www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
Feb 2013
Precision Tooling for Aerospace Composites
ISO 9001 : 2008
Overview
Founded in 1962, Weber Manufacturing Technologies Inc. is a leading manufacturer of
precision too...
ISO 9001 : 2008
COMPOSITE CUSTOMERS
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
TOOLING PACKAGES: Example - BOEING 787
300 tools = Lay-up Mold’s,...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
FIXTURES and MODELS – DIAMOND JET
• Aluminum / REN bond tools, fi...
ISO 9001 : 2008
• Invar 36
• Steel
• Aluminum
• NVD Nickel Shells
• Billet, Castings
• Welded Construction
TOOLING MATERIA...
ISO 9001 : 2008
• Examples of aluminum or steel matched molds for press
molding of interior Aerospace panels
• Ask for the...
ISO 9001 : 2008
Example of INVAR
lay up tool for
deep part
CAD design for
welding 5 pre-
shaped sheets
together on frame
C...
ISO 9001 : 2008
Bell 429
Completed nose
cone tool and
frame
+120 other tools
AEROSPACE
APPLICATIONS
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
COLLAPSIBLE ATL MANDREL
• Weber has successfully worked with Auto...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
LAY-UP TOOLING
• Weber is a Boeing Approved Tool Supplier
• Nicke...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
LAY-UP TOOLING
• Multi Tool Program of Nickel Lay up tools for Si...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
NVD Nickel Lay up tool for high temp
Polyimides >300 Celsius (600...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
•No welding of the shell to the frame.
•Perimeter standoffs are p...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
• Trim and drill fixtures
• Production assembly
fixtures for wind...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
MACHINING FIXTURES
220 Inches
Aerospace Machining Fixture With Va...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
PRESS TOOLING
Pratt and Whitney PW4168
• Acoustic Panel Sections
...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
•Jet fan spinners
•Large round multi-piece tooling
•Updated manuf...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
RTM PROCESS
Full tool being closed
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
RTM PROCESS – PRATT & WHITNEY
Pratt F117-PW-100 engine for C-17
•...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
3 cavity single vane RTM mold
• Coffin and cross sections
RTM PRO...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
4 cavity single vane RTM mold
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
OUT OF AUTOCLAVE
See separate presentation
ISO 9001 : 2000 Regist...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
• Conformal temperature distribution using water
• Piping for hea...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
NVD OPERATIONS
ISO 9001 : 2000 Registered
www.webermfg.ca
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
• World’s largest Nickel Vapor Deposition facility
• Modern, comp...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
- NVD shell tooling - high strength and lightweight
- Flexible to...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
NVD SHELL BASED TOOLING OFFERS…
• Conformal Heating/Cooling -> Fa...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
Material
P20 Tool
Steel
Aluminum Invar NVD Nickel
Density
lb / in...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
NVD NICKEL VS ELECTROFORMED SHELL
1. 25mm per 2000 hr deposition ...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
DESIGN &
MANUFACTURING
ISO 9001 : 2000 Registered
www.webermfg.ca
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
• Extensive CAD/CAM capabilities
• 10 workstations running:
• UG-...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
PROGRAM MANAGEMENT
• On Time deliveries are paramount at Weber.
•...
ISO 9001 : 2008
CERTIFICATIONS
• Quality standard is ISO 9001:2008
• Registered with Canadian Controlled
Goods Program - R...
ISO 9001 : 2008
• Weber is Certified to CSA Standard
W47.1 by The Canadian Welding
Bureau
• Approved for participation in ...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
Manufacturing and Mold Making
Departments
Weber has a large numbe...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
Equipment Highlights
• State of the art machining.
• Hypermill 5-...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
Equipment Highlights
Ingersoll Master Mill
• 5-Axis simultaneous ...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
Equipment Highlights
Droop & Rein Copy Mill
• Large load capabili...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
CNC GUNDRILLS
Equipment Highlights
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
ASSEMBLY BAY SET UP FOR MULTIPLE MOLD BUILDS
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
• 2 Computer Controlled CMM’s
• Certification of Models, Tooling ...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
•REN or epoxy models
•Manufacturing of patterns
for casting of al...
