SlideShare a Scribd company logo

Manikandan Energy Engineer

My Resume

1 of 8
Download to read offline
MANIKANDAN .S Email id : manikandansudalaimani@gmail.com
D/83, TNHB COLONY,
ANBU NAGAR EXTENSION, Mobile : +91-9585666958
TIRUNELVELI – 627 011.
OBJECTIVE
To be a striving personality adapting to the needs of the company with great efficiency and be a part of
a team that helps in achieving the organization’s success.
ACADEMIC AND PROFESSIONAL DEVELOPMENT
Course
Board of
Examination
Institution Year Performance Class
ME-ENERGY
ANNA
UNIVERSITY,
CHENNAI
CEG, ANNA UNIVERSITY
MAIN CAMPUS,
CHENNAI -25
2013-2015
7.8
(CGPA)
FIRST
CLASS
BE-MECH
ANNA
UNIVERSITY,
TIRUNELVELI
Dr.Sivanthi Aditanar
College of Engineering,
Tiruchendur-215
2007-2011 76%
FIRST
CLASS
HSC
STATE
BOARD,
TAMIL NADU
St. Xavier’s Hr. Sec. School,
Palayamkottai-02
2007 68.42%
FIRST
CLASS
SSLC
STATE
BOARD,
TAMIL NADU
St. Xavier’s Hr. Sec. School,
Palayamkottai-02
2005 83.60%
FIRST
CLASS
SEMESTER WISE MARKS SECURED (P.G. & U.G.)
SEMESTER I II III IV V VI VII VIII
P.G. – CGPA 8.22 7.62 7.4 8 - - - -
U.G. – PERCENTAGE 71 74.11 70 73.4 70.8 77.5 80.13 90.29
SOFTWARES & AREAS OF INTEREST
• Energy Software’s Proficiency : eQUEST, SMART ENERGY, ANSYS ( FLUENT - THERMAL)
• Other Software’s Proficiency : PROE – (PROCABLING), AUTOCAD, MS OFFICE
• Areas of Interest : GREEN BUILDING, HVAC, CRYOGENICS, ENERGY AUDIT
P.G PROJECT
Title : COMPARATIVE ENERGY ANALYSIS OF HVAC USING BICS & CONVENTIONAL COOLING
Industry : GSH ( INDIA ) PRIVATE LIMITED – CHENNAI
DESCRIPTION :
Energy is one of the critical inputs for economic development of any country. Developing countries
like India accounts for only 40 % of world’s total energy consumption, while constituting 80 % of
world’s total population.
The present study deals with an innovative approach that has been identified for energy
conservation in HVAC systems by taking advantage of the surrounding environment. To examine
this concept, experiment will be conduct on two uni – dimensional concrete roof structures one with
Radiant cooling or Building Integrated Cooling System (BICS) and other with a conventional roof.
A grid of copper pipes, in parallel arrangement, had been scientifically designed, fabricated and laid
on one roof, while the other will left bare. Water will be circulated through these tubes. Parallel
layout of tubes had been preferred for availing the advantage of better temperature difference
between the pipe surface and cooling water.
Building structure cooling helps to neutralize the solar heat load there by reducing the room
temperature. A temperature reduction of about 30 % will be attaining by implementing the concept
of BICS.
This project details the design, thermodynamic aspects, energy conservation analysis and the
economical benefits accrued by implementing the concept of BICS vis – a – vis conventional
buildings.
U.G PROJECT
Title : CYCLE TIME REDUCTION IN 500MW BOILER DRUM MANUFACTURING USING CPM
Industry : BHEL-TIRUCHY
DESCRIPTION :
In this competitive world the products should come to the market in a faster manner. For that the
cycle time of the manufacturing processes should be reduced. Then only the productivity rate will
be increased.
Various manufacturing processes for a boiler drum are studied and the process chart was drawn.
The critical path was determined by using Critical Path Method (CPM).
We can reduce the total number of shifts and cycle time to complete the Boiler Drum Manufacturing
by determining the appropriate Man-Days per shift.
Feasibility studies are done, to determine the activity in which cycle time reduction is practical.
The implementation of the suggested improvements in this project will lead to increased
productivity, shorter lead times, reduced various cost & Increased profit.
EXPERIENCE & INTERNSHIP DETAILS: Total 4.2 Years Exp., (including Internship)
1. Organization : Green Tree Buildings Energy Pvt., Ltd., Delhi
Designation : Senior Energy Analyst
Department : Building Energy Modeling and Simulation
Period : July 2015 to Present – 5 Months
Profile activities :
• Support the bid team
• Perform an initial review of the client requirements when an Invitation to Tender documents is
received
• Allocate the requirements to the required system and functions and manage these requirements
throughout the engineering process
• Work with Architect, Structural & Draftsmen in an integrated design approach
• Vetting of MEP Design Basis Reports, Drawings and BOQ
• HVAC, Thermal and Renewable Energy Calculations
• Consolidation of Monthly Progress Report and Client meetings as and when required.
• Check compliance of building with Local Building codes and Documentation as per Regulatory
Authorities.
• Code Compliance Energy Modelling (Appendix G – ASHRAE 90.1, LEED - USGBC, IGBC, ECBC, GRIHA)
• Recommend energy conservation measures to improve energy performance of building. Main
Categories of energy conservation measures fall under Building Envelope, HVAC and Lighting
• Energy Simulation Study simulates the energy required in a building at the drawing board level of a
building design using real time data and weather conditions of that particular place. This process
also gives us the measure of the energy that will be consumed in that building as per various
national and international standards. This helps us to set the bench mark level of energy
consumption for a particular building.
• Energy Simulation Study helps you to take informed decision in the design and construction of the
buildings from an Energy Consumption point of view. Building Energy simulation tool which help us
decide the right or optimum material and equipment specifications in a scientific and systematic
manner.
• Preparation of Energy Simulation Reports and Energy Credits documentations as per type of
Certification standards.
• Few Green Building Projects :
a. Gardenia Eco City, Noida - IGBC
b. JM Orchid- IGBC Gold Rated
c. Rajiv Gupta Residence, Gurgaon - IGBC
d. JM Aroma, Noida - IGBC
e. Skytech Matrott – High-rise Residential Noida – IGBC Platinum Rated
f. BSF 50 Bed Hospital Jodhpur GRIHA
g. Elite Homes, NewDelhi - IGBC Gold Rated
h. Mansion de Salam – Dhaka, Bangladesh USGBC
2. Organization : Alliance Tire Group, Tirunelveli
Designation : Production Planning & Control Engineer
Department : Production Planning & Control
Period : June 2011 to August 2013 – 2.3 Years
Profile activities :
• Daily Morning Input Raw Materials Inventory have been taken in the Mixing Area, Extruder Area,
Marangoni Area and output inventory have been taken in the Ware House then purchasing Raw
material schedule is prepared depends on this inventory.
