Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Contactor thermal relay catalogue

1,040 views

Published on

Contactor thermal relay catalogue

Published in: Technology
  • Be the first to comment

  • Be the first to like this

Contactor thermal relay catalogue

  1. 1. Standrad: IEC 61947-4-1 E Contactor & Thermal Relay Http://www.elcb.net TOC1 (1 & 2P) AC Contactor ......................................... TOC1 (3 & 4P) AC Contactor ........................................ TOC2 AC Contactor ..................................................... TOC2B AC Contactor ................................................... TOC2N AC Contactor ................................................... TOC3 AC Contactor ................................................... TOC2-F AC Contactor ................................................. TOC2I-N Mechanical Interlocking Contactor ........................ TOC2-K AC Contactor ................................................. TOC2-D DC Contactor ................................................. TOC2C Changeover Capacitor Contactor .................. TOC5 AC Contactor ................................................... TOC6 AC Contactor ................................................... TOC6I-N Mechanical Interlocking Contactor ..................... TOCA1 Auxiliary Contact Block ..................................... TOC7 AC Contactor ................................................... TOC8 AC Contactors .................................................. TOL1 Thermal Relay ................................................... TOL28 Thermal Relay ................................................... TOL3 Thermal Relay ................................................... TOL4 Thermal Relay ................................................... TOL5 Thermal Relay ................................................... TOQ1 Magnetic Starter ............................................... TOQ2 Star-delta Reduced Voltage Starter ..................... TOQ3 Star-delta Starter ............................................ TOQ4 CAM Starter ................................................... E/01-02 E/03-04 E/05-07 E/08 E/09 E/10-12 E/13-15 E/16-18 E/19 E/20-21 E/22 E/23-24 E/25-26 E/26 E/27 E/28 E/28 E/29-30 E/31-32 E/33-34 E/35-37 E/38-39 E/40 E/41 E/42 E/43 E
  2. 2. Standrad: IEC 60947-4-1 Partial Listing Of Available 1&2 Pole Contactors 1 Pole NO with or without shunt; 2 Pole NO; Silver Cadmium Oxide Contacts. 20-40FLA INITIAL DIELECRIC STRENGTH Between contacts & coils: 2,200 VAC Between poles: 2,200 VAC (includes shunt) Between open contacts: 2,200 VAC (no shunt) ARC COVER Optional on 20-30 FLA; Standard on 40 FLA INSULATION SYSTEM 130°C Class B TEMPERATURE EANGE -40°C to +65°C -40°F to +150°F UNIT WEIGHT 1Pole .5Ib 2Pole .6Ib POWER POLE TERMINATIONS # 10-32 screw or box lug WIRE SIZE # 10-32 screw 16-8* Box lug 14-4 * must use ring terminal RECOMMENDED TIGHTENING TORQUE # 10-32 screw 22 in.Ibs Box lug 40 in.Ibs QUICK CONNECTS Coil terminals dual: .250”QC Power terminals 1 Pole:Quad .250”QC 2 Pole:Dual or Quand.25”QC Fla Rating Number Of Poles 24V Coil 120V Coil 208/240V Coil 277V Coil 20 FLA 25 FLA 30 FLA 40 FLA 1 2 1 2 1 2 1 2 TOC1-1XQ00AA TOC1-2XQ00AA TOC1-1XQ01AA TOC1-2XQ01AA TOC1-1XQ02AA TOC1-2XQ02AA TOC1-1XQ04GG TOC1-2XQ04GG TOC1-1XT00AA TOC1-2XT00AA TOC1-1XT01AA TOC1-2XT01AA TOC1-1XT02AA TOC1-2XT02AA TOC1-1XT04GG TOC1-2XT04GG TOC1-1XU00AA TOC1-2XU00AA TOC1-1XU01AA TOC1-2XU01AA TOC1-1XU02AA TOC1-2XU02AA TOC1-1XU04GG TOC1-2XU04GG TOC1-1XV00AA TOC1-2XV00AA TOC1-1XV01AA TOC1-2XV01AA TOC1-1XV02AA TOC1-2XV02AA TOC1-1XV04GG TOC1-2XV04GG 24 18 18 6-15 31 28 6 5 30 Coil Rating 120 420 88 20-70 31 28 6 5 132 208/240 1800 177 40-140 31 28 6 5 264 277 2500 221 50-165 31 28 6 5 300 Nominal Coil Voltage Nominal Coil Resistance Ohms Maximum Pick Up Voltage Minimum Drop Out Voltage Nominal Inrush VA@50Hz Nominal Inrush VA@60Hz Nominal Sealed VA@50Hz Nominal Sealed VA@60Hz Maximum Coil Voltage 1 Pole Contactors 24 11 18 6-15 33 30 8 6.5 30 120 237 88 20-70 33 30 8 6.5 132 208/240 1000 177 40-140 33 30 8 6.5 264 277 1600 221 50-165 33 30 8 6.5 300 2 Pole Contactors 1P40A 1P30A 2P30A 2P40A TOC1 (1 & 2P) AC Contactor E-01
  3. 3. Standrad: IEC 61947-4-1 Electrical Rating Full Load Amps Resistive Amps @ 600VAC Locked Rotor Amps @240/277 VAC Locked Rotor Amps @480 VAC Locked Rotor Amps @600 VAC Maximum Horsepower 1 Pole Contactors 1 2 1 2 1 2 2 3 2 3 2 3 2 3 2 3 20 25 30 40 20 25 30 40 2 Pole Contactors 30 35 40 50 30 35 40 50 120 125 125 160 100 125 125 160 80 100 100 120 80 100 100 120 100 125 126 160 100 125 125 160 120 140 120 240 120 240 120 240 120 240 120 240 120 240 120 240 Voltage Single Phase 1 Pole Dimensions (Inches) 2 Pole Dimensions (Inches) TOC1(1 & 2P) AC Contactor AC Contactor E-02
  4. 4. Standrad: IEC 60947-4-1 Partial Listing Of Available 3&4 Pole Contactors 3 Pole NO; 4 Pole NO; Silver Cadmium Oxide Contacts. 20-40FLA INITIAL DIELECRIC STRENGTH Between contacts & coils: 2,200 VAC Between poles: 2,200 VAC Between open contacts: 2,200 VAC ARC COVER Standard INSULATION SYSTEM 130°C Class B TEMPERATURE EANGE -40°C to +65°C -40°F to +150°F UNIT WEIGHT 3Pole 1Ib 4Pole 1.25Ib POWER POLE TERMINATIONS # 10-32 screw or box lug WIRE SIZE # 10-32 screw 16-8* Box lug 14-4 * must use ring terminal RECOMMENDED TIGHTENING TORQUE # 10-32 screw 22 in.Ibs Box lug 40 in.Ibs QUICK CONNECTS Coil terminals Dual: .250” QC or #6-32 scew/.250”QC Power terminals Dual .250”QC Fla Rating Number Of Poles 24V Coil 120V Coil 208/240V Coil 277V Coil 20 FLA 25 FLA 30 FLA 40 FLA 3 3 3 4 3 4 TOC1-3XQ00CY TOC1-3XQ01CY TOC1-3XQ02CY TOC1-4XQ02CY TOC1-3XQ04CG TOC1-4XQ04CG TOC1-3XT00CY TOC1-3XT01CY TOC1-3XT02CY TOC1-4XT02CY TOC1-3XT04CG TOC1-4XT04CG TOC1-3XU00CY TOC1-3XU01CY TOC1-3XU02CY TOC1-4XU02CY TOC1-3XU04CG TOC1-4XU04CG TOC1-3XV00CY TOC1-3XV01CY TOC1-3XV02CY TOC1-4XV02CY TOC1-3XV04CG TOC1-4XV04CG 24 7 18 6-15 65 60 7.5 6 30 Coil Rating 120 180 88 20-70 65 60 7.5 6 132 208/240 720 177 40-140 65 60 7.5 6 264 277 900 220 50-185 65 60 7.5 6 300 Nominal Coil Voltage Nominal Coil Resistance Ohms Maximum Pick Up Voltage Minimum Drop Out Voltage Nominal Inrush VA@50Hz Nominal Inrush VA@60Hz Nominal Sealed VA@50Hz Nominal Sealed VA@60Hz Maximum Coil Voltage 3 Pole Contactors 24 6 18 6-15 62 59 9 7 30 120 150 88 20-70 62 59 9 7 132 208/240 600 177 40-140 62 59 9 6 264 277 750 220 65-185 62 59 9 7 300 4 Pole Contactors 4P40A 3P30A 3P40A 4P30A TOC1 (3 & 4P) AC Contactor E-03
