Manual de tarjeta madre- U8668

42,483 views

Published on

Published in: Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
42,483
On SlideShare
0
From Embeds
0
Number of Embeds
199
Actions
Shares
0
Downloads
32
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Manual de tarjeta madre- U8668

  1. 1. U8668--D U8668 DFCC Information and CopyrightThis equipment has been tested and found to c omply with the limits of aC lass B digital device, pursuant to Part 15 of the FCC Rules . T hese limitsare designed to provide reasonable protection agains t harmfulinterference in a residential installation. This equipment generates , usesand can radiate radio frequency energy and, if not ins talled and used inaccordance with the instructions, may c ause harmful interference to radiocommunications . There is no guarantee that interference will not occur ina partic ular installation.The vendor makes no representations or warranties with respec t to thecontents here of and specially disclaims any implied warranties ofmerchantability or fitness for any purpose. F urther the vendor reservesthe right to revise this publication and to make changes to the c ontentshere of without obligation to notif any party beforehand. yDuplication of this publication, in part or in whole, is not allowed withoutfirs t obtaining the vendor’s approval in writing.The c ontent of this user’s manual is subject to be changed without noticeand we w not be responsible for any mistakes found in this us er’s illmanual. A ll the brand and product names are trademarks of theirrespective c ompanies . i
  2. 2. U8668--D U8668 DENGLIS H................................................................................................... 3 U8668-D Features.................................................................................3 Package contents...................................................................................4 Layout of U8668-D (only for version 1.x and 6.x) .........................5 Layout of U8668-D (only for version 3.3).......................................6 Layout of U8668-D (only for version 4.0).......................................7 Layout of U8668-D (only for version 5.x).......................................8 Layout of U8668-D (only for version 5.A)......................................9 Layout of U8668-D (only for version 5.B & above).....................10 Layout of U8668-D (only for version 7.0~7.3).............................. 11 Layout of U8668-D (only for version 7.5~7.7)..............................12 Layout of U8668-D (only for version 7.8 & above)......................13 CPU Installation .................................................................................14 DDR DIMM Mo dules: DDR1-2 ........................................................14 Jumpers, Headers, Connectors & Slots............................................15 TROUB LE S HOOTING..................................................................... 21ES PAÑOL ................................................................................................ 22 Características del U8668-D..............................................................22 Contenido del Paquete .......................................................................23 SOLUCIÓN DE PROBLEMAS ......................................................... 24FRANÇAIS .............................................................................................. 25 Caractéristiques de U8668-D.............................................................25 Contenu de lEmballage.....................................................................26 DÉPANNAGE ...................................................................................... 27Chapter 3: WarpS peeder™ ...................................................................28 ii
