3. ARCHITECTURAL PLANNING AND
2D DRAFTING
Bungalow House
Produced in Autodesk Revit
AREAS: Living area, Dining Area, Kitchen, Powder Room, Toilet and Bath, and Two
Bedrooms.
4. ARCHITECTURAL PLANNING AND
2D DRAFTING
Two Storey Residential House
Produced in Autodesk AutoCad
AREAS: Living area, Dining Area, Kitchen, 3 Toilet and Bath, Masters’ Bedroom and Two
Bedrooms.
5. ARCHITECTURAL PLANNING AND
2D DRAFTING
A Transportation Hub for City
Produced in Autodesk Revit
AREAS: Concessionaires, Waiting Areas, Loading and Unloading Areas, Ticket Booths,
Public Toilets, Administration Offices.
6. ARCHITECTURAL PLANNING AND
2D DRAFTING
A Transportation Hub for City
Produced in Autodesk Revit
AREAS: Concessionaires, Waiting Areas, Loading and Unloading Areas, Ticket Booths,
Public Toilets, Administration Offices.
7. Transportation Hub
Produced in Autodesk Revit
A thesis proposal for subject Design 10. The proposed
Transportation hub for city of Bacoor, Cavite aims to
centralized the four (4) existing terminals to provide a more
controlled, organized and efficient system of transportation
in the municipality, promote convenience in commuting for
passengers, and to contribute to the reduction of traffic
congestion.
The Transportation Hub is divided in 2 terminals,
Terminal 1 and Terminal 2. Separating the trans-modal
and intermodal mode of transport in Bacoor City. The 1st
Terminal is offering trans-modal mode of transport with
fixed inbound and outbound of same vehicle transport,
this is applicable in PUBs or Public Utility Buses.
While 2nd
Terminal is offering a intermodal mode of
transport for the local vehicles that is existing in Bacoor
City. This is to support multiple connectivity or multimodal
of areas with high density, also known as gateway, in which
implies a shift from one mode to another.
EXTERIOR
MODELING & RENDERING
11. 3 Strorey House
Produced in Sketch Up
Rendered in Lumion 8
EXTERIOR
MODELING & RENDERING
Concessionaires
Produced in Sketch Up
Rendered in Lumion 10