Started to create milestones, we Klassic Klarol Filters Private Limited marked our presence in the year 1991 and operates in the manufacturing/servicing of Permanent Installation, Benefits, Why Should KLAROL Be Installed Permanently On A Hydraulic Powerpack ?, Benefits, KLAROL COC-2 Mobile Machine since 20 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Permanent Installation, Benefits, Why Should KLAROL Be Installed Permanently On A Hydraulic Powerpack ?, Benefits, KLAROL COC-2 Mobile Machine, Engine Oil Cleaning Systems & Purification Systems that has made us to deepen our roots in the market. We Klassic Klarol Filters Private Limited breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
5. Machine Filters cannot remove contamination
smaller than clearances of critical components.
6. Machine Filters cannot remove water which can act as
a catalyst to increase acid value.
Effects of Metal Catalyst & Water on Oil Oxidation
0.17
0.9 0.65 0.89
8.1
11.2
12
10
8
6
4
2
0
without metal
catalyst or
water
water only iron only copper only iron plus water copper plus
water
Amount of Oil Oxidation
(Nutralization Number)
1. Test oil - Turbine oil - viscosity 32cSt / 100 degrees F (37 degrees C)
2. Oil temperature 200 degrees F (93 degrees C)
7.
8. Machine Filters cannot remove air which is a
destructive contaminant !
Symptoms of aeration in fluid include:
Higher component noise levels.
Erratic system performance.
Premature pump failures.
Increased fluid temperatures.
Fluid viscosity changes.
Loss of fluid lubricity properties.
Oxidation of fluid.
Thermal degradation - Did you know that compressing an air bubble from
ambient pressure to 3,000 psi increases the bubble's temperature to more than 2,000
degrees F? This is hot enough to thermally degrade oil at the boundary contact between
the air and the bubble, which darkens the oil, sometimes giving it a sooty appearance,
and causes varnish to build up on component surfaces.
9. At higher oil pressures components require cleaner oils.
12. Oil degradation can be the cause of numerous sources of potential
collateral damage to the machine that are described below:
Corrosion
Acid attacks component surfaces, causing pitting and surface degradation.
Varnishing
Polymers and oxides are other by-products of the oxidation process. Varnish deposits on servo,
proportional and other tight-clearance hydraulic valves result in sticking, which can slow or stop
operation.
Loss of Lubricity
Oxidation affects the physical properties of the oil, altering its flow and lubrication characteristics.
Foaming and Air Entrainment
The moment the base oil begins to degrade, the interfacial tension properties of the oil start to
decline. Interfacial tension (related to surface tension) is the physical property that describes the
ease with which oil separates from insoluble materials such as air and water.
In hydraulic systems, entrained air produces sponginess and loss of precision control, again due to
the air’s compressibility.
Filter Plugging
Varnish deposits and sludge can cause rapid filter depletion (a big cost on some machines).
Likewise, the entrainment of water due to poor demulsibility properties adversely influences the
filterability of the oil.
14. IT IS THEREFORE IMPORTANT
THAT WE USE AN ADDITIONAL
OIL CLEANING SYSTEM WHICH
IS CAPABLE OF REMOVING
SOLID PARTICLES, WATER,
OXIDISED LIGHTER WEIGHT
MOLECULES OF OIL
& AIR AND GASES FROM
THE OIL IN USE.
15. KLAROL ---The Technology
An oil cleaning device capable of removing solid,
water, oxidised lighter weight molecules of oil,
air & gaseous contaminants from any oil.
Designed and developed in Germany.
Field tested in India on a variety of applications.
Tested by Indian Institute of Petroleum.
Clean oil ensures - NO MORE OIL CHANGE !
16. KLAROL----Benefits
Ensures Super-Clean oil at all times.
Increases machine life by protecting components like
Proportional Valves/Servo Valves, expensive pumps,
Hydrostatic bearings…etc
Ensures better machine operation.
Ensures more production and better product quality.
Can increase oil life indefinitely.
Reduces pollution.
Economical to use and quick return on investment.
Clean oil increases machine life !
17. KLAROL—How Does It Super-Clean Oil
Klarol Cleans Oil In Two Stages.
Stage 1 Removes solid contamination by:
Depth filtration.
Electrostatic attraction.
Stage 2 Removes water, fuel, entrained air
and gases by evaporation.
Clean oil ensures more productivity !
18. How does Klarol clean contaminated oil
Outlet for water vapour,
air & gases, lower weight
cracked molecules of oil.
20. KLAROL---Applications.
Klarol can be used to clean oil as a
mobile machine.
Klarol can be installed directly on any
machine as a by-pass oil cleaning
unit.
Clean oil ensures better product quality !
