Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

User's Guide

374 views

Published on

  • Be the first to comment

  • Be the first to like this

User's Guide

  1. 1. 12 In 1 USB Flash Memory Reader/Writer Quick Start Guide
  2. 2. Table of Contents 1. Before installing the driver 2. Windows 98 / Windows 98 SE driver installation 3. Windows 2000 (sp 3 –4) ME / XP driver installation 4. Inserting Your Flash Cards 5. Mac driver installation 5.1 Replace / Remove driver
  3. 3. 1. Before installing the driver (a) Please close any open programs before installing the driver or reader. (b) If you are using Windows 98 and have plugged in the Viking InterWorks IntelliFlash USB Flash Memory Reader/Writer before running the driver setup procedure, you will see the following screen appear. Just click “CANCEL” to exit and then follow the installation instructions.
  4. 4. 2. Windows 98 / Windows 98 SE Installation (1) Insert the CD-Rom and go to your CD-Rom Drive in “My Computer”. Go to the “Multiflash Setup” driver folder and in the folder you will find “Windows 98SE & Windows 2000 (SP3 & SP4) & Windows ME & Windows XP”. Double click the folder to open it. (2) Execute “Setup.exe” by double clicking on the Icon.
  5. 5. 3) Click “Next” to continue. (4) The driver files will be copied to your Windows operating system. Click “OK” to restart when copying is completed.
  6. 6. (5) Insert the Viking InterWorks IntelliFlash USB Flash Memory Reader/Writer into the USB port on your computer. Windows will automatically detect new hardware. In ‘My Computer’ you should find “Removable Disk” drives.
  7. 7. 3. Windows 2000 (sp 3 – 4)/ME / XP Installation (1) There is no need to install drivers for Windows 2000 (sp 3 –4)/ME/XP. These Windows operating systems have built-in drivers to support the Viking InterWorks IntelliFlash USB Flash Memory Reader/Writer. Simply plug in the Viking InterWorks IntelliFlash USB Flash Memory Reader/Writer into the USB port. Windows will automatically detect and install the device. In ‘My Computer’ you should find “Removable Disk” drives. NOTE: If you have problem seeing these icons, please press “F5” to refresh the screen.
  8. 8. 4. Inserting Your Flash Cards Slot 1 Slot 2 Slot 3 Slot 4 Your Viking InterWorks IntelliFlash USB Flash Memory Reader/Writer is compatible with up to 12 different types of Flash Memory with adapters. Slot 1 : Memory Stick/Memory Stick PRO/Memory Stick Duo*/ Memory Stick PRO Duo* Slot 2 : CompactFlash I/CompactFlash II/MicroDrive Slot 3**: Secure Digital/MultiMedia/Reduced Size MultiMedia*/Mini Secure Digital* Slot 4**: SmartMedia Card *Requires adapter provided by flash media manufacturer **NOTE : Cards must be inserted with label facing down in slots 3 and 4 to function properly.
  9. 9. 5. Mac 8.6 ~ 9.x Installation This Mac driver is for OS 8.6 to 9.x only. Step 1: Use the CD provided, go to the driver folder and in the Mac folder you will find “M5635_MacDriver_090b.sit”. Double click and save it to your desktop. If successful, you should see a folder on your desktop (as shown below). Step 2: Open your distribution disk and drag the USBCardReaderShim and the USBCardReaderDriver file into //system folder/extensions (as shown below). Then restart your system
  10. 10. Step 3: Plug in the Card Reader into the USB port located on the side of the MAC. (Note: the card reader will not work if you plug it into the USB port on the keyboard due to insufficient power) Insert memory card(s) into the card driver to gain access. Step 4: To safely remove the card reader, drag the portable drives icons to the trash icon. 5.1 Replace /Update driver If you have installed the driver once before, dragging the USBCardReaderShim and the USBCardReaderDriver file into //system folder/extensions, you will see the following screen. Select “ok” to replace/update the existing driver or select “cancel” to use the existing driver.

×