Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Aventos

5,146 views

Published on

  • Be the first to comment

  • Be the first to like this

Aventos

  1. 1. AVENTOS – lift system BLUMOTION SERVO-DRIVE TIP-ON inside inside insideAVENTOS fittings for lift systems provide ease ■ Silent and effortless closing thanks to the ■ Optimised ergonomic handle positionof use in the wall cabinet area. Even wide lift integrated BLUMOTION ■ No protruding partssystems open easily, remain in any desired ■ Quick, easy assembly and removal due to ■ New: AVENTOS HK-S specifically for smallposition and – thanks to BLUMOTION – close CLIP technology stay liftssilently and effortlessly. ■ Easy, 3-dimensional front adjustment ■ New: SERVO-DRIVE, the electrical motion ■ Perfectly balanced – fronts remain in any support system for wall cabinets desired position ■ New: TIP-ON, the mechanical opening sup- port system for AVENTOS HK SERVO-DRIVE, the electrical mo- TIP-ON, our mechanical opening Specifically for smaller stay lifts:tion support system for bi-fold lift support system, is now also avail- AVENTOS HK-Ssystems, up and over lift systems, able for AVENTOS HKlift ups and stay lifts28 Catalogue 2011
  2. 2. AVENTOS AVENTOS – lift system OverviewAVENTOS HF – bi-fold lift system AVENTOS HF – bi-fold lift system 30 Assembly, removal and adjustment – SERVO-DRIVE Overview – AVENTOS HF 31 100 Wooden fronts and wide alu frames 32 Narrow alu frames 36 Accessories – hinge set 40 Accessories – opening angle stop 41Symbol photo Assembly, removal and adjustment 44AVENTOS HS – up and over lift system AVENTOS HS – up and over lift system 48 Assembly, removal and adjustment – SERVO-DRIVE Overview – AVENTOS HS 49 100 Wooden fronts, wide and narrow alu frames 50 Assembly, removal and adjustment 54Symbol photoAVENTOS HL – lift up AVENTOS HL – lift up 58 Assembly, removal and adjustment – SERVO-DRIVE Overview – AVENTOS HL 59 100 Wooden fronts, wide and narrow alu frames 60 Assembly, removal and adjustment 64Symbol photoAVENTOS HK – stay lift AVENTOS HK – stay lift 68 Assembly, removal and adjustment – SERVO-DRIVE Overview – AVENTOS HK 69 100 Wooden fronts, wide and narrow alu frames 70 Accessories – opening angle stop 74 Assembly, removal and adjustment 76Symbol photoAVENTOS HK-S – stay lift AVENTOS HK-S – stay lift 78 Overview – AVENTOS HK-S 79 Wooden fronts, wide and narrow alu frames 80 Accessories – opening angle stop 82 Assembly, removal and adjustment 84Symbol photoTIP-ON for AVENTOS HK – stay lift TIP-ON for AVENTOS HK – stay lift 86 Overview – TIP-ON for AVENTOS HK 87 Wooden fronts, wide and narrow alu frames 88 TIP-ON 90 Accessories – opening angle stop 92 Accessories – adapter plates 93Symbol photo Assembly, removal and adjustment 94 Accessories Screws 98 Centre bit 98 Door buffer 98 Screwdriver 99 Cross slot bit 99Symbol photo Catalogue 2011 29
  3. 3. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system A bi-fold lift system has never been so smooth The AVENTOS HF has a two-part front that folds together in the centre when open- ing. The bi-fold lift system is ideal for higher wall cabinets with large fronts because the handle remains easy to reach in any position. AVENTOS HF can also be used with fronts of different heights. ■ Silent and effortless closing, thanks to BLUMOTION ■ Easy to open ■ Stops at any opening position ■ Provides excellent access to the cabinet interior ■ Small programme, huge application variety ■ Easy assembly and adjustment ■ Stability, even with wide fronts ■ Excellent durability ■ Free positioning of handles ■ No protruding parts ■ New: SERVO-DRIVE for AVENTOS, the electrical motion support system for wall BLUMOTION SERVO-DRIVE cabinets inside inside Opening and closing – easy and comfortable Lift systems open effortlessly with AVENTOS HF. Even heavy fronts Thanks to the integrated BLUMOTION, both heavy and light fronts close only require light operating forces. The variable stop ensures that fronts silently and effortlessly always remain in the desired position Other advantages that will inspire both you and your customers Excellent durability No protruding parts Includes a finger safety feature Similar shelves possible The core element of the lift mecha- Removable telescopic arm – an The CLIP top centre hinge with in- Depending on the height of the nism is a robust spring package. advantage for furniture manufactur- novative technology ensures finger cabinet, 2 identical shelves can be The result: excellent durability ing and kitchen installation safety used 30 Catalogue 2011