  5. 5. Standrad: IEC 61947-4-1 3 Pole Dimensions (Inches) 4 Pole Dimensions (Inches) Resistive Amps @ 600VAC Locked Rotor Amps @240/277 VAC Locked Rotor Amps @480 VAC Locked Rotor Amps @600 VAC Maximum Horsepower Single Phase Three Phase Voltage 30 35 40 50 40 50 120 150 180 240 180 240 80 100 100 120 120 160 100 125 150 200 150 200 120 240/277 480/600 - 7.5 7.5 1.5 3 - 120 240/277 480 600 120 240/277 480 600 120 240/277 480 600 120 240/277 480/600 120 240/277 480/600 2 5 - - 2 5 - - 3 7.5 - - 2 5 - 3 7.5 - - 10 15 20 - 10 15 20 - 10 20 25 - 10 15 - 10 20 Electrical Rating Full Load Amps 3 Pole Contactors 20 25 30 40 30 40 4Pole Contactors TOC1(3 & 4P) AC Contactor AC Contactor E-04
  6. 6. Standrad: IEC 60947-4-1 Application TOC2-D50 TOC2-D25 TOC2-D09 TOC2-D95 TOC2 series AC Contactor is suitable for using in the circuits up to the rated voltage 660VAC 50/60Hz, rated current up to 620A, for making, breaking, frequently starting & controlling theAC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The product conforms to IEC60947-4-1 stardand. Specification Type TOC2- D09 9 3.5 2.2 4 4 5.5 5.5 20 100 20 1000 TOC2- D12 12 5 3 5.5 5.5 7.5 7.5 20 100 20 1000 TOC2- D18 18 7.7 4 7.5 9 10 10 32 100 20 1000 TOC2- D25 25 8.5 5.5 11 11 15 15 40 100 20 1000 TOC2- D32 32 12 7.5 15 15 18.5 18.5 50 80 20 800 TOC2- D40 40 18.5 11 18.5 22 22 30 60 80 15 800 TOC2- D50 50 24 15 22 25 30 33 80 60 15 800 TOC2- D65 65 28 18.5 30 37 37 37 80 60 15 800 TOC2- D80 80 37 22 37 45 55 45 125 60 10 600 TOC2- D95 95 44 25 45 45 55 55 125 60 10 600 Rated working current (A) AC3 AC4 220/230V 380/400V 415V 500V 660/690V AC3 (x104 ) AC4 (x104 ) Standard power ratings of 3-phase motors 50/ 60Hz in Rated heat current (A) Electrical life Mechanical life (x104 ) Number of the contacts 3P+NO 3P+NC 3P+NC+NO TOC2- D115 115 52 30 55 59 75 80 200 200 15 300 TOC2- D150 150 60 40 75 80 90 100 250 60 15 300 TOC2- D170 170 75 55 90 100 110 110 250 60 15 300 TOC2- D205 205 85 63 110 110 129 129 275 50 15 300 TOC2- D245 245 105 75 132 132 160 160 315 50 15 300 TOC2- D300 300 117 100 160 180 200 220 400 50 15 300 TOC2- D410 410 138 110 220 220 250 280 500 30 8 100 TOC2- D475 475 147 147 265 280 355 355 700 30 8 100 TOC2- D620 620 180 200 335 375 400 450 1000 20 5 100 Type Rated working current (A) AC3 AC4 220/230V 380/400V 415V 500V 660/690V AC3 (x104 ) AC4 (x104 ) Standard power ratings of 3-phase motors 50/60Hz in category AC-3(kW) Rated heat current (A) Electrical life Mechanical life (x104 ) TOC2 AC Contactor E-05
  7. 7. Standrad: IEC 61947-4-1 TOC2-D115 TOC2-D205 TOC2-D300 TOC2-D620 Outline and Mounting Dimension Type TOC2-D115 TOC2-D150 TOC2-D170 TOC2-D205 TOC2-D245 TOC2-D300 TOC2-D410 TOC2-D475 TOC2-D620 Ha – – – 120-106 120-106 120-106 120-106 180 180 A 158 158 158 168.5 168.5 213 213 233 309 S 17 17 17 20 25 25 25 30 40 B 120 120 120 174 197 206 206 238 304 C 132 132 132 181 181 219 219 232 255 b1 158 158 158 137 137 145 209 209 280 P 35 35 35 40 48 48 48 55 80 Q 60 60 60 69 69 91 91 108 140 L 75 75 75 113.5 113.5 145 145 146 155 Ø M6 M6 M6 M8 M10 M10 M10 M10 M12 Ga – – – 80 80 80 80 80 80 Q1 25 25 25 59.4 51.5 74 74 77 89 M 134 134 134 154 172 181 181 208 264 N 96.2 96.2 96.2 127 127 158 158 172 202 TOC2-D115~620 Type TOC2-D09~12 TOC2-D18 TOC2-D25 TOC2-D32 TOC2-D40~65 TOC2-D80~95 b 50/60 50/60 48 48 100/110 100/110 a 34/35 34/35 40 40 40 40 Ø 4.5 4.5 4.5 4.5 6.5 6.5 A 47 47 57 57 77 87 B 76 76 86 86 129 129 C 82 87 95 100 116 127 D 113 118 126 131 145 175 E 133 138 146 151 165 195 TOC2 AC Contactor AC Contactor E-06
  8. 8. Standrad: IEC 60947-4-1 Characteristic Relative productsContactor Auxiliary Blocks Time-delay contactor Reversing contactor Magnetic starter Changover capaciter contactor + + Delay timer Mechanical interlock Thermal relay Current-limited auxiliary block + + Star-delta starterDelay timer Auxiliary block + + TOC2 AC Contactor E-07
  9. 9. Standrad: IEC 61947-4-1 Application TOC2B series AC Contactor is suitable for using in the circuits up to the rated voltage 660VAC 50/ 60Hz, rated current up to 95A, for making, breaking, frequently starting & controlling theAC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The products comply with IEC60947-4. TOC2B-D32 TOC2B-D40 TOC2B-D95 TOC2B-D18 Rated working current (A) AC3 AC4 220/230V 380/400V 415V 500V 660/690V AC3 (x104 ) AC4 (x104 ) 3P+NO 3P+NC Standard power ratings of 3-phase motors 50/60Hz in category AC-3(kW) Electrical life Type Rated heat current (A) Mechanical life (x104 ) Number of the contacts TOC2B-09 9 3.5 2.2 4 4 5.5 5.5 20 100 20 1000 TOC2B-12 12 5 3 5.5 5.5 7.5 7.5 20 100 20 1000 TOC2B-18 18 7.7 4 7.5 9 10 10 32 100 20 1000 TOC2B-25 25 8.5 5.5 11 11 15 15 40 100 20 1000 TOC2B-32 32 12 7.5 15 15 18.5 18.5 50 80 20 800 3P+NC+NO Rated working current (A) AC3 AC4 220/230V 380/400V 415V 500V 660/690V AC3 (x104 ) AC4 (x104 ) Electrical life Type Rated heat current (A) Mechanical life (x104 ) Number of the contacts TOC2B-40 40 18.5 11 18.5 22 22 30 60 80 15 800 TOC2B-65 65 28 18.5 30 37 37 37 80 60 15 800 TOC2B-80 80 37 22 37 45 55 45 125 60 10 600 TOC2B-95 95 44 25 45 45 55 55 125 60 10 600 Standard power ratings of 3-phase motors 50/60Hz in category AC-3(kW) Specification Standard Control Circuit Voltage Volts 50Hz 60Hz 50/60Hz 440 R5 R6 R7 500 S5 – – 660 Y5 – – 24 B5 B6 B7 42 D5 D6 D7 48 E5 E6 E7 110 F5 F6 F7 220 M5 M6 M7 230 P5 – P7 240 U5 U6 U7 380 Q5 Q6 Q7 400 V5 – V7 415 N5 – N7 TOC2B AC Contactor AC Contactor E-08
  10. 10. Standrad: IEC 60947-4-1 Number of contacts 10: 3 N/O main contacts+1 N/O auxiliary contact (9A,12A,18A,25A,32A) 01: 3 N/O main contacts+1 N/C auxiliary contact (9A,12A,18A,25A,32A) 11: 3 N/O main contacts+1 N/O and 1N/C auxiliary contact (40A,50A,65A,80A,95A) 04: 4 N/O main contacts (9A,12A,25A,40A,50A,65A,80A,95A) 08: 2 N/O and 2N/C main contacts (9A,12A,25A,40A,50A,65A,80A,95A) Basic specification, expressed with the rated operational current (380V/400V, AC-3) Design sequence No. Contactor Company code ql===`===Ok==MV=NM General =Certificates: CE, KEMA, VDE, EK, ESC, UKrSEPRO, GOST, RCC, UL; =Electric ratings: AC50/60Hz, 690V, up to 95A; =Application: remote making & breaking circuits; protect circuit from over-load when assembling with thermal over-load relay; Frequent start-up and control of AC contactor; =Utilization category: AC-3, AC-4; =Altitude: 2000m; =Ambient temperature: -5°C~+40°C; =Mounting category:=III =Mounting conditions: inclination between the mounting plane and the vertical plane should not exceed ±5° =Standard: IEC/EN 60947-4-1 Type designation TOC2N AC Contactor E-09