ISO 9001 : 2008
In House Handwork
Handwork Department Deals With Steel,
Aluminum, Nickel, & Invar Molds
Weber’s Handwork a...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
Equipment Highlights
Tryout Presses
Wemhoner 3250 ton
• Fully reb...
www.webermfg.ca
ISO 9001:2000 REGISTERED
ISO 9001 : 2008
Customers from around the world
choose Weber to take advantage of...
ISO 9001 : 2008
16566 Highway 12
P.O. Box 399
Midland, ON L4R 4L1 CANADA
Direct
Mobile:
Email:
(705) 527-2976
(705) 527-21...
Upcoming SlideShare
Loading in …5
×

Aerospace

831 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
831
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
20
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Aerospace

  1. 1. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 Feb 2013 Precision Tooling for Aerospace Composites
  2. 2. ISO 9001 : 2008 Overview Founded in 1962, Weber Manufacturing Technologies Inc. is a leading manufacturer of precision tooling for Automotive, Aerospace, and Home/Building Products. Located in Midland, Ontario, Weber is a privately held Canadian company. Weber offers high quality tooling in steel, invar and aluminum, and precision CNC machined aluminum parts. Over the last 20 years, Weber has offered nickel shell tooling using the Nickel Vapor Deposition (NVD) process. This process is also used for capturing fine surface detail, such as leather and wood grains, and authentically replicating them into hard tools. 140 employees, 135,000 sq. ft. facility Certified ISO 9001:2008 On-site CAD Design capable (UG NX, CATIA V5R20) Modern simultaneous 5-Axis CNC machining centers Full complement of CNC contour mills, gun-drills, vertical mills, and EDM machines Canadian Controlled Goods Program registered (Satisfies US-ITAR requirement)
  3. 3. ISO 9001 : 2008 COMPOSITE CUSTOMERS
  4. 4. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 TOOLING PACKAGES: Example - BOEING 787 300 tools = Lay-up Mold’s, Trim & Drill Fixture’s and Hot Drape Form Tools (Invar, REN Board and Aluminum)
  5. 5. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 FIXTURES and MODELS – DIAMOND JET • Aluminum / REN bond tools, fixtures and prototypes
  6. 6. ISO 9001 : 2008 • Invar 36 • Steel • Aluminum • NVD Nickel Shells • Billet, Castings • Welded Construction TOOLING MATERIALS Welded Invar 36 tool Aluminum and Nickel: tools and parts Weber offers a range of materials and experience for your tooling requirements
  7. 7. ISO 9001 : 2008 • Examples of aluminum or steel matched molds for press molding of interior Aerospace panels • Ask for the Weber presentation on high pressure SMC tooling or Automotive interior tooling AEROSPACE APPLICATIONS
  8. 8. ISO 9001 : 2008 Example of INVAR lay up tool for deep part CAD design for welding 5 pre- shaped sheets together on frame Close up of INVAR surface finish quality AEROSPACE APPLICATIONS
  9. 9. ISO 9001 : 2008 Bell 429 Completed nose cone tool and frame +120 other tools AEROSPACE APPLICATIONS
  10. 10. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 COLLAPSIBLE ATL MANDREL • Weber has successfully worked with Automated Dynamics on challenging projects, such as designing and building this multi-piece ATL tooling for an Aircraft Fuselage Test Section PROCESS APPLICATIONS
  11. 11. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 LAY-UP TOOLING • Weber is a Boeing Approved Tool Supplier • Nickel tools for 787-8 leading edge of vertical stabilizer PROCESS APPLICATIONS
  12. 12. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 LAY-UP TOOLING • Multi Tool Program of Nickel Lay up tools for Sikorsky Black Hawk UH60M PROCESS APPLICATIONS • Aluminum collapsible APU duct tooling
  13. 13. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 NVD Nickel Lay up tool for high temp Polyimides >300 Celsius (600F process) Nickel Shell Application PROCESS APPLICATIONS