• Daily PPS (3S/D) is prepared and issued to Mixing Area, Beading, 3 Roll Calender, 4 Roll Calender,
Bias Cutter, Tire Building, Marangoni, Tire Curing and Maintenance Dept.,.
• The Production Tonnage calculated for Tire Building and Tire Curing at the end of the shifts.
• Tire Building Plant Capacity 110 Tonnage per day and Tire Curing Plant Capacity 120 Tonnage / day.
• We achieved 6 times plant full capacity in Tire Building and Tire Curing, more times we crossed 100
Tonnage in Tire Building and Tire Curing during my working period.
• Monthly once , industry statics in the 1st shift and Total Inventory have been taken then we make the
inventory report within 4 days after that send the report to Head office Purchasing Dept.
• During this period Monthly Maintenance work had been done.
3. Organization : GSH (India) Private Limited
Designation : Intern
Department : ENERGY
Period : July 2014 to May 2015 – 11 Months
Profile activities :
• Identifying the area of high energy consuming sources and designing and developing energy efficient
processes in such areas.
• Introducing innovative energy efficient processes and implementing the same in the organization
for high energy efficiency
• Conducting on-site and field observations, collecting energy efficiency data, and analyzing the
process of energy efficiency used
• Evaluating energy efficiency by reviewing architectural, mechanical, and electrical plans of the
organization, consulting the engineers for installation of energy efficient systems like climate control
systems, day lighting design, etc., and preparing technical reports for implementation of energy
efficient designing
• Taking pivotal role in creating awareness about energy efficient systems installed and actively
participating in encouraging the use of alternative energy resources
• Conducting energy audits / research on alternative sources of energy, performing lab experiments,
evaluating the results in terms of energy usage, conservation measure, cost effectiveness, etc., using
mathematical and computer models for better implementation of energy management projects
• Managing the construction, designing, and development of energy management projects as per the
guidelines from the federal department and the budget requirement, performing energy modeling,
verification, and commissioning as per the large-scale industrial process
• Coordinating with the project management team for overall analysis of energy management system
installation
• Carrying out negotiations with fuel providers as per service agreements and managing costs and
revenues while negotiating the tariff of new and existing supplies
4. Client : AXIS IT&T
Software : PRO-E Wildfire 4.0
Designation : Intern – Design Engineer
Department : Electrical Wiring Harness – Procabling Design
Period : November 2010 to May 2011 – 7 Months
Profile activities :
• Circuit, Modeling ,Detailing , Harness drawing and Group drawing creation.
• Detail drawing creation for Cabling components like Connectors, Terminals, etc.
• Harness Design, Flattening , Harness drawing creation for CAT Trucks .
• Group Modeling, Group drawings creation for CAT Trucks.
• Schematic Diagram creation, 3D routing, Flattening, Wiring Harness Drawing ,Group drawing.
• Error Report Generation, Wires, Circuits, Compare Diagrams, Automatic updates, etc.
• Layer Control Methods, Datum plane, datum feature, datum targets, Process & Software based
approach of 3D Harness as per CAT standards & Requirements.
• Study of Catterpillar drawings, Views, Sections, Internal and External feature dimensions.
GREEN BUILDING & HVAC DESIGN WORKSHOP – 1 WEEK
Day 1
Climate Change, Ozone Depletion and Cooling Systems
The Environmental Challenge – When cooling interiors means global warming
Need for appropriate cooling systems & Alternative cooling strategies in the context of energy
efficiency and climate change mitigation
Building Energy Performance in India – Concepts & Examples
Introduction to Integrative Design – ‘Performance by Design’
Thermal Comfort and Indoor Air Quality – Concepts, measurements and standards
Passive Cooling systems and Techniques
Day 2
Sustainable Cooling Technologies
Active cooling – Efficient HVAC systems
Natural Refrigerant based Air conditioning ( Unitary & Centralized Systems)
Direct & Indirect Evaporative cooling Systems
Radiant Cooling Techniques
Solar Vapour Absorption Systems
Site Visit – Olympia Tech Park, Guindy (IGBC Green Gold Rated Building)
Day 3
Green Building Concepts, Materials, Performance and Economics
Government Policies and regulations – ECBC, Voluntary Green rating systems and Star rating
Systems for Buildings and equipment, Brief comparisons of various rating systems
Integration of green building concepts in mainstream industry practices : Case Studies :
Performance by Design, Rocky Mountain Institute – Complete Documentary
Site Visit – Dakshin Chitra Architecture Museum ( To understand passive cooling techniques)
Day 4
Learning by Doing – Practical Understanding of Energy modeling through software
simulation
Introduction to Energy Modelling : Theory of Heat load Simulation with Smart Energy Tool :
Demonstration
Smart Energy Tool – Modelling Sustainable Cooling Technologies
Day 5
Simulation Modelling with Smart Energy and Assessments
Case Study Detailing : Doing heat load calculations and modeling an output that demonstrates
sustainable building design incorporating sustainable cooling technologies and techniques
KEY RESPONSIBILITIES IN ENERGY FIELD
Energy engineers play a very important role in maintaining the energy efficiency of an organization. Their
major role in the organization is to generate new energy from renewable resources and provide clean and
efficient energy supply with minimal environmental damage. Apart from this, energy engineers are also
responsible for enhancing efficiency of existing energy resources by designing, developing, and improving
current and new energy generating procedures. The major process of energy generation includes extraction,
production, conversion, transmission, and distribution. Responsibilities of energy engineers also include
creating and extracting energy from a variety of sources such as bio-fuels, nuclear power, hydro power,
wind power, solar power, oil, gas, etc. Role of an energy engineer is quite multidimensional, and thus for
being successful in this field, it requires one to have an up-to-date technical knowledge on the latest
discoveries and inventions, industrial development trends, legislative and regulatory limitations, etc.,
needed for implementation of energy efficient systems.