  4. 4. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶ Overview ▶▶AVENTOS HF – bi-fold lift system Standard SERVO-DRIVE Wooden fronts and wide alu frames 32 Wooden fronts and wide alu frames 32 Narrow alu frames 36 Narrow alu frames 36Symbol photo Accessories Hinge-set 40 Screws 98 Opening angle stop 41 Centre bit 98 Mounting plates 234 Door buffer 98 Cover caps 240 Screwdriver 99 Cross slot bit 99Symbol photo Assembly, removal and adjustment Warning and safety information 44 Assembly, removal and adjustment – SERVO-DRIVE Assembly 44 100 Removal 47 Adjustment 45 Opening angle stop 47Symbol photo Info boxTake advantage of DYNALOG limited included free on the DVD.■ DYNAPLAN – cabinet planning incl. a collision check and fittings selection■ DYNACAT – electronic product catalogue and CAD data export (dxf, dwg, igs, sat, x_t, jpg)■ DYNASHOP – shopping basket and ordering function Pictograph Machine directive Item Available Upon Request Furniture with SERVO-DRIVE for AVENTOS is subject to the Machine Directive 2006/42/EC General Information and is valid for putting on the market within the European Economic Area (EEA) + Switzerland Accessories + Turkey. For more information, please go to www.blum. AVENTOS HF – bi-fold lift system com Wooden front Wide alu front Narrow alu front SERVO-DRIVE for AVENTOS INSERTA-boss EXPANDO-boss Screw-on boss Planning Assembly, removal and adjustment Catalogue 2011 31
  5. 5. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system Wooden fronts and wide alu frames - Ideal for wall cabinets with divided fronts Power factor LF = - Cabinet heights 480 - 1040 mm Cabinet height KH (mm) x combined weight of - Cabinet widths up to 1800 mm both fronts and handle (kg) - Silent and effortless closing, thanks to Theoret. cabinet height TKH = BLUMOTION Front height top FHo (mm) x 2 (incl. gaps) - Light operating forces - Variable stop We recommend the more powerful lift mecha- - Simple, tool-free assembly nism for overlapping areas. - 3-dimensional adjustment of both fronts * Use chipboard screws (609.1x00) for - Simple, infinitely variable lift mechanism wooden fronts. Use counter sunk self tap- - Centre hinge with finger safety feature ping screws (608.085) for wide alu frames Standard SERVO-DRIVE Order information 1 Lift mechanism set 5 Mounting plate for CLIP top 120°-hinge Power factor LF Part no. Standard mounting plates, distance depends on the top gap 2600 - 5500 (1 pc 960 - 2650) 20F2200.05 Recommendation 5350 - 10150 20F2500.05 Screw-on* Distance 0 mm 175H5400 9000 - 17250 (3 pc 13500 - 25900) 20F2800.05 Composed of: 6 SERVO-DRIVE set 1 Lift mechanism (symmetrical) 2x Nylon Chipboard screws Ø 4 x 35 mm 10 x RAL 7037 dust grey 21FA000 Composed of: 2 Telescopic arm set 6a Drive unit 1x Cabinet height KH ** 6b Distribution cable, 1500 mm 1x 480 - 570 mm 20F3200 6c Connecting node 1x 560 - 710 mm 20F3500 6d Cable end protector 2x 700 - 900 mm 20F3800 We recommend two synchronised drive units for a power factor > 17250. 760 - 1040 mm 20F3900 8 Transformer unit housing Composed of: white grey Z10NG120 2 Telescopic arm (symmetrical) 2x For Blum transformer 72 W ** Theoretical cabinet height TKH for asymmetrical fronts 3 Cover cap set Nylon light grey, silk white, nickel-lacquered 20F8000 Composed of: 3a Cover cap large left 1x 3b Cover cap large right 1x 3c Cover cap round 2x 3 Cover cap set for SERVO-DRIVE Nylon light grey, silk white, nickel-lacquered 21F8000 Composed of: 3a SERVO-DRIVE cover plate left 1x 3b Cover cap large right 1x 3c Cover cap round 2x 3d SERVO-DRIVE switch 2x 3e Blum distance bumper, Ø 5 mm 6x 4 Mounting plate for telescopic arm All horizontal mounting plates with 0 mm distance Recommendation Screw-on* Distance 0 mm 175H5400 EXPANDO Distance 0 mm 177H5400E Knock-in Distance 0 mm 177H5100 32 Catalogue 2011
  6. 6. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶Wooden fronts and wide alu framesOrder information7 Blum transformer 12 Mounting plate for CLIP top-centre hinge 72 W Standard mounting plates with 0 mm distance Including instruction leaflet and installation instructions Recommendation Screw-on* Distance 0 mm 175H5400 Language Part no. Note regarding wide alu frames below 57 mm frame width DE, EN, FR, IT, NL Z10NE020A Only use cruciform mounting plates DA, EN, FI, NO, SV Z10NE020B EN, EL, HR, SR, SL, TR Z10NE020C Distribution cable and cable end protector EN, FR, IT, ES, PT Z10NE020D Can be used as a distribution cable PL, SK, CS, HU Z10NE020E For cutting to size, 8 m Z10K800AE BG, ET, LV, LT, RO, RU Z10NE020F Composed of: EN (US, CA), FR, ES Z10NE020G 6b Distribution cable 1x ZH, EN Z10NE020H 6d Cable end protector 5xLanguage descriptions as per ISO-6399 Flex Connecting node and cable end protector Countries Europe Z10M200E CH Z10M200C black Z10V100E US, CA Z10M200U JP Z10M200J Composed of: BR Z10M200S BR Z10M200S.01 