Enco HOTdeals July 2013 Catalog

1,696 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,696
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Enco HOTdeals July 2013 Catalog

  1. 1. 01-72 CP 13-07 CustomerProspect Cover.indd 201-72 CP 13-07 CustomerProspect Cover.indd 2 6/19/13 10:05 AM6/19/13 10:05 AM
  2. 2. PHONE: 800-USE-ENCO (800-873-3626) QUICK INDEX IT’S IN STOCK AND READY TO SHIP! • 99% In-Stock Inventory! • All in-stock orders ship within one business day. Ask your sales associate for details SHIPPING DETAILS Our primary shipping method for orders weighing less than 125 lbs. is UPS Ground. Some items weighing less than 125 lbs. must be shipped truck due to size or fragility. DOT regulated items cannot be shipped via air. Alaska, Hawaii and Puerto Rico customers - Air shipments only. “Free Shipping” applies to select items that are identified in a current Enco catalog. “Free Shipping” means standard ground (small parcel or truck) shipment to a location within the continental U.S. only. Lift gate and other non-standard services will incur an additional charge; call for details. Enco does not accept C.O.D. payment for any order. Residential deliveries will incur a $1.15 surcharge. Rural deliveries will incur a $1.75 surcharge. RETURNS You may return an item for credit within 30 days of shipment, provided it is unused and in resalable condition, found to be defective, or not specifically restricted from returns. Call Enco at 800-USE-ENCO to obtain a Return Authorization (RA) number. No returns will be accepted without an RA number. Machinery will be repaired or replaced at Enco’s discretion and according to our Machinery Warranty; ask for details before purchasing. All prices are subject to change without notice. Pricing, photographic and typographical errors are subject to corrections. For complete Terms of Sale, see the current Enco Master Catalog, visit use-enco.com, or call 800-USE-ENCO. OUR TERMS OF SALE WE WILL BEAT ANY ADVERTISED PRICE! If you find a lower advertised price on any item we sell, just send us a copy of the ad and Enco will meet it and beat it by 5%!* *Some limitations apply. Please call for details. Abrasives............................52-55 Books & Reference....................63 Cutting Tools .......................26-41 Fluids ................................56-57 Hand & Power Tools...............68-71 Machine Tool Accessories ........ 4-14 Machinery...........................15-25 Material Handling & Storage ....60-62 Measuring Tools ...................42-51 Raw Materials......................58-59 Shop Supplies ......................64-67 FOR FREE UPS SHIPPING ON YOUR ORDER OF $99 OR MORE: By Phone: Give the promo code to your friendly Enco Sales Associate. Online: Enter the promo code on the shopping cart page and click apply. HURRY! Expires July 31, 2013 *Valid only on orders shipped within the contiguous 48 United States. Offer only applies to Standard UPS Ground Shipping Service. 125 lb. weight limit. Cannot be combined with any other offer. We understand that you have many options in the marketplace, and are pleased that you have made Enco your premier choice for Industrial Tools. We want you to know that we truly value your business. Please enjoy Free UPS Shipping on all orders of $99 or more! USE PROMO CODE: PRSJUL FREE UPS Shipping on Orders of $99 or More! Price Each Case Model # LessThan Case Size Qty. Fruit Punch Lemon-Lime Orange Glacier Freeze RipTide Rush Case Qty. Instant Powder 8.5 oz. 40 RB890-7131 RB505-4175 RB505-4176 — RB319-5272 $1.99 $1.59 21 32 RB890-7133 RB505-4179 RB505-4180 RB319-5279 RB319-5280 4.26 3.39 51 14 RB890-7142 RB890-7140 RB890-7141 RB319-5282 RB319-5281 9.38 7.49 Wide-Mouth Bottles 20 24 RB319-5275 RB319-5277 RB319-5276 — — 1.72 1.39 Instant Thirst Quenchers Provides Rapid Rehydration Instant Powder Mixes • 8.5 oz. yields 1 gallon • 21 oz. yields 2.5 gallons • 51 oz. yields 6 gallons Instant Mixes As Low As $ 159Each in Case Qty. • Rolls easily on two 5" wheels • Head tilts 360° • 3-speed, rotary switch, 1-phase, 120v, 1⁄8 hp, sleeve-bearing, permanently lubricated, totally enclosed motor • 10' cord • 53" overall height • Steel hub/spider and aluminum blades • Double-locking, chrome-plated guards • 1-year warranty Roll-About Floor Fans Blade cfm Wt. Reg. Sale Size Hi/Med./Low Lbs. Model # Price Price 18" 5750/4700/3200 27 RB325-7337 $170.55 $109.00 24 6350/5200/3600 30 RB325-7357 219.93 155.00 Starting At $ 109 SAVEUP TO 36% FREE PLUS • Durable steel construction provides high-volume air movement and powerful air delivery • Sensitive cutoff protects from overheating • Easy to install • Balanced blades for smooth, quiet operation • 120V Blade Max. Low Size HP CFM RPM Model # Price 20" 1⁄3 6,039 1,500 RB411-0119 $85.95 24 1⁄3 7,530 1,630 RB411-0118 125.95 30 1⁄4 6,145 1,050 RB411-0117 155.95 As Low As $ 8595 FREE PLUS Light-Duty 3-Speed Wall-Mounted Fans Ideal for Industrial Use FOR FREE UPS SHIPPING ON YOUR ORDER OF $99 OR MORE: By Phone: Give the promo code to your friendly Enco Sales Associate. Online: Enter the promo code on the shopping cart page and click apply.k HURRY! Expires July 31, 2013 *Valid only on orders shipped within the contiguous 48 United States. Offer only applies to Standard UPS Ground Shipping Service. 125 lb. weight limit. Cannot be combined with any other offer. We understand that you have many options in the marketplace, and are pleased that you have made Enco your premier choice for Industrial Tools. We want you to know that we truly value your business. Please enjoy Free UPS Shipping on all orders of $99 or more! USE PROMO CODE: PRSJUL UPS Shipping on Orders of $99 or More! FOR FREE UPS SHIPPING ON YOUR ORDER OF $25 OR MORE: By Phone: Give the promo code to your friendly Enco Sales Associate. Online: Enter the promo code on the shopping cart page and click apply. HURRY! Expires July 31, 2013 *Valid only on orders shipped within the contiguous 48 United States. Offer only applies to Standard UPS Ground Shipping Service. 125 lb. weight limit. Cannot be combined with any other offer. We understand that you have many options in the marketplace, and are pleased that you have made Enco your premier choice for Industrial Tools. We want you to know that we truly value your business. Please enjoy Free UPS Shipping on all orders of $25 or more! USE PROMO CODE: PRSJUL FREE UPS Shipping on Orders of $25 or More! 02-03 CP 13-07 CustomerProspect.indd 102-03 CP 13-07 CustomerProspect.indd 1 6/19/13 10:14 AM6/19/13 10:14 AM
  3. 3. 3INTERNET: use-enco.com FAX: 800-965-5857 Cool Savings On Hot Deals Portable Water Coolers • OSHA compliant • UV- and impact-resistant HDPE exteriors • FDA grade, stain-resistant, easy cleaning liners • Flow spout Reg. Sale Cap. Model # Price Price 2 gal. RB505-4183 $30.74 $26.95 3 RB505-4184 40.17 35.95 5 RB505-4185 46.04 40.95 10 RB505-4186 73.31 65.95 As Low As $ 2695 62 MAX Infrared Thermometer • IP54 rated for dust and water resistance • 3-meter (9.8') drop tested • Large, backlit display • Min./Max./Avg./Dif. • Hi and Lo alarms • Temperature range: -30˚ to 500˚C (-22˚ to 932˚F) • Response time: <500 ms (95% of reading) • Optical resolution: 10:1 (calculated at 90% energy) • Display resolution: 0.1˚C (0.2˚F) • Repeatability of readings • Powered by a single AA battery (10-hour life with laser and backlight on) Single Laser, 10:1 Spot Low Price Model # RB411-0124 $ 9595 Commercial Light-Duty Portable Blowers • Steel housing with spiral-wire front and rear guards • 2-speed, 115V, 1 ph. motor • Permanently lubricated, permanent split capacitor • 10' SJT-type, 3-conductor power cord • Belt drive: 8" wheels; direct drive: 6" wheels *Swivel model Blade Low Size HP Amps CFM Model # Price Direct Drive 30" 1⁄2 3.3 9,100 RB411-0112* $295.95 36 2⁄3 4.5 11,200 RB411-0115 309.00 42 1 5.8 16,800 RB411-0113 395.00 Belt Drive 36 3⁄4 5 11,200 RB411-0110 395.00 42 1 6.5 17,600 RB411-0114 475.00 48 11⁄2 9 19,500 RB411-0111 575.00 Direct Drive Swivel Model Belt Drive Model Starting At $ 29595 FREE PLUS Pivoting Floor & Table Fans • 3 speeds • 120V, 1 ph. motor • Permanently lubricated • ETL listed • 7' cord length • Table/Wall Fans: Base is suitable for table, floor or wall mount Blade Mfr’s Low Size CFM No Model # Price OscillatingTable/Wall Fans 12" 930/780/620 3150G RB411-0120 $45.95 16 1392/1302/1142 3151G RB411-0121 50.00 Floor Fan 14 1650/1470/1180 9214GT RB411-0122* 85.95 *9' cord length Floor Fan Table Fan Starting At $ 4595 FREE PLUS Industrial Floor Fans • 3-speed, 1-phase, 120V motor • 10' long, SJT-type, 3-conductor cord • All-metal construction • Chrome-plated, double-locking steel wire guards • Fan rotates 360° for multi-directional use Blade Low Size HP CFM Model # Price 12" 1⁄12 1600/2200/2750 RB890-9977 $75.99 18 1⁄8 3200/4700/5750 RB890-9978 85.99 24 1⁄8 3600/5200/6350 RB890-9979 139.99 1-YEAR LIMITED WARRANTYFREE PLUS Starting At $ 7599 02-03 CP 13-07 CustomerProspect.indd 202-03 CP 13-07 CustomerProspect.indd 2 6/19/13 10:14 AM6/19/13 10:14 AM