  3. 3. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onEnglish U8668-D Features CPU Provides Socket-478. ® ® Support the Intel Pentium 4 Northwood CPU up to 3.06G Hz. ® ® Supports the Intel Pentium 4 478 Prescott CPU (f or v ersion 5.A/5.B and v ersion 7.5 & abov e). - 533FSB with 1024KB L2 Cache - Celeron D (533 FSB with 256KB L2 Cache) Running at 400/533MHz Front Side Bus. Supports Hy per-Threading Technology. Version 7.8 and above do not support Willamette CPU. Standard Intel CPU f an is suggested. Chipset North Bridge: P4M266A South Bridge: VT8235 Main Memory Supports up to 2 DDR devices. Supports 200 /266MHz DDR devices. The largest memory capacity is 2GB. Super I/O Chipset: ITE IT8705. Slots Three 32-bit P bus master slots (for version 3.x, 4.x, 5.x, 5.A, 5.B and 7.x). CI Two 32-bit PCI bus ma ster slots (only f or v ersion 1.x and 6.x). One CNR slot (f or v ersion 3.x, 4 5.x, 5 5.B and 7.x only ). .x, .A, One AMR slo (for version 1.x and 6.x). t One AGP slo t. On Board IDE Supports four IDE disk drives. Supports PIO Mode 4, Master Mode and Ultra DMA 33/66/100/133 Bus Master Mode. LAN (only support for version 3.3) Chip: RTL8201BL. 10/ 100Mbps. Half/Full duplex operation. LAN VIA VT6103/6103L (Only Version 7.8 and abov e support V VT6103L IA chipset.) Dual Speed: 10/100Mbps, Full/Half Duplex. Auto Negotiation: 10/100 Mbps, Full/Half Duplex. 3
  4. 4. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on On Board AC’97 Sound Codec Chip: VIA1612A (for version 3.x, 6.x, and 7.0-7.6) Compliant with AC’97 specification. Supports 2 channel speakers. On Board AC’97 Sound Codec (optional) Chip: CMI9739A (for version 1.x, 4.x, 5.x, 5.A, 5.B, 7.7, 7.8 & abov e) Compliant with AC’97 specification. Supports 6 channel speakers. On Board Peripherals Supports 360K, 720K, 1.2MB, 1 .44MB and 2.88MB f loppy disk driv ers. Supports 1 serial port. Supports 1 VGA port. Supports 1 multi-mode parallel port. (SPP/EPP/ECP mode) Supports PS/2 mouse and PS/2 key board. Supports 6 USB2.0 ports. (Either rear x 4 + f ront x 2 or rear x 2 + front x 4) BIOS AWARD legal Bios. Supports APM1.2. Supports ACPI. Supports USB Function. Operating System Offers the highest performance for MS-DOS, Windows 2000, Windows Me, Windows XP, SCO UNIX etc. Dimensions Micro ATX Form Factor: 19.5cm X 22.8cm (W X L) (only f or v ersion 1.x and 6.x) Micro ATX Form Factor: 19.5cm x 24.4cm (W x L) (only f orv ersion 3 4.x, .x, 5.x, 5.A, 5.B and 7.x)Package contents FDD Cable HDD Cable User’s Manual Fully Setup Driv er CD USB Cable (optional) Rear I/O Panel (optional) 4
  5. 5. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onLayout of U8668-D (only for version 1.x and 6.x) JK BMS1 1 K/ B & Mouse JATX PWR 1 C PU JC FA N 1 S ocket 478 JCO M1 COM1 JA TXPW R2 Pa rall el Port DDR 1 DDR 2 VG A1 JPR NT1 ID E1 ID E2 JVGA 1 JU SBLA N1 Super USB I/O & P4M 266A L AN JAU DIO 10 9 BIOS JA U DIO 1 2 1 A G P1 JC MO S1 LAN JU SB2 1 2 10 C ode c PCI1 1 9 BAT1 2 JGA ME1 16 JSPDIFO 1 1 PCI2 1 15 A MR 1 FD D1 JSFAN 1 JCD IN 1 1 JCI1 1 JPA NEL1 1 1 2 24 JW O L1 1 23Back Panel Connector JKBMS1 JPRNT1 JUSBLAN2 PS/2 LAN Mouse Parallel Line In Speaker Out Mic In PS/2 USB COM1 V GA USB Keyboard JUSB1 JCOM1 JVGA1 JAUDIO 5
  6. 6. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onLayout of U8668-D (only for version 3.3) JKBMS1 JKBS 1 1 1 K/B & Mo use JATX PWR 1 CP U JCFA N1 Soc ke t 478 JCO M1 COM1 JP RNT1 JATX PW R2 P arall e Por t DD R1 DDR2 l VGA1 1 JUS BV2 I DE1 I DE2 JVGA1 JUSBLAN1 Super U SB I/O & P4M 266A LA N JAU DIO 10 9 BIOS JAU DI O1 2 1 AGP 1 JC MOS 1 LAN JUS B2 1 2 10 C od ec P CI 1 1 9 BA T1 2 JGAME1 16 JS P DI FO 1 1 P CI2 1 15 P CI3 1 JUS BV3 JCDI N1 1 JWO L1 1 JS FA N1 CN R1 F DD1 1 JCI 1 JP AN EL1 1 2 24 1 23 Back Panel Connector JKBMS1 JUSBLAN2 JPRNT1 PS/ 2 LAN Mouse Parallel Line In Speaker Out Mic In PS /2 USB COM1 VGA USB Keyboard JUSB1 JCOM1 JVGA1 JAUDIO 6
  7. 7. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onLayout of U8668-D (only for version 4.0) JKBMS1 1 K/B & Mo use JATX PWR 1 CP U JCFA N1 So c ke t 4 7 8 JCO M1 COM1 JP RNT1 JATX PW R2 P arall e Por t DD R1 DDR2 l VGA1 I DE1 I DE2 JVGA1 JUSBLAN1 Super U SB & I/O P4M266A LA N JAU DIO 10 9 BIOS JAU DI O1 2 1 AGP 1 JC MOS 1 LAN JUS B2 1 2 10 C od ec P CI 1 1 9 BAT1 2 JGAME1 16 JS P DI FO 1 1 P CI2 1 15 JCDI N1 P CI3 1 JWO L1 1 JS FA N1 CN R1 F DD1 1 JCI 1 JP AN EL1 1 2 24 1 23 Back Panel Connector JKBMS1 JPRNT1 JUSBLAN2 PS/2 LAN Mouse Parallel Line In Speaker Out Mic In PS/2 USB COM1 VGA USB Keyboard JUSB1 JCOM1 JVGA1 JAUDIO 7
  8. 8. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onLayout of U8668-D (only for version 5.x) JKBMS1 JKBS 1 1 1 K eybo ard & Mo use JATX PWR 1 CP U JCFA N1 So c ke t 4 7 8 JCO M1 COM1 JP RNT1 JATX PW R2 P arall e Por t DD R1 DDR2 l VGA1 1 I DE1 I DE2 JU SBV 2 JVGA1 JUSBLAN1 Super U SB & I/O P4M266A LA N JAU DIO 10 9 BIOS JAU DI O1 2 1 AGP 1 JC MOS 1 LAN JUS B2 1 2 10 C od ec P CI 1 1 9 BAT1 2 JGAME1 16 JS P DI FO 1 1 P CI2 1 15 P CI3 1 JUS BV3 JCDI N1 1 JWO L1 1 JS FA N1 CN R1 F DD1 1 JCI 1 JP AN EL1 1 2 24 1 23 Back Panel Connector J KBMS1 JPRNT1 JUSBLAN2 PS/2 LAN Mouse P arallel Li ne In (Optional) Speaker Out Mic In PS/2 USB COM1 VGA USB Keyboard JUSB1 J COM1 JVGA1 JAUDIO 8