  11. 11. Standrad: IEC 61947-4-1 Application TOC3 series AC contactor is suitable for frequency 50/60Hz,rated insulation voltage up to 1000V, rated operation current 9~150A under AC-3 duty.It is mainly used for making/breaking electric circuits at a long distance & for frequent starting/stopping & controlling AC Motors.It is used in combination with thermal relay to compose a magnetic motor starter. The products comply with IEC60947-4-1 standard. TOC3-50 TOC3-25 TOC3-09 Specification Close voltage:(0.85~1.1)Us Open voltage:(20%~75%)Us 9 25 690 690 2.2 4 4 5.5 5.5 1.5 2.2 2.2 3 4 1200 100 20 15 12 25 690 690 3 5.5 5.5 7.5 7.5 1.5 3.7 3 4 5.5 1200 100 20 18 32 690 690 4 7.5 9 10 10 2.2 4 3.7 5.5 7.5 1200 100 20 25 40 690 690 5.5 11 11 15 15 3 5.5 5.5 7.5 10 1200 100 20 32 50 690 690 7.5 15 15 18.5 18.5 4 7.5 7.5 9 11 1000 80 20 38 50 690 690 9 18.5 18.5 18.5 18.5 4 7.5 7.5 9 11 1000 80 20 40 60 1000 1000 11 18.5 22 22 30 4 9 9/11 11 15 1000 80 15 7 70 690 10 TOC3 -09 TOC3 -12 TOC3 -18 TOC3 -25 TOC3 -32 TOC3 -38 TOC3 -40 Frequency of operation (I/h) Electrical endurance (x104 ) Mechanical endurance (x106 ) Operating voltage range of coil Power consumption of coil (VA) Rated working current Ie (A) AC-3 Ue 440V Rated hear current Ith (A) Rated insulation voltage Ui (V) Rated operating voltage Ue (V) Max Type Rated operational power in AC-3 Pe (kW) Rated operational power in AC-4 Pe (kW) Rated insulation voltage of auxitiary contacts (V) 7 70 690 10 7 70 690 10 7 70 690 10 7 70 690 10 7 70 690 10 20 200 690 10 220/230V 380/400V 415/440V 500V 660/690V 220/230V 380/400V 415/440V 500V 660/690V AC-3 AC-4 Atracting Starting 690 10 Conventional thermal current of auxitiary contacts (A) AC-15:360VA DC-13:33WAuxitiary contacts speecification TOC3 AC Contactor AC Contactor E-10
  12. 12. Standrad: IEC 60947-4-1 TOC3-115 TOC3-150 TOC3-80 TOC3 -50 TOC3 -65 TOC3 -80 TOC3 -95 TOC3 -115 TOC3 -150 Type Close voltage:(0.85~1.1)Us Open voltage:(20%~75%)Us Frequency of operation (I/h) Electrical endurance (x104 ) Mechanical endurance (x106 ) Operating voltage range of coil Power consumption of coil Rated hear current Ith (A) Rated insulation voltage Ui (V) Rated operating voltage Ue (V) Max Rated operational power in AC-3 Pe (kW) Rated operational power in AC-4 Pe (kW) 22 300 690 10 Rated insulation voltage of auxitiary contacts (V) 220/230V 380/400V 415/440V 500V 660/690V 220/230V 380/400V 415/440V 500V 660/690V AC-3 AC-4 Atracting Starting 690 10 Rated working current Ie (A) AC-3 Ue 440V 50 80 1000 1000 15 22 25/30 30 33 5.5 11 11 15 18.5 1000 60 15 6 65 80 1000 1000 18.5 30 37 37 37 7.5 11 11/15 18.5 22 1000 60 15 6 80 125 1000 1000 22 37 45 55 45 7.5 15 15 22 25 750 60 10 4 95 125 1000 1000 25 45 45 55 45 9 15 15 22 25 750 60 10 150 200 1000 1000 40 75 80 90 100 11 22 22 37 45 750 60 15 115 200 1000 1000 30 55 59 75 80 9 18.5 18.5 30 30 750 60 15 20 200 690 10 20 200 690 10 20 200 690 10 20 200 690 10 22 300 690 10 Conventional thermal current auxitiary contacts (A) AC-15:360VA DC-13:33WAuxitiary contacts speecification Standard Control Circuit Voltage Volts 50Hz 60Hz 50/60Hz 24 B5 B6 B7 42 D5 D6 D7 48 E5 E6 E7 110 F5 F6 F7 220 E5 E6 E7 230 F5 F6 F7 240 U5 U6 U7 380 Q5 Q6 Q7 400 V5 - V7 415 N5 - N7 440 R5 R6 R7 500 S5 660 Y5 TOC3 AC Contactor E-11
  13. 13. Standrad: IEC 61947-4-1 Characteristic Contactor and other auxiliary blocks. Contactor Auxiliary Blocks Time-delay contactorDelay timer Magnetic starterThermal relay Relative Products + + + AC ContactorAuxliary block Outline and Mounting Dimension b c 09 76.6 87 12 76.6 87 18 76.6 87 25 76.6 94 32 76.6 94 38 76.6 94 40 127 116 50 127 116 65 127 116 80 127 123.8 95 127 123.8 115 158 132 150 158 132 TOC3 AC Contactor AC Contactor E-12
  14. 14. Standrad: IEC 60947-4-1 Application TOC2-F AC contactor is suitable for using in the circuits u to the rated voltage 380V AC 50/60Hz, current 800A, for long distance breaking circuit and frequently starting or controlling the motor. It also can be sed for the conntrol of distribution circuits of rated current from 115A to 800A. It conforms to IEC60947-4-1. TOC2-F115 TOC2-F150 TOC2-F630 TOC2-F780 Specification Type Rated opera- tional current in AC-3(A) 1000V Max power ratings of 3-phase motors in category AC-3(kW) 220V 230V 380V 400V 415V 440V 500V 660V 690V Me- chani- cal life x104 Electri- cal life AC-3 x104 Operating frequency (time/ hour) AC-3 TOC2-F1154 TOC2-F5004 TOC2-F115 TOC2-F1154 TOC2-F150 TOC2-F1504 TOC2-F185 TOC2-F1854 TOC2-F225 TOC2-F2254 TOC2-F265 TOC2-F2654 TOC2-F330 TOC2-F3304 TOC2-F400 TOC2-F4004 TOC2-F500 TOC2-F5004 TOC2-F630 TOC2-F6304 TOC2-F780 TOC2-F7804 TOC2-F800 115 115 150 150 185 185 225 225 265 265 330 330 400 400 500 500 630 630 780 780 800 65 65 65 65 100 100 100 100 147 147 160 160 185 185 335 335 450 450 40 450 450 30 30 40 40 55 55 63 63 75 75 100 100 110 110 147 147 200 200 220 220 250 55 55 75 75 90 90 110 110 132 132 160 160 200 200 250 250 335 335 400 400 450 59 59 80 80 100 100 110 110 140 140 180 180 220 220 280 280 375 375 425 425 450 59 59 80 80 100 100 110 110 140 140 200 200 250 250 295 295 400 400 425 425 450 75 75 90 90 110 110 130 130 160 160 200 200 257 257 355 355 400 400 450 450 450 80 80 100 100 110 110 129 129 160 160 220 220 280 280 335 335 450 450 475 475 470 1000 1000 1000 1000 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 120 120 120 120 100 100 100 100 80 80 80 80 80 80 80 80 80 80 80 80 80 1200 1200 1200 1200 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 TOC2-F AC Contactor E-13
  15. 15. Standrad: IEC 61947-4-1 Outline and Mounting Dimension TOC2-F AC Contactor AC Contactor E-14
  16. 16. Standrad: IEC 60947-4-1 Bobbin of AC Contactor TOC2-F Used for contactor TOC2-F115~F150 TOC2-F185~F225 TOC2-F265~F330 TOC2-F400 TOC2-F500 TOC2-F630 TOC2-F780 Type LX1-FF LX1-FG LX1-FH LX1-FJ LX1-FK LX1-FL LX1-FK(1) TOC2-F AC Contactor E-15
