Amptweaker Tight Metal manual kullanim klavuzu gitarpazar

398 views

Published on

Amptweaker Tight Metal manual kullanim klavuzu gitarpazar

Ayrıntılı bilgi: http://www.gitarpazar.com/amptweaker-tight-metal

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
398
On SlideShare
0
From Embeds
0
Number of Embeds
14
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Amptweaker Tight Metal manual kullanim klavuzu gitarpazar

  1. 1. TM good tone comes from tweaking ... Welcome! Thanks for purchasing your Welcome! Thanks for purchasing your TightMetal™ pedal, another Amptweaker™ handmade product pedal, the first Amptweaker™ designed with desigded with consumersʼ advice. After the success of the TightDrive™, I received many requests for other gain pedals. The TightMetal is a high gain distortion pedal, and includes a special Chomp gate setting that really stops the notes hard! It works great either in front of a clean channel or into the effects return. Keep those ideas coming! James Brown, Amp Engineer Cool Ideas: • True Bypass switching–buffered when pedal is ON • Tight Attack control lets YOU dial in the chunk • Gain, Volume, and Tone with Mid-Thrash switch • 2 position gate with Chomp setting for hard stops • Pre/Post selectable Effects Loop-tracks Bypass Switch! • Battery On/Off switch with red ʻDonʼt Forgetʼ indicator • LED lit knobs when using a DC adapter • 14 Ga. steel chassis with magnetic sliding battery door
  2. 2. How does the Volume–a Master Volume, set for some boost or balance with bypassed levels work? Tone–EQ, shelves highs up and down to balance with low-end Output Jack– connect to the next pedalʼs input or to amp True Bypass Switch–when bypassed, the guitar signal bypasses all circuitry. When active, this circuit is buffered, to avoid signal loss. Mid SW–two different midrange settings, normal and Thrash– which is more heavily scooped GateʻChompʼ makes the note stop hard! Tight– set higher for an aggressive, chunky attacklower for thick, fatter distortion In Jack–from the guitar or previous effect. The battery disconnects when unplugged DC Jack– use regulated 9V– 18VDC supply center pin(-) grounded–9V sounds like a 50W amp tone while 18V is a cleaner, louder 100W tone. Like a variac!
  3. 3. EFX Loop Switch–selects Pre(before) or Post(after) position for the Loop. Usually Compressors sound best on Pre, while Delays & Reverbs sound better on Post LEDs–light up the knobs if an adapter is used Battery Door– The battery door is held closed by a magnet, and can be opened just by pulling sideways Battery Switch– This switch turns off the battery when not in usenot active when using an adapter Effects Send & Return– Itʼs easy to create your own effects chains using this series loop– and the added effects track with the TightMetalʼs On/Off Switch Specs: • Input impedance: 100K Ohm (effect on) • Output Impedance: 1K Ohm (effect on) • Current: 12mA with 9V battery, 28mA with 9V adapter, 45mA with 18V adapter(adds knob LEDs) • Housing: 14 Gauge galvanized steel • Weight: 2 pounds, Dimensions: 3.75”W X 5”D X 2”H • Adapter: 9-18VDC adapter w/ 5.5mm X 2.1mm positive barrel center (-)ground
  4. 4. Other Tips & Tricks: • Effects like compressors, treble boosters, octavers, overdrives/distortion work best with the Effects Loop set to Pre. • Effects like delay, reverb, EQ, chorus, vibe/tremolo, and most others tend to sound best with the Loop set to Post. • Add an overdrive/distortion/boost pedal in the Effects Loop (set to Pre) to give this even more distortion! • Add an overdrive/booster pedal in the Effects Loop (set to Post) to give more output level to this pedal. • If youʼre having difficulty getting the tone you like, try connecting the output of the TightMetal into your ampʼs effects return or power amp input–bypassing the preamp. • The Thrash position of EQ reduces the mids, so for more low-end, switch to Thrash, turn down the Tone, and crank up the Volume–the result will be more low-end. • Select Pre/Effects Send to use it as a switchable ʻcleanʼ send to another effects chain, tuner input or amp. • Select Post/Effects Send to send to some other amp AFTER the TightMetal for a big stereo solo tone. • When using extremely high settings on the Tight control, you might need to increase your ampʼs bass control.. TM good tone comes from tweaking . . . Amptweaker, LLC 5885 Cumming Hwy, Suite 108-98 Sugar Hill, GA 30518 Handmade in USA www.amptweaker.com ©2012 Amptweaker, LLC

×