Laptop Aid 1.7

878 views

Published on

D.I.Y. Design for (Every)One

Published in: Design
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
878
On SlideShare
0
From Embeds
0
Number of Embeds
277
Actions
Shares
0
Downloads
3
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Laptop Aid 1.7

  1. 1. http://designforeveryone.howest.be/
  2. 2. Laptop Aid 1.7 http://designforeveryone.howest.be/ Marc Van Strydonck / Kevin Deprez ± 56,5 hours € 28,67 http://laptophulp2011.blogspot.com
  3. 3. ASSEMBLY MANUAL http://designforeveryone.howest.be/
  4. 4. <ul><li>BILL OF MATERIAL </li></ul><ul><li>- Screws: €3,99 </li></ul><ul><li>Varnish: €5,54 </li></ul><ul><li>Glue (wood): €4,45 </li></ul><ul><li>Side hinges: €3,11 </li></ul><ul><li>Top hinges: €2,39 </li></ul><ul><li>5 block wooden beams (190x310x2100): €6,80 </li></ul><ul><li>1 flat wooden beam (190x900x2100): €2,39 </li></ul>LAPTOP AID 1.7 Tools: Saw, drill, screwdriver, sandpaper, varnish, glue, screws Standard parts: 2 top hinges and 2 side hinges Tailored parts: Wooden beams
  5. 5. DESCRIPTION Saw the wooden beams to the right size. Look at the technical drawings for the part dimensions. These dimensions can be adjusted for your own size! LAPTOP AID 1.7 Technical plans: Yes Duration: 30 minutes Saw Standard parts: No Tailored parts: Wooden beams Action cost: No 1
  6. 6. DESCRIPTION Drill the wholes into the wooden beams. Look at the technical drawings to know where the wholes need to be drilled. LAPTOP AID 1.7 2 Technical plans: Yes Duration: 30 minutes Drill Standard parts: No Tailored parts: Wooden beams Action cost: No
  7. 7. 3 DESCRIPTION Rub all of the surfaces with sandpaper until they are smooth enough, so you will not harm yourself when using the product. LAPTOP AID 1.7 Technical plans: No Duration: 1 hours Sandpaper Standard parts: No Tailored parts: Wooden beams Action cost: No
  8. 8. 4 DESCRIPTION The tailored parts are assembled with screws. Between the surfaces we used glue to strenghten the product. ATTENTION: If you are righthanded, mirror the assembly. Don’t forget to mirror the book support as well. LAPTOP AID 1.7 Technical plans: Yes Duration: 3 hours (glue drying included) Glue and screwdriver Standard parts: No Tailored parts: Wooden beams Action cost: No
  9. 9. 5 DESCRIPTION The tailored parts are assembled with screws. Between the surfaces we used glue to strenghten the product. LAPTOP AID 1.7 Technical plans: Yes Duration: 3 hours (glue drying included) Glue and screwdriver Standard parts: No Tailored parts: Wooden beams Action cost: No
  10. 10. 6 DESCRIPTION Varnish the front and back and let it dry. Rub the parts a little bit with sandpaper and varnish it again. This will ensure a clean surface finishing. ATTENTION: Before varnishing, make sure the surface of the mouse pad is smooth enough. LAPTOP AID 1.7 Technical plans: No Duration: 2x24 hours (varnish drying included) Varnish Standard parts: No Tailored parts: Wooden beams Action cost: No
  11. 11. 7 DESCRIPTION Fasten the top hinges. LAPTOP AID 1.7 Technical plans: No Duration: 10 minutes Screwdriver Standard parts: Top hinges Tailored parts: No Action cost: No
  12. 12. 8 DESCRIPTION Fasten the side hinges LAPTOP AID 1.7 Technical plans: No Duration: 10 minutes Screwdriver Standard parts: Side hinges Tailored parts: No Action cost: No
  13. 13. 9 LAPTOP AID 1.7
  14. 14. TECHNICAL ADDENDUM http://designforeveryone.howest.be/
  15. 30. TEAM CONTACTS http://designforeveryone.howest.be/
  16. 31. [email_address] TEL +32 4 72 450 300 [email_address] TEL +32 4 74 772 128 [email_address] TEL +32 4 97 601 940 [email_address] TEL +32 9 220 99 78 http://designforeveryone.howest.be/

×