2. Profile:
Aacess Cranes & Equipments is an ISO 9001:2008 Certified
Company established in the year 1996, primarily with an aim
to manufacture quality material handling equipments. The
Company operates from its own fully equipped units.
The Company employs 40 people and has a sound
infrastructural base, situated in the state of Andhra Pradesh,
India, wherein we are able to engineer high product
capacities in our unit. In order to manufacture quality
equipments and deliver material in time, we are equipped
with the most modern machinery and equipment required
for manufacturing all types of Material Handling Units.

3. Unit
The Unit is located at Plot No. B 8 &
9/1, IDA Kukatpally, Gandhinagar,
Hyderabad – 500 037, having a
covered area of 10,000 sq. ft. wherein
all the major items like End
Carriages, CT Trolleys, Lifting
Equipments, Control Panels and
Cabins etc., which are critical in
nature are manufactured.

4. Unit - II
Another Unit is located at Plot No.
284/D, Phase III, Industrial Park,
Pashamylaram, Medak Dist, having
a covered area of 25,000 sq. ft.
wherein
the
Bridge
Girders,
Platforms
and
the
necessary
Fabrication works are carried out in
addition to the Assembly and Load
Testing which is also done at this
unit.

5. Infrastructure
Shop Floor Machine
 Lathe Machines - 10 Nos Max. Bed Length is 16 Feet
 Milling Machines - No.2 and No.3
 Radial Drilling Machine – 3 Nos
 Pillar Drilling Machines - 2 Nos
 Slotting Machine - 2 Nos
 Various types of Grinding Machines
 7.5 Ton EOT Crane/12 Mt.Span/5 Mt.Lift – 1 Set
 2 Ton EOT Crane/12 Mt. Span/5 Mt Lift – 1 Set
 150 Ton Hydraulic Press - 1 Set

6. Quality Assurance Systems
“Quality and Endurance of our products are the prime motivating factors
of our Enterprise”. We endeavour to maintain consistency in the quality of
our products and therefore we supervise each stage of production. We have
an aim of producing the best quality products by concentrating on the
quality plan prepared for every product which is taken up for production,
the quality plan is monitored very stringently by each and every one in the
unit.
The major systems followed in quality assurance of the products are:




Incoming inspection of raw material and bought out items.
In Process inspection of assembles and parts being manufactured & assembled
Final inspection of the equipment before dispatch.
Testing of crane as per the requirements laid down by various Indian Standards.

7. Quality Assurance Systems
Major Testing Methods normally adopted in our unit are:
 Dimensional inspection
 Electrical inspection
 Magnetic particle testing
 Ultrasonic testing of materials
 Radiographic testing
 Material analysis
 Hardness testing
 Load testing

8. Our Strength
The Company is backed by Strong Design, Manufacturing and Service
Personnel, who strive hard to work as a team, to deliver qualitative
material handling products.
Even though ours is an SSI Unit, we use most modern tools to Design,
Manufacture and Commission our units.
Some of the techniques/tools used by us are
 Crane Design Software exclusively developed for designing all kinds of cranes by meeting all the
requirements of IS 3177, 807 & 800, thereby ensuring zero fault in designing and processing of data.
 Implementation of ERP Package - SAP B1 in both the units, so as to have efficient control over all the
resources.
 Computerized Project Management by using Programme Evaluation and Review Technique (PERT)
in order to ensure that the work moves as per the schedule, by ensuring adherence to the committed
deliveries.

9. Products
 Gantry Cranes








Double Girder EOT Cranes
Single Girder EOT Cranes
Jib Cranes
Wire Rope Hoists
Motorized Winches
Goods Lifts
Welding Rotators
Cable Laying Capstan Winches

10. Gantry Cranes
We offer customized design solutions for our clients by way of manufacturing
high quality Single/Double Girder Gantry Cranes ranging from 5 Tons to 100
Tons capacity and spans to a maximum of 40 mts. The special features of our
Gantry Cranes are:
 Optimum Design of the Structure avoiding dead weight
and reducing the cost of the equipment.
 Minimum Maintenance and low running cost.
 Simplified Open Type Design which allows for ease of
maintenance.
 Wide Selection of Operational Speeds, as per the
requirement of the Customer.
 Robust Design to withstand Severe Outdoor Climatic Conditions.
 Provide 3 Piece Design to facilitate ease of assembly at
site thereby reduction in transportation cost.
 Competitive Prices.
 Pendant and Radio Remote Control options.

