile appliances. This allows wireless transfer The new top technology in flue gas of measurement data to a mobile appliance on measurement: the instrument series testo site. 330 LL with extended sensor life communicates not only with a PC, but also with a Pocket PC. Different software Printout of the data from a Pocket PC or directly packages give the customer the possibility of from the measuring instrument takes place via adapting the testo 330 LL exactly to his the IrDA/Bluetooth printer. communication needs. With the help of the PC software easyheat, the management of customer data, as well as the measurement sites and the already completed measurements, can be carried out easily on a PC at home. USB / IrDA / Bluetooth USB / IrDA / Bluetoothe USB / IrDA / IrDA / Bluetooth Bluetooth Wireless transfer* IrDA / Bluetooth Smoke tester testo 308 Information at www.testo.com * Country permits BLUETOOTH® wireless transfer for Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Non-European countries the smoke tester testo 308 and the flue gas analyzer Denmark, Estonia, Finland, France, Germany, Great Britain, Ukraine, Colombia and El Salvador testo 330 LL Greece, Hungary, Ireland, Italy, Latvia, Lithuania, The BLUETOOTH® wireless module used by Testo has Luxembourg, Malta, Netherlands, Poland, Portugal, permits for the following listed countries, and can only be Romania, Slovakia, Slovenia, Spain, Sweden and Turkey used in those countries, i. e. BLUETOOTH® wireless European countries (EFTA) transfer may not be used in any other country! Iceland, Liechtenstein, Norway and Switzerland Europe including all EU member states
18-25-098X-027X-330 27.01.2011 14:54 Seite 18 18 The probes – the right accessories for every application The robust and easy-to-hold probe handle detected by the instrument and the are shown as a graphic trend display in a makes positioning easier. The probe has a measuring results appear immediately in dedicated menu. quick-release fastener. This ensures that all their own respective graphically supported gas paths are connected and confusion is menu. Moreover, the adjustable alarm Thanks to the integration of the gas impossible. The dirt filter housed in the threshold is linked to an acoustic signal. tightness test into the measurement menu, handle reliably filters out dirt. In addition, all relevant tests on gas pipes can be the probes are extremely easy to look after The entire scope of measurements during conducted without a separate measuring and easy to clean. A range of lengths and checks can be carried out alongside the instrument– the new testo 330 LL diameters ensure a high degree of flexibility flue gas measurement. integrates the gas tightness test. All that is for all applications. On replacement, the required for this is the connection of the The gas leak detection probe that can be probe shaft is simply placed on the probe pressure set for gas pipe tests to the testo connected to the instrument also has an handle and it engages. Multi-hole and 330 LL. The testo 330 LL guides the user adjustable alarm threshold; a warning tone annular gaps probes complete the line of through the entire measurement, and is emitted if it is exceeded. The probe is flue gas probes. Both the ambient CO facilitates it by the graphic processing of also detected automatically and the results probe and the CO2 probe are automatically the measurement data. The flue gas analyzer testo 330-1 LL at a glance The testo 330 LL is the reliable companion –- whether in cases of malfunction or emergency, when monitoring legally set limit values, or in day-to-day maintenance work. New features of the testo 330 LL: Other features: • Colour graphic display with 240 x 320 Pixel • Reduced follow-on costs thanks to LL sensors with 4 years’ • Graphic processing of measurement data guarantee • Instrument diagnosis function uses easy "traffic light presentation • Li-ion rechargeable battery - life: >6 h with pump running to enable comprehensive error diagnosis. • Rechargeable battery can be charged separately and in • Logger function for long-term measurements instrument • New measurement menus, e. g. Gas pipe test • TÜV-tested according to 1. BImSchV / EN 50379 Part 2 for O2, °C, hPa and CO with H2-compensation • Pressure measurement up to 300 mbar • User-defined fuels A measuring instrument with great ease of communication: • Memory management: 500,000 readings Only for testo 330-2 LL • IrDa/ Bluetooth interface • In CO measurement, from 8.000 ppm, automatic dilution is carried out up to min. 30,000 ppm CO • USB interface • Integrated gas and draught zeroing without probe removal: The • ZIV (Central Guild Association) driver for industry software probe can remain in the flue during zeroing packages WARR AN EN 50379-2 and optionally with * Exceptions: Typical wearing parts: 4 YEAR TY: Rechargeable battery and S* 1. BImSchV thermocouple (1 year) NO/COlow sensor (2 years), filter