  17. 17. Standrad: IEC 61947-4-1 Specification Application TOC2I-N mechanical interlocking contactor is suitable for using in the circuits up to the rated voltage 660V AC 50/60Hz, current 620A, for convertible controlling the motor. This mechanical interlocking device en- sures contact changeover of the two convertible contactors. It conforms to IEC60947-4-1. TOC2I-09~12N TOC2I-25~32N TOC2I-40~95N TOC2I-115~800N Type Rated current AC-3(A) 9 12 18 25 32 40 50 63 80 95 115 150 170 205 245 300 410 475 620 Controlled power (kW) 220V 2.2 5.5 7.5 5.5 7.5 18.5 15 18.5 22 22 30 40 55 63 75 100 110 147 200 380V 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 220 265 335 415V 4 5.5 9 11 15 22 25 37 45 45 59 80 100 110 132 200 250 280 400 440V 4 5.5 9 11 15 22 30 37 45 45 59 80 100 110 132 200 250 280 400 660V 5.5 7.5 10 15 18.5 30 33 37 45 41 80 100 110 129 160 220 280 355 450 Type TOC2I-F115N TOC2I-F1154N TOC2I-F150N TOC2I-F1504N TOC2I-F185N TOC2I-F1854N TOC2I-F225N TOC2I-F2254N TOC2I-F265N TOC2I-F2654N TOC2I-F330N TOC2I-F3304N TOC2I-F400N TOC2I-F4004N TOC2I-F500N TOC2I-F5004N TOC2I-F630N TOC2I-F6304N TOC2I-F800N Number of poles 3P 4P 3P 4P 3P 4P 3P 4P 3P 4P 3P 4P 3P 4P 3P 4P 3P 4P 3P Rated current AC-3(A) 115 115 150 150 185 185 225 225 265 265 330 330 400 400 500 500 630 630 800 Controlled power(kW) 220V 380V 200 200 250 250 275 275 315 315 350 350 400 400 500 500 700 700 1000 1000 1000 55 55 75 75 90 90 110 110 132 132 160 160 200 200 250 250 335 335 400 Rated current In/A 250 250 355 355 425 425 500 500 630 630 800 800 800 800 1000 1000 1250 1250 1250 TOC2I-09N TOC2I-12N TOC2I-18N TOC2I-25N TOC2I-32N TOC2I-40N TOC2I-50N TOC2I-65N TOC2I-80N TOC2I-95N TOC2I-115N TOC2I-150N TOC2I-170N TOC2I-205N TOC2I-245N TOC2I-300N TOC2I-410N TOC2I-475N TOC2I-620N TOC2I-N Mechanical Interlocking Contactor AC Contactor E-16
  18. 18. Standrad: IEC 60947-4-1TOC2I-N Outline and Mounting Dimension c, e1 and e2 including cabing c, e1 and e2 including cabing c, e1 and e2 including cabing TOC2I 09N, 12N 18N 25N 32N, 38N a 105 106 127 127 b 74 74 84 84 c 84 92 99 117 e1(3P) 7 8 8 10 e2(4P) 6 - 7 - G 95 95 111 111 TOC2I-N(3-pole) 40N, 50N, 55N TOC2I-N(4-pole) 40N, 65N a 165 a 182 b 127 b 127 c 142 c 133 e1 5 e2 11 GG 50 GG 57 1 90 1 97 TOC2I-N(3-pole) 80N, 95N TOC2I-N(4-pole) 80N a 182 a 207 b 127 b 127 c 158 c 158 e1 13 e2 20 GG 57 GG 71 1 90 1 11 Mechanical Interlocking Contactor E-17
  19. 19. Standrad: IEC 61947-4-1 Type TOC2I-F115N TOC2I-F1154N TOC2I-F150N TOC2I-F1504N TOC2I-F185N TOC2I-F1854N TOC2I-F225N TOC2I-F2254N TOC2I-F265N TOC2I-F2654N TOC2I-F330N TOC2I-F3304N TOC2I-F400N TOC2I-F4004N TOC2I-F500N TOC2-I-F630N TOC2I-F6304N Amax 350 425 350 425 350 430 350 430 450 546 450 546 485 485 485 650 810 J 71 105 71 105 78 114 78 118 109 157 124 166 157 157 156 139 139 f 131 131 131 131 130 130 130 130 147 147 147 147 146 146 150 181 181 P1 77 77 71 71 71 71 55 54 96 100 112 107 110 107 115 140 137 b 330 370 330 370 330 370 330 370 428 485 428 485 460 485 460 625 785 ø 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 8.5 8.5 8.5 10.5 10.5 Cmax 182 182 182 182 193 193 193 193 225 225 232.5 232.5 232.5 232.5 245.5 268.5 268.5 Level intallment Stand intallment TOC2I-F115N,TOC2I-F150N TOC2I-F185N,TOC2I-F225N TOC2I-F265N TOC2I-F330N TOC2I-F400N TOC2I-F500N TOC2I-F630N H Min 200 220 250 260 280 300 380 H Max 310 310 380 380 380 380 380 H Min 80 100 130 60 100 120 200 H Max 190 190 260 200 200 200 200 Type TOC2I-N Mechanical Interlocking Contactor AC Contactor E-18
  20. 20. Standrad: IEC 60947-4-1 Application TOC2-K series AC contactor is suitable for use in the circuit up to the rate and frequent starting, control- ling the AC motor. The addition of auxiliary contact group to the contactor, combined with the proper thermal relay, can act to protect the circuit bound to overload. It conforms to IEC60947-4-1. TOC2-K06, 09, 12 TOC2-K06, 09, 12N Specification Type Rating working voltage(V) 380V AC-3 AC-4 TOC2-K06 6 2.6 16 60 72 48 60 1.5 2.2 3 TOC2-K09 660(690) 9 3.5 20 90 108 72 90 2.2 4 4 1200 300 5x106 1x105 3x106 TOC2-K12 12 5 20 120 144 96 120 3 5.5 4 Rating working current(A) Appointed heating current(A) 380V 660V 380V 660V 220v 380v 660v AC-3 AC-4 The max current when turn on(A) The max current for turn off(A) Three phases cage motors power which can be pulled AC3(kW) Operation frequency (time/hour) Electrical lfie AC-3 AC-4 Mechanical life Electricity lif(x104 ) Outline and Mounting Dimension TOC2-K AC Contactor E-19
  21. 21. Standrad: IEC 61947-4-1 Application TOC2-D series DC operated contactor is suitable for use in the circuits up to rated voltage 660V DC 50Hz or 60Hz, and in rated current 9-95A in DC-3/380V load circuits. For remote controlling circuit making, breaking and frequent starting DC motors. It can also combine with the auxiliary contact group, air delayer, thermal relay devices etc. Specification TOC2-40~95D TOC2-09~32D Working voltage DC % DC % Close Open TOC2-09D 9 3.5 6.6 1.5 25 2.2 4 4 5.5 5.5 0.64 76x115x47 3, 4 380, 660 660 1000 100 20 1200 300 3600 24-660 0.85~1.1Us 0.10~0.75Us Type Rated working current(A) AC3 AC4 AC3 AC4 TOC2-12D 12 5 8.9 2 25 3 5.5 5.5 7.5 7.5 0.34 76x115x47 3, 4 380, 660 660 1000 100 20 1200 300 3600 24-660 0.85~1.1Us 0.10~0.75Us TOC2-18D 18 7.7 12 3.8 32 4 7.5 9 10 10 0.65 76x120x47 3 380, 660 660 1000 100 20 1200 300 3600 24-660 0.85~1.1Us 0.10~0.75Us TOC2-25D 25 8.5 18 4.4 40 5.5 11 11 15 15 0.65 88x130x59 3, 4 380, 660 660 1000 100 20 1200 300 3600 24-660 0.85~1.1Us 0.10~0.75Us TOC2-32D 32 12 21 7.5 50 7.5 15 15 18.5 18.5 0.95 86x135x59 3 380, 660 660 800 80 20 600 300 3600 24-660 0.85~1.1Us 0.10~0.75Us Rated heat current(A) 220/240V 380/400V 415V 500V 600/690V DC contactor DC contactor Controllable power(kW) Weight(Kg) Measure(Mm3 ) Pole Rated working voltage(V) Rated insulation voltage(V) Mechanical life x104 Electrical life AC x104 AC4 x104 AC3 x104 AC4 x104 Electrical life Operating frequency Mechanical life x104 Rated controlled voltage(V) 380V 660V Type TOC2-40D 40 18.5 34 9 60 11 18.5 22 22 30 2.185 128x175x81 3, 4 380, 660 660 800 80 15 600 300 3600 24-660 0.85~1.1Us 0.10~0.75Us Rated working current(A) AC3 AC4 AC3 AC4 TOC2-50D 50 24 39 12 80 15 22 30 30 33 2.185 128x175x87 3, 4 380, 660 660 800 80 15 600 300 3600 24-660 0.85~1.1Us 0.10~0.75Us TOC2-65D 65 28 42 14 80 18.5 30 37 37 37 2.185 128x175x87 3, 4 380, 660 660 800 80 15 600 300 3600 24-660 0.85~1.1Us 0.10~0.75Us TOC2-80D 80 37 49 17.3 125 22 37 45 55 45 2.525 128x183x87 3, 4 380, 660 660 600 60 10 600 300 3600 24-660 0.85~1.1Us 0.10~0.75Us TOC2-95D 95 44 55 21.3 125 25 45 45 55 55 2.525 128x183x8 3, 4 380, 660 660 600 60 10 600 300 3600 24-660 0.85~1.1Us 0.10~0.75Us Rated heat current(A) 220/240V 380/400V 415V 500V 600/690V DC contactor DC contactor Controllable power(kW) Weight(Kg) Measure(Mm3 ) Pole Rated working voltage(V) Rated insulation voltage(V) Mechanical life x104 Electrical life AC x104 AC4 x104 AC3 x104 AC4 x104 Electri- cal life Operating frequency Mechanical life x104 Rated controlled voltage(V) 380V 660V Working voltage DC % DC % Close Open TOC2-D DC Contactor AC Contactor E-20