11. Double Girder EOT Cranes
We offer customized design solutions for our clients by way of manufacturing
high quality Double Girder EOT Cranes ranging from 5 Tons to 100 Tons
capacity and spans to a maximum of 45 mts. The special features of our Double
Girder EOT Cranes are:
 Low head room which in turn reduces the cost
of the shed/building.
 Minimum maintenance and low running cost.
 Simplified open type design which allows for
easy maintenance.
 Wide selection of operational speeds as per
the requirement of the customer.
 Customized Design.
 Competitive Prices.
 Welded box Girder Design.
 Pendent and Radio Remote Control systems options.

12. Single Girder EOT Cranes
We Design and Manufacture Single Girder EOT Cranes ranging from 1
Ton to 15 Ton capacity and spans to a maximum of 20 mts. The special
features of our Single Girder EOT Cranes are:
 Optimum design of the structure avoiding dead
weight and reducing the cost of the equipment.
 Low head room which in turn reduces the cost of
the shed/building.
 Minimum maintenance and low running cost.
 Simplified open type design which allows for easy
maintenance.
 Customize Design.
 Competitive Prices.

13. Magnet Cranes
We offer customized design solutions for our clients by way of manufacturing
high quality Magnet Cranes ranging from 5 Tons to 25 Tons capacity and spans
to a maximum of 35 mts. The special features of our Magnet Cranes are:








Magnets used are either Elec Magnets/Elec Per Magnets.
Provided with a Magnetic Beam.
Minimum Maintenance and low running cost.
Wide selection of operational speeds.
Customized Design with slewing beam fitted with magnets.
Competitive Prices.
Welded Box Girder Design.
Pendent Radio Remote and Cabin Operated Control options.

14. Partial EOT Cranes
We Design and Manufacture Single Girder Partial EOT Cranes ranging from
1 Ton to 20 Ton capacity and spans to a maximum of 20 mts. The special
features of our Single Girder Partial EOT Cranes are:
 Very much suitable for Power House Cranes where
these Cranes are used for maintenance.
 Optimum design of the structure avoiding dead
weight and reducing the cost of the equipment.
 Low head room which in turn reduces the
cost of the shed/building.
 Customized Design to match the budget
of the customer.
 Highly Competitive Prices as only long Trave drive is
powered.

15. Jib Cranes
We offer customized design solutions for our clients by way of
manufacturing high quality Self Supported Jib Cranes ranging from 1 Ton to
5 Tons capacity and a maximum arm length of 6 mts. The special features of
our Jib Cranes are:
 Optimum design of the structure avoiding dead
weight and reducing the cost of the equipment.
 Provision for bottom and top lock to restrict
Jib movement.
 Facility to provide full 360 deg rotation of the Jib.
 Heavy Bearings used for smooth movement of the Jib.
 Box Type Structure used for Construction of the Pillar.
 Minimum Maintenance and Low Running Cost.
 Competitive Prices.

16. Wire Rope Hoists
We Design and Manufacture Wire Rope Hoists ranging from 1 Ton to 15
Ton capacity and lift to a maximum of 20 mts. The special features of our
Wire Rope Hoists are:
 Simplified Open Type Design Allowing ease in
maintenance.
 Customized Design.
 Minimum Maintenance and Low Running Cost.
 Competitive Prices.

17. Motorized Winches
We Design and Manufacture Motorized Winches ranging from 5 Tons to 25 Tons
Capacity. The Special Features of our Motorized Winches are :




Minimum Maintenance and Low Running Cost.
Open Type Design Allowing ease of Maintenance
Wide Selection of Operational Speeds.
Competitive Prices.