  9. 9. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on Layout of U8668-D (only for version 5.A) JK B M S1 JK B S 1 K eyboard 1 1 & M ouse JA T X PW R 1 CPU JC F A N 1 Socket 478 JC O M 1 COM 1 JP R N T 1 J TXPW R 2 A t ParalelP or D DR1 DD R2 l VGA1 ID E 1 I E 2 D J GA1 V JU SB L A N 1 1 USB JU SB V 2 & P4M 266A LAN J U DI 2 A O JA U D IO 1 1 15 A GP1 16 JC M O S1 2 LAN JU S B 2 1 2 10 Codec P C I1 1 9 BAT1 JW O L 1 JC D IN 1 2 10 1 1 1 JS PD I O 1 F 1 PCI 2 1 JU SB 3 9 VT8235 JSATA 1 S uper 1 I/O PCI 3 1 JU S B V 3 JSATA2 JSF A N 1 CN R1 FDD 1 1 JC I1 B IO S J A NEL1 1 P 2 24 1 23Back Panel Connector JKBMS1 JPRNT1 JUSBLAN2 PS/2 LAN Mouse Parallel Line In (Optional) Speaker Out Mic In PS/2 USB COM1 VGA USB Keyboard JUSB1 JCOM1 JVGA1 JAUDIO 9
  10. 10. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onLayout of U8668-D (only for version 5.B & above) JK B M S 1 JK B S1 1 1 Keyboard & M ouse JA T X P W R 1 CPU JC FA N 1 Socket478 JC O M 1 CO M 1 JPR N T 1 JA T X PW R 2 ralel t P a l Por DDR1 D DR2 VGA1 ID E 1 ID E 2 JV G A 1 1 J SB V 2 U J S BL A N 1 U P4M 266A JA U D I 2 O 10 9 2 1 J U D IO 1 A AGP1 JC M O S 1 LA N 1 2 J SB 2 1 0 U VT8235 C od e c PC I1 1 9 BAT1 J O L 1 JC D I 1 W N 2 10 1 1 1 JSP D IFO 1 1 PC I2 1 9 JU S B 3 JSATA1 ( Op ti on al ) S uper 1 I/O PC I3 JSATA 2 JU S B V 3 ( Op ti on al) 1 JSF A N 1 CN R1 FD D 1 B IO S 1 JC I1 JPA N E L 1 1 2 24 1 23 Back Panel Connector JKBMS1 JPRNT1 JUSBLAN2 PS/2 LAN Mouse Parallel Line In (Optional) Speaker Out Mic In PS/2 USB COM1 VGA USB Keyboard JUSB1 JCOM1 JVGA1 JAUDIO 10
  11. 11. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onLayout of U8668-D (only for version 7.0~7.3) J KBM S1 K/B 1 & Mouse JCF AN1 JATXPWR1 CPU US B So ck et 4 78 & LAN JCOM1 COM1 JATXPWR2 Parallel Por t DDR1 DDR2 VGA1 JP RNT1 ID E1 ID E2 JVGA1 Sup er I/O MI C-IN LIN E-IN SP-OU T P4M2 66 A GAME Por t JA UD _GA ME BI OS 10 9 AGP 1 JA UDIO1 JCMOS1 2 1 LAN JUS B4 1 2 10 Co dec PCI1 1 9 B AT1 2 JGAME1 16 JSP DIF O1 1 2 JUS B2 10 PCI2 1 9 1 15 JCDI N1 PCI3 1 JWOL1 1 JSF AN1 CNR1 FDD1 1 JCI1 1 JPA NEL1 2 1 24 23 Back Panel Connector JKBMS1 JUSBLAN1 PS/2 LAN(Optional) JPRNT1 JGAME1 Mouse Parallel Game Port P S/2 USB COM1 VGA1 Speaker Line In Mic Keyboard Out In JCOM1 JVGA1 11
  12. 12. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onLayout of U8668-D (only for version 7.5~7.7) JKBMS1 1 Key board & Mouse JA TX PWR 1 CPU JC FAN1 Soc ket 478 JUSBLAN1 JCO M1 COM1 JPRNT1 JATXPWR2 P ar allel Po rt DDR1 DDR2 VGA1 IDE1 ID E2 JVGA1 MI C-I N LINE- IN SP-OUT P4M266A GAME Port JAU D_GA ME 10 9 JAUD IO 1 21 AGP1 JCMO S1 LAN JUSB4 1 2 10 C od ec PCI1 1 9 BAT 1 VT8235 JWO L1 JCDIN1 1 2 10 1 1 JSPDIFO1 1 PCI2 1 9 JUSB2 JS ATA 1 Supe r 1 2 10 I/O PCI3 1 9 JU SB3 JS A 2 TA JSFAN 1 CNR1 FDD 1 1 BI OS JPAN EL1 JCI1 1 2 24 1 23 Back Panel Connector JKBMS1 JUSBLAN1 PS/2 LAN(Optional) JPRNT1 JGAME1 Mouse Paral lel Game Port PS/2 USB COM1 VGA1 Speaker Line In Mic Keyboard Out In JCOM1 JVGA1 12
  13. 13. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onLayout of U8668-D (only for version 7.8 & above) JKBMS1 1 Keyb oard & Mouse JCF AN1 JA TXP WR1 CPU So c ke t 47 8 JUSBLAN1 JCOM1 COM1 JP RNT1 JATXP WR2 Parallel P ort DD R1 DDR2 VGA1 ID E1 I DE2 JVGA1 M IC- IN LINE-IN SP-OUT P4M 266A GAME P ort JA UD_G AME 10 9 JAU DIO 1 21 AGP 1 JCMOS1 LAN 1 2 JUSB4 10 Co de c PC 1 I 1 9 BAT1 JWOL1 JCDI N1 VT8235 1 2 10 1 1 JS PDI F O1 1 1 9 PCI 2 JU SB2 JSATA1 Super 1 2 10 I /O PCI 3 1 9 JUS B3 JS ATA 2 JS FAN 1 CNR1 F DD1 1 JCI1 BI OS JP ANEL1 1 2 24 1 23 Back Panel Connector JKBMS1 JUSBLAN1 PS/2 LAN(Optional) JPRNT1 JGAME1 Mouse Paral lel Game Port PS/2 USB COM1 VGA1 Speaker Line In Mic Keyboard Out In JCOM1 JVGA1 13