18-25-098X-027X-330 27.01.2011 14:54 Seite 19 19
18-25-098X-027X-330 27.01.2011 14:54 Seite 20 20 Convenient introductory analyser in the pro class for heating technicians and fitters testo 330-1 LL The major advantage of flue gas New features of the testo 330 LL: analysers lie in their dialog • Colour graphic display feature: instrument diagnosis with 240 x 320 Pixel provides information about the • Graphic processing of measurement data qualitative status of functions at • New instrument design the touch of a button; for example, the level in a • Instrument diagnosis function uses easy condensate trap but also wearing "traffic light presentation to enable parts such as the condition of the comprehensive error diagnosis gas sensors. Maintenance • Logger function for long-term intervals are displayed allowing measurements you to plan better. The times • New measurement menus, e. g. Gas pipe when an analyser let the user test down all of a sudden are a thing • Pressure measurement up to 300 mbar of the past. • User-defined fuels Modular probes such as ΔT, ΔP, flue gas are recognised Other features: automatically by the analyser so • Reduced follow-on costs thanks to LL that measurement results appear sensors with 4 years’ guarantee immediately in the display. • Life expectancy up to 6 years (O2 / CO) The probes have a probe quick- • At least 1 sensor replacement is saved in release device with which all of the course of a normal working life the gas paths are connected • Powerful Li-ion rechargeable battery - life: without mix-upss. The single >6 h with pump running, no memory cable is rigid, indestructible, effect, no deep discharge saves space and creates order. • Rechargeable battery can be charged Flue gas measurement in a burner The particle filter is located separately and in instrument directly in the probes handle. • TÜV-tested according to 1. BImSchV / Probe shafts with different EN 50379 Part 2 for O2, °C, hPa and CO lengths and diameters can be with H2-compensation testo 330-1 LL Flue gas analyzer with easily attached to the probe longlife gas sensors, Bluetooth and handle. A measuring instrument with great H2-compensated CO cell, incl. rech. ease of communication: battery and calibration protocol • 500,000 readings Part no. 0632 3306 70 LL • IrDa/ Bluetooth interface • USB interface • ZIV (Central Guild Association) driver for all standard industry software packages Technical data Temperature -40 to +1200 °C 4 Year Warranty on Draught measurement -9.99 to +40 hPa Instrument and Probe Pressure measurement 0 to 300 hPa (testo 330-1 LL) O2 measurement 0 to 21 Vol. % CO measurement (without H2 compensation) 0 to 4000 ppm CO measurement (H2-compensated) 0 to 8000 ppm Efficiency measurement (Eta) 0 to 120% Flue gas loss 0 to 99.9% The Longlife set for heating constructors and fitters CO2 measurement Display range 0 to CO2 max Option: COlow measurement 0 to 500 ppm Flue gas analzyer testo 330-1 LL (O2 and COH2) incl. Bluetooth, rech. battery Option: NO measurement 0 to 3000 ppm and calibration protocol Ambient CO measurement (with CO probe) 0 to 500 ppm 100-240 V mains unit for mains operation or charging the rechargeable battery Gas leak measurement for combustible Display range 0 to 10,000 ppm in the instrument gases (with gas leak detection probe) CH4 / C3H8 Combustion air temperature probe, immersion depth 190 mm Ambient CO2 measurement (with ambient CO2 probe) 0 to 1 Vol. % Hose connection set for separate gas pressure measurement 0 to 10000 ppm testo Bluetooth printer with mains unit General Technical data Basic system case flat Memory 500.000 readings Flue gas probe length 300 mm, Ø 8 mm, Tmax. 500 °C Weight 600 g (without rechargeable battery) Dimensions 270 x 90 x 65 mm Storage temp. -20 to +50 °C Oper. temp. -5 to +45 °C Display Graphics display 240 x 320 pixel Power supply Rech. batt. block 3.7 V / 2.6 Ah Mains unit 6 V / 1.2 A Part no. 0563 3371 70 Warranty Instrument/probe/gas sensors (O2, CO) 4 years NO, COlow sensor 2 years Thermocouple and rech. battery 1 year See pages 24 + 25 for Accessories Ordering Data