SlideShare a Scribd company logo
1 of 1
Download to read offline
CAD Considerations In FMS CAM Considerations In FMS
Implementation of CAD in following ways:
(a) Library of Parts
- Parts are stored with detailed information including geometry and
attributes
- Aids the product designer who is faced with a very large selection of
potential components when creating a design
- Custom developing a product will require assistance of library
- It must be searchable and provide supportive information to
designer when required
- Designing, populating and maintaining a library of parts data base is
a tedious task but when ready makes system efficient
(b) Group Technology
- Parts in a bin can be grouped and placed as per their similarity with
the help of library of parts
- Wide range of parameters can be used for grouping mixed parts
- Computerization and shorter lead time is possible
- Proves an important step in automation
(c) Special CAD requirements for FMS data
preparation
The usefulness of a model created in
CAD is directly proportional to its intelligence
content like:
(i) Geometry
(ii) Attributes
(iii) Design Cycle Data Preparation
A new part to the FMS is a multistep procedure which includes
considerations of requirements for machining, raw material, material
handling and inspection
With addition of every new part like CAD, CAM also requires same
level of control and flexibility to handle changes
Offline NC, CNC & robot programming and simulation of tool path
generation or robotic arm movement is possible
Department of Mechanical Engineering – M. Tech (CAD/CAM)
Submitted by:
Jyotiraman De
Roll no.-5

More Related Content

What's hot

COMPUTER CONTROL IN PROCESS PLANNING Unit 2 (ME CAD/CAM)
COMPUTER CONTROL IN PROCESS PLANNING Unit 2 (ME CAD/CAM)COMPUTER CONTROL IN PROCESS PLANNING Unit 2 (ME CAD/CAM)
COMPUTER CONTROL IN PROCESS PLANNING Unit 2 (ME CAD/CAM)Avt Shubhash
 
GROUP TECHNOLOGY AND CAPP
GROUP TECHNOLOGY AND CAPPGROUP TECHNOLOGY AND CAPP
GROUP TECHNOLOGY AND CAPPmanimaran m
 
COMPUTER AIDED DESIGN, COMPUTER AIDED MANUFACTURING
COMPUTER AIDED DESIGN, COMPUTER AIDED MANUFACTURINGCOMPUTER AIDED DESIGN, COMPUTER AIDED MANUFACTURING
COMPUTER AIDED DESIGN, COMPUTER AIDED MANUFACTURINGjyyothees mv
 
Cad lecture-1
Cad lecture-1Cad lecture-1
Cad lecture-127273737
 
Cfadw Presentation
Cfadw PresentationCfadw Presentation
Cfadw Presentationmaungwanna
 
Computer aided process planning
Computer aided process planningComputer aided process planning
Computer aided process planningjashid41
 
Computer Aided Manufacturing by Luqman
Computer Aided Manufacturing by LuqmanComputer Aided Manufacturing by Luqman
Computer Aided Manufacturing by LuqmanEngr MUHAMMAD LUQMAN
 
INTELLIGENT DECISION MAKING FOR REACTIVE SCHEDULING IN FMS
INTELLIGENT DECISION MAKING FOR REACTIVE SCHEDULING IN FMSINTELLIGENT DECISION MAKING FOR REACTIVE SCHEDULING IN FMS
INTELLIGENT DECISION MAKING FOR REACTIVE SCHEDULING IN FMSJyotiraman De
 
Computer integrated manufacturing
Computer integrated manufacturingComputer integrated manufacturing
Computer integrated manufacturingjntuhcej
 
CIM Computer Integrated Manufacturing
CIM Computer Integrated ManufacturingCIM Computer Integrated Manufacturing
CIM Computer Integrated ManufacturingTanuVerma39
 
uses of computer in industry,robots,simulations
uses of computer in industry,robots,simulationsuses of computer in industry,robots,simulations
uses of computer in industry,robots,simulationsArooj mughal
 

What's hot (20)

CIM Introduction|Mechanical |Harin Prajapati|GTU
CIM Introduction|Mechanical |Harin Prajapati|GTU  CIM Introduction|Mechanical |Harin Prajapati|GTU
CIM Introduction|Mechanical |Harin Prajapati|GTU
 
FUNDAMENTALS OF CAM By Using MASTERCAM
FUNDAMENTALS OF CAM By Using MASTERCAMFUNDAMENTALS OF CAM By Using MASTERCAM
FUNDAMENTALS OF CAM By Using MASTERCAM
 