6c Connecting node 1x UK Z10M200B DK Z10M200D 6d Cable end protector 2x IL Z10M200I AU Z10M200K CN Z10M200N AR Z10M200A IN Z10M200H CL Z10M200L TW Z10M200T ZA Z10M200Z Europe, without plug Z10M200E.OS US, CA, without plug Z10M200U.OS10 CLIP top 120°-hinge INSERTA-boss Steel boss Unsprung 70T5590BTL Screw-on boss* Steel boss Unsprung 70T5550.TLNumber of hinges, see front assembly11 CLIP top-centre hinge EXPANDO-boss Zinc boss Unsprung 78Z553ET Screw-on boss* Zinc boss Unsprung 78Z5500TNumber of hinges, see front assembly Accessories Opening angle stop Cable holder Nylon deep grey Part no. white Z10K0009 104° 20F7051 For example, for securing the distribution cable 83° 20F7011Page instructionsOverview – AVENTOS HF 31 Warning and safety information 44Accessories – hinge set 40 Assembly, removal and adjustment 44Accessories – opening angle stop Assembly, removal and adjustment – SERVO- 41 DRIVE 100Accessories – mounting plates 234 Overview – assembly devices 705Accessories – general 98 Reference values for door weights 810 Info boxPlanning – symmetrical 34 More technical details 804 We recommend cabinet planning with the colli-Planning – asymmetrical 35 sion check feature using DYNAPLAN includedPlanning – Blum distance bumper 42 free on the enclosed DYNALOG limited DVD.Planning – SERVO-DRIVE switch 42 Catalogue 2011 33
  7. 7. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system Wooden fronts and wide alu frames Planning – symmetrical Drilling position Space requirement * Drilling depth 5 mm ** Alternative drilling 4 x chipboard screws Ø 4 x 35 mm KH Cabinet height Drilling for SERVO-DRIVE distribution cable, Opening angle stop Y left only Cabinet height KH H without FH x 0.44 + 38 mm 480 - 549 mm KH x 0.3 - 28 mm 104° FH x 0.24 + 34 mm 550 - 1040 mm KH x 0.3 - 57 mm 83° 0 mm Front assembly CLIP top 120°-hinge CLIP top-centre hinge KH 1/2 X 1/2 12.5 SFA SFA Front overlay of the side panel F Gap Min. gap F = 1.5 mm * 37 mm for cruciform mounting plates (37/32) Cabinet height KH X – Screws/ X – Knock-in Drilling distance TB Drilling distance TB EXPANDO 480 - 549 mm 68 mm 70 mm Front overlay FA Centre gap F 550 - 1040 mm 45 mm 47 mm 5 6 7 8 9 10 11 12 13 14 15 16 17 3 4 5 6 Number of Hinges 0 3 4 5 6 0 6 5 4 3 3 hinges starting at cabinet width 1200 mm and/ 3 3 4 5 6 3 or 12 kg front weight 6 3 4 5 6 6 4 hinges starting at cabinet width 1800 mm and/ 9 3 4 5 6 9 or 20 kg front weight Mounting plate Mounting plate Screw-on INSERTA/EXPANDO Page instructions Overview – AVENTOS HF 31 Order specification – wooden fronts and wide alu frames 32 Planning – Blum distance bumper 42 Planning – SERVO-DRIVE switch 42 Warning and safety information 44 Assembly, removal and adjustment 44 Assembly, removal and adjustment – SERVO- DRIVE 100 34 Catalogue 2011
  8. 8. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶Wooden fronts and wide alu frames Planning – asymmetricalDrilling position Space requirement* Drilling depth 5 mm** Alternative drilling4 x chipboard screws Ø 4 x 35 mm TKH = FHo (mm) x 2 (incl. gaps)Drilling for SERVO-DRIVE distribution cable, TKH Theoretical cabinet height Opening angle stop Yleft only KH Cabinet heightTheoret. cabinet height TKH H FHo Upper front height without FH x 0.44 + 38 mm480 - 549 mm TKH x 0.3 - 28 mm FHu Lower front height 104° FH x 0.24 + 34 mm550 - 1040 mm TKH x 0.3 - 57 mm 83° 0 mmFront assembly CLIP top 120°-hinge CLIP top-centre hingeFAu Bottom front overlay F Gap Min. gap F = 1.5 mmSFA Front overlay of the side panel * 37 mm for cruciform mounting plates (37/32)Theoret. cabinet X – Screws/ X – Knock-in Drilling distance TB Drilling distance TBheight TKH EXPANDO480 - 549 mm FHo / 2 + 68 mm FHo / 2 + 70 mm Front overlay FA Centre gap F550 - 1040 mm FHo / 2 + 45 mm FHo / 2 + 47 mm 5 6 7 8 9 10 11 12 13 14 15 16 17 3 4 5 6Number of Hinges 0 3 4 5 6 0 6 5 4 33 hinges starting at cabinet width 1200 mm and/ 3 3 4 5 6 3or 12 kg front weight 6 3 4 5 6 64 hinges starting at cabinet width 1800 mm and/ 9 3 4 5 6 9or 20 kg front weight Mounting plate Mounting plateScrew-on INSERTA/EXPANDO Page instructions Overview – AVENTOS HF 31 Order specification – wooden fronts and wide alu frames 32 Planning – Blum distance bumper 42 Planning – SERVO-DRIVE switch 42 Warning and safety information 44 Assembly, removal and adjustment 44 Assembly, removal and adjustment – SERVO- DRIVE 100 Catalogue 2011 35