  4. 4. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE4 Easy, Secure ShoppingVises & Clamps Multi-Purpose Mechanic’s Vises • Versatile, reversible front jaw • 360° swivel base with two lockdowns • Replaceable, hardened steel top jaws —serrated and reversible to smooth • Replaceable, hardened steel serrated pipe jaws are removable and designed to securely grip pipe Jaw Jaw Throat Pipe Wt. Low Opening W Depth Capacity Lbs. Model # Price 6" 51⁄2" 33⁄4" 1⁄8-3" 50 RB404-1725 $118.95 11 61⁄2 4 1⁄8-31⁄2 53 RB404-1726 235.95 13 8 43⁄4 1⁄8-31⁄2 77 RB404-1727 335.95 As Low As $ 11895 • Designed for medium- to high-volume CNC production • Reversible jaws can be changed from standard to step • Anti-tilt mechanism eliminates lift of movable jaw • Vise body is precision ground and the height matched within +0 • Ductile cast-iron body, hardened upper guide surface improves rigidity and wear resistance • 6" jaw width • 4" jaw opening • 5" OAH • 24" OAL • 11⁄2" jaw height • Wt.: 110 lbs. Double Direction Precision Machine Vise p SAVE 40% Sale Price Model # RB327-5889 $ 24995 Regular Price: $423.23 Swivel Base Vises Bench Vise • 51⁄4" jaw opening • 5" jaw width • 183⁄4" OAL • 85⁄8" height • 3⁄8" minimum pipe capacity Mfr’s # 69999 Multi-Purpose Mechanic’s Vises • Heavy duty – 30,000 psi rated • Hardened steel top and pipe jaws • Large anvil work surface • Swivel bar rotates 360° and has double lockdown for maximum stability • Powder coat paint resists scratches Jaw Jaw Throat Capacity Wt. Reg. Sale Open. W Depth Min – Max. Lbs. Mfr’s # Model # Price Price 41⁄2" 4" 37⁄16" 1⁄4 – 2" 38 744 RB319-3258 $163.24 $105.95 51⁄4 5 33⁄4 1⁄4 – 21⁄2 52 745 RB319-3256 276.81 189.00 53⁄4 6 41⁄8 1⁄4 – 31⁄2 64 746 RB319-3259 327.10 245.95 6 51⁄2 33⁄4 1⁄8 – 3 50 14500 RB240-2993 181.53 169.00 81⁄4 8 43⁄4 1⁄4 – 31⁄2 89 748A RB319-3257 623.48 369.00 Industrial Vises Jaw Jaw Capacity Wt. Reg. Sale Open. W Min – Max. Lbs. Mfr’s # Model # Price Price Utility 4" 41⁄2" 1⁄8 – 2" 16 674 RB240-2982 $85.41 $68.95 5 51⁄2 1⁄8 – 21⁄2 35 675 RB426-1020 119.92 85.95 51⁄2 61⁄2 1⁄8 – 21⁄2 44 676 RB426-1022 150.12 85.95 6 6 1⁄8 – 3 66 656HD RB426-1024 255.78 165.95 71⁄2 8 1⁄8 – 3 80 648HD RB426-1026 318.35 215.00 Tradesman 4 41⁄2 1⁄4 – 21⁄2 42 63199 RB426-1010 439.76 349.00 5 51⁄2 3⁄8 – 3 53 1755 RB426-1012 554.58 429.00 61⁄2 61⁄2 3⁄8 – 31⁄2 72 1765 RB426-1014 710.55 459.00 7 8 1⁄8 – 31⁄2 109 1780A RB240-2981 912.02 689.00 Utility Tradesman Sale Price Model # RB405-0705 $ 149Regular Price: $256.57 Starting At $ 10595 Starting At $ 6895Tradesman Vises • 60,000 psi ductile iron body parts • Hardened steel top and pipe jaws • Round, lathe-turned slide bar • Precision thrust bearing Utility Workshop Vises • Serrated steel replaceable top jaws • Built-in pipe jaws • Large anvil • Finished in red enamel Jaw Jaw Jaw Wt. Reg. Sale W Open. Depth Ht. Lbs. Model # Price Price 3" 23⁄4" 1" 43⁄4" 12.6 RB404-1676 $74.19 $49.00 4 31⁄2 1.188 5 17.9 RB404-1677 84.22 62.00 5 55⁄16 15⁄16 55⁄16 23.8 RB404-1678 120.39 85.00 6 53⁄4 11⁄2 61⁄4 36.8 RB404-1679 151.90 112.00 • Used where quick and precise X and Y axis positioning is required • Often used on a drill press to recreate lateral and cross travel of a milling machine • Suitable for clamping soft materials like wood, aluminum and copper • Ball-crank handles • Three bolt legs on each side of the base to match most table configurations As Low As $ 49 Cross Slide Vises Quick-Release Welding Clamps SAVEUP TO 30% For quick clamping, without spinning. Ideal for a wide range of welding and woodworking applications, including inside clamping, clamping of unparallel parts or holding round or odd-shaped parts. Import • Material: Steel • Straight handle • Non-marring pads and cushion handle grip • Press button, slide clamp to desired position, release button and turn handle to right to tighten clamp jaws • Load capacity: 200 lbs. Gibraltar • Material: Black oxide finish with copper- plated spindle • Resists welding splatter • T handle • Lift release lever and pull handle to open jaws • Push handle to desired position and flip release lever down to tighten clamp jaws • Load capacity: 1,000 lbs. Open Closed Max. Throat Throat Reg. Sale Cap. OAL Depth Depth Model # Price Price Import 5" 12" 21⁄2" 31⁄2" RB308-0336 $19.20 $15.95 61⁄2 131⁄2 21⁄2 4 RB308-0337 22.79 19.95 Gibraltar 5 10 21⁄4 3 RB327-0066 23.03 15.95 61⁄2 111⁄2 21⁄4 31⁄2 RB327-0067 27.38 21.49 T handleStraight handle 04-05 EH 13-07 V&C.indd 404-05 EH 13-07 V&C.indd 4 6/19/13 10:21 AM6/19/13 10:21 AM
  5. 5. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 5 Online at use-enco.com Vises & Clamps Reg. Sale W JawW Ht. Model # Price Price 1" 3⁄8-3⁄4" .38" RB328-0106 $18.22 $10.95 11⁄2 1⁄2-7⁄8 .50 RB328-0107 18.22 10.95 Machine Vise Work Stops • Fits various brands of machine vises • Steel body with 2 guide pins • Spring-loaded work-stop clamp for vises with a minimum protrusion of 1⁄16" Your Choice $ 1095 SAVE 39% SAVEUP TO 32% Milling Machine Vises • 6" vise: bed height matched to size 2.875" ±.0005" • 8" vise: bed height matched to size 3.310" ±.0005" • Rigid main screw design allows for higher torque loads and clamping force • Repeatability within .001" • Hardened vise bed and jaw plate • Limited lifetime warranty Vise Jaw Jaw Jaw Max. Clamp. Wt. Mfr’s Sale Size Width Ht. Opening W Ht. OAL Force Lbs. Model # List Price 6" 6" 1.75" 9" 83⁄4" 4.62" 17.2" 8200 lbs. 75 RB308-0101 $485.00 $395.00 8 8 2.20 11 111⁄2 5.51 21.81 12,000 210 RB328-0172 1,465.00 989.95 Starting At $ 395 SAVEUP TO 39% Angle Vise Precision Ground Drill Press Vises Can be used in four positions, horizontal, left side, right side and on end. All sides ground at 90˚ to adjacent side. • Removable jaw inserts • Jaws include horizontal and vertical “V” grooves for holding rounds • Holds irregularly shaped materials easily without special fixtures • Heavy cast construction Throat Jaw Jaw Approx. Mfr’s Sale Depth W Open. OAL Wt. Model # List Price GroundVises 11⁄2" 21⁄2" 29⁄16" 7" 6 lbs. RB891-5993 $92.00 $55.95 13⁄4 3 31⁄8 8 10 RB891-5994 100.00 69.95 AngleVise 11⁄2 21⁄2 21⁄2 8 12 RB240-2902 100.00 75.95 Ground Vise Starting At $ 5595 Deep Throat Forged C-Clamps With Perma Pads® • Drop-forged steel frame with extra-deep throat for maximum clearance • Acme roll-threaded screws for maximum strength Nom. Throat Clamp. Screw Mfr’s Sale Cap. D Pres. Dia. Model # List Price 0-21⁄8" 21⁄4" 3500 lbs. 9⁄16" RB337-1042 $18.00 $12.95 0-3 21⁄2 3500 9⁄16 RB337-1043 24.00 14.95 0-41⁄2 31⁄4 6200 3⁄4 RB240-0770 36.00 19.95 0-61⁄16 41⁄8 6600 3⁄4 RB240-0771 54.00 29.95 0-81⁄2 5 6900 3⁄4 RB240-0772 68.00 39.95 2-101⁄8 6 8000 3⁄4 RB337-1044 96.00 54.95 2-121⁄4 65⁄16 9300 7⁄8 RB337-1045 152.00 79.95 Starting At $ 1295 SAVEUP TO 47% JointMaster TM Angle Joining Tools Ideal for Quick Hold & Release on Wood, Metal or Synthetic Materials 90° Fixed