CAD/CAM/CIM ( Lecture 2 model construction and product design)
CAD/CAM/CIM ( Lecture 2 model construction and product design)CAD/CAM/CIM ( Lecture 2 model construction and product design)
CAD/CAM/CIM ( Lecture 2 model construction and product design)
 
COMPUTER CONTROL IN PROCESS PLANNING Unit 2 (ME CAD/CAM)
COMPUTER CONTROL IN PROCESS PLANNING Unit 2 (ME CAD/CAM)COMPUTER CONTROL IN PROCESS PLANNING Unit 2 (ME CAD/CAM)
COMPUTER CONTROL IN PROCESS PLANNING Unit 2 (ME CAD/CAM)
 
GROUP TECHNOLOGY AND CAPP
GROUP TECHNOLOGY AND CAPPGROUP TECHNOLOGY AND CAPP
GROUP TECHNOLOGY AND CAPP
 
COMPUTER AIDED DESIGN, COMPUTER AIDED MANUFACTURING
COMPUTER AIDED DESIGN, COMPUTER AIDED MANUFACTURINGCOMPUTER AIDED DESIGN, COMPUTER AIDED MANUFACTURING
COMPUTER AIDED DESIGN, COMPUTER AIDED MANUFACTURING
 
Cad lecture-1
Cad lecture-1Cad lecture-1
Cad lecture-1
 
Cfadw Presentation
Cfadw PresentationCfadw Presentation
Cfadw Presentation
 
Computer aided process planning
Computer aided process planningComputer aided process planning
Computer aided process planning
 
Computer Aided Manufacturing by Luqman
Computer Aided Manufacturing by LuqmanComputer Aided Manufacturing by Luqman
Computer Aided Manufacturing by Luqman
 
Lecture 3 Computer - Aided Manufacturing (CAM)
Lecture 3 Computer - Aided Manufacturing (CAM)Lecture 3 Computer - Aided Manufacturing (CAM)
Lecture 3 Computer - Aided Manufacturing (CAM)
 
Me6703 cim systems
Me6703 cim systemsMe6703 cim systems
Me6703 cim systems
 
CAD CAE CAM Lecture
CAD CAE CAM LectureCAD CAE CAM Lecture
CAD CAE CAM Lecture
 
INTELLIGENT DECISION MAKING FOR REACTIVE SCHEDULING IN FMS
INTELLIGENT DECISION MAKING FOR REACTIVE SCHEDULING IN FMSINTELLIGENT DECISION MAKING FOR REACTIVE SCHEDULING IN FMS
INTELLIGENT DECISION MAKING FOR REACTIVE SCHEDULING IN FMS
 
Computer integrated manufacturing
Computer integrated manufacturingComputer integrated manufacturing
Computer integrated manufacturing
 
ANALYSIS AND REFLECTION ON CAD
ANALYSIS AND REFLECTION ON CADANALYSIS AND REFLECTION ON CAD
ANALYSIS AND REFLECTION ON CAD
 
CIM Computer Integrated Manufacturing
CIM Computer Integrated ManufacturingCIM Computer Integrated Manufacturing
CIM Computer Integrated Manufacturing
 
uses of computer in industry,robots,simulations
uses of computer in industry,robots,simulationsuses of computer in industry,robots,simulations
uses of computer in industry,robots,simulations
 
Cad cam
Cad camCad cam
Cad cam
 
CAD/CAM Lecture #2
CAD/CAM Lecture #2CAD/CAM Lecture #2
CAD/CAM Lecture #2
 

Similar to CAD CAM Considerations For FMS Part Libraries

CAPP , JIT, FMS
CAPP , JIT, FMSCAPP , JIT, FMS
CAPP , JIT, FMSDenny John
 
Chapter 7 automation techniques
Chapter 7  automation techniquesChapter 7  automation techniques
Chapter 7 automation techniquesMohamad Sahiedan
 
COMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNINGCOMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNINGjntuhcej
 
CADISON MATPIPE
CADISON MATPIPECADISON MATPIPE
CADISON MATPIPECADISON
 
Chapter 2 design of production system
Chapter 2  design of production systemChapter 2  design of production system
Chapter 2 design of production systemDr. Ravneet Kaur
 
Software app slides
Software app slidesSoftware app slides
Software app slidesahmong4
 
Computer Aided Process Planning Using Neutral File Step for Rotational Parts
Computer Aided Process Planning Using Neutral File Step for Rotational PartsComputer Aided Process Planning Using Neutral File Step for Rotational Parts
Computer Aided Process Planning Using Neutral File Step for Rotational PartsRSIS International
 