  9. 9. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system Narrow alu frames - Ideal for wall cabinets with divided fronts Power factor LF = - Cabinet height 480 - 1040 mm Cabinet height KH (mm) x combined weight of - Cabinet width up to 1800 mm both fronts and handle (kg) - Silent and effortless closing, thanks to Theoret. cabinet height TKH = BLUMOTION Front height top FHo (mm) x 2 (incl. gaps) - Light operating forces - Variable stop We recommend the more powerful lift mecha- - Simple, tool-free assembly nism for overlapping areas. - 3-dimensional adjustment of both fronts - Simple, infinitely variable lift mechanism - Centre hinge with finger safety feature Standard SERVO-DRIVE Order information 1 Lift mechanism set 5 Mounting plate for CLIP top 120°-hinge Power factor LF Part no. Standard mounting plates, distance depends on the top gap 2600 - 5500 (1 pc 960 - 2650) 20F2200.05 Recommendation 5350 - 10150 20F2500.05 Screw-on Distance 0 mm 175H5400 9000 - 17250 (3 pc 13500 - 25900) 20F2800.05 Composed of: 6 SERVO-DRIVE set 1 Lift mechanism (symmetrical) 2x Nylon Chipboard screws Ø 4 x 35 mm 10 x RAL 7037 dust grey 21FA000 Composed of: 2 Telescopic arm set 6a Drive unit 1x Cabinet height KH ** 6b Distribution cable, 1500 mm 1x 480 - 570 mm 20F3200 6c Connecting node 1x 560 - 710 mm 20F3500 6d Cable end protector 2x 700 - 900 mm 20F3800 We recommend two synchronised drive units for a power factor > 17250. 760 - 1040 mm 20F3900 8 Transformer unit housing Composed of: white grey Z10NG120 2 Telescopic arm (symmetrical) 2x For Blum transformer 72 W ** Theoretical cabinet height TKH for asymmetrical fronts 3 Cover cap set Nylon light grey, silk white, nickel-lacquered 20F8000 Composed of: 3a Cover cap large left 1x 3b Cover cap large right 1x 3c Cover cap round 2x 3 Cover cap set for SERVO-DRIVE Nylon light grey, silk white, nickel-lacquered 21F8000 Composed of: 3a SERVO-DRIVE cover plate left 1x 3b Cover cap large right 1x 3c Cover cap round 2x 3d SERVO-DRIVE switch 2x 3e Blum distance bumper, Ø 5 mm 6x 4 CLIP adapter plate for telescopic arms Distance 0 mm 175H5B00 Left/right 36 Catalogue 2011
  10. 10. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶Narrow alu framesOrder information7 Blum transformer 12 CLIP adapter plate for centre hinges 72 W Distance 0 mm 175H5A00 Including instruction leaflet and installation instructions Symmetrical Language Part no. DE, EN, FR, IT, NL Z10NE020A DA, EN, FI, NO, SV Z10NE020B Distribution cable and cable end protector EN, EL, HR, SR, SL, TR Z10NE020C Can be used as a distribution cable EN, FR, IT, ES, PT Z10NE020D For cutting to size, 8 m Z10K800AE PL, SK, CS, HU Z10NE020E Composed of: BG, ET, LV, LT, RO, RU Z10NE020F 6b Distribution cable 1x EN (US, CA), FR, ES Z10NE020G 6d Cable end protector 5x ZH, EN Z10NE020HLanguage descriptions as per ISO-639 Connecting node and cable end protector9 Flex Countries black Z10V100E Europe Z10M200E CH Z10M200C Composed of: US, CA Z10M200U JP Z10M200J 6c Connecting node 1x BR Z10M200S BR Z10M200S.01 6d Cable end protector 2x UK Z10M200B DK Z10M200D IL Z10M200I AU Z10M200K CN Z10M200N AR Z10M200A IN Z10M200H CL Z10M200L TW Z10M200T ZA Z10M200Z Europe, without plug Z10M200E.OS US, CA, without plug Z10M200U.OS4 CLIP top 120°-aluminium frame door hinge Screw-on boss Zinc boss Unsprung 72T550A.TL Number of hinges, see front assembly11 CLIP top-aluminium centre hinge Screw-on boss Zinc boss Unsprung 78Z550AT Number of hinges, see front assembly Accessories Opening angle stop Cable holder Nylon deep grey Part no. white Z10K0009 104° 20F7051 For example, for securing the distribution cable 83° 20F7011Page instructionsOverview – AVENTOS HF 31 Warning and safety information 44Accessories – hinge set 40 Assembly, removal and adjustment 44Accessories – opening angle stop Assembly, removal and adjustment – SERVO- 41 DRIVE 100Accessories – mounting plates 234 Overview – assembly devices 705Accessories – general 98 Reference values for door weights 810 Info boxPlanning – symmetrical 38 More technical details 804 We recommend cabinet planning with the colli-Planning – asymmetrical 39 sion check feature using DYNAPLAN includedPlanning – Blum distance bumper 42 free on the enclosed DYNALOG limited DVD.Planning – SERVO-DRIVE switch 42 Catalogue 2011 37
  11. 11. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system Narrow alu frames Planning – symmetrical Drilling position Space requirement * Drilling depth 5 mm ** Alternative drilling 4 x chipboard screws Ø 4 x 35 mm KH Cabinet height Drilling for SERVO-DRIVE distribution cable, Opening angle stop Y left only Cabinet height KH H without FH x 0.44 + 38 mm 480 - 549 mm KH x 0.3 - 28 mm 104° FH x 0.24 + 34 mm 550 - 1040 mm KH x 0.3 - 57 mm 83° 0 mm Front assembly CLIP top 120°-aluminium frame door hinge CLIP top-aluminium centre hinge F = min. 1.5 mm Cabinet height KH X An adjustment has to be made for frame thick- 480 - 549 mm 54 mm nesses over 20.5 mm 550 - 1040 mm 31 mm Number of Hinges Screw-on (hinge/adapter plate) Page instructions 3 hinges starting at cabinet width 1200 mm and/ Overview – AVENTOS HF 31 or 12 kg front weight Order specification – narrow alu frames 4 hinges starting at cabinet width 1800 mm and/ 36 or 20 kg front weight Planning – Blum distance bumper 42 Planning – SERVO-DRIVE switch 42 Warning and safety information 44 Assembly, removal and adjustment 44 Assembly, removal and adjustment – SERVO- DRIVE 100 38 R4 6 1.4 * When changing material thickness, adjust the assembly dimensions accordingly 38 Catalogue 2011
