Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

How to strap_a_snowboard_binding


Published on


  • Be the first to comment

  • Be the first to like this

How to strap_a_snowboard_binding

  1. 1. How to Strap a Snowboard Binding By: Grace Quigley
  2. 2. Introduction Do you know how to bind a snowboard? Well if not I'm going to  show you how. Follow these simple steps and I hope you enjoy them!
  3. 3. To Strap a  Snowboard Binding You Need: <ul><li>To strap a snowboarding binding you need the following materials. A snowboard, two bindings, and two boots MADE FOR SNOWB0ARDING. Regular boots will not work.  </li></ul><ul><li>  Leash is not needed unless preferred. </li></ul>
  4. 4. First Step <ul><li>Strapping a snowboard binding is easier than you think. First, place your boot in the center of the binding. Make sure the back of boot is fully in. </li></ul>Back of the boot should be fully in.
  5. 5. Attach Upper Strap <ul><li>Next take the upper strap with the cushion attached and bring together with accordion strap. Then push together and they will slide through each other. </li></ul>Accordion Strap Cushion Strap
  6. 6. Using The Metal Clamp <ul><li>On each binding there is a metal or plastic clip. When you pull the accordion and cushion strap together you will need to tighten more. Take the upper part of the metal or plastic clamp and pull backwards until the binding is comfortably tight around the top of your foot.  </li></ul>Metal/Plastic Clamp
  7. 7. Bottom Strap <ul><li>Now, take the lower strap and do the                  same except when placing the cushion and                           accordion strap wrap around the toe of your boot.                      Plastic or metal clamp should work the same. </li></ul>This is the toe of the binding
  8. 8. To undo the Binding <ul><li>  </li></ul><ul><li>  </li></ul><ul><li>  </li></ul><ul><li>  </li></ul><ul><li>  </li></ul><ul><li>  </li></ul><ul><li>  </li></ul><ul><li>To undo the bindings take the bottom of the metal/ plastic clip and pull forward. Same for the bottom binding. The clip should slide easily. </li></ul>
  9. 9. If you have a leash.... <ul><li>    </li></ul><ul><li>  </li></ul><ul><li>  </li></ul><ul><li>  </li></ul><ul><li>  If you have a leash (a leash is  </li></ul><ul><li>a cloth strap that connects to  </li></ul><ul><li>your binding and boot that makes </li></ul><ul><li>sure board does not fall off  </li></ul><ul><li>foot) then follow the next steps. </li></ul>
  10. 10. Attach to binding <ul><li>First, attach the side of the leash without clip and tie around one of the holes in your binding. </li></ul>attach the tie to end of binding
  11. 11. Clip to your Boot <ul><li>Clip the metal part of the leash to the shoelace on your boot. </li></ul>this is where the leash attaches to the shoelace
  12. 12. Just Un-clip <ul><li>Finally, just un-clip the  metal from the shoelace. </li></ul>
  13. 13. Thank you for watching <ul><li>Thank you for watching my  slides and I hope you enjoy them. I hope you learned how to undo a snowboard binding and have fun snowboarding! </li></ul>