Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Digital logic and design's Lab 4 nand

Digital Logic and design's lab 4 NAND

  • Be the first to comment

  • Be the first to like this

Digital logic and design's Lab 4 nand

  1. 1. DLD lab 4 Digital Logic and Design F. Ansari
  2. 2. Lab. No. 5 Objective: To perform operation of NAND gate according to NAND gate truth table using IC 74LS00 Apparatus: 1. IC 74LS00 2. Wires 3. Cutter 4. AM 2001 Trainer Integrated Circuit (IC): AM Trainer 2001: 74LS00
  3. 3. Truth Table of OR gate: Truth table Inputs Output A B C = A . B 0 0 1 0 1 1 1 0 1 1 1 0 Procedure: 1. I took wires and cut them with the help of cutter. 2. I connect the IC on the breadboard. 3. I took a wire (white) and connect it at 7 pin and grounded it. 4. I connect two wires (Orange and blue) at pin 1 and 2 and connected it to switches S2 and S3. 5. Then I connected one end of brown wire with pin 3 to get output and other end with LED (l4) 6. Then we give power supply through pin 14 with the help of another wire (green) which is +5V 7. Now we started giving inputs through switches S2 and S3 respectively. 8. Firstly, we give 1 input to switch S2 and 0 input to switch S3, and as a result we get LED (L4) turn on, which indicates that we get output 1. 9. Secondly, we give 0 input to switch S2 and 1 input to switch S3, and as a result we get LED (L4) turn on, which indicates that we get output 1. 10. Thirdly, we give 1 input to switch S2 as well as 1 input to switch S3, and as a result we get LED (L4) turn on, which indicates that we get output 0. 11. At the end, we give 0 input to switch S2 as well as 0 input to switch S3, and as a result we get LED (L4) remains turn off, which indicates that we get output 1. Result: Hence I verified the truth table of NAND gate using IC 74LS00.

×