  14. 14. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 •No welding of the shell to the frame. •Perimeter standoffs are pre-machined as round counter-bored blanks and placed on deposition mandrel. •The shell is placed on the welded frame and screwed into position. Nickel Shell Design •Encapsulations for tooling holes •Encapsulations for vacuum through the shell
  15. 15. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 • Trim and drill fixtures • Production assembly fixtures for windscreen • Welded and machined 407 bonding fixture • ‘Soft’ Master models FIXTURES and MODELS
  16. 16. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 MACHINING FIXTURES 220 Inches Aerospace Machining Fixture With Vacuum Holding A2C2 Double Vane Machine Fixture A2C2 Doublet Bond Fixture A2C2 Single Vane Machine Fixture
  17. 17. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 PRESS TOOLING Pratt and Whitney PW4168 • Acoustic Panel Sections Innovative Weber tool design Multiple parts and steel tools • Tools mold-in >3700 holes into the part • Inspection fixture and preform tools also supplied by Weber
  18. 18. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 •Jet fan spinners •Large round multi-piece tooling •Updated manufacturing process •Reverse engineered to confirm existing drawings •Integrated fluid heated design to eliminate ovens and permit stationary tool layup, debulk and cure. RTM PROCESS – Aluminum tooling
  19. 19. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 RTM PROCESS Full tool being closed
  20. 20. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 RTM PROCESS – PRATT & WHITNEY Pratt F117-PW-100 engine for C-17 •Jet fan splitter •Large round multi-piece tooling •Updated manufacturing process •Reverse engineering to confirm existing drawings •Integrated Oil heated design to eliminate ovens
  21. 21. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 3 cavity single vane RTM mold • Coffin and cross sections RTM PROCESS – Steel Tools
  22. 22. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 4 cavity single vane RTM mold
  23. 23. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 OUT OF AUTOCLAVE See separate presentation ISO 9001 : 2000 Registered www.webermfg.ca ISO 9001 : 2000 Registered www.webermfg.ca
  24. 24. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 • Conformal temperature distribution using water • Piping for heating/cooling attached onto back of 8mm shell • Rapid temperature response capability 75 C/min (135 F/min) OUT OF AUTOCLAVE PROCESS – Thermal performance
  25. 25. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 NVD OPERATIONS ISO 9001 : 2000 Registered www.webermfg.ca
  26. 26. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 • World’s largest Nickel Vapor Deposition facility • Modern, computer controlled plant, built in 2000 • 400,000 lbs annual Ni deposition capacity • NVD nickel is 99.98% pure • 1.74m X 3m shell size capacity • Speed is 0.25mm per hour, 6mm in 1 day. • Superior process to Electroformed Nickel NVD NICKEL PRODUCTION FACILITY Chemically convert nickel to solid shapes
  27. 27. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 - NVD shell tooling - high strength and lightweight - Flexible tool design options including: • Undercut geometry • Encapsulated features for mounting and location, injection, ejection, shear edges, mechanisms, etc • Welded shell construction for very large parts - For Multiple Molds, Replicate Cavities: • Are identical • Cost less than alternative machining • Are easy to replace if damaged • Replacement timing is weeks NVD SHELL TOOLING FEATURES
  28. 28. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 NVD SHELL BASED TOOLING OFFERS… • Conformal Heating/Cooling -> Faster cycle time • Uniform nickel shell wall thickness -> Improved thermal distribution • Mold release -> Fine grain structure • Mold durability -> 34 – 38 Rc hardness • Weldability –> allows for repairs or joining of multiple shells • Fast Process (0.25 mm/hr) -> ¼” in 1 day ! • Reusable mandrel for duplicate shells -> Repeatable accuracy • Short duplicate shell delivery times -> ~ 2-4 weeks • Significant cost savings for duplicate shells • CNC Machined Metallic Mandrels -> Accurate shells, greater part quality • NVD Shells are virtually stress free -> Accurate shells