  12. 12. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶Narrow alu frames Planning – asymmetricalDrilling position Space requirement* Drilling depth 5 mm** Alternative drilling4 x chipboard screws Ø 4 x 35 mm TKH = FHo (mm) x 2 (incl. gaps)Drilling for SERVO-DRIVE distribution cable, TKH Theoretical cabinet height Opening angle stop Yleft only KH Cabinet heightTheoret. cabinet height TKH H FHo Upper front height without FH x 0.44 + 38 mm480 - 549 mm TKH x 0.3 - 28 mm FHu Lower front height 104° FH x 0.24 + 34 mm550 - 1040 mm TKH x 0.3 - 57 mm 83° 0 mmFront assembly CLIP top 120°-aluminium frame door hinge CLIP top-aluminium centre hingeFAu Bottom front overlay F = min. 1.5 mmTheoret. cabinet height TKH X An adjustment has to be made for frame thick-480 - 549 mm FHo / 2 + 54 mm nesses over 20.5 mm550 - 1040 mm FHo / 2 + 31 mmNumber of Hinges Screw-on (hinge/adapter plate) Page instructions3 hinges starting at cabinet width 1200 mm and/ Overview – AVENTOS HF 31or 12 kg front weight Order specification – narrow alu frames4 hinges starting at cabinet width 1800 mm and/ 36or 20 kg front weight Planning – Blum distance bumper 42 Planning – SERVO-DRIVE switch 42 Warning and safety information 44 Assembly, removal and adjustment 44 Assembly, removal and adjustment – SERVO- DRIVE 100 38 R4 6 1.4 * When changing material thickness, adjust the assembly dimensions accordingly Catalogue 2011 39
  13. 13. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system ▶▶ Accessories – hinge set Wooden fronts Hinge-set Fixing Part no. INSERTA/knock-in/EXPANDO ☎ 78Z5530T10 Composed of: a CLIP top 120° hinge unsprung 2x 70T5590BTL b CLIP top centre hinge without spring 2x 78Z5530T c Horizontal cam mounting plate 6x 177H5100 d EXPANDO-cruciform mounting plate 2x 174E6100.01 Wooden fronts and wide alu frames Hinge-set Fixing Part no. Screw-on* ☎ 78Z5500T11 Composed of: a CLIP top 120° hinge unsprung 2x 70T5550.TL b CLIP top centre hinge without spring 2x 78Z5500T c Horizontal cam mounting plate 6x 175H5400 d Cruciform cam mounting plate 2x 173H7100 * Use chipboard screws (609.1x00) for wooden fronts. Use counter sunk self tapping screws (608.085) for wide alu frames Narrow alu frames Hinge-set Fixing Part no. Screw-on ☎ 78Z550AT11 Composed of: a CLIP top 120° aluminium frame hinge without spring 2x 72T550A.TL b CLIP top alu centre hinge without spring 2x 78Z550AT c Horizontal cam mounting plate 2x 175H5400 e CLIP adapter plate symmetric 2x 175H5A00 f CLIP-adapter plate left/right 2x 175H5B00 40 Catalogue 2011
  14. 14. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶ Accessories ▶▶Opening angle stop - Suitable for the AVENTOS HF bi–fold lift sys- Nylon Part no. tem 104° 20F7051 - Tool-free assembly and removal 83° 20F7011 - Additional 5th fixing screw (Ø 4 x 35 mm) required for the lift mechanism Page instructions Assembly 47 Catalogue 2011 41
  15. 15. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system ▶▶ Planning Blum distance bumper (SERVO-DRIVE application only) * From cabinet front edge for fronts that protrude below Insert Blum distance bumper (do not glue) Recommendation for aluminium frames: Consider drilling for the Blum distance bumper in the cabinet side. A trial application must be carried out when fixing to the front SERVO-DRIVE switch Page instructions Overview – AVENTOS HF 31 Order specification – wooden fronts and wide alu frames 32 Order specification – narrow alu frames 36 Assembly, removal and adjustment 44 Assembly, removal and adjustment – SERVO- DRIVE 100 Overview – assembly devices 705 More technical details 804 Info box We recommend cabinet planning with the colli- sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD. 42 Catalogue 2011
  16. 16. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶Catalogue 2011 43
  17. 17. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system ▶▶ Assembly, removal and adjustment Lift mechanism 1 2 Assembly Lift mechanism WARNING Telescopic arm could spring up and cause injury. Special warning and safety information must be added for North America Telescopic arm could spring up and Remove the telescopic arm rather cause injury than pushing it down Top front Assembly Bottom front Assembly 44 Catalogue 2011