18. Goods Lifts
We Design and Manufacture Goods Lifts ranging from 1 Ton to 10 Tons
capacity. the special features of our Goods Lifts are:
 Goods Lifts one Designed up to Six Floors.
 Goods Lifts one Designed with a Self Supporting Structure
 Provided with PLC Control Unit & VVVF Drive for
Hoisting
 Minimum Maintenance and Low Running Cost.
 Open Type Design which Allows for Ease of Maintenance.
 Wide Selection of Operational Speeds.
 Customized Design.
 Competitive Prices.

19. Welding Rotators
We Design and Manufacture Welding Rotators for welding heavy jobs which
one circular. This equipment is mainly used in Pipeline Industry for
undertaking continuous welding. The special features of our Welding
Rotators are:
 Minimum Maintenance and Low Running Cost.
 Simplified Open Type Design which Allows for Ease
of Maintenance.
 Customized Design.
 Competitive Prices.
 Soft start for smooth pick up.
 Wide selection of operational speed.

20. Cable Pulling Capstan Winch
We Design and Manufacture Cable Pulling Capstan Winches required for
under ground cable pulling. The special features of our equipment are:
 The unit is Hydraulically Operated and has a step less






speed control.
The unit is powered by a Turbo charged Diesel engine.
Pulling Capacities from 3 ton to 20 ton are available.
PLC Controlled and HMI Operated with Auto Cut off.
Option for taking the print out of the values.
Continues display of the length of cable being pulled.
Totally enclosed and Protected and can towed by a
prime mover.

22. Inter Bay Transfer Cars
We Design and Manufacture Inter bay Transfer Car which are Driven either
Electrically/DC Battery/IC Engine and these are basically used for
transporting material from one bay to another bay and in between factories.
The special features of our equipment are:
 The trolleys are either powered using AC electrical
power or a DC Battery or an IC Engine.
 Speeds up to 50 mts/min can be provided.
 Loading Capacities from 3 ton to 200 ton are available.
 Efficient Control Options can be Provided.
 Dedicated Battery Chargers can be provided to Battery
Operated Units.
 Operator Cabin can be Provided.
 Totally enclosed and Protected and can towed by a
prime mover.

23. Our Esteemed Clients
Government and Public Sector Industries
 M/s. Hindustan Aeronautics Ltd. Bangalore
 M/s. National Aerospace Laboratories, Bangalore
 M/s. BHEL, Hyderabad, Tiruchirapalli, Ranipet,
Jhansi & Jagdishpur
20/10 TON EOT CRANE - B.H.E.L, TRICHY
 M/s. Hindustan Shipyard Limited, Visakhapatnam
 M/s. DMRL & DRDL, Hyderabad
 M/s. Indian Railways
 M/s. BARC, Mumbai
10 TON MAGNETIC CRANE–HINDUSTAN
SHIPYARD LTD, VIZAG

24. Our Esteemed Clients
Major Private Sector Industries
 M/s. Larsen & Toubro Ltd.
 M/s. Jaiprakash Associates Ltd.
 M/s Asian Paints India Ltd.
 M/s. Kirloskar Brothers Ltd.
 M/s. KCP Sugars and Industries Corporation Ltd.
35 TON CAP. GANTRY CRANE UNDER
ERECTION AT JAI PRAKASH ASSOCIATES
 M/s. Nagarjuna Constructions Company Ltd.
 M/s. Jeypore Sugar Company Ltd.
 M/s. Megha Engineering and Infrastructure Co. Ltd.
 M/s. Indu Projects Ltd.
 M/s. B.Seenaiah & Company Ltd
EOT CRANE AT HAL, BANGALORE

25. Contact Us
UNIT - I
Address
:
Tel
:
Fax
:
Contact Person :
e-mail
:
UNIT - II
Plot No: B/8 & 9/1, IDA, Kukatpally, Gandhinagar,
Hyderabad, A.P., India – 500 037
+91 40 23078064
+91 40 2372 0040
Mr. Rafe +91 9866309943, +91 9959222275
info@aacess.com, ae_crane@rediffmail.com
Address
:
Plot No:284/D, Phase – III, Pashamaylaram,
Medak (Dt), A.P., India – 502 319
: +91 8455 224108
+91 9866309943
Tele/Fax
Mobile
:
e-mail
: 1nfo@aacess.com
,
ae_crane@rediffmail.com