  22. 22. Standrad: IEC 60947-4-1 Outline and Mounting Dimension TOC2-09~12D TOC2-18D TOC2-25D TOC2-32D TOC2-4011~6511D TOC2-4004/4008D ~6504/6508D TOC2-8011~9511D TOC2-09~12D TOC2-8004/8008D ~9504/9508D Amax 47 47 57 57 77 84 87 96 Bmax 76 76 86 86 129 129 129 129 Cmax 82(116) 87(122) 95(131) 100(138) 116(173) 116(173) 127(188) 127(183) Dmax 120.5(154.5) 125.5(160.5) 133.5(169.5) 138.5(176.5) 154.5(211.5) 154.5(211.5) 165.5(226.5) 160.5(221.5) Emax 140.5(174.5) 145.5(180.5) 153.5(189.5) 158.5(196.5) 174.5(231.5) 174.5(231.5) 185.5(246.5) 180.5(241.5) a 34/35 34/35 40 40 40 40 40 40 b 50/60 50/60 48 48 100/110 100/110 100/110 100/110 ø 4.5 4.5 4.5 4.5 6.5 6.5 6.5 6.5 L 60(95) 61(96) 70(107) 71.6(120) 78(135) 78(135) 83(140) 83(140) P 105 11.3 13.2 14.5 20 20 23.5 23.5 S 8.6 10.4 11.7 13 8.6 8.6 12 12 TOC2-D DC Contactor E-21
  23. 23. Standrad: IEC 61947-4-1 TOC2C-25~32 TOC2C-63~95 Application TOC2C series changeover capacitor contactor is mainly applicable to a power line of AC 50/ 60Hz, rated working voltage up to 380V. It is used to put a low voltage parallel connected capacitor in operation or switch it off in a low voltage reactive power compensation device. The contactor is equipped with a surge suppressor, which can effectively reduce the surge current passing through the capacitor at weitching on and suppress the over-voltage at switching off.The product is in conformity with the standards IEC947-4-1. Specification TOC2C-43 100 29 10 20 500 380 20le Pick-up:(85%~110%); Drop-out:(20%~75%) Us 110 11 AC-15 360VA; DC-13 33W 0.64 TOC2C-25 100 17 6 12 70 8 0.44 Electrical lfie Rating current le (380V)A Rated insulation voltage Ui(V) Rated operational voltage Ue(V) Restrained surge capacity Operation range Control capacity of auxiliary contact Weight(Kg) 220/230V 380/400V Start-up Holding TOC2C-32 100 23 9 18 110 11 0.63 TOC2C-63 100 43 15 30 200 20 1.4 TOC2C-95 100 63 22 40 200 20 1.5 Model Power of controlled capacitor Coil power(VA) Outline and Mounting Dimension Type TOC2C-25 TOC2C-32 TOC2C-43 TOC2C-63 TOC2C-95 Amax 80 90 90 132 135 Bmax 47 58 58 79 87 Cmax 124 134 136 150 158 Dmax 76 86 86 E 34/35 40 40 F 50/60 48 48 Note Screw mount/ 35mm rail mount TOC2C Changeover Capacitor Contactor AC Contactor E-22
  24. 24. Standrad: IEC 60947-4-1 TOC5-22~32TOC5-9~18 TOC5-40~65 TOC5-75~85 TOC5-100/125 TOC5-150 TOC5-180 TOC5-220 Application TOC5 series AC contactor is suitable for using in the circuits up to the rated voltage 660V AC 50/60Hz, rated current up to 85A, for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. It conforms to IEC60947-1 standard. Specification TOC5-9 20A 2.5kW11A 4kW9A 4kW7A 4kW5A 20A 0.5HP 1HP 2HP 3HP 2HP 5HP Type 200~240V 380~440V 500~550V 690V 115V 230V 200V 230V 460V 575V Continuous current(Ith) AC1 duty TOC5-12 20A 3.5kW13A 5.5kW12A 7.5kW12A 7.5kW9A 25A 0.5HP 2HP 3HP 3HP 7.5HP 10HP TOC5-18 25A 4.5kW18A 7.5kW18A 7.5kW13A 7.5kW9A 30A 1HP 3HP 5HP 5HP 10HP 15HP TOC5-22 32A 5.5kW22A 11kW22A 15kW22A 15kW18A 32A 2HP 3HP 7HP 7.5HP 10HP 15HP TOC5-32 50A 7.5kW32A 15kW32A 18.5kW28A 18.5kW21A 45A 2HP 5HP 7.5HP 10HP 20HP 20HP AC3 duty Single phase Three phase AC motor TOC5-40 60A 11kW40A 18.5kW40A 22kW32A 22kW25A 50A 3HP 5HP 10HP 10HP 25HP 25HP TOC5-50 80A 15kW55A 22kW50A 30kW43A 30kW33A 70A 3HP 7.5HP 10HP 15HP 30HP 30HP TOC5-65 100A 18.5kW65A 30kW65A 37kW60A 37kW47A 80A 5HP 10HP 15HP 20HP 40HP 40HP TOC5-75 110A 22kW75A 37kW75A 45kW64A 45kW47A 90A 5HP 15HP 20HP 25HP 50HP 50HP TOC5-85 135A 25kW85A 45kW85A 45kW75A 45kW52A 100A 7.5HP 15HP 25HP 30HP 50HP 50HP Type 200~240V 380~440V 500~550V 690V 115V 230V 200V 230V 460V 575V Continuous current(Ith) Single phase AC3 duty AC1 duty Three phase AC motor TOC5 AC Contactor E-23
  25. 25. Standrad: IEC 61947-4-1 Outline and Mounting Dimension TOC5-9~22 TOC5-32~40 TOC5-50~85 Auxiliary for AC Contactor TOC5 AU-2-20 AU-2-11 AU-2-02 Type Contact No. NO NC 2 1 0 0 1 2 PIC AU-4-40 AU-4-31 AU-4-22 AU-4-13 AU-4-04 4 3 2 1 0 0 1 2 3 4 TOC5 AC Contactor AC Contactor E-24
  26. 26. Standrad: IEC 60947-4-1 Application TOC6 series AC contactors are suitable for frequency 50/60Hz,rated insulation voltage up to 1000V, rated operation current 9~475A under AC-3 duty.It is mainly used for making/breaking electric circuit at a long distance & for frequent starting/stopping & with thermal relay to compose a magnetic motor starter.The product conforms to IEC60947-4-1 stardand. TOC6-9~12 TOC6-16~22 TOC6-32 TOC6-45~85 Specification 10 69 690 10 6/10 0.45 Type AC-3 AC-4 380V 660V 380V 660V AC3 AC4 AC3 AC4 Mechanical endurance(x106 ) Conventional thermal current(A) Rated insulation voltage(V) TOC6-9 TOC6-12 TOC6-16 TOC6-22 TOC6-32 TOC6-45 TOC6-63 TOC6-75 TOC6-85 TOC6-110 TOC6-140 TOC6-170 TOC6-205 TOC6-250 TOC6-300 TOC6-400 TOC6-475 10 20 660 9/12 3.3/4.3 4/5.5 5.5/7.5 1.4/1.9 2.4/3.3 1000 250 1.2 0.2 10 30 660 16/22 7.7/8.5 7.5/11 11 3.5/4 6/6.6 750 250 1.2 0.2 10 45 660 32 15.6 15 23 7.5 13 750 250 1.2 0.2 8 80 1000 45/63 24/28 22/30 39/55 12/14 20.8/24 1200/1000 400/300 1.2 0.2 8 100 1000 75/85 34/42 37/45 67 17/21 29.5/36 1000/850 300/250 1.2 0.2 8 160 1000 110/140 54/68 55/75 100 27/35 46.9/60 1000/750 300/200 1.2 0.2 8 210 1000 170/205 75/96 90/110 156 38/50 66/86 700/500 200/130 1.2 0.2 8 300 1000 250/300 110/125 132/160 235 58/66 100/114 700/500 200/130 1.2 0.2 8 400/550 1000 400/475 150 200/250 375 81 140 500/420 150 1.2 0.2 Operating voltage range of coil Rated insulation voltage of auxitiary contacts(V) Power consump- tion of coil Conventional thermal current of auxitiary contacts(A) Rated operating current of auxitiary contacts(A) Atracting (VA) Starting (VA) AC15 380/220 DC13 220V (0.8~1.1)Ue Rated(380V) operating current(A) 10 68 690 10 6/10 0.45 12.1 101 690 10 4/6 0.48 17 183 690 10 4/6 0.48 32 330 690 10 4/6 0.48 39 550 690 10 4/6 0.48 58 910 690 10 4/6 0.48 84 1430 690 10 4/6 0.48 115 2450 690 10 4/6 0.48 Rated voltage of the control coil(V) 24,36,48,110,127,220,380,etc 24,110,220,440,etc. 50Hz 60Hz Power of controllable motor(kW) AC-3 Frequency of operation (l/h) Electrical endurance (x106 ) Power of controllable motor(kW) AC-4 AC Contactors TOC6 E-25