Recommended

MANIKANDAN_ENERGY ENGINEER_Detailed Resume
MANIKANDAN_ENERGY ENGINEER_Detailed ResumeMANIKANDAN_ENERGY ENGINEER_Detailed Resume
MANIKANDAN_ENERGY ENGINEER_Detailed ResumeManikandan Sudalaimani
 
Garricks-Updated Resume-VA15
Garricks-Updated Resume-VA15Garricks-Updated Resume-VA15
Garricks-Updated Resume-VA15Garrick AUGUSTUS
 
ASHRAE Virtual Design and Construction Conference March 2021- Development of ...
ASHRAE Virtual Design and Construction Conference March 2021- Development of ...ASHRAE Virtual Design and Construction Conference March 2021- Development of ...
ASHRAE Virtual Design and Construction Conference March 2021- Development of ...Shanti Pless
 
Energy audit conditional grant
Energy audit conditional grantEnergy audit conditional grant
Energy audit conditional grantSteve Lojuntin
 
NASA Net Zero Roadmap: Federal Utilities Partnership Working Group, November ...
NASA Net Zero Roadmap: Federal Utilities Partnership Working Group, November ...NASA Net Zero Roadmap: Federal Utilities Partnership Working Group, November ...
NASA Net Zero Roadmap: Federal Utilities Partnership Working Group, November ...Shanti Pless
 
Energy Exchange 2015: Track 7 session 5: Energy Performance Based Design Buil...
Energy Exchange 2015: Track 7 session 5: Energy Performance Based Design Buil...Energy Exchange 2015: Track 7 session 5: Energy Performance Based Design Buil...
Energy Exchange 2015: Track 7 session 5: Energy Performance Based Design Buil...Shanti Pless
 

More Related Content

What's hot

Updated cv shailendra 11.05.16
Updated cv shailendra 11.05.16Updated cv shailendra 11.05.16
Updated cv shailendra 11.05.16shailendra kumar
 
Next Generation Net Zero Vision
Next Generation Net Zero VisionNext Generation Net Zero Vision
Next Generation Net Zero VisionShanti Pless
 
Industrial energy efficiency - approaches, technologies and policies, Girish ...
Industrial energy efficiency - approaches, technologies and policies, Girish ...Industrial energy efficiency - approaches, technologies and policies, Girish ...
Industrial energy efficiency - approaches, technologies and policies, Girish ...ESD UNU-IAS
 
RSF Net zero operations 2020
RSF Net zero operations 2020RSF Net zero operations 2020
RSF Net zero operations 2020Shanti Pless
 
Energy Efficiency in Permanent Modular Construction NREL Research Project Poster
Energy Efficiency in Permanent Modular Construction NREL Research Project PosterEnergy Efficiency in Permanent Modular Construction NREL Research Project Poster
Energy Efficiency in Permanent Modular Construction NREL Research Project PosterShanti Pless
 
Resume of operation specialist - Copy
Resume of operation specialist - CopyResume of operation specialist - Copy
Resume of operation specialist - CopyBirendra Barnwal
 
Integrating Energy Efficiency into the Emerging Off-site modular Construction...
Integrating Energy Efficiency into the Emerging Off-site modular Construction...Integrating Energy Efficiency into the Emerging Off-site modular Construction...
Integrating Energy Efficiency into the Emerging Off-site modular Construction...Shanti Pless
 
Innovative Capabilities to Integrate Energy Efficiency Strategies through Ad...
Innovative Capabilities to Integrate Energy Efficiency Strategies through  Ad...Innovative Capabilities to Integrate Energy Efficiency Strategies through  Ad...
Innovative Capabilities to Integrate Energy Efficiency Strategies through Ad...Shanti Pless
 
IRJET- Energy Saving and Performance Improvement Opportunities in Small Scale...
IRJET- Energy Saving and Performance Improvement Opportunities in Small Scale...IRJET- Energy Saving and Performance Improvement Opportunities in Small Scale...
IRJET- Energy Saving and Performance Improvement Opportunities in Small Scale...IRJET Journal
 
Saeidi-Abbas-Resume April 2015-updated
Saeidi-Abbas-Resume April 2015-updatedSaeidi-Abbas-Resume April 2015-updated
Saeidi-Abbas-Resume April 2015-updatedAbbas Saeidi
 
William _Satek_Manager_Resume_May_2016
William _Satek_Manager_Resume_May_2016William _Satek_Manager_Resume_May_2016
William _Satek_Manager_Resume_May_2016Bill Satek
 
9 Mantras to Save One Unit Per Day for Domestic Consumers
9 Mantras to Save One Unit Per Day for Domestic Consumers 9 Mantras to Save One Unit Per Day for Domestic Consumers
9 Mantras to Save One Unit Per Day for Domestic Consumers Murugananth Gopal Raj
 
Patrick Greer Senior Resume
Patrick Greer Senior ResumePatrick Greer Senior Resume
Patrick Greer Senior ResumePatrick Greer
 
Module 1 - Introduction to Energy Efficiency
Module 1 - Introduction to Energy EfficiencyModule 1 - Introduction to Energy Efficiency
Module 1 - Introduction to Energy EfficiencyPaul Brown
 

What's hot (20)

nazeemres
nazeemresnazeemres
nazeemres
 
Updated cv shailendra 11.05.16
Updated cv shailendra 11.05.16Updated cv shailendra 11.05.16
Updated cv shailendra 11.05.16
 
Next Generation Net Zero Vision
Next Generation Net Zero VisionNext Generation Net Zero Vision
Next Generation Net Zero Vision
 
Industrial energy efficiency - approaches, technologies and policies, Girish ...
Industrial energy efficiency - approaches, technologies and policies, Girish ...Industrial energy efficiency - approaches, technologies and policies, Girish ...
Industrial energy efficiency - approaches, technologies and policies, Girish ...
 
RSF Net zero operations 2020
RSF Net zero operations 2020RSF Net zero operations 2020
RSF Net zero operations 2020
 
Energy Efficiency in Permanent Modular Construction NREL Research Project Poster
Energy Efficiency in Permanent Modular Construction NREL Research Project PosterEnergy Efficiency in Permanent Modular Construction NREL Research Project Poster
Energy Efficiency in Permanent Modular Construction NREL Research Project Poster
 
Resume of operation specialist - Copy
Resume of operation specialist - CopyResume of operation specialist - Copy
Resume of operation specialist - Copy
 
Ashok Sai
Ashok SaiAshok Sai
Ashok Sai
 
Integrating Energy Efficiency into the Emerging Off-site modular Construction...
Integrating Energy Efficiency into the Emerging Off-site modular Construction...Integrating Energy Efficiency into the Emerging Off-site modular Construction...
Integrating Energy Efficiency into the Emerging Off-site modular Construction...
 
Innovative Capabilities to Integrate Energy Efficiency Strategies through Ad...
Innovative Capabilities to Integrate Energy Efficiency Strategies through  Ad...Innovative Capabilities to Integrate Energy Efficiency Strategies through  Ad...
Innovative Capabilities to Integrate Energy Efficiency Strategies through Ad...
 