Angle • Retractable plate for edge alignment • V-grooves for securely holding round pieces • Ideal for holding two pieces of different thicknesses that require individual adjustments 90° Fixed Angle 30°-275° Adjustable Angle Throat Max. Reg. Sale Depth Cap. Model # Price Price 90° Fixed Angle 2" 11⁄2" RB328-2124 $35.74 $26.95 3 3 RB328-2125 42.47 31.95 30°- 275° Angle 2 11⁄2 RB328-2122 38.55 28.95 3 3 RB328-2123 45.26 34.95 As Low As $ 2695 SAVEUP TO 24%30°-275° Adjustable Angle • Simply adjust to the desired angle, and “lock” into position using the handle • Join round or flat workpieces, or materials with different thicknesses Lock-Down Design Assures the Movable Jaw Won’t Lift! FREE PLUS AngLock® Vises D-688 Mfr’s # D-688 • Up to 7,968 lbs. clamping force • Vise nut does not extend beyond the end of the vise body • Hardened vise bed and jaw plates, and a semi-hard steel screw • 80,000 psi ductile-iron body Mfr’s # D-810 • Up to 11,596 lbs. clamping force • Stationary jaw has a top-down, four-bolt design that reduces vibration by 25%. Total disassembly of the vise allowed, without having to remove the body from the machine table D-810 Jaw Jaw Wt. Reg. Sale W Opening OAL Lbs. Mfr’s # Model # Price Price 6" 8.8" 18.74" 78 D-688 RB990-1019 $567.94 $529.00 8 10 24.185 158 D-810 RB425-7682 1,541.84 1,439.00 Lifetime warranty against manufacturer’s defects Simply text Encotools and your email address to 77053 to sign up for Special Offers. Msg & Data rates may apply. Email subscription only. Text to Join To: 77053 Encotools your email address 04-05 EH 13-07 V&C.indd 504-05 EH 13-07 V&C.indd 5 6/19/13 10:21 AM6/19/13 10:21 AM
  6. 6. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE6 It’s IN STOCK andVises & Clamps The strength of the castings, combined with the precision round slide bar, gives this vise maximum clamping power. Straight line design eliminates wear on the spindle threads, and enclosed design keeps dirt and contaminants out. • 60,000 psi stress parts • Alloy steel slide bar • Hardened steel jaw inserts, replaceable • Hardened milled steel pipe jaws, replaceable Combination Pipe & Bench Vises *Truck Shipment Jaw Max.Jaw Throat PipeCap. Wt. Mfr’s Sale W Open. Depth Min. Max. Lbs. Mfr’s# Model# List Price 31⁄2" 5" 41⁄2" 1⁄8" 21⁄2" 52 C-0 RB404-2719 $880.00 $539.95 41⁄2 6 43⁄4 1⁄8 31⁄2 77 C-1 RB404-2720 1220.00 709.95 5 7 55⁄16 1⁄8 41⁄2 115 C-2 RB404-2721* 1,680.00 999.95 6 9 65⁄8 1⁄4 6 206 C-3 RB404-2722* 2,400.00 1,469.95 SAVEUP TO 40% Cam Action Drill Press Vises • Applies variable clamping force depending on the position of the cam locking lever • Quick jaw positioning using slide bar handle • Machined step jaws • Four mounting locations Jaw Jaw Throat Wt. Mfr’s Sale W Opening D OAL Lbs. Model # List Price 3" 3" 11⁄4" 9" 10 RB240-2899 $200.00 $119.95 4 411⁄16 15⁄16 10 18 RB240-2900 220.00 145.95 6 63⁄16 113⁄16 12 34 RB240-2901 380.00 245.95 8 83⁄16 2 14 51 RB319-3058 480.00 309.95 Max. Max. Jaw Cap. Mfr’s Sale Mfr’s # Opening Lbs. Model # List Price 401 1" 350 RB505-4543 $11.79 $8.39 405 2 800 RB505-4544 14.27 10.99 407 21⁄2 700 RB505-4545* 15.70 11.79 410 3 1500 RB505-4546 20.38 15.99 415 41⁄2 1700 RB505-4547* 21.79 15.99 420 6 2000 RB505-4548 33.23 25.39 421 6 2000 RB505-4549* 36.25 26.99 430 9 2500 RB505-4550 96.25 69.99 435 10 3500 RB505-4551* 135.60 99.99 440 12 6000 RB505-4552 150.51 109.99 • Designed to eliminate distortion and prevent twisting • High-tensile steel • Built-in “V” blocks • Floating jaws stay parallel • Copper-plated handle, jaws, and screw ideal for welding use 6 Pc. Set includes: 2 pieces each of the 21⁄2, 41⁄2 and 6" deep throat sizes. T-Handle Clamps & Set Sale Price Model # RB505-6648 $ 10995 6 Pc. Set SAVEUP TO 28% *Deep throat style 52 Pc. Combination Steel Step Block & Clamp Sets Includes: • 24 Studs: 4 pcs. each: 3, 4, 5, 6, 7 & 8" long • 4 coupling nuts • 6 flange nuts • 6 T-slot nuts • 6 serrated end clamps • 6 step blocks • 1 wall holder • step blocks 1" wide Stud Thread 1-Slot T-Slot Wt. Reg. Sale Size Size NutW Lbs. Model # Price Price 3⁄8"-16 7⁄16" 11⁄16" 18 RB400-2438 $112.64 $65.95 3⁄8-16 1⁄2 7⁄8 23 RB400-2501 102.49 59.95 3⁄8-16 9⁄16 7⁄8 23 RB240-7207 115.69 65.95 1⁄2-13 9⁄16 7⁄8 23 RB400-2562 88.28 55.95 1⁄2-13 5⁄8 1 23 RB505-6544* 84.22 34.95 1⁄2-13 11⁄16 11⁄8 27 RB891-5756 97.42 55.95 5⁄8-11 11⁄16 11⁄8 29 RB400-2688 146.14 85.95 5⁄8-11 3⁄4 11⁄4 29 RB400-2751 147.15 79.95 SAVEUP TO 58% *For Bridgeport -type milling machines 4-in-1 Clamping System Includes Clamp, V-Pad & Extender Block Clamp Clamping Reg. Sale Size Pressure Model # Price Price 61⁄2" 1000 lbs. RB893-2203 $25.52 $19.99 81⁄2 1200 RB893-2151 30.67 21.99 121⁄2 1200 RB893-2152 36.76 28.99 101⁄2 2400 RB893-2153 49.18 37.99 121⁄2 2400 RB893-2154 73.05 57.99 1. Standard—The sliding arm clamp is 10x faster than a C-clamp! 2. Pipe—Add the exclusive V-Pad to create a pipe clamp! 3. Spreader—Slide the clamp arm OFF and reverse to create a spreader clamp. 4. Step-Over—Add the extender block to create a step-over clamp. • Push lever to slide clamping arm on and off • Nickel/chrome-plated, heat-treated alloy steel SAVEUP TO 28% Starting At $ 1999 SAVEUP TO 38% Max. Nominal Load Stud Clamping Limit Reg. Sale Size Range Length Lbs. Model # Price Price Long for Longer Setups 3⁄8" 0-11⁄4" 31⁄2" 10,000 RB505-4639 $32.38 $23.95 1⁄2 0-21⁄2 53⁄4 12,800 RB505-4641 35.29 25.95 5⁄8 0-31⁄2 63⁄4 18,000 RB505-4643 42.82 28.95 3⁄4 0-5 9 24,000 RB505-4645 62.75 42.95 1 0-5 111⁄8 65,000 RB505-4646 103.11 62.95 Short for Closer Setups 3⁄8 0-1 3 14,000 RB505-4638 31.57 23.95 1⁄2 0-13⁄4 41⁄2 16,800 RB505-4640 34.32 25.95 5⁄8 0-23⁄4 51⁄2 24,000 RB505-4642 41.83 28.95 3⁄4 0-31⁄2 7 35,000 RB505-4644 61.75 42.95 Rite-Hite® Hold-Down Clamps • Instant adjustment up to 5" • Self-positioning • For milling, drilling, stamping, etc. • Use on any machine with a “T”-slot As Low As $ 2395 06-07 EH 13-07 V&C_MTA.indd 606-07 EH 13-07 V&C_MTA.indd 6 6/19/13 10:22 AM6/19/13 10:22 AM
  7. 7. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com Machine Tool Accessories 7 READY TO SHIP! 2-Piece Jaw SAVE 21%On Chucks 3-Jaw Plain Back Lathe Chucks • Semi-steel body • Self-centering .003" TIR • Requires backplate (sold separately) Chuck Thru Wt. Reg. Sale Dia. Hole Lbs. Model # Price Price 1-Piece Jaw (Two Sets Included) 4" .860" 8 RB270-4072 $95.43 $81.95 5 1.180 12 RB270-4074 111.35 87.95 6 1.570 20 RB270-4076 133.18 103.95 2-Piece Jaw 10 3.150 55 RB270-4030 223.98 175.95 12 3.930 109 RB270-4035* 328.76 258.95 *Truck shipment 6" Chuck Dia. Backplate 1-Piece Jaw As Low As $ 8195 Chuck Reg. Sale Dia. Spindle Model # Price Price 6" D1-4 RB308-0123 $67.11 $54.95 8 D1-6 RB308-0125 131.84 109.95 10 D1-6 RB308-0126 169.25 133.95 10 D1-8 RB308-0127 179.69 142.95 12 D1-8 RB308-0128 217.58 156.95 Backplates (Some Machining Required) SAVEOVER 15%• Lifting power 14 lbs. (based on 1⁄2" steel) • Trigger-release, hand-operated, 11⁄2" stroke plunger • Handles hard-to-grip metal objects • Easy-to-use, safe and practical time-saving device • High-impact ABS plastic body • Ceramic-type magnet in metal cup housing (permanent power) EZ Grip Magnet Extended Length Sale Price Model # RB891-4092 $ 2495 Regular Price: $30.43 Can be mounted on any flat machine surface or tool crib for collet storage. • Holder rotates with finger touch for easy selection of sizes • Collets are seated firmly in angular pockets without loosening when holder is rotated • Molded of long-lasting A.B.S. plastic • Contains 11 R8 collets: 1⁄8 to 3⁄4" by 16ths SAVE 30% R8 Collet Set with Rotating Holder Sale Price Model # RB891-6076 $ 6595 Regular Price: $94.37 SAVEUP TO 37% Tilting Tables Set work at any angle. • Machined T-slots • Two screws to lock setting • Heavy solid casting • Graduated in degrees • Sliding adjustment ±45° range Overall Wt. Reg. Sale W L Height Lbs. Model # Price Price 5" 7" 33⁄4" 20 RB418-4200 $127.68 $79.95 7 10 5 44 RB418-4202 192.92 129.95 10 15 61⁄2 92 