  29. 29. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 Material P20 Tool Steel Aluminum Invar NVD Nickel Density lb / in3 0.282 0.098 0.293 0.322 kg / m3 7800 2720 8130 8910 Yield Strength psi 143000 7980 40000 61400 MPa 990 55 276 411 Stiffness psi 30 x 106 10 x 106 21 x 106 17 x 106 GPa 205 70 145 114 Thermal Expansion in / in oF 7.0 x 10-6 12.9 x 10-6 0.7 x 10-6 7.2 x 10-6 mm / mm oC 12.6 x 10-6 23.6 x 10-6 1.3 x 10-6 13.1 x 10-6 Thermal Conductivity Btuin Ft2hr oF 201 1452 73 610 W / m oC 29 210 11 88 Hardness Brinell 270-480 20-160 120-180 330-380 MATERIAL PROPERTIES
  30. 30. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 NVD NICKEL VS ELECTROFORMED SHELL 1. 25mm per 2000 hr deposition rate 2. Shell thickness is not uniform 3. Inherent residual stresses 4. Cavities made simultaneously from different mandrels 5. Problematic variation from cavity to cavity 6. Replace damaged shell in 16-30 weeks 7. Cannot do hollow 8. Sulfates contamination from electroplating bath = difficult welding + de-lamination risk 1. 25mm per 100 hr deposition rate 2. Uniform thickness & temperature 3. Negligible residual stress 4. Cavities made sequentially from the same mandrel 5. Little variation from cavity to cavity 6. Replace damaged shell in 3 weeks 7. Hollow deposition possible in many cases 8. 0.999 pure Ni – weldable and no de- lamination 9. No environmental impact (closed system)
  31. 31. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 DESIGN & MANUFACTURING ISO 9001 : 2000 Registered www.webermfg.ca
  32. 32. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 • Extensive CAD/CAM capabilities • 10 workstations running: • UG-NX, IDEAS, Catia • Innovative designers are working with customers to contribute to processes and provide tooling solutions. • Our team manages all information and supports the machining, assembly and CMM teams. • Strict revision control on all documents and designs. • Part of the Weber focus of building relationships and responding to customer needs. • CAD data transfer in: 1. STEP, IGES and VDA (BI-DIRECTIONAL) 2. IDEAS NX5 (NATIVE) 3. CATIA V5R20 (NATIVE) 4. UNIGRAPHICS NX6 and NX7.5 (NATIVE ) 5. SOLID-EDGE V20 (NATIVE) TOOL DESIGN
  33. 33. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 PROGRAM MANAGEMENT • On Time deliveries are paramount at Weber. • Manufacturing schedules reviews conducted weekly. • Progress reports are sent to customers bi-weekly. • In House transportation within North America. • Global customs expertise - We export and import responsibly.
  34. 34. ISO 9001 : 2008 CERTIFICATIONS • Quality standard is ISO 9001:2008 • Registered with Canadian Controlled Goods Program - Registration No. 22921 • CWB W47.1, W59 Welding certificates
  35. 35. ISO 9001 : 2008 • Weber is Certified to CSA Standard W47.1 by The Canadian Welding Bureau • Approved for participation in the Canadian Wood Products Certification Program (CWPCP) •Registration Number: CA-00047 •D6-56202 – Approved Boeing Northwest Provisioner Tooling Supplier CERTIFICATIONS
  36. 36. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 Manufacturing and Mold Making Departments Weber has a large number of Machining, Fabrication and Assembly bays to suit all the shapes and sizes of your tooling
  37. 37. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 Equipment Highlights • State of the art machining. • Hypermill 5- Axis software. • 590 in/min max cutting speed with 8,000-10,000 RPM. • Machining aerospace parts Five 5-Axis Deckel Maho Machining Centers
  38. 38. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 Equipment Highlights Ingersoll Master Mill • 5-Axis simultaneous capable. • 5 different cutting head attachments. 4,000 -10,000 RPM. All automatically loaded and unloaded. • Large work envelope • X-236 inches • Y-137 inches • Z-40 inches • Table capable of taking 88,000 pound block. • Utilizes HyperMill/PowerMill Machining Software.