IRJET- Energy Saving and Performance Improvement Opportunities in Small Scale...
IRJET- Energy Saving and Performance Improvement Opportunities in Small Scale...IRJET- Energy Saving and Performance Improvement Opportunities in Small Scale...
IRJET- Energy Saving and Performance Improvement Opportunities in Small Scale...
 
Saeidi-Abbas-Resume April 2015-updated
Saeidi-Abbas-Resume April 2015-updatedSaeidi-Abbas-Resume April 2015-updated
Saeidi-Abbas-Resume April 2015-updated
 
G K M Jafar_UAE
G K M Jafar_UAEG K M Jafar_UAE
G K M Jafar_UAE
 
William _Satek_Manager_Resume_May_2016
William _Satek_Manager_Resume_May_2016William _Satek_Manager_Resume_May_2016
William _Satek_Manager_Resume_May_2016
 
9 Mantras to Save One Unit Per Day for Domestic Consumers
9 Mantras to Save One Unit Per Day for Domestic Consumers 9 Mantras to Save One Unit Per Day for Domestic Consumers
9 Mantras to Save One Unit Per Day for Domestic Consumers
 
Resume - Anirvan
Resume - AnirvanResume - Anirvan
Resume - Anirvan
 
Barkley3102010
Barkley3102010Barkley3102010
Barkley3102010
 
Patrick Greer Senior Resume
Patrick Greer Senior ResumePatrick Greer Senior Resume
Patrick Greer Senior Resume
 
ANILCV R
ANILCV RANILCV R
ANILCV R
 
Module 1 - Introduction to Energy Efficiency
Module 1 - Introduction to Energy EfficiencyModule 1 - Introduction to Energy Efficiency
Module 1 - Introduction to Energy Efficiency
 

Similar to Manikandan Energy Engineer

Advanced Energy Design and Retrofit Guides Summary from the 2013 DOE BTO Peer...
Advanced Energy Design and Retrofit Guides Summary from the 2013 DOE BTO Peer...Advanced Energy Design and Retrofit Guides Summary from the 2013 DOE BTO Peer...
Advanced Energy Design and Retrofit Guides Summary from the 2013 DOE BTO Peer...Shanti Pless
 
GTC_Energy Services_Mexico City
GTC_Energy Services_Mexico CityGTC_Energy Services_Mexico City
GTC_Energy Services_Mexico CityDiana Nash
 
Overview: MN Guaranteed Energy Savings Program
Overview: MN Guaranteed Energy Savings ProgramOverview: MN Guaranteed Energy Savings Program
Overview: MN Guaranteed Energy Savings ProgramUniversity of Minnesota
 
American Institute of Architects Committee on the Envrinment
American Institute of Architects Committee on the EnvrinmentAmerican Institute of Architects Committee on the Envrinment
American Institute of Architects Committee on the EnvrinmentCenter for Energy and Environment
 
10. Jawahar CV latest on 10.06.2016
10. Jawahar CV latest on 10.06.201610. Jawahar CV latest on 10.06.2016
10. Jawahar CV latest on 10.06.2016M jawahar jawahar
 
Ir Muhammad Guntor Mansor Tobeng.pptx
Ir Muhammad Guntor Mansor Tobeng.pptxIr Muhammad Guntor Mansor Tobeng.pptx
Ir Muhammad Guntor Mansor Tobeng.pptxchan194576
 
NZC - Olgyay Scaling
NZC - Olgyay ScalingNZC - Olgyay Scaling
NZC - Olgyay ScalingWRONG PERSON
 
2: Introduction to Energy Audit Methods in Water Supply
2: Introduction to Energy Audit Methods in Water Supply2: Introduction to Energy Audit Methods in Water Supply
2: Introduction to Energy Audit Methods in Water SupplyAlliance To Save Energy
 
Energy Audit
Energy AuditEnergy Audit
Energy Auditmmmm
 
Resume - Sumit Jindal
Resume - Sumit JindalResume - Sumit Jindal
Resume - Sumit JindalSUMIT JINDAL
 

Similar to Manikandan Energy Engineer (20)

Revathi 1
Revathi 1Revathi 1
Revathi 1
 
Advanced Energy Design and Retrofit Guides Summary from the 2013 DOE BTO Peer...
Advanced Energy Design and Retrofit Guides Summary from the 2013 DOE BTO Peer...Advanced Energy Design and Retrofit Guides Summary from the 2013 DOE BTO Peer...
Advanced Energy Design and Retrofit Guides Summary from the 2013 DOE BTO Peer...
 
GTC_Energy Services_Mexico City
GTC_Energy Services_Mexico CityGTC_Energy Services_Mexico City
GTC_Energy Services_Mexico City
 
Overview: MN Guaranteed Energy Savings Program
Overview: MN Guaranteed Energy Savings ProgramOverview: MN Guaranteed Energy Savings Program
Overview: MN Guaranteed Energy Savings Program
 
DC Resume v2021
DC Resume v2021DC Resume v2021
DC Resume v2021
 
American Institute of Architects Committee on the Envrinment
American Institute of Architects Committee on the EnvrinmentAmerican Institute of Architects Committee on the Envrinment
American Institute of Architects Committee on the Envrinment
 
Eng. Osama Aly Ahmed - Energy Efficiency Management
Eng. Osama Aly Ahmed - Energy Efficiency ManagementEng. Osama Aly Ahmed - Energy Efficiency Management
Eng. Osama Aly Ahmed - Energy Efficiency Management
 
Project Review Presentation (2)
Project Review Presentation (2)Project Review Presentation (2)
Project Review Presentation (2)
 
10. Jawahar CV latest on 10.06.2016
10. Jawahar CV latest on 10.06.201610. Jawahar CV latest on 10.06.2016
10. Jawahar CV latest on 10.06.2016
 
Ir Muhammad Guntor Mansor Tobeng.pptx
Ir Muhammad Guntor Mansor Tobeng.pptxIr Muhammad Guntor Mansor Tobeng.pptx
Ir Muhammad Guntor Mansor Tobeng.pptx
 
NZC - Olgyay Scaling
NZC - Olgyay ScalingNZC - Olgyay Scaling
NZC - Olgyay Scaling
 
updated_Apr_2015
updated_Apr_2015updated_Apr_2015
updated_Apr_2015
 
updated_Apr_2015
updated_Apr_2015updated_Apr_2015
updated_Apr_2015
 
MhetreAM - Resume
MhetreAM - ResumeMhetreAM - Resume
MhetreAM - Resume
 
2: Introduction to Energy Audit Methods in Water Supply
2: Introduction to Energy Audit Methods in Water Supply2: Introduction to Energy Audit Methods in Water Supply
2: Introduction to Energy Audit Methods in Water Supply
 