RB418-4204 220.66 209.95 As Low As $ 7995 • 24-position hardened and ground index plate with six masking plates for rapid indexing for divisions of 2, 3, 4, 6, 8 and 12 • 10-second vernier reading • Remove chuck to use as horizontal/vertical rotary table • 360° graduation ring • Includes scroll chuck with faceplate and 2 pc. reversible jaws • Center ht.: 6.100" • Faceplate: 10" • Wt.: 166 lbs. 8" Super Spacer Indexing Accuracy: 3 min.max. Indexing Repeatability: 30 sec. Squareness Base to Chuck: .0012" max. Parall.of Chuck Face to Base: .0008" Concent.of Mounting Flange: .0008" Specifications Sale Price Model # RB202-3030 $ 84995 Regular Price: $1,166.67 R8 End Mill Holders • Sizes 5⁄8" and up for single end mills only • Hardened and groundReg. Sale Bore Model # Price Price 3⁄16" RB210-0102 $26.11 $15.95 3⁄8 RB210-0104 26.11 15.95 1⁄2 RB210-0106 26.11 15.95 5⁄8 RB210-0108 27.11 16.95 3⁄4 RB210-0110 29.09 18.95 1 RB210-0114 31.14 18.95 11⁄4 RB210-0116 41.19 25.95 SAVEUP TO 39% Starting At $ 1595 Specifications Dialperrev.: .100" Travel: 8" longitudinal T-slots: 5⁄8" 5" cross Transverse: 5" Ht.: 41⁄2" Base: 8x9"ovalw/U-slots Table: 51⁄2 x 12" for up to 5⁄8" bolts Wt.: 36 lbs. Compound Slide Milling & Drilling Table • Heavy-duty rugged slide for positioning, milling, drilling, microscope viewing and staging • Adjustable gibs for heavy loads Sale Price Model # RB201-2826 $ 125Regular Price: $215.58 SAVEOVER 40% 06-07 EH 13-07 V&C_MTA.indd 706-07 EH 13-07 V&C_MTA.indd 7 6/19/13 10:23 AM6/19/13 10:23 AM
  8. 8. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE Machine Tool Accessories 8 Over 90,000 PRODUCTS Available Key Jacobs Key Low Size Equivalent Model # Price S2A — RB325-1538 $2.94 S8 K30 RB240-3049 3.07 S9 K32 RB240-3050 2.83 S10 K3 RB240-3053 3.95 S13 K4 RB240-3052 19.17 S14 KG RB325-1450 2.94 S19 KK RB240-3051 3.07 Drill Chuck Keys • Jaw and bodies hardened and ground • One piece gear/scroll ring eliminates loss of clamping torque “T” “A” “D1” “D2” “D3” “D4” “L” “L3” Style Threads Angle Knob Neck Hole Pilot Flange Reg. Sale Dwg. Dia.Pitch Red. Dia. Dia. Dia. Dia. OAL Thick. Model # Price Price BT-30 B M12 x 1.75 45° .428" .271" — .490" 1.699" .19" RB240-3098 $25.74 $12.95 BT-40 A M16 x 2 45 .740 .490 — .669 1.853 .23 RB619-3236 31.05 12.95 B M16 x 2 45 .589 .391 — .669 2.362 .23 RB240-3099 27.26 13.95 CT-40 A 5⁄8"-11 45 .740 .490 .281" .635 1.624 .12 RB308-0525 25.58 12.95 B 5⁄8-11 90 .589 .391 — .635 2.250 .23 RB619-3241 25.99 12.95 B 5⁄8-11 45 .589 .392 — .635 2.250 .24 RB240-3096 25.58 12.95 B 5⁄8-11 45 .589 .392 .200 .635 2.250 .24 RB308-0526 29.36 13.95 B 5⁄8-11 45 .588 .392 — .635 2.450 .24 RB619-3238 27.28 12.95 B 5⁄8-11 45 .589 .391 .635 2.310 .13 RB240-3097 24.94 12.95 C 5⁄8-11 75 .746 .550 .281 .635 2.060 .18 RB308-0527 29.36 12.95 CT-50 A 1-8 45 1.140 .820 .468 1.026 2.540 .20 RB240-3105 21.90 13.95 CNC Toolholder Retention Knobs Style A Style B Retention Knob Safety Retention knobs do not last forever. Your safety program must include retention knob inspections. Knobs must be visually inspected for damage and checked for tightness every time the tool in the holder is changed. SAVEUP TO 58% Style C 3 Pc. Drill Drift Set • Hardened forgings • For removing taper shanks from sleeves or spindles • Morse taper # 1, 2, 3 Low Price Model # RB405-1895 $ 664 Spill Master™ Avoid Messy & Costly Spills Color Model # Red RB891-5999 White RB891-6000 Blue RB825-0000 • Unique design prevents spills — even when turned completely upside down! • Complete with applicator brush Your Choice $ 499 Each Length Ht. Open End Reg. Sale Webbed Reg. Sale W 1st Face 2nd Face Model # Price Price Model # Price Price 3" 21⁄2" 2" — RB418-4510 $13.85 $7.99 31⁄2 3 21⁄2 — RB418-4515 16.73 8.99 41⁄2 31⁄2 3 RB418-4720 $24.87 $13.99 RB418-4520 20.06 10.99 6 5 41⁄2 RB418-4725 40.00 22.99 RB418-4525 30.62 17.99 7 51⁄2 41⁄2 RB418-4730 51.24 29.99 RB418-4530 37.31 21.99 8 6 5 RB418-4735 62.23 35.99 RB418-4535 49.78 28.99 9 7 6 RB418-4740 85.25 49.99 RB418-4540 69.44 40.99 10 8 6 RB418-4745 95.59 55.99 RB418-4545 87.65 50.99 12 9 8 RB418-4750 123.58 72.99 RB418-4550 98.18 57.99 Slotted Angle Plates For setting up jigs and fixtures on milling machines, drill presses, planing machines and radial drilling machines. • Machined both square and parallel • High-tensile, cast-iron construction seasoned against distortion • Webbed end machined on edges and outside surfaces only • Slots are arranged for maximum clamping versatility Open EndWebbed As Low As $ 799 3 Jaw Plain Back Self-Centering Scroll Lathe Chucks Semi-Steel Body Models w/Hardened Solid Jaws include: • Scroll and jaws hardened and ground • Hard top jaws and master jaws • Chuck wrench • Set of mounting screws Models w/Reversible Jaws include: • 2 sets of hard solid jaws for internal and external holding • Balanced scroll jaws made of fine alloy steel Chuck Adapter Required. Chuck Runout Thru Approx. Low Dia. Radial Axial Hole Wt.Lbs. Model # Price Hardened Solid Jaws 3" .0012" .0012" .629" 4 RB328-0327 $180.00 4 .0012 .0012 .866 7 RB328-0408 196.00 5 .0012 .0012 1.181 11 RB328-0410 210.00 6 .0012 .0012 1.575 19 RB328-1316 229.00 8 .0016 .0016 2.559 34 RB328-0426 280.00 10 .0016 .0016 3.149 57 RB328-0427 393.00 Hardened Reversible Jaws 5 .0012 .0012 1.181 12 RB328-0326 252.00 61⁄4 .0012 .0012 1.575 20 RB328-0321 280.00 8 .0016 .0016 2.559 31 RB328-0322 337.00 10 .0016 .0016 3.149 51 RB328-0323 486.00 12 .0024 .0024 3.937 101 RB328-0325 716.00 Starting At $ 180 NEW LOW PRICES 08-09 EH 13-07 MTA.indd 808-09 EH 13-07 MTA.indd 8 6/19/13 10:30 AM6/19/13 10:30 AM
  9. 9. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com Machine Tool Accessories 9 Online at use-enco.com SAVEUP TO 17%• Direct power transmission gear and scroll for accurate, vibration-free work • Hardened and precision-ground bodies and jaws Key-Type Drill Chucks Mount/ Thread Key Mfr’s Sale Capacity Size Size Model # List Price 1⁄64-1⁄4" 1JT S8 RB325-1499 $29.50 $24.99 1⁄32-3⁄8 3⁄8"-24 S8 RB325-1500 34.00 28.99 1⁄16-1⁄2 1⁄2"-20 S9 RB325-1535 43.50 35.99 1⁄32-3⁄8 2JT S9 RB325-1501 40.00 33.99 1⁄16-1⁄2 6JT S9 RB325-1502 43.50 35.99 1⁄16-1⁄2 3⁄8"-24 S9 RB325-1503 43.50 35.99 1⁄16-1⁄2 33JT S9 RB325-1537 43.50 35.99 1⁄16-1⁄2 2JT S9 RB325-1536 42.00 34.99 1⁄32-5⁄8 3JT S10 RB325-1505 63.00 52.99 3⁄16-3⁄4 3JT S13 RB325-1506 102.00 85.99 Made in Germany! Starting At $ 2499 SAVEUP TO 25% Power Reg. Sale Feed Axis Model # Price Price Table x RB404-3045 $399.98 $299.95 Cross Saddle y RB404-3046 455.98 349.95 Knee z RB404-3047 455.98 349.95 Specifications Speed Range: 1-9"/min. RapidTraverse: 40"/min. Gearing: Helical Super Power Feeds For Bridgeport® -Type Milling Machines • 150 lbs. torque • 110v with manual reset • Auto cutoff • Pilot light Starting At $ 29995 SAVE 15% Range Reg. Sale hp Model # Price Price Medium-Duty 1⁄3-3⁄4 RB297-3510 $125.75 $105.95 3⁄4-11⁄2 RB297-3520 137.17 115.95 1-3 RB297-3530 160.04 135.95 3-5 RB297-3540 182.90 154.95 4-8 RB297-3550 217.19 183.95 Heavy-Duty 1⁄3-3⁄4 RB297-3700 160.04 135.95 3⁄4-11⁄2 RB297-3705 182.90 154.95 1-3 RB297-3715 205.77 173.95 3-5 RB297-3725 262.92 222.95 4-8 RB297-3735 308.65 261.95 8-12 RB297-3745 422.96 358.95 12-18 RB297-3755 703.10 596.95 Static Phase Converters Run 3-Phase Equipment From Single-Phase Power • Simple to hook up • Runs at 2⁄3 rated hp • These units are non-returnable. Ask our technical staff for assistance before ordering PHASE-A-MATIC™ As Low As $ 10595 Rating Reg. Sale hp Model # Price Price 1 RB297-3801 $553.85 $525.95 2 RB297-3802 664.62 630.95 3 RB297-3803 775.39 735.95 5 RB297-3805 996.93 946.95 71⁄2 RB297-3807 1,329.24 1,261.95 10 RB297-3809 1,772.32 1,682.95 15 RB297-3811 2,436.94 2,314.95 20 RB297-3813 2,880.02 2,735.95 For Heavily Loaded Applications • Recommended for lathes • Runs at full power • Multi-speed and multi-motor applications • These units are non-returnable; ask our technical staff for assistance before ordering Run 