  18. 18. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶ Assembly, removal and adjustment ▶▶Bottom front 1 2AssemblyBottom frontLift mechanismSettingLift mechanism Catalogue 2011 45
  19. 19. AVENTOS AVENTOS – lift system ▶ AVENTOS HF – bi-fold lift system ▶▶ Assembly, removal and adjustment Front 3 2 1 Top hinge Front 3 2 1 Centre hinge Front Telescopic arm Setting 46 Catalogue 2011
  20. 20. AVENTOS AVENTOS – lift system AVENTOS HF – bi-fold lift system ▶ Assembly, removal and adjustment ▶▶Removal 2 1Removal 1 2Removal WARNING Telescopic arm could spring up and cause injury.Special warning and safety information must beadded for North America Telescopic arm could spring up and Remove the telescopic arm rather cause injury than pushing it downOpening angle stop – 20F70x1Assembly Additional 5th chipboard screw Ø 4 x 35 mm Catalogue 2011 47
  21. 21. AVENTOS AVENTOS – lift system ▶ AVENTOS HS – up and over lift system Can an up & over lift system close more smoothly? With AVENTOS HS, the single front swings over the cabinet and is ideal for large-area, single fronts. The up and over lift system is also the perfect choice for cabinets with cornice or crown moulding. ■ Silent and effortless closing, thanks to BLUMOTION ■ Easy to open ■ Stops at any opening position ■ Provides excellent access to the cabinet interior ■ Suitable for wall cabinets with cornice or crown moulding ■ Small programme, huge application variety ■ Easy assembly and adjustment ■ Stability, even with wide fronts ■ Excellent durability ■ No protruding parts ■ New: SERVO-DRIVE for AVENTOS, the electrical motion support system for wall cabinets BLUMOTION SERVO-DRIVE inside inside Opening and closing – easy and comfortable AVENTOS HS provides ease of use that inspires. Even heavy fronts Thanks to the integrated BLUMOTION, both heavy and light fronts close are easy to open thanks to the light operating forces. The variable stop silently and effortlessly ensures that the front always remains in the desired position Other advantages that will inspire both you and your customers Excellent durability No protruding parts Cornice and crown moulding The core element of the lift mecha- Removable lever arm – an advan- You can easily combine cabinets with cornice or crown moulding with nism is a robust spring package. tage for furniture manufacturing and AVENTOS HS. This provides more design freedom for kitchen planning The result: excellent durability kitchen installation 48 Catalogue 2011
  22. 22. AVENTOS AVENTOS – lift system AVENTOS HS – up and over lift system ▶ Overview ▶▶AVENTOS HS – up and over lift system Standard SERVO-DRIVE Wooden fronts and wide alu frames 50 Wooden fronts and wide alu frames 50 Narrow alu frames 50 Narrow alu frames 50Symbol photo Accessories Screws 98 Centre bit 98 Door buffer 98 Screwdriver 99 Cross slot bit 99Symbol photo Assembly, removal and adjustment Warning and safety information 54 Assembly, removal and adjustment – SERVO-DRIVE Assembly 54 100 Adjustment 55 Removal 56Symbol photo Info boxTake advantage of DYNALOG limited included free on the DVD.■ DYNAPLAN – cabinet planning incl. a collision check and fittings selection■ DYNACAT – electronic product catalogue and CAD data export (dxf, dwg, igs, sat, x_t, jpg)■ DYNASHOP – shopping basket and ordering function Pictograph Machine directive Item Available Upon Request Furniture with SERVO-DRIVE for AVENTOS is subject to the Machine Directive 2006/42/EC General Information and is valid for putting on the market within the European Economic Area (EEA) + Switzerland Accessories + Turkey. For more information, please go to www.blum. AVENTOS HS – up and over lift system com Wooden front Wide alu front Narrow alu front SERVO-DRIVE for AVENTOS Planning Assembly, removal and adjustment Catalogue 2011 49
  23. 23. AVENTOS AVENTOS – lift system ▶ AVENTOS HS – up and over lift system Wooden fronts, wide and narrow alu frames - Ideal for large-area, single fronts In order to select the correct lift mechanism, it is - Cabinet height 350 - 800 mm necessary to establish both the cabinet height - Cabinet width up to 1800 mm and the weight of the front (including the handle) - Silent and effortless closing, thanks to Example BLUMOTION Cabinet height KH = 600 mm, weight of front = 10 kg, lift mechanism selection = 20S2E00.05 - Light operating forces when opening and clos- KH = 602 mm -> 600 mm, KH = 603 mm -> 605 mm ing We recommend the more powerful lift mecha- - Perfect ease of use with a variable stop nism for overlapping areas. - Simple, tool-free assembly * Use 4 chipboard screws (609.1x00) for - 3-dimensional adjustment of the front wooden fronts. Use 4 counter sunk self