Energy Audit
Energy AuditEnergy Audit
Energy Audit
 
Resume - Sumit Jindal
Resume - Sumit JindalResume - Sumit Jindal
Resume - Sumit Jindal
 
Vijai CV
Vijai CVVijai CV
Vijai CV
 
Resume
ResumeResume
Resume
 
kusum_1_gs
kusum_1_gskusum_1_gs
kusum_1_gs
 

Recently uploaded

【文凭定制】坎特伯雷大学毕业证学历认证
【文凭定制】坎特伯雷大学毕业证学历认证【文凭定制】坎特伯雷大学毕业证学历认证
【文凭定制】坎特伯雷大学毕业证学历认证muvgemo
 
streelmaking technology for the last 100 years.pdf
streelmaking technology for the last 100 years.pdfstreelmaking technology for the last 100 years.pdf
streelmaking technology for the last 100 years.pdfAlbertoConejoPadre1
 
Paper Machine Troubleshooting manual for paper makers
Paper Machine Troubleshooting manual for paper makersPaper Machine Troubleshooting manual for paper makers
Paper Machine Troubleshooting manual for paper makersNoman khan
 
Pointers and Array, pointer and String.pptx
Pointers and Array, pointer and String.pptxPointers and Array, pointer and String.pptx
Pointers and Array, pointer and String.pptxAnanthi Palanisamy
 
Basic Instrumentation Symbols | P&ID | PFD | Gaurav Singh Rajput
Basic Instrumentation Symbols | P&ID | PFD | Gaurav Singh RajputBasic Instrumentation Symbols | P&ID | PFD | Gaurav Singh Rajput
Basic Instrumentation Symbols | P&ID | PFD | Gaurav Singh RajputGaurav Singh Rajput
 
Introduction and replication to DragonflyDB
Introduction and replication to DragonflyDBIntroduction and replication to DragonflyDB
Introduction and replication to DragonflyDBMarian Marinov
 
Model Approved Food/ sanitary Grade Flow Meter
Model Approved Food/ sanitary Grade Flow MeterModel Approved Food/ sanitary Grade Flow Meter
Model Approved Food/ sanitary Grade Flow MeterManasMicrosystems
 
The Crystal London Arsitektur Hijau Dinda
The Crystal London Arsitektur Hijau DindaThe Crystal London Arsitektur Hijau Dinda
The Crystal London Arsitektur Hijau Dindadindapebriani27
 
Series of training sessions by our experts for you to provide necessary insig...
Series of training sessions by our experts for you to provide necessary insig...Series of training sessions by our experts for you to provide necessary insig...
Series of training sessions by our experts for you to provide necessary insig...AshishChanchal1
 
Basic Concepts of Material Science for Electrical and Electronic Materials ...
Basic Concepts of Material Science for  Electrical and Electronic Materials  ...Basic Concepts of Material Science for  Electrical and Electronic Materials  ...
Basic Concepts of Material Science for Electrical and Electronic Materials ...PeopleFinder
 
INTERACTIVE AQUATIC MUSEUM AT BAGH IBN QASIM CLIFTON KARACHI
INTERACTIVE AQUATIC MUSEUM AT BAGH IBN QASIM CLIFTON KARACHIINTERACTIVE AQUATIC MUSEUM AT BAGH IBN QASIM CLIFTON KARACHI
INTERACTIVE AQUATIC MUSEUM AT BAGH IBN QASIM CLIFTON KARACHIKiranKandhro1
 
Robust, Precise, Fast - Chose Two for Radiated EMC Measurements!
Robust, Precise, Fast - Chose Two for Radiated EMC Measurements!Robust, Precise, Fast - Chose Two for Radiated EMC Measurements!
Robust, Precise, Fast - Chose Two for Radiated EMC Measurements!Mathias Magdowski
 
Microservices: Benefits, drawbacks and are they for me?
Microservices: Benefits, drawbacks and are they for me?Microservices: Benefits, drawbacks and are they for me?
Microservices: Benefits, drawbacks and are they for me?Marian Marinov
 
Checklist to troubleshoot CD moisture profiles.docx
Checklist to troubleshoot CD moisture profiles.docxChecklist to troubleshoot CD moisture profiles.docx
Checklist to troubleshoot CD moisture profiles.docxNoman khan
 
Introduction to Machine Learning Unit-1 Notes for II-II Mechanical Engineerin...
Introduction to Machine Learning Unit-1 Notes for II-II Mechanical Engineerin...Introduction to Machine Learning Unit-1 Notes for II-II Mechanical Engineerin...
Introduction to Machine Learning Unit-1 Notes for II-II Mechanical Engineerin...C Sai Kiran
 
PM24_Oral_Presentation_Template_Guidelines.pptx
PM24_Oral_Presentation_Template_Guidelines.pptxPM24_Oral_Presentation_Template_Guidelines.pptx
PM24_Oral_Presentation_Template_Guidelines.pptxnissamant
 
fat and edible oil processsing.ppt, refining
fat and edible oil processsing.ppt, refiningfat and edible oil processsing.ppt, refining
fat and edible oil processsing.ppt, refiningteddymebratie
 
HB Self-Body characteristics UHV understanding
HB Self-Body characteristics UHV understandingHB Self-Body characteristics UHV understanding
HB Self-Body characteristics UHV understandingLeoRaju4
 

Recently uploaded (20)

【文凭定制】坎特伯雷大学毕业证学历认证
【文凭定制】坎特伯雷大学毕业证学历认证【文凭定制】坎特伯雷大学毕业证学历认证
【文凭定制】坎特伯雷大学毕业证学历认证
 
streelmaking technology for the last 100 years.pdf
streelmaking technology for the last 100 years.pdfstreelmaking technology for the last 100 years.pdf
streelmaking technology for the last 100 years.pdf
 
Paper Machine Troubleshooting manual for paper makers
Paper Machine Troubleshooting manual for paper makersPaper Machine Troubleshooting manual for paper makers
Paper Machine Troubleshooting manual for paper makers
 
Pointers and Array, pointer and String.pptx
Pointers and Array, pointer and String.pptxPointers and Array, pointer and String.pptx
Pointers and Array, pointer and String.pptx
 
AC DISTRIBUTION - ELECTRICAL POWER SYSTEM
AC DISTRIBUTION - ELECTRICAL POWER SYSTEMAC DISTRIBUTION - ELECTRICAL POWER SYSTEM
AC DISTRIBUTION - ELECTRICAL POWER SYSTEM
 