21. CONTROL
PANEL
KLAROL MLC--VP-M
VACUUM PUMP
KLAROL
PURIFIERS
10 AND
FIVE MICRON
FILTERS
149 MICRON FILTER
PRE HEATER
KLAROL MOBILE OIL CLEANING MACHINE
23. Klarol Installed on a Hydraulic Power Pack in Bhushan
Steel Ltd. Angul, Odisha
24. KLAROL – DIRECT INSTALLATION DIAGRAM
(Using a pressure reducing valve)
KLAROL
PURIFIED OIL RETURNS BY GRAVITY
1
2
3
4
5
OIL LEVEL
MACHINE TANK
1. Suction strainer
2. Equipment pump
3. High pressure oil to system
4. Pressure reducing valve
5. Low pressure oil to Klarol
25. Cleanliness levels of Oil
NAS Class 9: indicates the particulate levels of hydraulic fluid as
received from the refinery or oil supplier.
NAS Class 7: indicates the particulate level of hydraulic fluid
required for most conventional hydraulic systems that
do not include hydraulic pressure regulators or
hydraulic servo-control valves
NAS Class 5: indicates the particulate level of hydraulic fluid
required for hydraulic systems when there are
hydraulic pressure regulating valves and hydraulic
servo-valves .
31. KLAROL CAN CLEAN OIL FROM ISO 21/18 TO
12/10 ……Or from NAS 12 TO NAS 4.
ISO -/21/18
>5μm = 1,000,000 to 2,000,000 particle
per 100ml
>15μm = 130,000 to 250,000 particles per
100ml
ISO -/12/10
>5μm = 2,000 to 4,000 particles
per 100ml sample
>15μm = 500 to 1,000 particles per
100ml sample
32. KLAROL – PATCH TEST RESULTS
BEFORE CLEANING
Measured quantity of oil is passed through a 0.8 micron filter membrane under vacuum to get the above visual particle contamination level.
AFTER CLEANING
Improper method for testing the contamination level of hydraulic oils !!
33. KLAROL – LABORATORY TEST REPORT.
SPECIFICATIONS BEFORE
CLEANING
AFTER
CLEANING NEW OIL
APPEARANCE HAZY CLEAR CLEAR
VISCOCITY @
40°C 51 cst 47 cst 46.5 cst
WATER CONTENT 3.88% NIL NIL
FLASH POINT 224° 227° 228°
ACIDITY mg
KOH/g 1.02 1 1
MILLIPORE
SOILDS More than NAS 12 NAS 6
(Better than new oil)
NAS 9
Test results of Hydraulic oil 46 cleaned by Klarol
34. KLAROL - IN COMPARISON WITH OTHER
TECHNOLOGIES….
DESCRIPTION KLAROL ELECTROSTATIC
(LVDH)* CENTRIFUGE
IS ONE MACHINE CAPABLE OF
REMOVING EMUSIFIED WATER
CONTAMINATION AIR & GASES.
YES NO NO
CONTAMINATION HOLDING
CAPACITY OF CANNISTER /
COLLECTOR
UPTO 10
KG UPTO 4.5 KG -
LOW COST OF MAINTAINENCE YES NO NO
FILTERS OIL QUICKLY YES NO YES
METHOD OF FILTRATION
DEPTH
FILTRATION,
ELECTROSTATIC
ATTRACTION
ELECTROSTATIC
ATTRACTION
CENTRIFUGAL
FORCE
CAN IT REMOVE HIGH METAL
CONTENT FROM OILS YES NO YES
35. LEVEL OF OIL CONTAMINATION BY THE THREE OIL MAINTENANCE METHODS.
Klarol not being used for cleaning
oils
Klarol mobile machine being used.
Klarol system installed directly
Contaminated oil
Super-clean
oil
NEW
OIL
C0MPARISON OF OIL CLEANING METHODS
Highly Contaminated Oil
NAS 4
36. KLAROL- UTILITY
Klarol oil cleaning systems can be utilized to clean
almost all industrial oil such as :-
HYDRAULIC OILS
COMPRESSOR OILS
TRANSMISSION OILS
SYNTHETIC OILS
ENGINE OILS
GEAR OILS
TURBINE OILS
HONING OILS
WATER GLYCOL
KEROSENE & ANY OTHER INDUSTRIAL OILS
37. LIST OF SOME STEEL UNITS USING KLAROL OIL
CLEANING MACHINES.
TISCO
JINDAL STAINLESS LTD.
BHUSHAN STEEL LTD.
ELECTROSTEEL CASTINGS
ESSAR STEEL.
RATHI IRON AND STEEL
INDUSTRIES LTD.
AARTI STEEL LTD.
VARDHMAN SPECIAL STEELS
LTD.
KAMINENI STEEL AND
POWER INDIA LTD.
(SAIL) BHILAI STEEL LTD.
FORTUNE METALIKS LTD.
GOODLUCK STEEL TUBES LTD
42. Prevention better than cure !
Prevention of contamination is more cost-effective than
the cure.
Ensure the following always:
• Proper breathers to prevent contaminated air from entering reservoir.
• Well designed reservoirs to ensure settling of heavy particles & water to
be drained at intervals.
• Drum stored horizontally to prevent water ingress.
• Recycling of oil regularly or use it to prevent long-term degradation.
• Filtered oil going into and out of the reservoir.