3-Phase Equipment from Single-Phase Power PHASE-A-MATIC™ Rotary Phase Converters 1-YEAR LIMITED WARRANTY Starting At $ 52595 SAVE 22% 5C Spin Indexer (Jig) • Designed to extend the work capabilities of surface grinders, drill presses and all types of milling machines • Accepts 5C collets to 11⁄8" capacity • Indexing plate with precise 36-hole pattern • 10 vernier holes for 1° indexing • Spindle travels 21⁄16" for flute grinding • Hardened and ground spindle with lock • 2-year guarantee Sale Price Model # RB505-2280 $ 8998 Regular Price: $115.72 Dividing spindle concentricity .0004" Cylindrical center bore (per 1") concentricity .0012 Spindle center line parallelism to base .0008 Tolerances SAVEUP TO 15%Qty.: 2+ Enclosed Nominal Avg. Reg. Sale Price Type Width Ht. Pull Lbs. Model # Price 1 2+ Standard 33⁄8" 33⁄8" 55 RB625-0125 $8.96 $7.95 $6.75 Adjustable 61⁄8 33⁄8 110 RB891-4168 17.90 15.79 13.49 Standard HD 33⁄4 43⁄8 75 RB891-5768† 18.31 16.19 13.69 Enclosed 33⁄4 43⁄8 75 RB505-4657*† 21.50 18.99 16.09 Welder’s Magnetic Squares Use for welding, brazing, soldering & assembly • Holds components in position for fast, simple setups • Provides instant 90° or 45° angles • Standard & Adjustable magnets adjust to any angle *Feature weld splatter cover over magnet.†No air shipment • Can also be used in automatic lathes • Overall length: 21⁄2" • Capacity: .010 to .100" • Includes pin chuck with three interchangeable collets Pin Chuck Set Sale Price Model # RB891-5498 $ 995 Regular Price: $16.43 SAVE 39% Milling Machine Vise Work Stops Versatile and quick-mounting work stop permits fast, completely accurate positioning of repetitive work. Fits Reg. Sale Vise Model # Price Price 3 & 4" RB319-9643 $36.52 $29.95 5 & 6 RB891-5935 36.52 32.95 8 RB319-2878 57.83 56.98 As Low As $ 2995 p w Asss SAVEUP TO 18% 08-09 EH 13-07 MTA.indd 908-09 EH 13-07 MTA.indd 9 6/19/13 10:30 AM6/19/13 10:30 AM
  10. 10. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE Machine Tool Accessories 10 The Lowest Prices in the SAVEUP TO 52% • Wedge-type tool posts are precision engineered to ensure repetitive accuracy • Interchangeable with Aloris • Oversized T-nut can be machined to fit any size lathe 6 Pc. Sets include 1 tool post and 5 holders: • Style 1: Boring and facing on piston type, turning and facing on wedge type • Style 2: Boring, turning and facing • Style 4: Boring, heavy-duty • Style 7: Universal parting blade • Style 10: Knurling, facing and turning 6 Pc. Quick Change Tool Post Sets WedgeType Piston Type As Low As $ 18595 Lathe PistonType Reg. Sale WedgeType Reg. Sale Series Swing Model # Price Price Model # Price Price 100 9-12" RB505-2253 $309.50 $187.95 RB890-9636 $383.76 $185.95 200 10-15 RB505-2172 355.62 215.95 RB890-9637 452.39 215.95 300 13-18 RB505-6543 447.90 271.95 RB890-9638 594.51 295.95 400 14-20 — RB890-9639 761.37 425.95 SAVEUP TO 35% Single-Leverage Type • Heavy-duty construction • Front/side gib adjustment • Steel pinions and rams • Four-position anvil • Palmgren includes punch set for specialized pressing Arbor Presses Tons of Max. Wt. Reg. Sale Pressure WorkHt. Lbs. Model # Price Price Enco 1⁄2 41⁄2" 25 RB805-1005 $50.74 $32.95 1 51⁄4 40 RB805-1010 61.31 49.95 3 121⁄2 160 RB805-1030* 159.21 129.95 Palmgren 1⁄2 41⁄2 25 RB890-8802 62.78 49.95 1 51⁄2 32 RB890-8803 86.31 69.95 2 8 68 RB890-8804 172.62 139.95 3 121⁄2 160 RB890-8805* 255.00 203.95 4 153⁄4 225 RB890-8806* 551.19 454.95 *Truck Shipment As Low As $ 3295 R8 Round Collet Sets • Hardened and ground throughout • 7⁄16"-20 drawbar thread Reg. Sale Set Sizes Model # Price Price 6 Pc. 1⁄8-3⁄4" x 8ths RB231-4606 $28.80 $23.95 13 Pc. 1⁄8-7⁄8 x 16ths RB505-5022 115.93 69.95 Starting At $ 2395 SAVEUP TO 39% SAVEUP TO 24% End Mill Gage Shank Nose Line to Mfr’s Sale Dia. Dia. NoseEnd Model # List Price 1⁄8" .69" 1.75" RB240-3014 $132.00 $104.99 1⁄8 .69 2.5 RB240-3015 132.00 104.99 1⁄8 1 3 RB240-3016 144.00 114.99 3⁄16 .69 1.75 RB240-3017 112.00 89.99 3⁄16 .69 2.5 RB240-3018 112.00 89.99 1⁄4 .88 1.75 RB240-3019 112.00 89.99 1⁄4 .88 2.5 RB890-9748 112.00 89.99 1⁄4 1 3 RB240-3020 113.00 89.99 5⁄16 1 2.5 RB240-3021 102.00 79.99 3⁄8 1 1.75 RB240-3022 102.00 79.99 3⁄8 1 2.5 RB307-0770 102.00 79.99 1⁄2 1.75 1.75 RB240-3025 102.00 79.99 1⁄2 1.25 2.62 RB890-9749 102.00 79.99 1⁄2 1.25 4 RB240-3026 112.00 84.99 1⁄2 1.25 6 RB307-3353 132.00 104.99 5⁄8 1.75 1.75 RB240-3027 102.00 79.99 5⁄8 1.5 2.75 RB307-1737 102.00 79.99 3⁄4 1.75 1.75 RB240-3028 102.00 79.99 3⁄4 1.75 3 RB240-3029 102.00 79.99 3⁄4 1.75 3.5 RB307-1738 102.00 79.99 3⁄4 1.75 6 RB307-3354 125.00 99.99 1 2 1.75 RB240-3030 113.00 89.99 1 2 3 RB240-3031 113.00 89.99 1 2 4 RB307-1739 105.00 89.99 11⁄4 2.50 4 RB307-1740 119.00 94.99 V-Flange End Mill Holders Caterpillar #40 • Through-spindle coolant capability • End mill socket TIR .0002" or better to insure best possible cutting tool life • Constructed of alloy steel for long, durable service life • HRC 52-56 • Bright taper with black-oxide finish to prevent corrosion • Meets ANSI specifications As Low As $ 7999 Lathe Packages with Radius Dia. Mode Reg. Sale Travel Model # Price Price 6 x 36" RB319-9604 $1,486.75 $1,189.00 8 x 40 RB319-9614 1,532.35 1,189.00 8 x 60 RB319-9621 1,890.50 1,469.00 8 x 80 RB319-9631 2,247.70 1,649.00 10 x 60 RB319-9622 1,916.15 1,469.00 10 x 80 RB319-9632 2,294.25 1,689.00 12 x 120 RB319-9638 3,225.25 2,289.00 Machine Table Reg. Sale Travel Size Model # Price Price 12 x 24" 8 x 30" RB319-3319 $1,224.55 $979.00 12 x 30 9 x 42 RB319-3309 1,220.75 979.00 12 x 36 9 x 49 RB319-3310 1,220.75 979.00 14 x 32 9 x 42 RB319-3320 1,272.05 979.00 16 x 36 10 x 54 RB319-3313 1,323.35 979.00 18 x 40 11 x 58 RB319-3312 1,323.35 979.00 Digital Readout Systems For Lathes & Mills Packages include: • 20iM digital readout • All mounting hardware • Two high-precision scales • Installation assistance Mill Packages with Bolthole Cycle Features: • Easy-to-read display • Resolution: .0002/.0005" • 20-tool offset • Bolthole cycle • Radius/Diameter mode • Taper calculation 5-YEAR MFR'S WARRANTY 10-11 EH 13-07 MTA.indd 1010-11 EH 13-07 MTA.indd 10 6/19/13 10:36 AM6/19/13 10:36 AM
  11. 11. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com Machine Tool Accessories 11 Industry GUARANTEED! • 60° included angle • For use in a drill chuck or collet • Hardened point is inserted into the center of the tapping handle or tap center • The stroke of the center will follow the tap as it threads the hole, assuring straight and accurate hand-tapped threads • One size can be used for all standard tapping applications • 1⁄2" shank • 3⁄8" spring travel distance Spring Center Sale Price Model # RB328-1923 $ 1698 Regular Price: $22.28 Morse Taper Solid Dead Centers Bearing Steel or Carbon Steel With 60˚ Included Angle • Precision hardened and ground to closest tolerance As Low As $ 368 Carbon Steel Bearing Morse Hardened & Ground Low Steel Low Taper OAL Model # Price Model # Price 1 35⁄16" RB251-3061 $3.68 RB251-3041 $13.17 2 43⁄16 RB251-3062 5.37 RB251-3042 14.93 3 415⁄16 RB251-3063 6.27 RB251-3043 20.91 4 65⁄16 RB251-3064 9.06 RB251-3044 31.08 5 81⁄2 RB251-3065 22.07 RB251-3045* 56.47 * OAL is 77⁄8" SAVEUP TO 31% 4 Pc. Pin Vise Sets • For holding small rods, wire, drills, taps and other small tools • Tool steel collets are hardened and grip firmly when screw chuck is tightened • Nickel-plated handle is hollow to permit holding of long rods or wire • Meets Government specs Reg. Sale Brand Capacity Model # Price Price Import India 0-.187" RB830-0320 $14.74 $9.95 Import England 0-.150 RB891-6886 29.41 19.95 General 0-.187 RB891-5435* 61.89 45.95 As Low As $ 995 * Includes vinyl pouch • Five-axis adjustment moves the stop to any position your job requires • 1⁄4" stop rod can be modified, replaced or extended with a longer piece of bar stock • Locking lever can be positioned at 360° to avoid interference • T-nut to fit 5⁄8" table slots 5-Axis Milling Stop Low Price Model # RB337-9322 $ 9295 5C Collet Rack • Holds up to 30 collets • 18 gage steel • Blue-baked-enamel finish • Can be hung on wall or can be set on workbench • 91⁄2 x 12", .048" thick., 51⁄2" high at one end and 21⁄2" at other end • Wt.: 3 lbs Low Price Model # RB239-9030 $ 995 Precision Live Centers • Dust-, chip- and oil-proof mechanism with labyrinth packing and special oil seal • Seal has a running-in period of approximately 250 hours, during which time heating may be noticed — this is not detrimental to the center and will not occur when the seal has been run-in • Center is fitted with pre-loaded taper roller bearings CNC Triple Bearing Live Centers • Hardened and ground to 61-65 Rockwell • Concentricity within .0002" Morse Low Taper Model # Price 2 RB328-0164 $100.70 3 RB328-0165 109.63 4 RB328-0166 146.72 5 RB328-0167 186.48 Starting At $ 5567 Morse Point Load Max. Low Taper OD Dia. OAL Cap. rpm Model # Price 1 1.339" 0.669" 4.528" 200 lbs. 6700 RB328-0158 $55.67 2 1.457 0.866 4.921 600 6400 RB328-0159 80.02 3 1.850 1.181 6.417 900 5000 RB328-0160 100.52 4 2.165 1.378 7.598 1800 4100 RB328-0161 124.21 5 2.756 1.772 9.449 3000 3400 RB328-0162 176.95 6 3.544 2.362 12.598 7500 2700 RB328-0163 282.26 CNC NEW LOW PRICES 10-11 EH 13-07 MTA.indd 1110-11 EH 13-07 MTA.indd 11 6/19/13 10:36 AM6/19/13 10:36 AM
  12. 12. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE Machine Tool Accessories 12 FAST & FRIENDLY Customer SAVEUP TO 22%On Qty.: 4+ Neoprene Mounts Thick, non-skid, neoprene cushion provides friction and resists oil. No bolting to floor required. • Isolates impact and vibration • Zinc-plated hardware • Steel load transfer plate • Cutoff stud fits in blind base holes • 1" leveling range • Locks to machine Load Range Base Bolt Usable Sale Price Each Per Mount Dia. Thick. Dia. Bolt L Model # 1-3 4+ 50-250 lbs. 23⁄8" 3⁄4" 3⁄8"-16 3" RB325-6627 $8.53 $6.79 250-500 3 7⁄8 1⁄2-13 4 RB325-6629 11.95 9.29 500-1000 33⁄8 1 1⁄2-13 4 RB325-6615 13.95 10.99 1000-2000 5 11⁄4 5⁄8-11 5 RB325-6626 22.95 18.49 2000-4000 63⁄4 13⁄8 5⁄8-11 6 RB325-6628 52.95 42.29 As Low As $ 679Each Qty.: 4+ SAVEUP TO 22%• Supplied with chuck key Chucks Taper Mounted Thread Mounted *Smooth sleeve Medium-Duty Thread Mounted Chucks Capacity Range Mount Mfr’s Sale Mfr’s # Min./Max. Thread Key # Model # List Price 1B 3⁄8 .040/.250" 1/6.5mm 3⁄8"-24 K1 RB290-1404* $56.51 $45.00 2BA 3⁄8 .040/.375 1/10 3⁄8-24 K2 RB290-1400 75.83 59.00 41BA 3⁄8F .040/.375 1/10 3⁄8-24 K30 RB240-2825 67.02 52.00 33BA 1⁄2 .08/.500 2/13 1⁄2-20 K32 RB290-1408 78.15 61.00 33BA 3⁄8 .08/.500 2/13 3⁄8-24 K32 RB290-1406 81.56 63.00 33BA 5⁄8 .08/.500 2/13 5⁄8-16 K32 RB290-1412 81.45 63.00 • For extra heavy-duty drilling applications on production drilling machines, radials, jig borers, mills and lathes • Supplied with a chuck key • The world’s most accurate key-type chuck for close-tolerance drilling • The ball-thrust bearing reduces friction in the closing mechanism, for greater tightening on the twist drill shank Ball-Bearing Super Chucks Capacity Range Tapered Mfr’s Sale Mfr’s # Min./Max. Mount Key # Model # List Price 81⁄2N .040/.250" 2JTS K30 RB505-2191 $103.03 $80.00 16N .125/.625 3/16mm 3JT K4 RB505-8005 184.26 143.00 18N .125/.750 3/19 4JT K4v RB505-8006 277.12 216.00 Super Chuck Starting At $ 45 Capacity Range Tapered Mfr’s Sale Mfr’s # Min./Max. Mount Key # Model # List Price Medium-Duty 33 .08/.500" 2/13mm 33JT K32 RB505-2189 $86.18 $67.00 Heavy-Duty 3A .125/.625 3/16 3JT K3 RB290-1320 124.81 97.00 34-02 .040/.500 1/13 2JT K3 RB290-1329 78.00 60.00 34-06 .040/.500 1/13 6JT K3 RB290-1330 104.09 81.00 Plain Bearing Taper-Mounted Drill Chucks SAVEOVER 25% 3 Pc. 5C Collet Set Includes: • Adjustable Collet Stop with fully threaded adjustment screw • Collet Stop Wrench which mates perfectly with collet and keyway of collet • 3" Collet Stop Extension Tube. Two or more tubes can be coupled for any length to stop desired Sale Price Model # RB328-0185 $ 3595 Regular Price: $49.89 Quill-Feed Speed Handles For Bridgeport-Type Mills Only • Spring pushes pin back from quill-feed actuation up or down • Heavy-duty construction • 1" bore SAVE 28% Sale Price Model # RB505-2171 $ 2599 Regular Price: $36.52 Low Description Model # Price Single Position RB337-9316 $10.89 Double Position RB337-9317 19.95 Quickie Vise Handles • Fits all 6" vises with 3⁄4" hex • Machined anodized aluminum As Low As $ 1089 m NEW LOW PRICE Plastic CNC Tool Racks Holds 10 Tools • 16L x 7W x 5"H • Portable Taper Size Model # CAT-30 RB327-4083 CAT-40 RB327-4084 Your Choice $ 1995 Regular Price: $31.44 SAVEOVER 35% 12-13 EH 13-07 MTA.indd 1212-13 EH 13-07 MTA.indd 12 6/19/13 11:08 AM6/19/13 11:08 AM
  13. 13. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com Machine Tool Accessories 13 Service 800-USE-ENCO SAVEUP TO 39% • 4" table utilizes low-profile locks for added workspace • 10-second vernier reading • Gear drive immersed in oil • Extra-deep coolant channel • Dual positive-action locks • Satin-chrome dials • 90:1 gear ratio • Low profile Accessory Table Reg. Sale Dia. Model # Price Price Tailstocks for Hor./Vert.Tables 8 & 10" RB200-1098 $218.13 $115.95 Rotary Tables *ShipsTruck Freight Table Ht.O/A Center Morse T-Slot Approx. Reg. Sale Dia. Horiz. Vert. Taper W Wt.Lbs. Model # Price Price Horizontal/Vertical RotaryTables 8" 3.94" 5.98" 3 .465" 95 RB200-1143 $455.61 $289.95 10 4.33 6.75 3 .465 137 RB200-1153* 594.12 359.95 Horizontal RotaryTables 6 3.2 — 2 .390 42 RB200-1076 311.97 209.95 8 4.1 — 3 .465 55 RB200-1078 386.37 279.95 10 4.5 — 3 .465 82 RB200-1080 436.80 299.95 12 5.3 — 4 .545 168 RB200-1082* 759.42 479.95 Specifications Max. Variation Flatness of Clamping Surface (Concave): .0006" Concentricity of Center Bore: .0008" Parallelism of Clamping Surface to Angle Face: .0008" SquarenessofAngleSurfacetoClampingSurface(Hor./Vert.only): .0004" Squareness of Clamping Surface to Center Slot: .0008" Accuracy: 4, 6 & 8"Table 1 min. 20 sec. 10, 12 & 16"Table 45 sec. As Low As $ 20995 Toolholding Fixtures • Change end mills, drills, collets and retention knobs quickly and securely • Made from 6061 anodized aluminum with steel key • 4 Counterbored screw holes on base for mounting on workbench, toolbox or side of machine • Can be assembled for horizontal or vertical use • Base length: 4" • Adjustable handle can be lifted and turned to any position For CAT or BT Toolholders Reg. Sale Taper Model # Price Price CAT40 & BT40 RB404-1522 $99.34 $75.95 CAT50 RB404-1524 103.53 85.95 SAVEUP TO 23% Starting At $ 7595 SAVE 25% Parallel Separator • Spring-loaded parallel separator holds parallels securely in place • Can be used on vises up to 6" jaw width Sale Price Model # RB328-0100 $ 3995 Regular Price: $54.55 SAVEUP TO 29% CAT V-Flange Collet Chucks ER Collet Series • Constructed of alloy steel for long, durable service life • Hardened to RC 52-56 for long service life • Shiny taper with black-oxide finish for the best combination of accuracy and durability • Through-spindle coolant capability Collet Collet Mfr’s Sale Series Size Proj. Model # List Price CAT 40 ER-16 .020-.433" 2.5" RB308-0276 $191.00 $133.99 ER-16 .020-.433 3 RB308-0277 180.00 126.99 ER-16 .020-.433 5 RB308-0278 201.00 141.99 ER-20 .039-.511 3 RB308-0279 184.00 130.99 ER-20 .039-.511 4 RB308-0280 188.00 132.99 ER-20 .039-.511 6 RB307-0777 204.00 143.99 ER-25 .039-.629 2 RB308-0282 184.00 130.99 ER-25 .039-.629 4 RB308-0283 193.00 135.99 ER-25 .039-.629 6 RB308-0284 221.00 156.99 ER-32 .078-.787 3 RB308-0285 191.00 133.99 ER-32 .078-.787 4 RB308-0286 193.00 135.99 ER-32 .078-.787 6 RB308-0287 210.00 148.99 ER-40 .118-1.181 4 RB308-0288 193.00 135.99 ER-40 .118-1.181 6 RB308-0289 221.00 156.99 CAT 50 ER-16 .020-.433 4 RB308-0290 203.00 145.99 ER-16 .020-.433 6 RB308-0291 215.00 154.99 ER-20 .039-.511 4 RB308-0292 217.00 156.99 ER-20 .039-.511 6 RB308-0293 235.00 168.99 ER-20 .039-.511 8 RB308-0294 261.00 187.99 ER-25 .039-.629 4 RB308-0295 221.00 158.99 ER-25 .039-.629 6 RB308-0296 238.00 171.99 ER-32 .078-.787 4 RB308-0297 224.00 159.99 ER-32 .078-.787 6 RB308-0298 240.00 172.99 ER-40 .118-1.181 4 RB308-0301 254.00 182.99 ER-40 .118-1.181 6 RB308-0300 280.00 201.99 Starting At $ 12699 SAVE 25% Avg.Pull Reg. Sale Dia. Lbs. Model # Price Price 113⁄64" 7 RB891-8105 $4.00 $2.99 17⁄16 11 RB890-9756 4.00 2.99 21⁄32 19 RB325-6892 4.00 2.99 • Does not mark or tear paper • Magnetic strength holds through many layers of print • Ideal for holding papers, prints and charts against partitions, machinery and metal desks Round Magnetic Print Holders Your Choice $ 299 12-13 EH 13-07 MTA.indd 1312-13 EH 13-07 MTA.indd 13 6/19/13 11:08 AM6/19/13 11:08 AM