tap- - Simple, infinitely variable lift mechanism ping screws (608.085) for wide alu frames Standard SERVO-DRIVE Order information 1 Lift mechanism set 2 Lever arm set Cabinet height KH Part no. Steel 350 - 525 mm 20S2A00.05 20S2B00.05 20S2C00.05 nickel plated 20S3500.05 526 - 675 mm 20S2D00.05 20S2E00.05 20S2F00.05 Composed of: 676 - 800 mm 20S2G00.05 20S2H00.05 20S2I00.05 2a Lever arm left 1x Composed of: 2b Lever arm right 1x 1 Lift mechanism (symmetrical) 2x 2c Stabiliser adapter 2x Chipboard screws Ø 4 x 35 mm 10 x 2d Cross stabiliser cover cap 2x Weight of front incl. handle (kg) 2 Lever arm set for SERVO-DRIVE KH (mm) 20S2G00.05 20S2H00.05 20S2I00.05 KH (mm) 20S2D00.05 20S2E00.05 20S2F00.05 Steel 800 4.00–7.00 6.00–12.25 10.50–20.00 570 3.00–6.25 5.75–12.25 11.25–17.75 795 4.00–7.00 6.00–12.25 10.50–20.00 565 3.00–6.25 5.75–12.25 11.25–17.75 nickel plated 21S3500 790 4.00–7.00 6.00–12.25 10.75–20.00 560 3.00–6.50 6.00–12.25 11.25–17.50 785 4.00–7.00 6.25–12.50 10.75–20.00 555 3.00–6.50 6.00–12.50 11.50–17.50 Composed of: 780 4.00–7.00 6.25–12.50 10.75–20.25 550 3.00–6.50 6.00–12.50 11.50–17.25 2a SERVO-DRIVE lever arm left 1x 775 3.75–7.00 6.25–12.50 11.00–20.25 545 3.00–6.50 6.00–12.50 11.50–17.25 770 3.75–7.00 6.25–12.50 11.00–20.25 540 3.00–6.50 6.00–12.75 11.75–17.00 2b SERVO-DRIVE lever arm right 1x 765 3.75–7.25 6.50–12.50 11.00–20.25 535 3.00–6.75 6.25–12.75 11.75–16.75 2c Stabiliser adapter (steel) 2x 760 3.75–7.25 6.50–12.75 11.25–20.25 530 3.00–6.75 6.25–12.75 11.75–16.75 755 3.75–7.25 6.50–12.75 11.25–20.50 526 3.00–6.75 6.25–13.00 12.00–16.50 2d Cross stabiliser cover cap 2x 750 3.50–7.25 6.50–12.75 11.50–20.50 745 3.50–7.25 6.50–12.75 11.50–20.50 KH (mm) 20S2A00.05 20S2B00.05 20S2C00.05 740 3.50–7.25 6.50–12.75 11.75–20.75 525 2.50–4.00 3.25–7.50 7.25–15.00 3 Cover cap set 735 3.50–7.50 6.50–13.00 11.75–20.75 520 2.50–4.00 3.50–7.50 7.25–15.00 730 3.50–7.50 6.75–13.00 11.75–21.00 515 2.50–4.00 3.50–7.50 7.25–14.75 Nylon 725 3.50–7.50 6.75–13.00 12.00–21.00 510 2.50–4.00 3.50–7.75 7.50–14.75 light grey, silk white, nickel-lacquered 20S8000 720 3.50–7.50 6.75–13.00 12.00–21.25 505 2.50–4.00 3.50–7.75 7.50–14.75 715 3.50–7.50 6.75–13.00 12.00–21.25 500 2.50–4.25 3.50–7.75 7.50–14.75 Composed of: 710 3.50–7.75 6.75–13.25 12.25–21.25 495 2.50–4.25 3.75–7.75 7.50–14.50 705 3.50–7.75 6.75–13.25 12.25–21.50 490 2.50–4.25 3.75–8.00 7.75–14.50 3a Cover cap large left 1x 700 3.50–7.75 6.75–13.25 12.50–21.50 485 2.50–4.25 3.75–8.00 7.75–14.25 3b Cover cap large right 1x 695 3.50–7.75 6.75–13.25 12.50–21.50 480 2.50–4.25 3.75–8.00 7.75–14.25 690 3.50–7.75 6.75–13.25 12.75–21.50 475 2.50–4.25 3.75–8.00 7.75–14.00 3c Cover cap round 2x 685 3.50–8.00 7.00–13.25 12.75–21.50 470 2.50–4.25 4.00–8.25 8.00–14.00 680 3.50–8.00 7.00–13.50 13.00–21.50 465 2.25–4.25 4.00–8.25 8.00–13.75 676 3.50–8.00 7.00–13.50 13.00–21.50 460 2.25–4.25 4.00–8.25 8.00–13.75 455 2.25–4.25 4.00–8.50 8.25–13.50 KH (mm) 20S2D00.05 20S2E00.05 20S2F00.05 450 2.25–4.25 4.00–8.50 8.25–13.50 675 3.00–5.25 5.00–11.00 09.75–19.00 445 2.25–4.50 4.25–8.50 8.25–13.25 670 3.00–5.25 5.00–11.00 09.75–19.00 440 2.25–4.50 4.25–8.50 8.25–13.00 665 3.00–5.25 5.00–11.00 09.75–19.00 435 2.25–4.50 4.25–8.75 8.50–13.00 660 3.00–5.50 5.25–11.25 10.00–19.00 430 2.25–4.50 4.25–8.75 8.50–12.75 655 3.00–5.50 5.25–11.25 10.00–19.00 425 2.25–4.50 4.25–8.75 8.50–12.75 650 3.00–5.50 5.25–11.25 10.00–19.00 420 2.25–4.50 4.25–8.75 8.50–12.50 645 3.00–5.50 5.25–11.25 10.00–18.75 415 2.25–4.50 4.25–8.75 8.50–12.50 640 3.00–5.50 5.25–11.25 10.00–18.75 410 2.25–4.50 4.25–9.00 8.75–12.25 635 3.00–5.50 5.25–11.50 10.25–18.75 405 2.25–4.50 4.25–9.00 8.75–12.00 630 3.00–5.75 5.50–11.50 10.25–18.75 400 2.00–4.75 4.25–9.00 8.75–12.00 625 3.00–5.75 5.50–11.50 10.25–18.75 395 2.00–4.75 4.50–9.00 8.75–11.75 620 3.00–5.75 5.50–11.50 10.25–18.75 390 2.00–4.75 4.50–9.00 8.75–11.50 615 3.00–5.75 5.50–11.50 10.25–18.75 385 2.00–4.75 4.50–9.25 9.00–11.50 610 3.00–6.00 5.50–11.75 10.50–18.50 380 2.00–4.75 4.50–9.25 9.00–11.25 605 3.00–6.00 5.50–11.75 10.50–18.50 375 2.00–4.75 4.50–9.25 9.00–11.25 600 3.00–6.00 5.50–11.75 10.50–18.50 370 2.00–4.75 4.50–9.25 9.00–11.00 595 3.00–6.00 5.50–11.75 10.50–18.50 365 2.00–4.75 4.50–9.25 9.00–11.00 590 3.00–6.00 5.50–12.00 10.75–18.25 360 2.00–4.75 4.50–9.50 9.25–10.75 585 3.00–6.25 5.75–12.00 10.75–18.25 355 2.00–4.75 4.50–9.50 9.25–10.50 580 3.00–6.25 5.75–12.00 11.00–18.00 350 2.00–5.00 4.50–9.50 9.25–10.50 575 3.00–6.25 5.75–12.00 11.00–18.00 Cabinet height KH (mm) 50 Catalogue 2011