Bim cafm presentation 23 june2014
Bim cafm presentation 23 june2014Bim cafm presentation 23 june2014
Bim cafm presentation 23 june2014Eamonn Roarke
 
Graphic standards and exchange formats
Graphic standards and exchange formatsGraphic standards and exchange formats
Graphic standards and exchange formatskishor kumar
 
Cadcam+introduction
Cadcam+introductionCadcam+introduction
Cadcam+introductionUsmanArgan
 
What is the Digital Thread and Why Is It Important to Me? with Scott Thompson...
What is the Digital Thread and Why Is It Important to Me? with Scott Thompson...What is the Digital Thread and Why Is It Important to Me? with Scott Thompson...
What is the Digital Thread and Why Is It Important to Me? with Scott Thompson...LavaConConference
 
CADCAM CAE Notes
CADCAM CAE NotesCADCAM CAE Notes
CADCAM CAE NotesAbhay Gore
 
evolution of cad/cam
evolution of cad/camevolution of cad/cam
evolution of cad/camDenny John
 

Similar to CAD CAM Considerations For FMS Part Libraries (20)

CAPP , JIT, FMS
CAPP , JIT, FMSCAPP , JIT, FMS
CAPP , JIT, FMS
 
CIM MODULE 2.pptx
CIM MODULE 2.pptxCIM MODULE 2.pptx
CIM MODULE 2.pptx
 
CAD/CAM
CAD/CAMCAD/CAM
CAD/CAM
 
Chapter 7 automation techniques
Chapter 7  automation techniquesChapter 7  automation techniques
Chapter 7 automation techniques
 
COMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNINGCOMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNING
 
CADISON MATPIPE
CADISON MATPIPECADISON MATPIPE
CADISON MATPIPE
 
Chapter 2 design of production system
Chapter 2  design of production systemChapter 2  design of production system
Chapter 2 design of production system
 
Software app slides
Software app slidesSoftware app slides
Software app slides
 
CodeBook at the Conferences
CodeBook at the ConferencesCodeBook at the Conferences
CodeBook at the Conferences
 
Software app slides
Software app slidesSoftware app slides
Software app slides
 
Computer Aided Process Planning Using Neutral File Step for Rotational Parts
Computer Aided Process Planning Using Neutral File Step for Rotational PartsComputer Aided Process Planning Using Neutral File Step for Rotational Parts
Computer Aided Process Planning Using Neutral File Step for Rotational Parts
 
Bim cafm presentation 23 june2014
Bim cafm presentation 23 june2014Bim cafm presentation 23 june2014
Bim cafm presentation 23 june2014
 
UNIT VI-3.pptx
UNIT VI-3.pptxUNIT VI-3.pptx
UNIT VI-3.pptx
 
Graphic standards and exchange formats
Graphic standards and exchange formatsGraphic standards and exchange formats
Graphic standards and exchange formats
 
Cadcam+introduction
Cadcam+introductionCadcam+introduction
Cadcam+introduction
 
Paul Nunn v2
Paul Nunn v2Paul Nunn v2
Paul Nunn v2
 
What is the Digital Thread and Why Is It Important to Me? with Scott Thompson...
What is the Digital Thread and Why Is It Important to Me? with Scott Thompson...What is the Digital Thread and Why Is It Important to Me? with Scott Thompson...
What is the Digital Thread and Why Is It Important to Me? with Scott Thompson...
 
CADCAM CAE Notes
CADCAM CAE NotesCADCAM CAE Notes
CADCAM CAE Notes
 
evolution of cad/cam
evolution of cad/camevolution of cad/cam
evolution of cad/cam
 
CAOS: A CAD Framework for FPGA-Based Systems
CAOS: A CAD Framework for FPGA-Based SystemsCAOS: A CAD Framework for FPGA-Based Systems
CAOS: A CAD Framework for FPGA-Based Systems
 

Recently uploaded

Chapter 9 Mechanical Injection Systems.pdf
Chapter 9 Mechanical Injection Systems.pdfChapter 9 Mechanical Injection Systems.pdf
Chapter 9 Mechanical Injection Systems.pdfFaizanAhmed396943
 
Madani.store - Planning - Interview Questions
Madani.store - Planning - Interview QuestionsMadani.store - Planning - Interview Questions
Madani.store - Planning - Interview QuestionsKarim Gaber
 
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdfLivre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdfsaad175691
 