  27. 27. Standrad: IEC 61947-4-1 Outline and Mounting Dimension TOC6-0.9~32 (Table 1) TOC6-45~475(Table 2) Table 1 Type TOC6-9,12 TOC6-16,22 TOC6-32 A max 45 46 74 B max 78.5 85 88 C max 104(90) 114 108 a 35+0.31 35+0.31 50+0.31 b 60+0.37 75+0.37 75+0.37 Type TOC6-45,63 TOC6-75,85 TOC6-110,140 TOC6-170,205 TOC6-250,300 TOC6-400,475 Table 2 A max 91(114) 102(125) 122(145) 140(163) 150(173) 165(188) B max 120 135 156 185 205 205 C max 124 142 154 190 200 225 a 70+0.6 80+0.6 100+0.2 100+0.2 120+0.2 130+0.8 b 100+0.2 100+0.2 130+0.8 160+0.8 180+0.8 180+0.8 ø 4.8 5.5 6.5 7 9 9 TOC6I-45~400N TOC6I-09~32N TOC6-170~475 TOC6-110~140 TOC6I-N Mechanical Interlocking Contactor Specification Type TOC6I-09N TOC6I-12N TOC6I-16N TOC6I-22N TOC6I-32N TOC6I-45N TOC6I-63N TOC6I-75N TOC6I-85N TOC6I-110N TOC6I-140N TOC6I-170N TOC6I-205N TOC6I-250N TOC6I-300N TOC6I-400N Rated thermal current (A) 20 20 30 30 45 45 70 70 90 90 150 150 180 220 300 300 Rated operation current (A) Controllable power of motor (kW) 380V 660V 380V 660V 380V AC 3 AC 4 9 12 16 22 32 38 45 63 75 85 110 140 170 205 250 300 3.3 4.3 7.7 8.5 15.6 18.5 24 28 34 42 54 68 75 96 110 125 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 5.5 7.5 11 11 23 23 39 55 67 67 100 100 156 156 235 235 1.4 1.9 3.5 4 7.5 9 12 14 17 21 27 35 38 50 58 66 660V 2.4 3.3 6 6.6 13 15.5 20.8 24.3 29.5 36 46.9 60 66 86 100 114 TOC6 AC Contactors AC Contactor E-26
  28. 28. Standrad: IEC 60947-4-1 TOCA1-DN11 TOCA2-DT2 TOCA8-DN11 TOCA1-DN22 TOCA1 Auxiliary Contact Block E-27 1 1 1 1 1 1 - 1 1 - 1 0 2 1 2 0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 - 1 1 - 2 2 2 2 2 2 2 2 2 2 TOCA2-DT0 TOCA2-DT2 TOCA2-DT4 0.1...3S 0.1...30S 10...180S TOCA2 Time Delay Auxiliary Contact Block Type TOCA1-DN10C TOCA1-DN01C Auxiliary instantaneous contactor block,contactor I Appellation Type TOCA1-DN11C TOCA1-DN20C TOCA1-DN02C Auxiliary instantaneous contactor block,contactor II Appellation Type TOCA1-DN40C TOCA1-DN31C TOCA1-DN22C TOCA1-DN13C TOCA1-DN04C Auxiliary instantaneous contactor block,contactor IV Appellation Type TOCA1-DN40C TOCA1-DN31C TOCA1-DN22C TOCA1-DN13C TOCA1-DN04C Auxiliary instantaneous contactor block,contactor IV Appellation Type TOCA8-DN11C TOCA8-DN20C Side-mounted auxiliary module Appellation TOCA2-DT0 TOCA2-DT2 TOCA2-DT4 TOCA2-DS2 Type 0.1...3S 0.1...30S 10...180S 1...30S Auxiliary instantaneous contactor block,contactor IV Appellation Type Time delay auxiliary contactor block releasing and delay Appellation
  29. 29. Standrad: IEC 61947-4-1 Application Modular contactors are essential for control and automation duties in dwellings,offices,shop and hospitals,They are particularly suitable for switching lighting installations,heat pumps,night storage heating,airconditioned plant and for other devices in building automation. Technical data TOC7 TOC8 4P 25A =Standard control voltage(Ue):20 230V/50 60Hz =Thermal continuous current(lth):24,40,63A =Current ratings for AC1:24,40,63A =Pole number:4(either as main or auxiliary contacts) =Back up fuse g1 max ratings:35,63,80A =Mechanical endurance:10 million cycles =Electrical endurance:1 million cycles =Ambient temperature:-25 H55 =Connection capacity:tunnel terminal for cables up to 25mm =Width in 17.5mm modules: 24A35mm(2 modules),40A52.5mm(3 modules),63A52.5mm(3 modules) Features =Standardized design =Silent operating by virtue of DC solenoid system =Switching condition indication =Single protection to VDE 0106 Part 100 TOC8 1P 20A TOC8 2P 40A TOC8 AC Contactors Application The product is mainly applicable to a power system of AC 50Hz(or 60Hz),rated working voltage up to 230V,and in a line of application class AC-7A with rated working voltage up to 230V and rated working current up to 20A.It is used to remotely make and break the line.The product is widely used in dwelling houses,hotels and so on. Specification 500(AC-1,AC-7a,AC-7b) 230(AC-1,AC-7a,AC-7b) 20(AC-1,AC-7a,AC-7b) 20(AC-1,AC-7a),9(AC-7b) 4AC-1,AC-7a),1.2(AC-7b) PñNM Q NñNM R 85%-110%US 20%-75%US TOC8-20 Rated insulation voltage(V) Rated working voltage(V) Conventional heating current(A) Rated working current(A) Control power(KW) Electric lifetime(times) Mechanical lifetime(times) Type Action range Pick-up voltage Release voltage Application class code Marking/breaking condition AC-1,AC-7a AC-7b Sustain time(s) Time interval(s) Operation cycle(times)COSØ 0.8 0.45 Ur/Ue 1.05 1.05 lc/le 1.5 8 0.05 0.05 10 10 50 50 Application class code Marking/breaking condition AC-1 AC-7a AC-7b Sustain time(s) Time interval(s) Operation cycle(times) 0.05 0.05 0.05 10 10 10 6000 30000 30000 lc/le 1.0 1.0 6.0 Ur/Ue 1.05 1.05 1.0 COSØ 0.8 0.8 0.45 lc/le 1.0 1.0 6.0 Ur/Ue 1.05 1.05 1.0 COSØ 0.8 0.8 0.45 TOC7 AC Contactors AC Contactor E-28
  30. 30. Standrad: IEC 60947-4-1 Application TOL1 series thermal relay is suitable for using in the circuits rated voltage up to 660V, rated current 80A, AC 50/60Hz, for over-current protection of AC motor. The relay has the differential mechanism and temperature compensation and can plug in TOC2 series AC contactor. The product conforms to IEC60947-4-1 stardand. TOL1-09-25 TOL1-40-80 Motion Characteristic: Three-phase Balance Motion Time No Start condition Ambient temperature Times of the setting current (A) Motion time 1 2 3 4 10A 10 Cold state Heat state (Following the No.1 test) Cold state 20±5°C 2s<Tp 10s 4s<Tp 10s 63A >63A 1.05 1.2 1.5 7.2 >2h <2h <4min Phase-losing Motion Characteristic No 1 2 Times of the setting current(A) 1.0 1.15 Any two phases Another phase 0.9 0 Ambient temperature 20±5°C Motion time >2h <2h Cold state Start condition Heat state (Following the No.1 test) Specification TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-09~25 TOC2-40, 50, 63 TOC2-40, 50, 63 TOC2-40, 50, 63 TOC2-40, 50, 63 TOC2-40, 50, 63 Number Setting range (A) 0.1~0.16 0.16~0.25 0.25~0.4 0.4~0.63 0.63~1 1~1.6 1.6~2.5 2.5~4 4~6 5.5~8 7~10 10~13 13~18 18~25 23~32 30~40 38~50 48~57 57~66 63~80 Type For contactor TOL1 09301 09302 09303 09304 09305 09306 09307 09308 09310 09312 09314 12316 16321 25322 40353 40355 63357 63359 63361 80363 TOL1 Thermal Relay E-29
  31. 31. Standrad: IEC 61947-4-1 Outline and Mounting Dimension TOL1-09-25 F type TOL1-09-25 Z type TOL1-40-80 F type TOL1-40-80 Z type Accessories Description Application TOL1 mounting base TOL1 mounting base Assembled with TOL1-09~25 to form a complete set Assembled with TOL1-40~80 to form a complete set Pic TOL1 Thermal Relay AC Contactor E-30
