George Braswell Deburring Department

731 views

Published on

Deburring is the process of smoothing the rough edges or ridges on a machined part.
At George Braswell's Command Tech deburring is done on aluminum, steel, plastics and other materials. There is a certain finesse that a good deburrer acquires.

Published in: Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
731
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

George Braswell Deburring Department

  1. 1. Command Technology, Inc. Phone: 410-360-2920
  2. 2. Deburring Deburring is the process of smoothing the rough edges or ridges on a machined part.
  3. 3. Command Tech Deburring
  4. 4. Materials At Command Tech deburring is done on aluminum, steel, plastics and other materials. Deburring can also be done on additional types of metals, wood, cardboard and more materials for other uses. Any piece or part that is made by machining can benefit from deburring.
  5. 5. Examples If you have ever nicked yourself when drinking from a plastic cup that had a rough edge, felt a rough edge on a toy or felt the rough edge of a freshly clipped fingernail you can understand why sharp edges and ridges should be removed. Sharp edges on a machined part cause the same effect.
  6. 6. Dangers Additionally these pieces have the potential to fall off when the part is in use. When critical machined parts are in use these sharp pieces can fall off and short out electronics that control aircraft, helicopters or missiles if not removed.
  7. 7. Deburring Department The deburring department use files, sharpened files, deburring tools, sand paper, Dremel tools, and tumbling. Some deburring can be done on the CNC machines.
  8. 8. Deburring Department Employees Employees must be properly trained to handle sharp parts in order to avoid injury while deburring. They must learn the difference between deburring properly and destroying a part. Improper deburring leads to parts that must be scrapped and can not be sold which is very costly for the company.
  9. 9. Specs All manufacturing parts have a specific finish call out on the blueprints. Deburring must be able to debur a part without damaging the finish on the part. There is a certain finesse that a good deburrer acquires.
  10. 10. Command Tech Deburring
  11. 11. Command Tech Deburring
  12. 12. George Braswell, President
  13. 13. Command Technology, Inc. 7604 Energy Pkwy. Curtis Bay, MD 21226 Phone: 410-360-2920

×