Basic Instrumentation Symbols | P&ID | PFD | Gaurav Singh Rajput
Basic Instrumentation Symbols | P&ID | PFD | Gaurav Singh RajputBasic Instrumentation Symbols | P&ID | PFD | Gaurav Singh Rajput
Basic Instrumentation Symbols | P&ID | PFD | Gaurav Singh Rajput
 
Introduction and replication to DragonflyDB
Introduction and replication to DragonflyDBIntroduction and replication to DragonflyDB
Introduction and replication to DragonflyDB
 
Model Approved Food/ sanitary Grade Flow Meter
Model Approved Food/ sanitary Grade Flow MeterModel Approved Food/ sanitary Grade Flow Meter
Model Approved Food/ sanitary Grade Flow Meter
 
The Crystal London Arsitektur Hijau Dinda
The Crystal London Arsitektur Hijau DindaThe Crystal London Arsitektur Hijau Dinda
The Crystal London Arsitektur Hijau Dinda
 
Series of training sessions by our experts for you to provide necessary insig...
Series of training sessions by our experts for you to provide necessary insig...Series of training sessions by our experts for you to provide necessary insig...
Series of training sessions by our experts for you to provide necessary insig...
 
Basic Concepts of Material Science for Electrical and Electronic Materials ...
Basic Concepts of Material Science for  Electrical and Electronic Materials  ...Basic Concepts of Material Science for  Electrical and Electronic Materials  ...
Basic Concepts of Material Science for Electrical and Electronic Materials ...
 
INTERACTIVE AQUATIC MUSEUM AT BAGH IBN QASIM CLIFTON KARACHI
INTERACTIVE AQUATIC MUSEUM AT BAGH IBN QASIM CLIFTON KARACHIINTERACTIVE AQUATIC MUSEUM AT BAGH IBN QASIM CLIFTON KARACHI
INTERACTIVE AQUATIC MUSEUM AT BAGH IBN QASIM CLIFTON KARACHI
 
Robust, Precise, Fast - Chose Two for Radiated EMC Measurements!
Robust, Precise, Fast - Chose Two for Radiated EMC Measurements!Robust, Precise, Fast - Chose Two for Radiated EMC Measurements!
Robust, Precise, Fast - Chose Two for Radiated EMC Measurements!
 
Microservices: Benefits, drawbacks and are they for me?
Microservices: Benefits, drawbacks and are they for me?Microservices: Benefits, drawbacks and are they for me?
Microservices: Benefits, drawbacks and are they for me?
 
Présentation IIRB 2024 Corentin Sochard - ÌTB
Présentation IIRB 2024 Corentin Sochard - ÌTBPrésentation IIRB 2024 Corentin Sochard - ÌTB
Présentation IIRB 2024 Corentin Sochard - ÌTB
 
Checklist to troubleshoot CD moisture profiles.docx
Checklist to troubleshoot CD moisture profiles.docxChecklist to troubleshoot CD moisture profiles.docx
Checklist to troubleshoot CD moisture profiles.docx
 
Introduction to Machine Learning Unit-1 Notes for II-II Mechanical Engineerin...
Introduction to Machine Learning Unit-1 Notes for II-II Mechanical Engineerin...Introduction to Machine Learning Unit-1 Notes for II-II Mechanical Engineerin...
Introduction to Machine Learning Unit-1 Notes for II-II Mechanical Engineerin...
 
PM24_Oral_Presentation_Template_Guidelines.pptx
PM24_Oral_Presentation_Template_Guidelines.pptxPM24_Oral_Presentation_Template_Guidelines.pptx
PM24_Oral_Presentation_Template_Guidelines.pptx
 
fat and edible oil processsing.ppt, refining
fat and edible oil processsing.ppt, refiningfat and edible oil processsing.ppt, refining
fat and edible oil processsing.ppt, refining
 
HB Self-Body characteristics UHV understanding
HB Self-Body characteristics UHV understandingHB Self-Body characteristics UHV understanding
HB Self-Body characteristics UHV understanding
 

