Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Habonim Valves for the biotech industry

1,126 views

Published on

The TuBore™ line is Habonim’s clean ball valves for the Biotech industry.
For More Info habonim-biotech.com

Published in: Education
  • Login to see the comments

  • Be the first to like this

Habonim Valves for the biotech industry

  1. 1. Valves and solutions for the BioTech industry
  2. 2. ASME BPE 2014 The ASME BPE standard provides requirements for systems and components that are subject to cleaning and sanitization and/or sterilization including systems that are cleaned in place (CIP) and/or steamed in place (SIP) and/or other suitable processes used in the manufacturing of biopharmaceuticals.
  3. 3. Regulations Title 21 CFR – Code of Federal Regulations in the United States. Chapter 1 Title 21 CFR is the title for pharmaceuticals. USP – USP: United States Pharmacopeia, Classes V and VI In vivo animal biological reactive tests for polymeric materials FDA – Food and Drug Administration
  4. 4. Where used? • Process Support Systems (Indirect Impact) – Purified water and WFI – Nitrogen and other Process Gases – Clean steam – Compressed air – Heating and cooling systems – Steam and hot water systems – Process vacuum systems – Potable water – Mechanical seal fluids
  5. 5. Valve design concept • Cleaning and maintaining sterility • Minimize dead legs • Material conformity • No entrapment • Flushing of internal cavities • Proper drainage • Valve manifold assemblies • Proper slope (1-2 %, 0.6°– 1.2°, 10 – 20 mm per meter) • Minimize distance between valves
  6. 6. 48 series TuBore™ valve features • True bore flow • Bubble tight Shut-off • Non-exposed body bolts • Cast or forged made body and ends • HermetiX™ stem seal • TFM seats FDA approved • 25 Ra max standard surface finish • ISO 5211 for cast valves • Locking Device (LD), Fugitive Emission (FE) and spring return handle (SRH) mountable
  7. 7. Materials • Castings A351 CF3M (316L) • Forged Stainless steel 316L/1.4435 • Ferrite level < 5% (< 1% optional) • Controlled Sulfur 0.005 – 0.017% • FDA approved soft materials PTFE, TFM or virgin PEEK • Stainless steel bolts, nuts and handle • Optional - Alloy-C22 castings, AL6XN, Alloy 20, Other exotic alloys
  8. 8. Polishing & electro-polishing • Standard 25 Ra max • 15 Ra max for special applications • Improve Cleanability • Enhance corrosion resistance • Removes inclusions
  9. 9. Design features • Fully drainable valve • FDA approved materials • High Cv • Excellent Shutoff • Unexposed seats and ball • Blowout proof Stem • Simple to Maintain • Easy to Actuate
  10. 10. End connections • IMPERIAL – Clamp ends (TC) – Extended tube OD (ETO) – ASME BPE • METRIC – DIN Clamp ends (TCD) • DIN 32676 – DIN Extended tube (ETD) • DIN 11850 – Extended tube (ETI) • ISO 1127 – ISO Clamp ends (TCI) • ISO 2852
  11. 11. Seats design • No slots or chamfers • Low torque • Bubble tight • TFM material • Cavity filler (optional)
  12. 12. Cleaning testing & packaging • In-House assembly • Oil free assembly area • DI Water • Vacuum oven dry • 100% testing • Helium leak test • Nitrogen bagged • Marking & MTR’s
  13. 13. Locking Device • Locked In last position • In-Line assembly • Spring loaded • 6 mm pad lock (not included) • Sizes ½” to 1½” • Stainless steel
  14. 14. Flush Tank TuBore™ valve • Manual or actuated • Extended mounting kits • Special balls for draining • Cavity or Flush ports
  15. 15. CIP ball design • Flush in open position
  16. 16. • Existence of “Dead Leg” in pipe lines may cause contamination and rejection of valuable process batch • Habonim introduced to the market a complete line of “Zero pocket” valves which eliminates bacteria colonies development Valve designs for the BioTech Industry
  17. 17. ‘Zero Pocket’ Elbow valves
  18. 18. ‘Zero Pocket’ Single Horizontal Cross SHC
  19. 19. Zero Pocket valve
  20. 20. 5-way zero pocket valve
  21. 21. Zero Pocket valves No other manufacturer could offer a solution other than cavity filler • Close coupled ring main distribution • Ease of maintenance • Disassembly of downstream pipework with no affect on valve functionality. • Fire Safe design

×