02 b pcam dcva specification sheet


Published on

  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

02 b pcam dcva specification sheet

  1. 1. MotionViewerTM camera DCVA P R O D U C T S P E C I F I C A T I O N S S H E E T Made by RSI VIDEO TECHNOLOGIES 2202b May 2009Description FeaturesThe MotionViewer TM camera DCVA Pet-Immune, is > S2View® - Spread Spectrum, VIDEOFIED®, Interactive,a battery operated, wireless indoor motion-activated video AES Encrypted Wireless technology provides optimumcamera designed for use in VIDEOFIED® security systems. signal integrity and security.Motion-activated cameras are intended for applications where > Camera - CMOS black and white sensor with 85° wide anglevideo verification of intrusion alarms is necessary or desired. lens and video resolution of 320 x 240 pixels.The DCVA consists of a digital camera, a passive > Night illumination - up to 4.5 m/14 ft. distance using twoinfrared motion detector, and S2VIEW® spread spectrum, infrared LED.VIDEOFIED® interactive, encrypted wireless circuitry for securetwo-way communications with the control panel. The camera > Motion detector - dual-element, passive infrared with fresnelconsists of a CMOS black and white sensor and an 85°, wide lens for 12 m/40 ft. wide, 90° coverage pattern.angle lens. Two infrared LED provide a night illumination > Camera begins filming in under 100 milliseconds afterdistance of approximately 4.5 meters/14 feet. For motion the PIR detects motion.or movement detection, a fresnel lens inside the covercaptures a 12 m/40-ft wide, 90° angle passive infrared pattern. > Supervised - transmits a check-in/status signal everyThe base allows for flat wall or corner mounting. A 8 minutes indicating unique identification code along withdual tamper function provides for both wall and cover the current alarm state, tamper condition, serialtamper detection. number, manufacture date, software revision, and battery status.Pet-immunity allows the camera to be installed in an area wherepets weighing up to 18 kg/40 lbs. may be present. > Dual tamper - provides cover and wall tamper detection.The camera is typically installed to cover entire rooms, hallways, > Lithium batteries - up to four years.and other similar areas where broad viewing/ detection Applicationscoverage is needed. When the alarm system is armed and themotion detector senses motion or movement, the detector > Video verification of intrusion alarms.transmits a signal and activates the camera, which captures a10-second digital video segment.The control panel receives the signal and responds according tosystem configuration/programming.The alarm and video segment are reported via the controlpanel to the central monitoring station, and can also be sent toEmail addresses for viewing.The detector is powered by three lithium batteries that can last upto four years, depending on the amount of detector activity. Thedetector transmits a check-in signal every eight minutes thatincludes its unique identification code along with the currentdetection sensor state, tamper condition, serial number, date ofmanufacture, software revision, and battery status. DCVA means DCVA600 for USA/Canada, DCVA700 for Australia/www.videofied.com Singapore and DCVA200 for Europe and rest of the world.
  2. 2. MotionViewerTM DCVA TECHNICAL SPECIFICATIO NSElectrical Data Physical DataPower requirements Three 3.6 V batteries Material ABS—ULV0Battery type Lithium, LS14500 Dimensions 89 mm x 70 mm x 70 mmBattery life Up to 4 years (LxWxD): 3-1/2 in. x 2-3/4 in. x 2-3/4 in.RF technology S2View® Weight: 150 g/5.3 oz. (without batteries)Radio type Spread Spectrum Bidirectional RFOperating frequency 868/915/920 MHz Installation/MountingTransmission security AES algorithm encryption Camera/Base One screw secures camera to base;Supervision Polled signal every 8 minutes two screws secure camera base to mountingAntenna Integrated surface, flat or corner mount.Tamper detection Wall and cover tampered Mounting Height 2.1 m/6.9 ft.Camera sensor type CMOS black and whiteCamera resolution 320 x 240 pixelsCamera sensitivity 0.2 luxCamera lens Wide angle 85°Camera response Less than 100 milliseconds after PIR detectionVideo sequence in intrusion 5 frames/s for 10 seconds DCVA means DCVA600 for USA/Canada, DCVA700 for Australia/Night illumination 2 infrared LED Singapore and DCVA200 for Europe and rest of the world.Night illumination switching AutomaticNight illumination distance 4.5 m/14 ft.Motion detector technology Passive infrared DSPMotion detector type Dual elementMotion Lens FresnelMotion Detection angle 90°Motion Detection distance 12 m/40 ft.Motion Detection pattern 24 facets: 9 main–12 m/40 ft. 8 intermediate–8 m/26 ft. 5 short–4 m/13 ft. 2 creep zones–1.2 m/4 ft.Operating temperature 0°/+40°C (32°/104°F)Maximum relative humidity 70%, non-condensingApprovals CE / EN50131 / EN300220 / IDA / NCP (DCVA200) FCC (DCVA600) A-Tick (DCVA700) EMEA SALES North American Headquarters 2, rue Alexis de Tocqueville 4455 White Bear Parkway, Suite 700 92160 ANTONY White Bear Lake, MN 55110 FRANCE USA Phone +33 (0)1 55 59 10 25 Phone 877-206-5800 Fax +33 (0)3 90 20 66 36 Fax 651-762-4693 www.videofied.com © 2009 RSI VIDEO TECHNOLOGIES. VIDEOFIED ® is a Registered Trademark of RSI VIDEO TECHNOLOGIES. S2View ® is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without notice.