  39. 39. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 Equipment Highlights Droop & Rein Copy Mill • Large load capability - 66,000 pounds. • Twin Spindle – simultaneous mirror image machining capability. Excellent for roughing. • Large machining envelope • X- 138 Inches • Y- 117 Inches • Z- 33 Inches • Cutting Software – Powermill.
  40. 40. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 CNC GUNDRILLS Equipment Highlights
  41. 41. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 ASSEMBLY BAY SET UP FOR MULTIPLE MOLD BUILDS
  42. 42. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 • 2 Computer Controlled CMM’s • Certification of Models, Tooling Aids, Molds, Steel & Finished Parts to Math Data • Diffracto Class-A Surface Quality Verification • Certificate of Conformance • Detailed Inspection Reports sent to Customer QUALITY ASSURANCE
  43. 43. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 •REN or epoxy models •Manufacturing of patterns for casting of aluminum face sheet or mandrels •Aluminum castings can include cast-in-place heating/cooling lines if required IN HOUSE PATTERN SHOP
  44. 44. ISO 9001 : 2008 In House Handwork Handwork Department Deals With Steel, Aluminum, Nickel, & Invar Molds Weber’s Handwork and Polishing Department can handle all types of mold finishes including Class A and High Diamond Polish
  45. 45. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 Equipment Highlights Tryout Presses Wemhoner 3250 ton • Fully rebuilt in 2005/6 • Steam and Oil Heating capability • Full vacuum system for molding Class “A” SMC panels Ott 500 ton • Steam and Oil Heating Capability • Vacuum system
  46. 46. www.webermfg.ca ISO 9001:2000 REGISTERED ISO 9001 : 2008 Customers from around the world choose Weber to take advantage of: 1. EXPERIENCE - Over 45 years of mold-making experience producing a wide range of large, class A, custom mold solutions in P20 steel, NVD Nickel, Invar and Aluminum. 2. INNOVATION – Design knowledge gained from experience in various competitive markets is continually applied for new engineering developments. 3. CAPACITY & CAPABILITY – Large, fully integrated Mold Design and Manufacturing Shop can handle large tools, and manage large, multiple tool programs efficiently, and professionally. 4. NVD NICKEL SHELLS – A unique mold making material, NVD nickel shell tooling provides an alternative for rapid, accurate, high quality composite production. Class A surfaces and conformal heating & cooling designs support shorter cycle times and uniform mold face temperatures.
  47. 47. ISO 9001 : 2008 16566 Highway 12 P.O. Box 399 Midland, ON L4R 4L1 CANADA Direct Mobile: Email: (705) 527-2976 (705) 527-2123 rob.sheppard@webermfg.ca Tel: Fax: Web Page: (705) 526 -7896 [Main] (705) 526 - 3818 http://www.webermfg.ca Direct: Mobile Email: SALES OFFICES GERMANY Thomas Helle European Sales Agent Tel: Mobile: Email: +49 (0) 7021 978 558 +49 (0) 171 637 7550 tom@helle-t.de HEAD OFFICE Tom Schmitz Business Manager (705) 527-2956 (705) 527-2154 tom schmitz@webermfg.ca Robert Sheppard Vice President Greg Leidig U.S. Sales Agent Mobile: Email: (419) 481-3645 Greg.leidig@webermfg.ca UNITED STATES of AMERICA

×