  14. 14. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onCPU Installation CPU Fan CPU 1. Pull the lever sideway s away from the socket then raise the lever up to a 90-degree angle. 2. Locate Pin A in the socke and loo for the white do or cut edge in the CPU. t k t Match Pin A with the white dot/cut edge then insert the CPU. 3. Press the lever down. Then Put the f an on the CPU and buckle it and put the f an’s power port into the JCFAN1, then to complete the installation. CPU/ S ystem Fan Headers: JCFAN1/ (JS FAN1 => optional) 1 Ground 1 Ground 12 V 12V Sense Sense J CFAN1 JSFAN1DDR DIMM Modules: DDR1-2 DRAM Access Time: 2.5V Unbuffered/ Registered DDR 200 MHz (PC1600)/ DDR 266 MHz (PC2100) Ty pe required. DRAM Ty pe: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module.(184 pin) DIMM Socket DDR Module Total Memory Size Location (MB) DDR 1 64MB/128MB/256MB/512MB/1GB *1 Max is DDR 2 64MB/128MB/256MB/512MB/1GB *1 2GB The list shown abov e f or DRAM configuration is only f or reference. 14
  15. 15. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on How to install DDR DIMM Module 1. The DDR DIMM socket ha a “ Plastic Saf e s ty Tab”, and the DDR DIMM me mory module has an Asy mmetrical notch”, so the DDR DIMM memory module can only f it into the slot in one direction. 2. Push the tabs out. Insert the DDR DIMM memory modules into the so cket at a 90-degree angle, and then push down vertically so that it will f it into the place. 3. The Mounting Holes and plastic tabs should fit over the edge and hold the DDR DIMM memory modules in place.Jumpers, Headers, Connectors & Slots Hard Disk Connectors: IDE1/ IDE2 The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/ 66 100/ 133 functionality. It has two / HDD connectors IDE1 (primary) and IDE2 (secondary). The IDE connectors can connect a master and a slave driv e, so you can connect up to f our hard disk driv es. The f irst hard drive should alway s be connected to IDE1. Floppy Disk Connector: FDD1 The motherboard provides a standard f loppy disk connector tha suppor 360K, t ts 720K, 1.2M, 1.44M and 2.88M flopp disk types. This connector supports the y prov ided f loppy drive ribbon cables. Audio Modem Riser Slot: AMR1 (only for version 1.x and 6.x) (Only support slav e card) The AMR specif ication is an open Industry Standard Architecture and that defines a hardware scalable riser card interface, which supports audio and modem only. Peripheral Component Interconnect Slots: PCI1-3 (only for version 3.x, 4.x, 5x, 5.A, 5.B, 7.x) This motherboard is equipped with 3 standard PCI slots. PCI stands f or Peripheral Component Interconnect, and it is a bus standard for e xpansion cards. This PCI slot is designated as 32 bits. Peripheral Component Interconnect Slots: PCI1-2 (only for version 1.x and 6.x) This motherboard is equipped with 2 standard PCI slots. PCI stands f or Peripheral Component Interconnect, and it is a bus standard for e xpansion cards. This PCI slot is designated as 32 bits. 15
  16. 16. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onAccelerated Graphics Port S lot: AGP1Y our monitor will attach directly to that v ideo card. This motherboard supportsvideo cards for PCI slots, but it is also equipped with an Accelerated Graphics Port(AGP). An AGP card will take adv antage of AGP technology f or improved v ideoefficiency and performance, especially with 3D graphics.Communication Network Riser S lot: CNR1 (optional)The CNR specification is an open Industry Standard Architecture and it defines a ,hardware scalable riser card interf ace, which supports audio and modem only.Front USB Header: JUSB2/ (JUS B3=>only for version 5.A & 5.B,7.2; JUS B4=>only for version 7.x) 2 Pin Assignment Pin Assignment 1 +5V 2 +5V 1 3 Data (-) 4 Data (-) 5 Data (+) 6 Data (+) JUSB2/4 7 Ground 8 Ground 9 Key 10 NAPower Connectors: JATXPWR1/ J ATXPWR2 JATXPWR2 ( ATX 12V Power Connector) JA TX PWR1 ( AT X Ma in P ow er Connec tor )JATXPWR1 PIN Assignment PIN Assignment 1 +3 .3V 11 +3 .3V 2 +3 .3V 12 -12V 3 G round 13 G round 4 +5V 14 PS_O N 5 G round 15 G round 6 +5V 16 G round 7 G round 17 G round 8 PW_OK 18 -5V 9 +5V _S tandby 19 +5V 10 +12V 20 +5V 16
  17. 17. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onJATXPWR2 PIN A ssignment PIN Assignment 1 12V 3 G round 2 12V 4 G roundFront Panel Connector: JPANEL1 PWR_LED SLP (+ ) ( +) (- ) ON/OFF IR 2 24 1 23 (+ ) ( -) SPK RST IR HLED SPK ==> Speaker Conn. HLED ==> Ha rd Driver LED RST ==> Reset Button IR ==> Infrared Conn. SLP ==> Sleep Button PWR_LE D ==> Power LED ON/ OFF ==> Power-on ButtonClear CMOS Jumper: JCMOS JCMOS Assignment Pin 1-2 on Normal Operation 1 (default) Pin 2-3 on Clear CMOS Data 1※ Clear CMOS Procedures: 1 . R emove AC power line. 2 . S et JC MO S1 (2-3 ) closed. 3 . Wait for five seconds . 4 . S et JC MO S1 (1-2 ) closed. 5 . Power on AC . 6 . R eset your desired pass word or c lear the CMO S data.Audio S ubsystem: JAUDIO1/ JCDIN1 10 9 2 1 1 2 1 JA UD IO1 JC DIN 1 (Fro n t Au dio Head er) ( CD-RO M A u dio- In H ead er) 17