Manikandan Energy Engineer

  • 1. MANIKANDAN .S Email id : manikandansudalaimani@gmail.com D/83, TNHB COLONY, ANBU NAGAR EXTENSION, Mobile : +91-9585666958 TIRUNELVELI – 627 011. OBJECTIVE To be a striving personality adapting to the needs of the company with great efficiency and be a part of a team that helps in achieving the organization’s success. ACADEMIC AND PROFESSIONAL DEVELOPMENT Course Board of Examination Institution Year Performance Class ME-ENERGY ANNA UNIVERSITY, CHENNAI CEG, ANNA UNIVERSITY MAIN CAMPUS, CHENNAI -25 2013-2015 7.8 (CGPA) FIRST CLASS BE-MECH ANNA UNIVERSITY, TIRUNELVELI Dr.Sivanthi Aditanar College of Engineering, Tiruchendur-215 2007-2011 76% FIRST CLASS HSC STATE BOARD, TAMIL NADU St. Xavier’s Hr. Sec. School, Palayamkottai-02 2007 68.42% FIRST CLASS SSLC STATE BOARD, TAMIL NADU St. Xavier’s Hr. Sec. School, Palayamkottai-02 2005 83.60% FIRST CLASS SEMESTER WISE MARKS SECURED (P.G. & U.G.) SEMESTER I II III IV V VI VII VIII P.G. – CGPA 8.22 7.62 7.4 8 - - - - U.G. – PERCENTAGE 71 74.11 70 73.4 70.8 77.5 80.13 90.29 SOFTWARES & AREAS OF INTEREST • Energy Software’s Proficiency : eQUEST, SMART ENERGY, ANSYS ( FLUENT - THERMAL) • Other Software’s Proficiency : PROE – (PROCABLING), AUTOCAD, MS OFFICE • Areas of Interest : GREEN BUILDING, HVAC, CRYOGENICS, ENERGY AUDIT P.G PROJECT Title : COMPARATIVE ENERGY ANALYSIS OF HVAC USING BICS & CONVENTIONAL COOLING Industry : GSH ( INDIA ) PRIVATE LIMITED – CHENNAI
  • 2. DESCRIPTION : Energy is one of the critical inputs for economic development of any country. Developing countries like India accounts for only 40 % of world’s total energy consumption, while constituting 80 % of world’s total population. The present study deals with an innovative approach that has been identified for energy conservation in HVAC systems by taking advantage of the surrounding environment. To examine this concept, experiment will be conduct on two uni – dimensional concrete roof structures one with Radiant cooling or Building Integrated Cooling System (BICS) and other with a conventional roof. A grid of copper pipes, in parallel arrangement, had been scientifically designed, fabricated and laid on one roof, while the other will left bare. Water will be circulated through these tubes. Parallel layout of tubes had been preferred for availing the advantage of better temperature difference between the pipe surface and cooling water. Building structure cooling helps to neutralize the solar heat load there by reducing the room temperature. A temperature reduction of about 30 % will be attaining by implementing the concept of BICS. This project details the design, thermodynamic aspects, energy conservation analysis and the economical benefits accrued by implementing the concept of BICS vis – a – vis conventional buildings. U.G PROJECT Title : CYCLE TIME REDUCTION IN 500MW BOILER DRUM MANUFACTURING USING CPM Industry : BHEL-TIRUCHY DESCRIPTION : In this competitive world the products should come to the market in a faster manner. For that the cycle time of the manufacturing processes should be reduced. Then only the productivity rate will be increased. Various manufacturing processes for a boiler drum are studied and the process chart was drawn. The critical path was determined by using Critical Path Method (CPM). We can reduce the total number of shifts and cycle time to complete the Boiler Drum Manufacturing by determining the appropriate Man-Days per shift. Feasibility studies are done, to determine the activity in which cycle time reduction is practical. The implementation of the suggested improvements in this project will lead to increased productivity, shorter lead times, reduced various cost & Increased profit.
  • 3. EXPERIENCE & INTERNSHIP DETAILS: Total 4.2 Years Exp., (including Internship) 1. Organization : Green Tree Buildings Energy Pvt., Ltd., Delhi Designation : Senior Energy Analyst Department : Building Energy Modeling and Simulation Period : July 2015 to Present – 5 Months Profile activities : • Support the bid team • Perform an initial review of the client requirements when an Invitation to Tender documents is received • Allocate the requirements to the required system and functions and manage these requirements throughout the engineering process • Work with Architect, Structural & Draftsmen in an integrated design approach • Vetting of MEP Design Basis Reports, Drawings and BOQ • HVAC, Thermal and Renewable Energy Calculations • Consolidation of Monthly Progress Report and Client meetings as and when required. • Check compliance of building with Local Building codes and Documentation as per Regulatory Authorities. • Code Compliance Energy Modelling (Appendix G – ASHRAE 90.1, LEED - USGBC, IGBC, ECBC, GRIHA) • Recommend energy conservation measures to improve energy performance of building. Main Categories of energy conservation measures fall under Building Envelope, HVAC and Lighting • Energy Simulation Study simulates the energy required in a building at the drawing board level of a building design using real time data and weather conditions of that particular place. This process also gives us the measure of the energy that will be consumed in that building as per various national and international standards. This helps us to set the bench mark level of energy consumption for a particular building. • Energy Simulation Study helps you to take informed decision in the design and construction of the buildings from an Energy Consumption point of view. Building Energy simulation tool which help us decide the right or optimum material and equipment specifications in a scientific and systematic manner. • Preparation of Energy Simulation Reports and Energy Credits documentations as per type of Certification standards. • Few Green Building Projects : a. Gardenia Eco City, Noida - IGBC b. JM Orchid- IGBC Gold Rated c. Rajiv Gupta Residence, Gurgaon - IGBC d. JM Aroma, Noida - IGBC e. Skytech Matrott – High-rise Residential Noida – IGBC Platinum Rated f. BSF 50 Bed Hospital Jodhpur GRIHA g. Elite Homes, NewDelhi - IGBC Gold Rated h. Mansion de Salam – Dhaka, Bangladesh USGBC
  • 4. 2. Organization : Alliance Tire Group, Tirunelveli Designation : Production Planning & Control Engineer Department : Production Planning & Control Period : June 2011 to August 2013 – 2.3 Years Profile activities : • Daily Morning Input Raw Materials Inventory have been taken in the Mixing Area, Extruder Area, Marangoni Area and output inventory have been taken in the Ware House then purchasing Raw material schedule is prepared depends on this inventory. • Daily PPS (3S/D) is prepared and issued to Mixing Area, Beading, 3 Roll Calender, 4 Roll Calender, Bias Cutter, Tire Building, Marangoni, Tire Curing and Maintenance Dept.,. • The Production Tonnage calculated for Tire Building and Tire Curing at the end of the shifts. • Tire Building Plant Capacity 110 Tonnage per day and Tire Curing Plant Capacity 120 Tonnage / day. • We achieved 6 times plant full capacity in Tire Building and Tire Curing, more times we crossed 100 Tonnage in Tire Building and Tire Curing during my working period. • Monthly once , industry statics in the 1st shift and Total Inventory have been taken then we make the inventory report within 4 days after that send the report to Head office Purchasing Dept. • During this period Monthly Maintenance work had been done. 3. Organization : GSH (India) Private Limited Designation : Intern Department : ENERGY Period : July 2014 to May 2015 – 11 Months Profile activities : • Identifying the area of high energy consuming sources and designing and developing energy efficient processes in such areas. • Introducing innovative energy efficient processes and implementing the same in the organization for high energy efficiency • Conducting on-site and field observations, collecting energy efficiency data, and analyzing the process of energy efficiency used • Evaluating energy efficiency by reviewing architectural, mechanical, and electrical plans of the organization, consulting the engineers for installation of energy efficient systems like climate control systems, day lighting design, etc., and preparing technical reports for implementation of energy efficient designing • Taking pivotal role in creating awareness about energy efficient systems installed and actively participating in encouraging the use of alternative energy resources • Conducting energy audits / research on alternative sources of energy, performing lab experiments, evaluating the results in terms of energy usage, conservation measure, cost effectiveness, etc., using mathematical and computer models for better implementation of energy management projects
