Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Replacement Canopy for Clayton Gazebo D71 M80930


Published on

  • Be the first to comment

  • Be the first to like this

Replacement Canopy for Clayton Gazebo D71 M80930

  1. 1. OWNER’S Product code: D71 M80930 UPC code: 7-6945575811-8 MANUAL Vendor Item: C-I-138-2NGZReplacement Canopy for Clayton gazebo Date of purchase: _____/ _____/ _____ 1
  2. 2. Gazebo Replacement Canopy PARTS Read through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by two people is recommended. A (1) B (6) Orignal Canopy Frame New Canopy Fabric (not included in this package) ACCESSORIESUse the follwing parts from your orignal gazebo Use the follwing parts from the hardwareCa (6) Cd (1)Bolt Assembly Instructions SheetCb (12) Ce (1)Metal Washer Allen WrenchCc (6) Cf (1)Nut Open Hex Wrench 2
  3. 3. Gazebo Replacement Canopy Special WarningAssemble your gazebo on a soft, non-abrasive surface to avoid damage. The gazebo is heavy. Use care when handing.Assembly by four adults is recommended. The gazebo is not intended to be a permanent structure. Take it down duringhigh winds or it may be damaged.KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRICThe canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabricwill burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabricmay render the flame-resistant properties ineffective. CaASSEMBLY INSTRUCTIONS Fig. 1 Cb A Cb Cc Process of removing gazebo canopy1 Pull the bars of gazebo frame (A) from the canopy pockets. Remove the bars of the canopy frame out of the brackets of the legs. See Fig. 1. A Fig. 22 Pull out the short top bars of the canopy frame (A) from the wind vent canopy. Then remove the canopy from the canopy frame (A). See Fig. 2. A Process of replacing new gazebo canopy3 Attach the canopy fabric (B) to the assembled canopy frame (A). Insert each top short bar into each top pocket A of the canopy frame. Pull down the canopy and spread the canopy top to the location. See Fig. 3. Fig. 3 B 3
  4. 4. Gazebo Replacement Canopy4 Place the completed canopy onto the top of the assembled leg posts. Make sure each crossbar is between two edges of the canopy. Line up the holes, for each hole insert a Ca bolt (Ca) through a metal washer (Cb), short bar, a bracket, Fig. 4 Cb A another metal washer (Cb) and secure with a nut (Cc). Cb Don’t tighten completely. Repeat procedure for the remaining Cc five short bars. Tighten all bolts and nuts. Pull down the edge of the canopy and insert each bar of the canopy frame (A) into the pocket of the canopy. See Fig. 4. Affix inner edges with Velcro tabs. Your gazebo with new canopy is now ready for use. CARE INSTRUCTIONS Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents. Cover furniture with outdoor furniture covers when not in use. Please refer to part numbers when reordering For questions or comments about product: Call toll-free: 800-457-4652 Made in CHINA Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179 See our extensive assortment of outdoor living products on-line at and 4