  32. 32. Standrad: IEC 60947-4-1 No 1 2 Times of the setting current(A) 1.0 1.15 Any two phases Another phase 0.9 0 Motion time >2h <2h Ambient temperature 20±5°C Cold state Start condition Heat state (Following the No.1 test) Application TOL28 series thermal relay is suitable for using in the circuit rated voltage up to 660V, rated current 93A AC 50/ 60Hz, for over-current protection of AC motor. The relay has the differential mechanism and temperature compensation and can plug in TOC2 series AC contactor. The product conforms to IEC60947-4-1 stardand. TOL28-25 TOL28-36 TOL28-93 TOL28-150 Motion Characteristic: Three-phase Balance Motion Time No 1 2 3 4 Start condition Ambient temperature 10A 10 Cold state Heat state (Following the No.1 test) Cold state 20±5°C 2s<Tp 10s 4s<Tp 10s 63A >63A Times of the setting 1.05 1.2 1.5 7.2 Motion time >2h <2h <4min Phase-losing Motion Characteristic Specification TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D09~32 TOC2-D95 TOC2-D95 TOC2-D95~115 TOC2-D115 1301 1302 1303 1304 1305 1306 1307 1308 1310 1312 1314 1316 1321 1322 2353 2355 3322 3353 3355 3357 3359 3361 3363 3365 4365 4367 4369 Number Setting range (A) 0.1~0.16 0.16~0.25 0.25~0.4 0.4~0.63 0.63~1 1~1.6 1.6~2.5 2.5~4 4~6 5.5~8 7~10 9~13 12~18 17~25 23~32 30~40 17~25 23~32 30~40 37~50 48~65 55~70 63~80 80~93 80~104 95~120 110~140 Type For contactor TOL28-25 TOL28-36 TOL28-93 TOL28-150 TOL28 Thermal Relay E-31
  33. 33. Standrad: IEC 61947-4-1 TOC2-150 TOC2-F115~F185 TOC2-F115~F185 TOC2-F115~F185 TOC2-F115~F185 TOC2-F225~F265 TOC2-F225~F500 TOC2-F225~F500 TOC2-F400~F630 5369 F5357 F5363 F5367 F5369 F5371 F7375 F7379 F7381 Number Setting range (A) 90~150 30~50 48~80 60~100 90~150 132~220 200~330 300~500 380~630 Type For contactor TOL28-630 TOL28-200 TOL28-150 TOL28-200 TOL28-630 Outline and Mounting Dimension Description TOL28-25 mounting base TOL28-36 mounting base Assembled with TOL28-25 to form a complete set Assembled with TOL28-36 to form a complete set Application TOL28-93 mounting base Assembled with TOL28-93 to form a complete set Accessories Pic TOL28 Thermal Relay AC Contactor E-32 TOL28-25 TOL28-36 TOL28-93
  34. 34. Standrad: IEC 60947-4-1 Application TOL3 series thermal relay is suitable for using in the circuits rated voltage up to 660V, rated current 93A AC 50/60Hz, for over-current protection of AC motor. The relay has the differential mechanism and temperature compensation and can plug in TOC3 series AC contactor. The product conforms to IEC60947-5 stardand. Motion Characteristic: Three-phase Balance Motion Time TOL3-33 TOL3-13 TOL3-93 Phase-losing Motion Characteristic No 1 2 3 4 Start conidition Ambient temperature 10A 10 Cold state Heat state (Following the No.1 test) Cold state 20±5°C 2s<Tp 10s 4s<Tp 10s 63A >63A Times of the setting current 1.05 1.2 1.5 7.2 Motion time >2h <2h <4min Times of the setting current(A) 1.0 1.15 Any two phases Another phase 0.9 0 Ambient temperature 20±5°C Motion time >2h <2h Cold state Start condition Heat state (Following the No.1 test) No 1 2 Specification TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-09~38 TOC3-25~32 TOC3-25~32 TOC3-40~95 TOC3-40~95 TOC3-40~95 TOC3-50~95 TOC3-50~95 TOC3-65~95 TOC3-65~95 TOC3-95 D01 D02 D03 D04 D05 D06 D07 D08 D10 D12 D14 D16 D21 D22 D53 2353 2355 3322 3353 3355 3357 3359 3361 3363 3365 Number Setting range (A) 0.10~0.16 0.16~0.25 0.25~0.40 0.40~0.63 0.63~1 1~1.7 1.6~2.5 2.5~4 4~6 5.5~8 7~10 9~13 12~18 16~24 30~38 23~32 30~40 17~25 23~32 30~40 37~50 48~65 55~70 63~80 80~93 For contactorType TOL3-25 TOL3-36 TOL3-93 TOL3 Thermal Relay E-33
  35. 35. Standrad: IEC 61947-4-1 Outline and Mounting Dimension TOL3-93TOL3-36 TOL3-25 Accessories Description Application TOL3-36 mounting base TOL3-93 mounting base Assembled with TOL3-36 to form a complete set Assembled with TOL3-93 to form a complete set Pic TOL3 Thermal Relay AC Contactor E-34
  36. 36. Standrad: IEC 60947-4-1 Application TOL4 thermal relay is suitable for AC 50/60Hz, voltage up to 660V and current up to 630A, general AC motor of long or discontinuous long operation, used as overload protection and has the functions of breaking phase protection, temperature compensation, and trip indication. It can automatically and manually get back. It can be fixed with contactor TOC6 together, also be independtly fixed. The product conforms to IEC60947-4-1 stardand. TOL4-63/Z TOL4-45/Z TOL4-32/Z TOL4-25/Z TOL4-12.5/Z TOL4-80/Z Phase-losing Motion Characteristic No 1 2 Times of the setting current 1.0 1.15 Any two phases Another phase 0.9 0 Motion time >2h <2h Cold state Start condition Heat state (Following the No.1 test) Ambient temperature 20±5°C Specification Number Setting range (A) Type For contactor 0A 0C 0E 0G 0J 0K 1A 1B 1C 1D 1E 1F 1G 1H 1J 1K 2S 0.1~0.16 0.16~0.25 0.25~0.4 0.4~0.63 0.63~1 0.8~1.25 1~1.6 1.25~2 1.6~2.5 2~3.2 2.5~4 3.2~5 4~6.3 5~8 6.3~10 8~12.5 10~14.5 TOL4 12.5/Z TOC6-09 TOC6-12 Number Setting range (A) Type For contactor 0A 0C 0E 0G 0J 0K 1A 1B 1C 1D 1E 1F 1G 1H 1J 1K 2A 2B 2C 0.1~0.16 0.16~0.25 0.25~0.4 0.4~0.63 0.63~1 0.8~1.25 1~1.6 1.25~2 1.6~2.5 2~3.2 2.5~4 3.2~5 4~6.3 5~8 6.3~10 8~12.5 10~16 12.5~20 16~25 TOL4 25/Z TOC6-16 TOC6-22 Motion Characteristic: Three-phase Balance Motion Time 1 2 3 4 Ambient temperature 10A 10 Cold state Heat state (Following the No.1 test) Cold state 20±5°C 2s<Tp 10s 4s<Tp 10s 63A >63A Times of the setting 1.05 1.2 1.5 7.2 >2h <2h <4min No Start conditionMotion time TOL4 Thermal Relay E-35
  37. 37. Standrad: IEC 61947-4-1 TOL4-135 TOL4-150 TOL4-180/F TOL4-400/F TOL4-630/F Specification 1G 1J 2A 2B 2C 2D 2Q 0A 0C 0E 0G 0J 0K 1A 1B 1C 1D 1E 1F 1G 1H 1J 1K 2A 2B 2C 2D 2Q 2R 8M 1G 8A 2B 2C 2D 2E 2F 2T 2P 2V 2U 8W 0A 0C 0E 0G 0J 4~6.3 6.3~10 10~16 12.5~20 16~25 20~32 25~36 0.1~0.16 0.16~0.25 0.25~0.4 0.4~0.63 0.63~1 0.8~1.25 1~1.6 1.25~2 1.6~2.5 2~3.2 2.5~4 3.2~5 4~6.3 5~8 6.3~10 8~12.5 10~16 12.5~20 16~25 20~32 25~36 32~40 36~45 4~6.3 11~17 12.5~20 16~25 20~32 25~40 32~50 40~57 50~63 57~70 63~80 70~88 0.1~0.16 0.16~0.25 0.25~0.4 0.4~0.63 0.63~1 0K 1A 1B 1C 1D 1E 1F 1G 1H 1J 1K 2A 2B 2C 2D 2E 2M 2T 2P 2H 2W 2X 3H 3J 2H 2W 2X 3H 3J 3K 2H 2W 2X 3H 3J 3K 3L 3M 2K 3B 3C 3D 3E 3F 3G 0.8~1.25 1~1.6 1.25~2 1.6~2.5 2~3.2 2.5~4 3.2~5 4~6.3 5~8 6.3~10 8~12.5 10~16 12.5~20 16~25 20~32 25~40 32~45 40~57 50~63 55~80 63~90 80~110 90~120 110~135 55~80 63~90 80~110 90~120 110~135 120~150 55~80 63~90 80~110 90~120 110~135 120~150 135~160 150~180 80~125 125~200 160~250 200~320 250~400 320~500 400~630 TOL4- 32/Z TOL4- 45/Z TOL4- 80/Z TOL4- 63/F TOL4- 63/F TOL4- 135 TOL4- 150 TOL4- 180/F TOL4- 400 TOL4- 630 TOC6-32 TOC6-32 TOC6-38 TOC6-45 TOC6-63 TOC6-75 TOC6-85 TOC6- 09~63 TOC6- 09~63 TOC6-85 TOC6-110 TOC6-140 TOC6-170 TOC6-205 TOC6- 110~400 TOC6-400 For contactor For contactor Number Setting range (A) Type Number Setting range (A) Type TOL4 Thermal Relay AC Contactor E-36