WAVELET SCATTERING TRANSFORM FOR ECG CARDIOVASCULAR DISEASE CLASSIFICATION
WAVELET SCATTERING TRANSFORM FOR ECG CARDIOVASCULAR DISEASE CLASSIFICATIONWAVELET SCATTERING TRANSFORM FOR ECG CARDIOVASCULAR DISEASE CLASSIFICATION
WAVELET SCATTERING TRANSFORM FOR ECG CARDIOVASCULAR DISEASE CLASSIFICATIONgerogepatton
 
input buffering in lexical analysis in CD
input buffering in lexical analysis in CDinput buffering in lexical analysis in CD
input buffering in lexical analysis in CDHeadOfDepartmentComp1
 
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...Ayisha586983
 
Indian Tradition, Culture & Societies.pdf
Indian Tradition, Culture & Societies.pdfIndian Tradition, Culture & Societies.pdf
Indian Tradition, Culture & Societies.pdfalokitpathak01
 
AntColonyOptimizationManetNetworkAODV.pptx
AntColonyOptimizationManetNetworkAODV.pptxAntColonyOptimizationManetNetworkAODV.pptx
AntColonyOptimizationManetNetworkAODV.pptxLina Kadam
 
priority interrupt computer organization
priority interrupt computer organizationpriority interrupt computer organization
priority interrupt computer organizationchnrketan
 
Introduction to Machine Learning Part1.pptx
Introduction to Machine Learning Part1.pptxIntroduction to Machine Learning Part1.pptx
Introduction to Machine Learning Part1.pptxPavan Mohan Neelamraju
 
Pyrolysis process control: temperature control design and application for opt...
Pyrolysis process control: temperature control design and application for opt...Pyrolysis process control: temperature control design and application for opt...
Pyrolysis process control: temperature control design and application for opt...IJECEIAES
 
TEST CASE GENERATION GENERATION BLOCK BOX APPROACH
TEST CASE GENERATION GENERATION BLOCK BOX APPROACHTEST CASE GENERATION GENERATION BLOCK BOX APPROACH
TEST CASE GENERATION GENERATION BLOCK BOX APPROACHSneha Padhiar
 
ADM100 Running Book for sap basis domain study
ADM100 Running Book for sap basis domain studyADM100 Running Book for sap basis domain study
ADM100 Running Book for sap basis domain studydhruvamdhruvil123
 
Design and Analysis of Algorithms Lecture Notes
Design and Analysis of Algorithms Lecture NotesDesign and Analysis of Algorithms Lecture Notes
Design and Analysis of Algorithms Lecture NotesSreedhar Chowdam
 
Road Development plans of India-Transportation Engineering
Road Development plans of India-Transportation EngineeringRoad Development plans of India-Transportation Engineering
Road Development plans of India-Transportation EngineeringSayli Madhale
 
Analysis and Evaluation of Dal Lake Biomass for Conversion to Fuel/Green fert...
Analysis and Evaluation of Dal Lake Biomass for Conversion to Fuel/Green fert...Analysis and Evaluation of Dal Lake Biomass for Conversion to Fuel/Green fert...
Analysis and Evaluation of Dal Lake Biomass for Conversion to Fuel/Green fert...arifengg7
 
applications of diffrentiability in real life.pptx
applications of diffrentiability in real life.pptxapplications of diffrentiability in real life.pptx
applications of diffrentiability in real life.pptxananditam30
 
Javier_Fernandez_CARS_workshop_presentation.pptx
Javier_Fernandez_CARS_workshop_presentation.pptxJavier_Fernandez_CARS_workshop_presentation.pptx
Javier_Fernandez_CARS_workshop_presentation.pptxJavier Fernández Muñoz
 
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...shreenathji26
 

Recently uploaded (20)

ASME-B31.4-2019-estandar para diseño de ductos
ASME-B31.4-2019-estandar para diseño de ductosASME-B31.4-2019-estandar para diseño de ductos
ASME-B31.4-2019-estandar para diseño de ductos
 
Chapter 9 Mechanical Injection Systems.pdf
Chapter 9 Mechanical Injection Systems.pdfChapter 9 Mechanical Injection Systems.pdf
Chapter 9 Mechanical Injection Systems.pdf
 
Madani.store - Planning - Interview Questions
Madani.store - Planning - Interview QuestionsMadani.store - Planning - Interview Questions
Madani.store - Planning - Interview Questions
 
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdfLivre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
Livre Implementing_Six_Sigma_and_Lean_A_prac([Ron_Basu]_).pdf
 
WAVELET SCATTERING TRANSFORM FOR ECG CARDIOVASCULAR DISEASE CLASSIFICATION
WAVELET SCATTERING TRANSFORM FOR ECG CARDIOVASCULAR DISEASE CLASSIFICATIONWAVELET SCATTERING TRANSFORM FOR ECG CARDIOVASCULAR DISEASE CLASSIFICATION
WAVELET SCATTERING TRANSFORM FOR ECG CARDIOVASCULAR DISEASE CLASSIFICATION
 
input buffering in lexical analysis in CD
input buffering in lexical analysis in CDinput buffering in lexical analysis in CD
input buffering in lexical analysis in CD
 
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
Submerged Combustion, Explosion Flame Combustion, Pulsating Combustion, and E...
 