  14. 14. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE Machine Tool Accessories 14 Ask the Enco Tech Team to help SAVEOVER 20% Keyless Drill Chucks with Integral Shank • Integral shank design is more compact than a combined drill chuck and arbor, resulting in greater accuracy and rigidity • Self-tightening (clockwise rotation only) • Max. rpm: 7000 • Cap.: 1⁄32-1⁄2" • Diameter: 2" • Precision balanced Chuck Shank Mfr’s Sale Model Type Model # List Price CP130-5⁄8 5⁄8" SS RB890-9230 $339.00 $259.95 CP130-R8 R8 RB890-9226 374.00 287.95 CP130-2MT 2MT RB890-9227 340.00 259.95 CP130-3MT 3MT RB890-9228 342.00 263.95 CP130-4MT 4MT RB890-9229 361.00 278.95 As Low As $ 25995 Wt. Reg. Sale Description L Ht. W Lbs. Model # Price Price Hand-held Demagnetizer/magnetizer 9" 1" — 3 RB285-2520 $69.00 $39.95 Demagnetizer 63⁄4 31⁄2 41⁄4" 11 RB285-2505 69.00 39.95 Demagnetizers Quickly Demagnetize Tools by Drawing Across Surface • 110 volt, on/off switch Your Choice $ 3995 SAVEOVER 40% Reg. Sale Size Model # Price Price 30 & R8 RB240-3152 $107.57 $82.95 40 & 5C RB240-3153 127.87 94.49 50 RB240-3154 218.20 159.95 Spindle Socket Cleaning Tool Sets For Milling/Drilling/Boring/Grinding Machines • Cleans socket with a twist of the wrist while spindle is stationary • Quickly removes chips and foreign matter • Prevents malfunctioning of automatic tool changers when dirt and varnish build-up inhibit tool release • Special compounded blade cleans like a “squeegee” for improved spindle performance • Compressed air, rags not required Includes: Holder, set of ST-Black and set of VR-Yellow replacement blades. Starting At $ 8295 nary ment blades SAVEUP TO 25% SAVEOVER 20% Classic Keyless Drill Chucks Heavy-Duty Taper Mounted • “The World’s Most Accurate Keyless Drill Chuck” • Widely used today on the finest precision drilling machinery where close tolerance drilling is essential • Hardened alloy steel working parts • Use on high-accuracy drill presses, jig borers, milling machines and production drilling equipment • Model 15J0 keyless drill chuck is especially designed for holding small diameter twist drills and has a micrometer graduation to change the smallest drills Jacobs Mfr’s Sale Mfr’s # Capacity Taper rpm Model # List Price 15J0 0-1⁄16" 0 50,000 RB290-1230 $277.00 $213.99 30J0 0-1⁄8 0 35,000 RB290-1235 225.00 172.95 30J1 0-1⁄8 1 35,000 RB290-1240 225.00 172.95 50J1 0-3⁄16 1 25,000 RB505-2198 227.00 175.00 65J1 0-1⁄4 1 20,000 RB290-1250 244.00 189.00 100J33 0-3⁄8 33 12,000 RB290-1255 277.00 214.00 100J2 0-3⁄8 2 12,000 RB290-1260 277.00 214.00 130J33 1⁄32-1⁄2 33 7000 RB290-1265 307.00 237.95 130J2 1⁄32-1⁄2 2 7000 RB290-1270 307.00 237.95 130J6 1⁄32-1⁄2 6 7000 RB290-1275 307.00 237.95 160J6 1⁄8-5⁄8 6 4000 RB290-1280 347.00 267.95 As Low As $ 17295 R8 13 Pc. Collet Set & Tool Tray • Sturdy aluminum casting does not scratch • 2 rows with holes under 1" • Attaches to any milling machine by 2 screws (included) • Design of tray permits dirt and chips to fall through • Dimensions: approximately 14W x 9"D • Includes 1⁄8 to 7⁄8" by 16ths collets • Tray holds 15 collets Sale Price Model # RB240-3180 $ 6595 Regular Price: $97.83 Sale Price Model # RB411-0092 $ 1395 Regular Price: $16.84 Quick and Easy—Just stop, lock, remove and you’re ready to machine! • For CNC or manual lathes whether manually pulling a bar through a collet/chuck or using a bar puller (first pull for each bar) • Gage lengths up to 51⁄2" long • Can be used on all stock shapes up to 3" round • Self-centering, unobstructed viewing • Change dull drills (up to 3⁄4" dia.) in your turret • Mill both sides of your stock without a stop in the way • Also a ruler for visual reference C Collet/Chuck Stop Lathe & Mill Vise Tool SAVE 43% Boring Head with R8 Shank • Rugged construction for smooth, chatter-free operation • Precision boring head with integrated R8 shank • 21⁄2" head with 3⁄4" offset travel • 1⁄2" diameter vertical and cross holes • Black-oxide finish • .001" direct reading micrometer dial Sale Price Model # RB328-0184 $ 7595 Regular Price: $133.28 RB285-2520 RB285-2505 14-15 EH 13-07 MTA_DP.indd 1414-15 EH 13-07 MTA_DP.indd 14 6/19/13 11:15 AM6/19/13 11:15 AM
  15. 15. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 15 you select the Right Machine! Drill Presses Specifications Swing: 20" Capacity: 11⁄4" Mild Steel SpindleTravel: 61⁄2" Spindle to Base: 483⁄8" Max. Table Size: 22 x 19" Column Dia.: 4" Quill Dia.: 3" Horsepower: 11⁄2 Overall Height: 741⁄2" OverallWidth: 22" Overall Depth: 36" • 300 - 2000 RPM, 61⁄2" spindle travel • Heavy base with ground surface • 3 MT with drawbar (can accept 3 MT tang tooling) • 5⁄8" Table T-Slots • Quick speed changes, easy table adjustment • Positive depth control 20" Infinitely Variable Speed Drill Presses *Quill feeds:0.004,0.006,0.008" per Rev. †Spindle travel:41⁄4" Reg. Low Description Wt. Model # Price Price 11⁄2 HP, 220V, 1Ph. 750 lbs. RB126-2655 $2,533.42 $2,400.00 11⁄2 HP, 220V, 3Ph. 750 RB126-2665 2,533.42 2,189.95 11⁄2 HP, 220V, 3 Ph.with Auto Quill Feed 750 RB126-2675*† 2,955.66 2,659.95 As Low As $ 2,18995 SAVEUP TO 13% 1 year limited warranty! Specifications Swing: 45⁄16" Drilling Capacity: 1⁄4" Speeds (No.) Range: (3) 5000, 6500, & 8500 rpm SpindleTaper: JT1 Chuck Capacity: 1⁄4" Overall Height: 153⁄4" Base Size (L xW): 93⁄8" x 611⁄16" Voltage: 115 ShipWt.: 10 lbs. • Great for circuit board work • For use with drills under 1⁄4" Miniature Drill Press Sale Price Model # RB328-6573 $ 14998 Regular Price: $169.98 SAVEOVER 10% Drill Presses Bench & Floor Models • All models include drill chuck plus drill chuck arbor on floor models • Motor and electrics: 1⁄2 HP, 115/230V, 1 ph. (1 HP, 120V, 1 ph. on 211⁄8" model) • Table T-slots: 1⁄2" (3⁄4" on 211⁄8" model) • Table tilt: 45° (40° on 211⁄8" model) Bench Model Floor Model Specifications Bench Models Floor Models Swing: 10" 13" 133⁄4" 17" 211⁄8" Drilling capacity: 1⁄2" 5⁄8" 5⁄8" 3⁄4" 1" Spindle taper: 33JT 2 MT 2 MT 2 MT 3 MT Quill travel: 23⁄8" 31⁄8" 31⁄8" 31⁄4" 413⁄16" Chuck capacity: 1⁄2" 5⁄8" 5⁄8" 5⁄8" 5⁄8” No.of speeds/RPM range: 5/680-3160 16/250-3000 16/210-3600 16/240-3380 12/180-4200 Overall height: 295⁄16" 393⁄8" 621⁄2" 64" 70" Table size: 77⁄8 x 77⁄8" 117⁄16" Dia. 9 x 9" 111⁄2 x 111⁄2" 185⁄8 x 161⁄8" Column diameter: 23⁄8" 27⁄8" 27⁄8" 31⁄8" 35⁄8" Base size: 131⁄8 x 8" 175⁄16 x 97⁄8" 173⁄4 x 101⁄2" 195⁄8 x 117⁄8" 221⁄2 x 191⁄2" Approx.wt.: 73 lbs. 89 lbs. 121 lbs. 187 lbs. 324 lbs. Order # RB327-5882 RB308-0056 RB308-0058 RB308-0059 RB308-0060 Reg.Price $329.76 $439.23 $516.98 $659.98 $1,011.98 Sale Price $259.95 $339.95 $329.95 $459.95 $869.95 As Low As $ 25995 SAVEUP TO 36% 14-15 EH 13-07 MTA_DP.indd 1514-15 EH 13-07 MTA_DP.indd 15 6/19/13 11:15 AM6/19/13 11:15 AM