  18. 18. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on 22 10 JF_ AU DIO 1 1 9 Pin Ass ignment Pin Assign ment 1 Mic In 2 Ground 3 Mic Power 4 Audio Po wer 5 RT Line Out 6 RT Line Out 7 Reserved 8 Key 9 LFT Line Out 10 LFT Line Out Fro nt Pan el Au dio C onn ecto r/ Ju mper B lock Jump er Se tting C on fig ur ation 1 2 3 4 Pin 5 and 6 5 6 Audio lin e o ut sig nals are rou ted to 7 Pin 9 and 1 0 th e b ack pan el au dio lin e o ut conn ecto r. 9 10 1 2 3 4 5 6 No jum per s Aud io line ou t an d m ic in sign als ar e 7 installed av ailabl e fo r fro nt pan el au dio co nn ector s. 9 10Audio S ubsystem: JCDIN1/ JAUD IO1 (only support for version5.1 & 5.A) 15 1 1 16 2 JAUDIO1 J CDIN1 (Front Audi o Header) (C D-ROM Audio-In Header) 15 1 2 JAUDIO1 16 2 Pin Assignment Pin Assignment 1 Mi c In 2 Ground 3 Mic Power 4 Audio Power 5 Right Line Out 6 Right Line Out 7 Reserved 8 NC 9 Left Line Out 10 Left Line Out 11 Surrender Right 12 Surrender Left 13 Center 14 Subwoof 15 Ground 16 KEY 18
  19. 19. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onGame Header: JGAME1 (o ptional) 2 16 JGAME1 1 15 Pin Assignment Pin Assignment 1 +5V 2 +5V 3 GP6 4 GP4 5 GP2 6 GP0 7 MIDI-OUTR 8 Ground 9 GP3 10 Ground 11 GP7 12 GP1 13 MIDI-INR 14 GP5 15 NC 16 +5VDigital Audio Connector: JS PDIF_OUT1 (optional) S PDIF_Out GND 5V 1 JSPDIF_ OUTWake On LAN Header: JWO L1 (optional) Gr ound 5V Wake up 1 JWOL1Case Open Connector: JCI1 (optional) JCI1 Assignment 1 Normal Operation No jumper (default) installed 1 Case Open Pin 1-2 on 19
  20. 20. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onPower S ource Selection for KB/MS and US B0/1: JKBS 1 (onlyfor version 3.3 and 5.x, 5.A, 5.B) JKBS1 Assignment 1 5V Pin 1-2 on 1 5V_SB Pin 2-3 onPower S ource Selection for USB: JUSBV2/ JUS BV3 (only forversion 3.3 and 5.x, 5.A, 5.B) JUSBV2/3 Assignment 1 5V Pin 1-2 on 1 5V Standby Pin 2-3 on 20
  21. 21. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onTrouble Shooting PROBABLE SOLUTION No power to the system at all Power light * Make sure power cable is securely don’t illuminate, f an inside power supply plugged in does not turn on. Indicator light on * Replace cable key board does not turn on * Contact technical support Syste inoperativ e. Keyboard lights are * Using even pressure on both ends of m on, power indicator lights are lit, hard the DIMM, press down firmly until the driv e is spinning. module snaps into place. Syste does not boot from hard disk m * Check cable running from disk to disk driv e, can be booted f ro optical driv e. m controller board Make sure both ends . are securely plugged in; check the driv e type in the standard CMOS setup. * Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. Syste only boots f rom optical driv e. m * Back up data and applications files. Hard disk can be read and applications Ref ormat the hard driv e. Re-install can be used but booting from hard disk is applications and data using backup impossible. disks. Screen message says “Invalid * Review system’ equipment . Make s Conf iguration” or “CMOS Failure.” sure correct information is in setup. Cannot boot system after installing * Set ma ster/slave jumpers correctly. second hard driv e. * Run SETUP program and select correct driv e types. Call drive manuf acturers f or compatibility with other drives. 21
  22. 22. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onEspañol Características del U8668-D CPU Proporciona Socket-478. Soporta procesador Intel Pentiu 4 de hasta 3.06GHz. m Soporta Intel Pentium 4 478 Prescott CPU. (solamente para v ersión 5.A/5.B en adelante; 7.5 en adelante) Corre a 400/ 533MHz Front Side Bus. Soporta Tecnología Hyper-Threading. La versión 7.8 no admite el procesador Willamette. Se recomienda el ventilador de procesador Intel estándar. Chipset North Bridge: P4M266A South Bridge: VT8235 Memoria Principal Soporta hasta 2 dispositivos DDR. Soporta dispositivos DDR de 200/ 266MHz. Capacidad máxima de memoria 2GB. Super I/O Chipset: ITE IT8705. Ranuras Dos ranuras de 32-bit PCI bus master. (solamente para versión 1.x y 6.x) Tres ranuras de 32-bit PCI bus master. (solamente para versión 3.x, 4.x, 5.x, 5.A, 5.B y 7.x) Una ranura CNR. (sola mente para versión 3.x, 4.x, 5.x, 5.A 5.B y 7 , .x) Una ranura AMR. (solamente para v ersión 1.x y 6.x) Una ranura AGP. IDE Onboard Soporta cuarto discos IDE. Soporta Modos PIO 4, Modo Master y Modo Ultra DMA 33/66/100/133 Bus Master. LAN (solamente soporta para versión de placa madre 3.3) RealTek RTL8201BL. 10/100Mbps. Full/Half Duplex. LAN VIA VT6103/6103L (Sólo la versión 7.8 y posteriores admiten el conjunto de chips VT6103L). Dual Speed: 10/100Mbps. 22
