1.
SMART CITIES RUN ON ELECTRIC WIRE
MINOS SYSTEM: The new era of lighting

2.
What is Minos System?
The system that changes the management and use of outdoor
lighting grids. With just a click and wherever you are.
It allows you to constantly monitor systems‘ status, obtain
operation reports in real time, and decide with flexibility when,
where and how much you wish to switch on, switch off or dim
every unit.
It transforms lighting systems into a new territorial network and
the lamp into an intelligent support capable of activating a wide
range of services to improve the quality of life and make the
cities smart, safe and sustainable.

3.
Advantages & benefits
ENERGY SAVINGS
It reduces energy consumption between 30% and 45% through on / off switching and
dimming of every single lamp.
ENVIRONMENT FRIENDLYNESS
It helps to reduce greenhouse gas emissions and light pollution.
REAL-TIME MAINENANCE
It supplies information about systems‘ status in real time, allows swift, targeted
maintenance and improves the quality of service.
RAPID PAYBACK
Through constant, programmed use of the system, it ensures short payback and
generates new revenues.
SAFETY AND SECURITY
It guaranties provision of the right amount of light exactly where it is needed.
INTEGRATED SERVICES
It transforms the power supply network and lamps into a smart grid capable of
delivering additional services.
ENERGY SAVING
ENVIRONMENT FRENDLY
REAL-TIME MAINTENANCE
RAPID PAYBACK
SAFETY AND SECURITY
INTEGRATED SERVICES

4.
Applications
Towns, railway stations, motorways, airports, ports, car-parks ....
Wherever there is a lighting grid and a light fitting, Minos System can
create savings, efficiency and new services. Guaranteeing the highest
level of compatibility with the existing technology in all contexts,
based on more than 32 years experience.
Railway stations
Architectural lighting
Car park lighting
Tunnels
Ports
Sports arenas Airports
Motorways
Public lighting

5.
Savings & environment
Minos System helps to protect the environment and works
towards the targets set by the international standards. Through
the reduction of energy consumption and targeted scheduling
of maintenance work, it helps to reduce atmospheric green-
house gas emissions, prevents the possible emission of waste
products into the air by failed lights and increases their average
lifetime.
Moreover, thanks to point-to-point remote management, it
allows personalized decisions as to how, where and how much
to save, improving efficiency and quality of service.
ENERGY SAVINGS
• System on / off by means of
astronomical clock and dimming every
single light
• Operating cycle optimization
• Eliminating of daytime operation for
troubleshooting
• Reduction in line losses due to low
power factor
EFFICIENT MAINTENANCE
• Real-time identification of failed
elements
• Optimization of intervention times
• Optimization of inventory and vehicle
management
• Elimination of troubleshooting costs
• Prevention of claims

6.
Plug & Play Architecture
Minos System is a flexible, modular system designed to adapt
to any lighting system. Its ‘open‘ architecture allows software
and hardware devices to be added to enable a whole world of
innovative services and offer a solution tailored to the user‘s
needs. Minos System operates on the Power Line principle,
using the electric lines that supply the lamp, for even high-
speed transfer of data and information.
There is no need for additional wiring.
Software
Minos X
IOS Server
Electrical Panel
Syra
Internet
or GPRS
PowerLine
Andros

7.
Remote lighting management
CCTV
Emergency alerts
Waste depot security
Weather stations
Electric vehicle charging
Pollution monitoring
Digital signage
WiFi
Car park management
Traffic info
Remote meter reading

8.
Supervision software
Full control is just a click away, wherever you are. Minos-X is the
remote management software designed to offer all the benefits of the
internet. You can view all events, program operating cycles and
receive detailed operation reports.
MAIN FUNCTIONS
• Display of all lighting system events
• Automatic statistics for historic data analysis
• Programming of lighting system
• Programming of switch-on, switch-off and dimming of every light fitting
• Loading of ID records for every panel and lamp in the system
• Creation of emergency numbers for sending message alarms to the
maintenance engineer
• Data import / export in Xml or Web services format
• Integrated service management
Remote metering of
electricity, water and
gas consumption
Traffic monitoring
System mapping

9.
CONTACT US FOR AN ENERGY SAVING APPOINTMENT
Central address and telephone number:
Marja van Megen
790 Route d’Annecy
74600 Quintal France
T +33 457 413 141
E info@wesavepower.com