  38. 38. Standrad: IEC 60947-4-1 Outline and Mounting Dimension TOL4-12.5 TOL4-25 TOL4-32 TOL4-180TOL4-80TOL4-63 TOL4-400-630 Type TOL4-400 TOL4-630 50 146 70 11 171 25 4 52 156 71 11 186 30 5 a b c ø e f Accessories Description Application TOL4 mounting base Assembled with TOL4-12.5/Z to form a complete set Pic Assembled with TOL4-80/Z to form a complete set Assembled with TOL4-45/Z to form a complete set Assembled with TOL4-135/Z to form a complete set TOL4 mounting base TOL4 mounting base Terminal block box TOL4 Thermal Relay E-37
  39. 39. Standrad: IEC 61947-4-1 Application TOL5 series thermal relay is used in the circuit of 50/60Hz, rated insulation voltage 660V, rated current 0.1-85A for protecting the phase break when the electric motor is overloaded. The relay has different mechanism and temperature compensation. It can be plugged in TOC5 series AC contactor. The product conforms to IEC60947-4-1. TOL5-40 TOL5-85 Motion Characteristic: Three-phase Balance Motion Time Phase-losing Motion Characteristic Ambient temperature 20±5°C No 1 2 3 4 Start conidition 10A 10 Cold state Heat state (Following the No.1 test) Cold state 2s<Tp 10s 4s<Tp 10s 63A >63A Times of the setting current(A) 1.05 1.2 1.5 7.2 Motion time >2h <2h <4min No 1 2 Ambient temperature 20±5°C Times the setting current(A) 1.0 1.15 Any two phases Another phase 0.9 0 Motion time >2h <2h Cold state Start condition Heat state(Following the No.1 test) Specification 0.14 0.21 0.33 0.52 0.82 1.3 2.1 3.3 5 6.5 7.5 8.5 11 15 19 22 30 34 42 55 65 74 2 heaters 3 heaters Type Nominal current TOL5-22 Ranges Min. 0.1 0.16 0.25 0.4 0.63 1 1.6 2.5 4 5 6 7 9 12 16 Mid. 0.14 0.21 0.33 0.52 0.82 1.3 2.1 3.3 5 6.5 7.5 8.5 11 15 19 TOL5-40 Ranges Min. Mid. Max. TOL5-85 Ranges Min. Mid. Max. Ratings Rated current(A) Element No. Aux. Contact 4 5 6 7 9 12 16 18 24 28 5 6.5 7.5 8.5 11 15 19 22 30 34 6 8 9 10 13 18 22 26 36 40 7 9 12 16 18 24 28 34 45 54 63 8.5 11 15 19 22 30 34 42 55 65 74 10 13 18 22 26 36 40 50 65 75 85 Standard Option 1NO 1NC Auto/Manual 1.8VA/heater AZ-22H TOL5-22/3 TOL5--22 TOL5-22/L TOC5-9,12,18,22 Standard Option 1NO 1NC Auto/ Manual 1.8VA/heater AZ-40H TOL5-40/3 TOL5-40 TOL5-40/L TOC5-32,40 Standard Option 1NO 1NC Auto/Manual 1.8VA/heater AZ-85H TOL5-85/3 TOL5-85 TOL5-85/L TOC5-50,65,75,85 Reset type Power consumption Separate mounting unit Other model Applied contactors Max. 0.16 0.25 0.4 0.63 1 1.6 2.5 4 6 8 9 10 13 18 22 TOL5 Thermal Relay AC Contactor E-38
  40. 40. Standrad: IEC 60947-4-1 TOL5-22 TOL5-40 TOL5-85 Outline and Mounting Dimension TOL5 Thermal Relay E-39
  41. 41. Standrad: IEC 61947-4-1 Application TOQ1 series magnetic starter is mainly applied to circuit of AC 50 or 60Hz,voltage up to 550V for far distance making and breaking circuit and frequently starting and controlling motor. It has the features of small volume, light weight, low power consumption, high efficiency, safe and reliable performance. It complies to IEC947-4-1. TOQ1-25,32 TOQ1-40~95 TOQ1-09,12,18 Specification Type TOQ1-9 TOQ1-12 TOQ1-18 TOQ1-25 TOQ1-32 TOQ1-40 TOQ1-50 TOQ1-65 TOQ1-80 TOQ1-95 Rated current (A) Maximum power AC3 duty (kW) 220/230V 380/400V 415V 440V 500V 660/690V 9 12 18 25 32 40 50 65 80 95 Suitable thermal relay (A) TOL28 D1312 TOL28 D1314 TOL28 D1316 TOL28 D1321 TOL28 D1322 TOL28 D2353 TOL28 D2355 2.2 3 4 5.5 7.5 11 15 18.5 22 25 4 5.5 7.5 11 15 18.5 22 30 37 45 4 5.5 9 11 15 22 25 37 45 45 4 5.5 9 11 15 22 30 37 45 45 5.5 7.5 10 15 18.5 22 30 37 55 55 5.5 7.5 10 15 18.5 30 33 37 45 45 TOL28 D3353 TOL28 D3355 TOL28 D3357 TOL28 D3359 TOL28 D3361 TOL28 D3363 TOL28 D3365 TOL28 D3365 Dimension & Mounting Size TOQ1-09 TOQ1-12 TOQ1-25 TOQ1-40 TOQ1 Magnetic Starter AC Contactor E-40
  42. 42. Standrad: IEC 60947-4-1 Application TOQ2 series star delta reduced voltage starter is suitable for starting motor in the circuit of AC 50/60Hz, voltage up to 660V and current up to 95A. It is provided with a timer for automatic changeover of start- delta to reduce the voltage and current of motor starter. It complies with IEC947-4-1. TOQ2-09,12,18,25,32 TOQ2-40, 50, 65 TOQ2-80, 95 Specification Rated operating current (A) AC3 9 12 18 25 32 40 50 65 80 95 TOQ2-09 TOQ2-12 TOQ2-18 TOQ2-25 TOQ2-32 TOQ2-40 TOQ2-50 TOQ2-65 TOQ2-80 TOQ2-95 3-phase motor capacity (kW) 220V 4 5.5 11 11 15 18.5 25 32 37 45 380V 7.5 11 18.5 22 25 37 55 55 75 80 415V 7.5 11 22 22 25 37 59 59 75 80 440V 7.5 11 22 22 25 37 59 59 75 80 Type Wiring Diagram Outline and Mounting Dimension TOQ2-09~32 TOQ2-40~95 Type A C TOQ2-09 140 149 TOQ2-12 140 149 TOQ2-18 140 154 TOQ2-25 174 164 TOQ2-32 174 169 TOQ2-40 310 185 TOQ2-50 310 185 TOQ2-65 310 185 TOQ2-80 310 196 TOQ2-95 310 196 TOQ2 Star-delta Reduced Voltage Starter E-41
  43. 43. Standrad: IEC 61947-4-1 Specification Type 3-phase Motor Capacity AC3 load 415V Rated Current AC3 415V(A) 0.37kW 0.55kW 1.10kW 1.50kW 2.50kW 4.00kW 5.50kW 7.50kW 11.0kW 15.0kW 0.50HP 0.75HP 1.50HP 2.00HP 3.40HP 5.50HP 7.50HP 10.0HP 15.0HP 20.0HP Direct-on-line, surface mounting Direct-on-line, flush mounting Direct-on-line, surface mounting, reversing Direct-on-line, surface mounting, with isolator 0.74-1.11A 1.11-1.66A 1.66-2.50A 2.50-3.70A 3.70-5.60A 5.60-8.40A 8.40-11.9A 11.4-16.0A 16.0-23.0A 22.0-33.0A Type 3.00kW 5.00kW 7.50kW 10.0kW 15.5kW 22.0kW 30.0kW 4.00HP 6.80HP 10.0HP 13.5HP 20.0HP 30.0HP 40.0HP 3 Phase Motor Capacity AC3 load 415V Star-delta, surface mounting Rated Current AC3 415V(A) 4.30-6.40A 6.40-9.70A 9.70-14.5A 14.5-20.6A 19.7-27.7A 26.0-38.0A 38.0-57.0A TOQ3 TOQ3E Outline and Mounting Dimension TOQ3 TOQ3 Star-delta Starter AC Contactor E-42 TOQ3E
  44. 44. Standrad: IEC 60947-4-1 TOQ4-63A TOQ4-15N TOQ4-30N Application TOQ4 cam starter is mainly used to start torward or backward and stop directly three-phase asyn- chronous elecric motor with AC 50/60Hz, voltage up to 500V and capacity up to 7.5KW. It can also be used for changeover from one ind of circuit to the other. Rated current (A) Motor control capacity (HP) Mechanical life (times) Frequency of operation (per hr) Applications Position of lever 250000 200 200000 180 ON-OFF switching Forward & reverse for 3 pole two circuit ON-OFF switching Forward & reverse for 3 pole rwo circuit 15 30 15 30 15 30 63 100 63 100 63 100 5.5 10 5.5 10 5.5 10 22 30 22 30 22 0-60 60-0-60 60-0-60 0-60 60-0-60 60-0-60 Mark I-O I-O-I I-O-II I-O I-O-I I-O-II TOQ4-15A TOQ4-30A TOQ4-15N TOQ4-30N TOQ4-15P/3 TOQ4-30P/3 TOQ4-63A TOQ4-100A TOQ4-63N TOQ4-100N TOQ4-63/P4 TOQ4-100/P4 Model Specification TOQ4 CAM Starter E-43

×