MotionViewerTM camera                                                                                                    D...
MotionViewerTM DCV                                                        TECHNICAL                               SPECIFIC...
Upcoming SlideShare
Loading in …5
×

02 a pcam dcv specification sheet

419 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
419
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

02 a pcam dcv specification sheet

  1. 1. MotionViewerTM camera DCV P R O D U C T S P E C I F I C A T I O N S S H E E T Made by RSI VIDEO TECHNOLOGIES 2202a May 2009Description FeaturesThe MotionViewer DCV is a battery operated, wireless TM > S2View ® - Spread Spectrum, VIDEOFIED®, Interactive, AESindoor motion-activated video camera designed for use in Encrypted Wireless technology provides optimum signalVIDEOFIED® security systems. Motion-activated cameras are integrity and security.intended for applications where video verification of intrusion > Camera - CMOS black and white sensor with 85° wide anglealarms is necessary or desired. lens and video resolution of 320 x 240 pixels.The DCV consists of a digital camera, a passive infrared motion > Night illumination - up to 4.5 m/14 ft. distance using twodetector, and S2 VIEW® spread spectrum, videofied interactive, infrared LED.encrypted wireless circuitry for secure two-way communicationswith the control panel. The camera consists of a CMOS black > Motion detector - dual-element, passive infrared with fresneland white sensor and an 85°, wide angle lens. Two infrared lens for 12 m/ 40 ft. wide, 90° coverage pattern.LEDs provide a night illumination distance of approximately 4.5 > Camera begins filming in under 100 milliseconds aftermeters/14 feet. For motion or movement detection, a fresnel lens the PIR detects motion.inside the cover captures a 12 meters/ 40-foot wide, 90° anglepassive infrared pattern. The base allows for corner mounting. > Supervised - transmits a check-in/status signal everyA dual tamper function provides for both wall and cover tamper 8 minutes indicating unique identification code along withdetection . the current detection sensor state, tamper condition, serial number, manufacture date, software revision, andThe camera is typically installed to cover entire rooms, battery status.hallways, stairwells, and other similar areas where broadviewing/detection coverage is needed. When the alarm system > Dual tamper - provides cover and wall tamper detection.is armed and the motion detector senses motion or movement, > Lithium batteries - up to four years.the detector transmits a signal and activates the camera, whichcaptures a 10-second digital video segment. The control Applicationspanel receives the signal and responds according to system > Video verification of intrusion alarms.configuration/programming.The alarm and video segment are reported via the controlpanel to the central monitoring station, and can also be sent toEmail addresses for viewing. The detector is powered by threelithium batteries that can last up to four years, depending on theamount of detector activity.The detector transmits a check-in signal every eightminutes that includes its unique identification code alongwith the current detection sensor state, tamper condition,serial number, date of manufacture, software revision,and battery status. DCV means DCV600 for USA/Canada, DCV700 for Australia/Singaporewww.videofied.com and DCV200 for Europe and rest of the world.
  2. 2. MotionViewerTM DCV TECHNICAL SPECIFICATIO NSElectrical Data Physical DataPower requirements Three 3.6 V batteries Material ABS—ULV0Battery type Lithium, LS14500 Dimensions 89 mm x 70 mm x 70 mmBattery life Up to 4 years (LxWxD): 3-1/2 in. x 2-3/4 in. x 2-3/4 in.RF technology S2View® Weight 150 g/5.3 oz. (without batteries)Radio type Spread Spectrum Bidirectional RFOperating frequency 868/915/920 MHz Installation/MountingTransmission security AES algorithm encryption Camera/Base One screw secures camera to base;Supervision Polled signal every 8 minutes two screws secure camera base toAntenna Integrated mounting surface, or corner mount.Tamper detection Wall and cover tampered Mounting Height 2.1 to 2.3 m (6.9 to 7.5 ft.)Camera sensor type CMOS black and whiteCamera resolution 320 x 240 pixelsCamera sensitivity 0.2 luxCamera lens Wide angle 85°Camera response Less than 100 milliseconds after PIR detectionVideo sequence in intrusion 5 frames/s for 10 seconds DCV means DCV600 for USA/Canada, DCV700 for Australia/SingaporeNight illumination 2 infrared LED and DCV200 for Europe and rest of the world.Night illumination switching AutomaticNight illumination distance 4.5 m/14 ft.Motion detector technology Passive infraredMotion detector type Dual elementMotion Lens FresnelMotion Detection angle 90°Motion Detection distance 40 ft./12 mMotion Detection pattern 24 facets 9 main–12 m/ 40 ft. 8 intermediate–8 m/ 26 ft. 5 short–4 m/13 ft. 2 creep zones–1.2 m/4 ft.Operating temperature 0°/+40°C (32°/104°F)Maximum relative humidity 70%, non-condensingApprovals CE / EN50131 / EN300220 / INCERT/ IDA / NCP (DCV200) FCC (DCV600) A-Tick (DCV700) EMEA SALES North American Headquarters 2, rue Alexis de Tocqueville 4455 White Bear Parkway, Suite 700 92160 ANTONY White Bear Lake, MN 55110 FRANCE USA Phone +33 (0)1 55 59 10 25 Phone 877-206-5800 Fax +33 (0)3 90 20 66 36 Fax 651-762-4693 www.videofied.com © 2009 RSI VIDEO TECHNOLOGIES. VIDEOFIED® is a Registered Trademark of RSI VIDEO TECHNOLOGIES. S2View ® is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without notice.

×