  23. 23. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on Full/Half Duplex. Auto Negociación: 10/100 Mbps, Full/Half Duplex. AC’97 Sound Codec Onboard Chipset: VIA1612A (solamente para v ersión 3.x, 6 y 7.0-7.6) .x, Constituy e con la especificación del AC’97. Soporta 2 canales. AC’97 Sound Codec Onboard (opcional) Chipset: CMI9739A (solamente para v er sión 1.x, 4.x, 5.x, 5 , 5.B, 7.7, 7.8 .A y posteriores ) Constituy e con la especificación del AC’97. Soporta 6 canales. Periféricos Onboard Soporta disquette de 360K, 720K, 1.2MB, 1.44MB y 2.88MB. Soporta 1 puerto serie. Soporta 1 puerto VGA . Soporta 1 puerto paralelo multi-mode. (modo SPP /EPP/ECP) Soporta ratón PS/2 y teclado PS/2. Soporta 6 puertos USB2.0 (2 x traseros + 4 x f rontales/ 4 x traseros + 2 x frontales. BIOS AWARD legal Bios. Soporta APM1.2. Soporta ACPI. Soporta f unción USB. Sistemas Operativos Ofrece el más alto funcionamiento para MS-DOS, Windows 2000, Windows Me, Windows XP, SCO UNIX etc. Dimensiones Factor de Forma Micro ATX: 19.5cm X 22.8cm (W X L) (solamente para v ersión 1.x y 6.x) Factor de Forma Micro ATX: 19.5cm x 24.4cm (W X L) (solamente para v ersión 3.x, 4 5.x, 5.A, 5.B y 7.x) .x,Contenido del Paquete Cable HDD Cable FDD Manual del Usuario Cable USB (Opcional) Panel Trasero I/O (Opcional) Configuración completa del Driver CD 23
  24. 24. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onSolución de Problemas CAUS A PROBABLE SOLUCIÓN No ha corrien en el sistema. La luz de * y te Asegúrese que el cable de transmisión corriente no ilumina, ventilador dentro de esté seguramente enchu ado. f la f uente de alimentación apagada. * Reemplace el cable. Indicador de luz del teclado apagado. * Contacte ayuda técnica. Sistema inoperativo. Luz del teclado * Presione los dos extremo del DIMM, s encendido, luz de indicador de corriente presione para abajo f irmemente hasta iluminado, disco rígido está girando. que el módulo encaje en el lugar. Sistema no arranca desde el disco rígido, * Controle el cable de ejecución desde el puede ser arrancado desde el unidad disco hasta el disco del controlador. óptica. Asegúrese de que ambos lados estén enchu ados con seguridad; controle el f tipo de disco en la configuración estándar CMOS. * Copiando el disco rígido es extremadamente importante. Todos los discos rígidos son capaces de dañarse en cualquier momento. Sistema solamente arranca desde el * Copie datos y documentos de unidad óptica. Disco rígido puede leer y aplicación. Vuelva a f ormatear el aplicaciones pueden ser usados pero el disco rígido. Vuelv a a instalar las arranque desde el disco rígido es aplicaciones y datos usando el disco imposible. de copiado. Mensaje de pantalla ”Inv alid * Revise el equipo del sistema. Conf iguration” o “CMOS Failure.” Asegúrese de que la información conf igurada sea correcta. No puede arrancar después de instalar el * Fije correctamente el puente segundo disco rígido. master/esclav o. * Ejecute el programa SETUP y seleccione el tipo de disco correcto. Llame a una manuf acturación del disco para compatibilidad con otros discos. 24
  25. 25. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onFrançais Caractéristiques de U8668-D CPU Offre les Socket-478. Supporte le processeur Intel Pentium 4 jusqu’à 3.06GHz. Supporte Intel Pentium 4 478 Prescott CPU. (pour v ersion 5.A/5B, e 7.5) t Fonctionnant en Bus Frontal de 400/ 533MHz. Supporte Hy per-Threading. Les versions 7 et plus ne sont pas compatibles a .8 vec les processeurs Willamette. Les ventilateurs pour CPU Intel standard sont reco mmandé s. Chipset North Bridge: P4M266A South Bridge: VT8235 Mémoire Principale Supporte jusqu’à 2 matériels DDR. Supporte des matériels DDR en 200/266MHz. La plus grande capacité mémoire est 2Go. Super E/S Chipset: ITE IT8705. Slots Deux slots de maîtrise de bus PCI 32 bits. (seulment pour version 1.x et 6.x) Trois slots de maîtrise de bus PCI 32 bits. (seulment pour v ersion 3.x, 4.x, 5.x, 5.A, 5 et 7.x) .B, Un slo CNR. (seulment pour version 3.x, 4.x, 5.x, 5.A, 5.B e 7.x) t t Un slo AMR. (seulment pour v ersion 1.x et 6.x) t Un slo AGP t IDE Interne Supporte quatre disques durs IDE. Supporte PIO Mode 4, le Mode Maître et le Mode de Maîtrise de Bu Ultra s DMA 33/66/100/133. LAN (seulment pour version 3.3) RealTek RTL8201BL. 10/100Mbps. Full/Half Duplex. LAN VT6103/6103L (Seules les versions 7.8 e plus sont compatibles avec le t chipset VT6103L). Double Vitesse: 10/100Mbps. 25
  26. 26. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on Full/Half Duplex. Négociation automatique : 10/100 Mbps, Full/Half Duplex. Codec Son AC’97 Interne Chipset: VIA1612A (seulment pour v ersion 3.x, 6.x et 7.0-7.6) Conforme aux spécif ications du codec AC’97. Supporte 2 canaux. Codec Son AC’97 Interne (optionnel) Chipset: CMI9739A (seulment pour v ersion 1.x, 4 5.x, 5.A, 5.B ,7.7, 7.8 et .x, plus) Conforme aux spécif ications du codec AC’97. Supporte 6 canaux. Périphériques Internes Supporte les lecteurs de disquettes 360K, 720K, 1.2Mo, 1.44Mo et 2 .88Mo. Supporte 1 port série. Supporte 1 port VGA. Supporte 1 port parallèle multi-mode. (mode SPP/EPP/ECP) Supporte souris PS/2 et clav ier PS/2. Supporte 6 ports USB2.0 (2 x arrières + 4 x avants/4 x arrières + 2 x av ants) BIOS AWARD legal Bios. Supporte APM1.2. Supporte ACPI Supporte la Fonction USB. Système d’Exploitation Offre les meilleures perf ormances pour MS-DOS, Windows 2000, Windows Me, Windows XP, SCO UNIX etc. Dimensions Facteur de Forme Micro ATX: 19.5cm X 22.8cm (l X L) (seulment pour v ersion 1.x et 6.x) Facteur de Forme Micro ATX: 19.5cm X 24.4cm (l X L) (seulment pour v ersion 3.x, 4 5.x, 5.A, 5.B et 7.x) .x,Contenu de lEmballage Câble de Disque Dur Câble de Lecteur de Disquette Manuel d’utilisation Câble USB (Optionnel) Panneau d’E/S Arrière (Optionnel) CD de Pilote Complet 26
  27. 27. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onDépannage PROBLÈME SOLUTION Pas dalimenta tion au système. Les * Assurez-v ous que le câble v oyants lumineux ne sallument pas, le dalimentation e bien branché st v entilateur à lintérieur du bloc * Remplacez le câble dalimentation ne se me pas en marche. t Le v o ant du clavier ne sallume pas y * Contactez le serv ice dassistance technique. Le système nef onctionne pas. Les * En exerçant une pression uniforme sur v oyants du cla vier sont allumés, les les deux extrémités du DIMM, poussez v oyants de lalimentation aussi, le disque le module vers le bas jusquà ce quil dur tourne. senclenche. Le système ne se réinitialise pas du * Vérif iez le câble du disque à la carte du disque dur, réinitialisation possible contrôleur de disque. Assurez-v ous depuis le lecteur lecteur optique. que les deux extrémités sont bien branchées ; vérif iez le type de lecteur dans la conf iguration standard de CMOS. * Il est très important deffectuer des sauv egardes du disque dur. Les disques durs peuv ent tomber en panne à nimporte quel moment. Le système ne se réinitialise que depuis * Effectuez une sauv egarde des f ichiers le lecteur optique. Le disque dur peut être des données et dapplication. lu et les applications sont utilisables mais Ref ormatez le disque dur. Ré-installez il est impossible deffectuer de les applications et les données réinitialisation depuis le disque dur. sauv egardées sur les disques de secours. Un message saffiche indiquant que la * Vérif iez léquipement du système. conf iguration nest pas valide ou quil y a Assurez-v ous que les informations de une panne du CMOS. la con iguration sont correctes. f Impossible de réinitialiser le système * Réglez les cav aliers maître/esclave après linstallation dun deuxième disque correctement. dur. * Exécutez le programme SETUP et sélectionnez le ty pes de lecteur. s Contactez les fabricants pour tou te question de compatibilité avec les autres disques. 27