Indian Tradition, Culture & Societies.pdf
Indian Tradition, Culture & Societies.pdfIndian Tradition, Culture & Societies.pdf
Indian Tradition, Culture & Societies.pdf
 
AntColonyOptimizationManetNetworkAODV.pptx
AntColonyOptimizationManetNetworkAODV.pptxAntColonyOptimizationManetNetworkAODV.pptx
AntColonyOptimizationManetNetworkAODV.pptx
 
priority interrupt computer organization
priority interrupt computer organizationpriority interrupt computer organization
priority interrupt computer organization
 
Introduction to Machine Learning Part1.pptx
Introduction to Machine Learning Part1.pptxIntroduction to Machine Learning Part1.pptx
Introduction to Machine Learning Part1.pptx
 
Pyrolysis process control: temperature control design and application for opt...
Pyrolysis process control: temperature control design and application for opt...Pyrolysis process control: temperature control design and application for opt...
Pyrolysis process control: temperature control design and application for opt...
 
TEST CASE GENERATION GENERATION BLOCK BOX APPROACH
TEST CASE GENERATION GENERATION BLOCK BOX APPROACHTEST CASE GENERATION GENERATION BLOCK BOX APPROACH
TEST CASE GENERATION GENERATION BLOCK BOX APPROACH
 
ADM100 Running Book for sap basis domain study
ADM100 Running Book for sap basis domain studyADM100 Running Book for sap basis domain study
ADM100 Running Book for sap basis domain study
 
Design and Analysis of Algorithms Lecture Notes
Design and Analysis of Algorithms Lecture NotesDesign and Analysis of Algorithms Lecture Notes
Design and Analysis of Algorithms Lecture Notes
 
Road Development plans of India-Transportation Engineering
Road Development plans of India-Transportation EngineeringRoad Development plans of India-Transportation Engineering
Road Development plans of India-Transportation Engineering
 
Analysis and Evaluation of Dal Lake Biomass for Conversion to Fuel/Green fert...
Analysis and Evaluation of Dal Lake Biomass for Conversion to Fuel/Green fert...Analysis and Evaluation of Dal Lake Biomass for Conversion to Fuel/Green fert...
Analysis and Evaluation of Dal Lake Biomass for Conversion to Fuel/Green fert...
 
applications of diffrentiability in real life.pptx
applications of diffrentiability in real life.pptxapplications of diffrentiability in real life.pptx
applications of diffrentiability in real life.pptx
 
Javier_Fernandez_CARS_workshop_presentation.pptx
Javier_Fernandez_CARS_workshop_presentation.pptxJavier_Fernandez_CARS_workshop_presentation.pptx
Javier_Fernandez_CARS_workshop_presentation.pptx
 
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
Introduction to Artificial Intelligence: Intelligent Agents, State Space Sear...
 

CAD CAM Considerations For FMS Part Libraries

  • 1. CAD Considerations In FMS CAM Considerations In FMS Implementation of CAD in following ways: (a) Library of Parts - Parts are stored with detailed information including geometry and attributes - Aids the product designer who is faced with a very large selection of potential components when creating a design - Custom developing a product will require assistance of library - It must be searchable and provide supportive information to designer when required - Designing, populating and maintaining a library of parts data base is a tedious task but when ready makes system efficient (b) Group Technology - Parts in a bin can be grouped and placed as per their similarity with the help of library of parts - Wide range of parameters can be used for grouping mixed parts - Computerization and shorter lead time is possible - Proves an important step in automation (c) Special CAD requirements for FMS data preparation The usefulness of a model created in CAD is directly proportional to its intelligence content like: (i) Geometry (ii) Attributes (iii) Design Cycle Data Preparation A new part to the FMS is a multistep procedure which includes considerations of requirements for machining, raw material, material handling and inspection With addition of every new part like CAD, CAM also requires same level of control and flexibility to handle changes Offline NC, CNC & robot programming and simulation of tool path generation or robotic arm movement is possible Department of Mechanical Engineering – M. Tech (CAD/CAM) Submitted by: Jyotiraman De Roll no.-5