  • 5. • Managing the construction, designing, and development of energy management projects as per the guidelines from the federal department and the budget requirement, performing energy modeling, verification, and commissioning as per the large-scale industrial process • Coordinating with the project management team for overall analysis of energy management system installation • Carrying out negotiations with fuel providers as per service agreements and managing costs and revenues while negotiating the tariff of new and existing supplies 4. Client : AXIS IT&T Software : PRO-E Wildfire 4.0 Designation : Intern – Design Engineer Department : Electrical Wiring Harness – Procabling Design Period : November 2010 to May 2011 – 7 Months Profile activities : • Circuit, Modeling ,Detailing , Harness drawing and Group drawing creation. • Detail drawing creation for Cabling components like Connectors, Terminals, etc. • Harness Design, Flattening , Harness drawing creation for CAT Trucks . • Group Modeling, Group drawings creation for CAT Trucks. • Schematic Diagram creation, 3D routing, Flattening, Wiring Harness Drawing ,Group drawing. • Error Report Generation, Wires, Circuits, Compare Diagrams, Automatic updates, etc. • Layer Control Methods, Datum plane, datum feature, datum targets, Process & Software based approach of 3D Harness as per CAT standards & Requirements. • Study of Catterpillar drawings, Views, Sections, Internal and External feature dimensions. GREEN BUILDING & HVAC DESIGN WORKSHOP – 1 WEEK Day 1 Climate Change, Ozone Depletion and Cooling Systems The Environmental Challenge – When cooling interiors means global warming Need for appropriate cooling systems & Alternative cooling strategies in the context of energy efficiency and climate change mitigation Building Energy Performance in India – Concepts & Examples Introduction to Integrative Design – ‘Performance by Design’ Thermal Comfort and Indoor Air Quality – Concepts, measurements and standards Passive Cooling systems and Techniques Day 2 Sustainable Cooling Technologies Active cooling – Efficient HVAC systems Natural Refrigerant based Air conditioning ( Unitary & Centralized Systems)
  • 6. Direct & Indirect Evaporative cooling Systems Radiant Cooling Techniques Solar Vapour Absorption Systems Site Visit – Olympia Tech Park, Guindy (IGBC Green Gold Rated Building) Day 3 Green Building Concepts, Materials, Performance and Economics Government Policies and regulations – ECBC, Voluntary Green rating systems and Star rating Systems for Buildings and equipment, Brief comparisons of various rating systems Integration of green building concepts in mainstream industry practices : Case Studies : Performance by Design, Rocky Mountain Institute – Complete Documentary Site Visit – Dakshin Chitra Architecture Museum ( To understand passive cooling techniques) Day 4 Learning by Doing – Practical Understanding of Energy modeling through software simulation Introduction to Energy Modelling : Theory of Heat load Simulation with Smart Energy Tool : Demonstration Smart Energy Tool – Modelling Sustainable Cooling Technologies Day 5 Simulation Modelling with Smart Energy and Assessments Case Study Detailing : Doing heat load calculations and modeling an output that demonstrates sustainable building design incorporating sustainable cooling technologies and techniques KEY RESPONSIBILITIES IN ENERGY FIELD Energy engineers play a very important role in maintaining the energy efficiency of an organization. Their major role in the organization is to generate new energy from renewable resources and provide clean and efficient energy supply with minimal environmental damage. Apart from this, energy engineers are also responsible for enhancing efficiency of existing energy resources by designing, developing, and improving current and new energy generating procedures. The major process of energy generation includes extraction, production, conversion, transmission, and distribution. Responsibilities of energy engineers also include creating and extracting energy from a variety of sources such as bio-fuels, nuclear power, hydro power, wind power, solar power, oil, gas, etc. Role of an energy engineer is quite multidimensional, and thus for being successful in this field, it requires one to have an up-to-date technical knowledge on the latest discoveries and inventions, industrial development trends, legislative and regulatory limitations, etc., needed for implementation of energy efficient systems.
  • 7. IN PLANT – TRAINING MARUTI SUZUKI service shop (12 days) & HYUNDAI SUSEE Automobiles Pvt. Ltd., (6 days). AAVIN-Nellai (11 days) & DCW Ltd., (6 days). Took part in the YSSP for 75 days [May 2003,May2004 and May 2005(15days)] organized by The Ministry of HRD, Govt. of India and the TNSCST, Govt. of Tamil Nadu. EXTRA CURRICULAR ACTIVITIES Won II Place in ‘Computer Drawing’ & ‘Herbal Event’,at St. Xavier’s Hr. Sec. School, INDIA. Won III Place in ‘Essay Writing’ in the year of 2004 & 2006 at St. Xavier’s Hr. Sec. School, INDIA. Won III Place in ‘Tamil Essay Writing’ at Scott Christian College, Tamil Nadu, INDIA. Participated ‘Fund Collecting of Resources Mobilisation for Leprosy Eradication’, INDIA. CO – CURRICULAR ACTIVITIES Published Journal in ‘16th ISME Conference’ on Mechanical Engineering at IIT – DELHI, INDIA. Won I Prize in ‘My Idea Programme’ conducted by Dr.SACOE ,VIT and IIT – MADRAS, Tamil Nadu. Won I Prize in ‘Paper Presentation’ at GCT-Coimbatore, Tamil Nadu, INDIA. Won I Prize in ‘Paper Presentation’ at SIT-Madurai, Tamil Nadu, INDIA. Won I Prize in ‘Paper Presentation’ at JAYA ENGG COLLEGE-Chennai, Tamil Nadu, INDIA. Participated ‘Workshop’ in IIT MADRAS,KARUNYA UNIVERSITY, Dr.SACOE, Tamil Nadu, INDIA. Participated more Technical Events (CAD Modeling, Car Sketching, Drafting ,Water Rocketry etc.,) in various Technical Universities and Engineering colleges. AWARDS AND ACHIEVEMENTS BEST YOUNG INNOVATOR 2011 in college (Dr.SACOE) selected by Villgro and participated in two days Young Innovator Programme at IIT MADRAS on 18th & 19th March 2011. BEST FINAL YEAR PROJECT certified by Tiruchy BHEL & my college (Dr.SACOE) selected that project entitled, “CYCLE TIME REDUCTION IN 500MW BOILER DRUM MANUFACTURING USING CPM” ,as BEST PROJECT in Mechanical Engineering Department for the academic year 2010-2011. BEST PAPER PRESENTER selected by MASS. 1st RANK in 8th SEMESTER in my college (Dr.SACOE) in the Anna University Examination. YOUNG STUDENT SCIENTIST in school (St.XHSS) selected by The Ministry of HRD, Govt. of India and the TNSCST, Govt. of Tamil Nadu & participated program at Scott Christian College during 2003-05. Completed JUNIOR GRADE IN ENGLISH Type Writing.
  • 8. PASSPORT DETAILS Passport Number : J 5656999 Place of Issue : Madurai Date of Issue : 04/02/2011 Date of Expiry : 03/02/2021 PERSONAL INFORMATION Name : Manikandan .S Father’s Name : Mr.A.Sudalaimani Date of Birth : 27-05-1990 Sex : Male Nationality : Indian Blood Group : B+ve Languages Known : Tamil, English, and Telugu Hobbies : Bike Driving, Bus Travelling, Listening to Songs, Drawing. Strength : Adaptive to New Environments Easily, Night Rider, Interest in Gaining Knowledge, Team Worker, Positive Attitude. REFERENCES Name : Dr. R. SETHUMADHAVAN Designation : Professor – Anna University, Department : IES, Mechanical Dept., College of Engineering Guindy, University : ANNA UNIVERSITY, CHENNAI Contact No : +91-94 44 45 46 25 DECLARATION I hereby certify that above furnished details are true to the best of my knowledge and belief. Place : Delhi – NCR [MANIKANDAN .S]