  28. 28. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onChapter 3: WarpSpeeder™ 3.1 Introduction [Warp Sp eeder™], a new p owerful control utility, features three user-friendly functions includin g Overclock M anager, Overvoltage M anager, and Hardware Monitor. With the Overclock M anager, users can easily adjust the frequency they p refer or they can get the best CPU p erformance with just one click. The Overvoltage Manager, on the other hand, help s to p ower up CPU core voltage and M emory voltage. The cool Hardware M onitor smartly indicates the temp eratures, voltage and CPU fan sp eed as well as the chip set information. Also, in the About p anel, y ou can get detail descriptions about BIOS model and chip sets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU sp eed are sy nchronically shown on our main p anel. M oreover, to p rotect users computer sy stems if the setting is not approp riate when testing and results in sy stem fail or han g, [Warp Sp eeder™] technology assures the sy stem stability by automatically rebooting the co mputer and then restart to a sp eed that is either the original sy stem sp eed or a suitable one. 3.2 S ystem Requirement OS Sup p ort: Windows 98 SE, Windows M e, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP op erating system includes DirectX 8.1. If you use Windows XP, you do not need to 28
  29. 29. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p oninstall DirectX 8.1.)3.3 Installation 1. Execute the setup execution file, and then the followin g dialo g will pop up . Please click “Next” button and follow the default p rocedure to install. 2. When y ou see the following d ialo g in setup p rocedure, it means setup is completed. If the “Launch the WarpSp eeder Tray Utility” checkbo x is checked, the Tray Icon utility and [WarpSp eeder™] utility will be automatically and immediately launched after y ou click “Finish” button. 29
  30. 30. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on Usage:The following figures are just only for reference, the screen p rinted in thisuser manual will ch an ge accordin g to y our motherboard on hand. 30
  31. 31. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on [WarpSpeeder™] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar. This utility is resp onsible for conveniently invoking [Warp Speeder™] Utility. You can use the mouse by clickin g the left button in order to invoke [WarpSp eeder™] directly from the little tray icon or y ou can right-click the little tray icon to pop up a p op up menu as followin g figure. The “Launch Utility ” item in the p op up menu has the same function as mouse left-click on tray icon and “Exit” item will close Tray Icon utility if selected. 2. Main Panel If y ou click the tray icon, [WarpSp eeder™] utility will be invoked. Please refer to the followin g figure; the utility ’s first window y ou will see is M ain Panel. Main Panel contains fe ature s as follows:a. Disp lay the CPU Sp eed, CPU external clo ck, M emory clock, AGP clock, and PCI clock information.b. Contains About, V oltage, Overclock, and Hardware M onitor Buttons for invoking resp ective p anels.c. With a user-friendly Status Animation, it can rep resent 3 31
  32. 32. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p onoverclock p ercentage stages: M an walking→overclock percentage from 100% ~ 110 % Panther running→overclock p ercentage from 110% ~ 120% Car racin g→ov erclock p ercentage from 120% ~ above3. Voltage Panel Click the V oltage button in M ain Panel, the button will be high lighted and the V oltage Panel will slide out to up as the followin g figure. In this p anel, y ou can decide to increase CPU core voltage and M emory voltage or not. The default setting is “No”. If you want to get the best p erformance of overclock in g, we 32
  33. 33. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on recommend y ou click the op tion “Yes”.4. Overclock Panel Click the Overclo ck button in Main Panel, the button will be high lighted and the Overclo ck Panel will slid e out to left as the following figure. 33
  34. 34. Motthe rboa r d D e sc riipttiion Mo he rboa r d D e sc r p on O ve rclock Panel contains the these features:a. “–3MHz button”, “-1M Hz button”, “+1MHz button”, and “+3MHz button”: p rovide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recom mend you verify every speed you overclock by c lick the Verify button. Or, you can just click Auto overclock button and let [WarpS peeder™ ] automatically gets the best result for you.b. “Recovery Dialog button”: Pop up the following d ialo g. Let user select a restoring way if sy stem need to do a fail-safe reboot. 34

×