  24. 24. AVENTOS AVENTOS – lift system AVENTOS HS – up and over lift system ▶Wooden fronts, wide and narrow alu framesOrder information 3 Cover cap set for SERVO-DRIVE 7 Blum transformer Nylon 72 W light grey, silk white, nickel-lacquered 21S8000 Including instruction leaflet and installation instructions Composed of:3a SERVO-DRIVE cover plate left 1x Language Part no.3b Cover cap large right 1x DE, EN, FR, IT, NL Z10NE020A3c Cover cap round 2x DA, EN, FI, NO, SV Z10NE020B3d SERVO-DRIVE switch 2x EN, EL, HR, SR, SL, TR Z10NE020C3e Blum distance bumper, Ø 5 mm 4x EN, FR, IT, ES, PT Z10NE020D PL, SK, CS, HU Z10NE020E4 Front fixing bracket set BG, ET, LV, LT, RO, RU Z10NE020F Steel nickel plated EN (US, CA), FR, ES Z10NE020G Wooden fronts and wide alu frames* 20S4200 ZH, EN Z10NE020H Narrow alu frames 20S4200A Language descriptions as per ISO-639 8 Transformer unit housing5 Cross stabiliser rod round white grey Z10NG120 For cutting to size, 1061 mm For Blum transformer 72 W Aluminium Ø 16 mm 20Q1061U Cutting Internal cabinet width LW - 120 mm** 9 Flex** SERVO-DRIVE: inner cabinet width LW - 155 mm Countries Connecting piece set for cross stabiliser Europe Z10M200E CH Z10M200C Starting with cabinet width 1219 mm US, CA Z10M200U JP Z10M200J Aluminium Ø 16 mm 20Q091Z BR Z10M200S BR Z10M200S.01 Cutting for 5 Internal cabinet width LW / 2 - 139 mm UK Z10M200B DK Z10M200D IL Z10M200I AU Z10M200K Composed of: CN Z10M200N AR Z10M200A Connecting piece 1x IN Z10M200H CL Z10M200L Fixing 1x TW Z10M200T ZA Z10M200Z Stabiliser adapter 2x Europe, without plug Z10M200E.OS US, CA, without plug Z10M200U.OS Cross stabiliser cover cap 2x Distribution cable and cable end protector Connecting piece set for cross stabiliser Can be used as a distribution cable Starting with cabinet width 1219 mm For cutting to size, 8 m Z10K800AE Aluminium Ø 16 mm 21Q126Z Composed of: Cutting for 5 Internal cabinet width LW / 2 - 174 mm 6b Distribution cable 1x 6d Cable end protector 5x Composed of: see above Connecting node and cable end protector6 SERVO-DRIVE set Nylon black Z10V100E RAL 7037 dust grey 21FA000 Composed of: Composed of: 6c Connecting node 1x6a Drive unit 1x 6d Cable end protector 2x6b Distribution cable, 1500 mm 1x6c Connecting node 1x6d Cable end protector 2xWe recommend one SERVO-DRIVE drive unit per set for connected fronts! Accessories Cable holder white Z10K0009 For example, for securing the distribution cablePage instructionsOverview – AVENTOS HS 49 Assembly, removal and adjustment 54Accessories – general 98 Assembly, removal and adjustment – SERVO- Info boxPlanning 52 DRIVE 100 We recommend cabinet planning with the colli-Planning – Blum distance bumper 53 Overview – assembly devices 705 sion check feature using DYNAPLAN includedPlanning – SERVO-DRIVE switch 53 Reference values for door weights 810 free on the enclosed DYNALOG limited DVD.Warning and safety information 54 More technical details 804 Catalogue 2011 51
  25. 25. AVENTOS AVENTOS – lift system ▶ AVENTOS HS – up and over lift system Wooden fronts, wide and narrow alu frames Planning Drilling position Space requirement Cornice/crown moulding clearance * Drilling depth 5 mm ** Alternative drilling 180 135 Ø2 min 225 15 0 min 276 38 76 22 5 x chipboard screws Ø 4 x 35 mm Gap F (mm) X max. (mm) Y max. (mm) Drilling for SERVO-DRIVE distribution cable, 3.0 35 101 left only 2.0 31 101 SOB Cabinet top panel thickness 1.5 28 101 Front assembly – wooden fronts and wide Front assembly – narrow alu frames Planning – narrow alu frames alu frames Use 4 chipboard screws (609.1x00) for wooden FAo Upper front overlay * When changing material thickness, adjust the fronts. Use 4 counter sunk self tapping screws SFA Side front overlay assembly dimensions accordingly (608.085) for wide alu frames Wall application: min. gap required 5 mm For frame width 19 mm, a side front overlay SFA of 11 - 18 mm is possible Front setting Connecting piece Page instructions Overview – AVENTOS HS 49 Order specification – wooden fronts, wide and narrow alu frames 50 Warning and safety information 54 Assembly, removal and adjustment 54 Assembly, removal and adjustment – SERVO- DRIVE 100 Overview – assembly devices 705 More technical details 804 Dimensions depend on tilt adjustment 52 Catalogue 2011
  26. 26. AVENTOS AVENTOS – lift system AVENTOS HS – up and over lift system ▶Wooden fronts, wide and narrow alu frames PlanningBlum distance bumper (SERVO-DRIVE application only) * From cabinet front edge for fronts that protrude belowInsert Blum distance bumper (do not glue) Recommendation for aluminium frames: Consider drilling for the Blum distance bumper in the cabinet side. A trial application must be carried out when fixing to the frontSERVO-DRIVE switch Info box We recommend cabinet planning with the colli- sion check feature using DYNAPLAN included free on the enclosed DYNALOG limited DVD. Catalogue 2011 53

×