  16. 16. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE16 Machinery ManualsMetal Fabricating SAVEUP TO 41% Hydraulic Presses Cap. Base Wt. Reg. Sale Description Tons Stroke W Height Lbs. Model # Price Price Bench Model 12 6" 20" 37" 155 RB240-7754 $326.95 $219.00 Floor Model 12 6 24 613⁄4 190 RB890-0829 587.95 349.00 Floor Model 20 7 32 67 265 RB890-0830 713.95 425.00 Floor Model 50 63⁄4 38 73 600 RB890-0831 2,374.95 1,399.00 • All welded-steel construction • Heavy-duty return springs for fast ram retraction • Includes bed plates and bearing punch • 50 ton unit is used to press, straighten, bend or remove and install gears and bearings Starting At $ 219 SAVEUP TO 18%Blade Handle Wt. Reg. Sale L L Lbs. Model # Price Price 6" 28" 40 RB130-5710 $85.76 $69.95 12 39.5 100 RB130-5700 133.66 119.95 Specifications Blade L: Cap.Round: Flat Bar: Plates: 6" 3⁄8" 23⁄4 x 1⁄4" 3⁄32" 12 7⁄16 23⁄4 x 1⁄4 1⁄8 • Compound leverage for easy operation • Long handle provides plenty of shearing torque • Tool steel blades for long life • Mounts directly to your workbench Bench Top Shears Cuts Sheet Steel, Bars & Rods As Low As $ 6995 SAVEUP TO 19% Dia.of Min. Wt. Reg. Sale Description Rolls Radius Lbs. Model # Price Price 24" x 20 Gauge 2" 1" 195 RB130-4501 $439.09 $395.95 36" x 22 Gauge 2 1 273 RB130-4511 483.80 409.95 50" x 16 Gauge 3 11⁄2 528 RB130-5501 997.43 799.95 • Maximum gauge capacity is applicable when using mild steel • Using galvanized steel lowers maximum gauge capacity Shown with Stand, sold separately. Slip Rolls Starting At $ 39595 1-YEAR LIMITED WARRANTY Reg. Sale Description Model # Price Price Stand (56" x 17" x 24") RB130-5075 $219.98 $179.95 Stand for 50" x 16 Gauge Slip Roll 40 Ton Ironworkers Fabrication Machine SAVE$ 511 Features: • Punches, shears, notches, bends and forms • 110v AC, 1 ph. • All guarding complies with ANSI B11-5 standards • Meets American National Safety standards for ironworkers Standard Equipment: • 2" die holder • Punch retaining nut and stripper • Power cavity includes 3-in-1 shear Mfr’s # MP4000 Accessories Reg. Sale Description Dimensions Mfr’s # Model # Price Price Brake for MP4000 8" MP4110 RB890-0444 $746.27 $579.00 Notcher - Heavy-Duty 2 x 13⁄4" MP4120 RB890-0445 746.27 579.00 5 Pc.Round Punch Starter Set 1⁄4, 3⁄8, 1⁄2, 5⁄8, 3⁄4" MP4140 RB890-0447 209.20 159.00 Specifications Rated on 65,000 psiTensile Speed: spm Approx.4-6 Motor: 3⁄4 hp, 110v, 1 ph. Throat Depth: 33⁄4" Punch Capacity: 40Tons Pipe Notchers: 1⁄2, 3⁄4, 1, 11⁄2, 2" Shear: Flat Bar: 3⁄8" x 4" and 1⁄4" x 6" Angle: 1⁄4" x 3" x 3" Rod: 3⁄4" Square: 5⁄8" Hydraulics: 2500 psi Oil Capacity: 1 US Gallon Dimensions: 24W x 551⁄4H x 30"L Weight: 410 lbs. Sale Price Model # RB890-0442 $ 2,595Regular Price: $3,106.77 1-YEAR LIMITED WARRANTY 1-YEAR LIMITED WARRANTY Starting At $ 3,14995 SAVEUP TO $ 743 52" Hydraulic & Pneumatic Shears 16 Gauge Capacity (mild steel) • Guarded foot switch • 3 hp, 220v • Cap. back gauge—27" • Cap. front gauge—26" Wt. Reg. Sale Description spm Lbs. Model # Price Price Pneumatic 25 1,155 RB130-5355 $3,707.98 $3,149.95 Hydraulic 60 1,350 RB130-5345 4,943.98 4,200.00 16-17 EH 13-07 MetFab.indd 1616-17 EH 13-07 MetFab.indd 16 6/19/13 11:16 AM6/19/13 11:16 AM
  17. 17. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 17 Online at use-enco.com Metal Fabricating SAVEOVER 10%On Notcher 4 Ton Hand Notcher Notch Any Shearable Material • Heavy-duty blades Specifications Mild Steel Cap.: 16 Gauge Max.Notch: 6" x 6" x 90° Stroke: 3⁄4" Stainless Cap.: 20 Gauge Table Size: 171⁄2 x 12" Stand sold separately Stand Model # RB130-5115 Low Price:$199.99 Sale Price Model # RB130-5110 $ 395Regular Price: $456.28 SAVE 23% 50" x 16 Gauge Power Roll Specifications Motor: 220v*, 3 ph., 3⁄4 hp Roll Speed: 22 rpm Capacity: 16 gauge Min.Radius: 1.5" Roll Dia.: 3" Weight: 880 lbs. *Can be rewired to 440v 1-YEAR LIMITED WARRANTY Sale Price Model # RB130-5510 $ 2,200Regular Price: $2,857.78 SAVEUP TO 35% Work Wt. Press Reg. Sale Ton Range Lbs. Style Model # Price Price 6 0-8" 68.2 H RB307-0121 $167.12 $119.95 30 0-34 286 HYC RB307-0126 929.06 599.95 45 0-31 693 HYC RB307-0125 1,119.40 849.95 Style HYC • Use for aligning jobs, such as straightening crankshaft and connecting rod • Great for press fit, such as pressing in and out of shaft pin, gear and bushing • Use for die press and punch press processing Hydraulic Shop Presses Style H Starting At $ 11995 Sheet Metal Pan & Box Brakes Wt. Reg. Sale Model Gauge Lbs. Model # Price Price Bench 22 280 RB130-5051 $529.13 $449.00 Bench 16 309 RB130-5061 716.54 609.00 Floor 12 1525 RB130-5234 1,998.98 1,799.00 Stand 64 RB130-5075 219.98 179.95 • Steel fingers can be removed or repositioned for custom metal work • Model #RB130-5061 includes counterbalance RB130-5051 As Low As $ 449 Specifications RB130-5051 RB130-5061 RB130-5234 Mild Steel Cap.: 22 Gauge 16 Gauge 12 Gauge Stainless Cap.: 26 Gauge 20 Gauge 16 Gauge Max.Beam Lift: 7⁄8" 11⁄4" 11⁄2" Max.Bend L: 481⁄4" 481⁄4" 481⁄4" Min.Reverse Bend: 5⁄16" 5⁄16" 1⁄2" FingerWidth: 2, 3, 4" 2, 3, 4" 3, 4, 5" No.of Fingers: 16 16 10 Max.Box Depth: 3" 3" 4" Beam Adjustment: 0-1⁄8" 0-1⁄2" 0-1⁄2" SAVEUP TO 18% Pipe Bender 12 Tons of Hydraulic Power • Easy, lower cost way to bend pipe, conduit, tubing, I-beam and channel steel • Bends up to 2" schedule 40 pipe or 4" I-beam • 110v AC, plugs into standard 20 amp outlet • 2500 psi • Wt.: 250 lbs. Sale Price Model # RB890-0434 $ 1,79999 Regular Price: $2,075.86 SAVEOVER $ 260On 6 Pc. Set Accessories Individual Pipe Dies Bend Reg. Sale Size Radius Model # Price Price 1⁄2" 2.94" RB890-0435 $151.39 $105.00 3⁄4 3.68 RB890-0436 173.04 119.00 1 4.55 RB890-0437 216.28 148.00 11⁄4 5.81 RB890-0438 251.71 179.00 11⁄2 6.65 RB890-0439 307.76 209.00 2 8.31 RB890-0440 373.13 255.00 6 Pc.90° Pipe Die Set • Precision machined, cold drawn, 1018 steel for long life • Sizes 1⁄2-2" Model # RB890-0441 Reg.Price:$1,182.88 Sale Price:$929.00SAVEOVER 10% 1-YEAR MANUFACTURER’S WARRANTY 16-17 EH 13-07 MetFab.indd 1716-17 EH 13-07 MetFab.indd 17 6/19/13 11:17 AM6/19/13 11:17 AM
  18. 18. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE18 Conserve Your Cash! Ask us aboutSanding & Finishing SAVEUP TO 37% • Extended shafts for buffing and polishing odd-shaped pieces • Bearings lubricated for long life • 3450 rpm • Cast-iron housing • Buffing wheels not included Electric Buffers Buffing Shaft Reg. Sale hp Wheel Dia. Dia. Model # Price Price 1⁄3 6" 1⁄2" RB619-2890 $168.76 $109.95 1⁄2 8 3⁄4 RB619-2891 242.68 169.95 1 10 1 RB619-2892 470.60 295.95 As Low As $ 10995 SAVE 22%On Dust Collector Portable Dust Collector Specifications Motor & Electrics: 1 hp, 110v, 1 ph. Blower Capacity: 750 cfm Bag Connections: 1 Connector Diameter: 4" • Portable - easily moved from job to job • 4" intake handles large chips and sawdust easily and effectively • Heavy-duty carrying frame • Ball bearing casters for easy rolling • Wt.: 45 lbs. Sale Price Model # RB150-3025 $ 20995 Regular Price: $271.90 Low Description Wt. Model # Price Replacement Dust Bag 1 lb. RB150-3027 $12.82 Accessory SAVE 10% Combination 1" x 42" Belt & 8" Disc Sander • Belt table tilt: 45° out • Disc table size: 4 x 10" • Disc table tilt: 45° out • Dust collection outlet: 11⁄2" dia. • Overall dimensions: 22 x 21 x 14" • Belt table size: 61⁄8 x 71⁄8" • 3000 sfm belt speed • 1725 rpm disc speed • 1⁄3 hp, 115v, 1 ph., 60 Hz motor • Approx. wt.: 62 lbs. Mfr’s # J-4002 Sale Price Model # RB328-1052 $ 449Mfr’s List $499.00 6" x 89" Belt Edge Sander With Heavy-Duty Stand • Table can be tilted for horizontal/vertical sanding • Belt tension can be easily adjusted • 32" table length • 2 hp, 60 Hz motor, 110/220v • 3900 fpm • Approx. wt.: 240 lbs. Low Price Model # RB163-6089 $ 69898 SAVE 22% 6" x 48" Belt & 9" Disc Sander With Stand • Quick belt adjustment • Belt locks at any angle from horizontal to vertical • Tilting table with miter gage • 3⁄4 hp, 115v, 1-phase motor • 1350 sfpm • 45° table tilt • Approx. wt.: 130 lbs. Sale Price Model # RB163-4900 $ 27995 Regular Price: $359.48 SAVE 20% 12" Disc Sander Specifications Disc Diameter: 12" Motor & Electrics: 1 hp, 115v, 1 ph. Spindle Speed: 3470 rpm Table Size: 8" x 171⁄2" Approx.Wt.: 70 lbs. • Excellent for both wood and metal • Great for deburring • Uses low cost PSA discs • Complete with miter gage Sale Price Model # RB163-4805 $ 275Regular Price: $343.80 6" x 48" Belt & 10" Disc Sander • Belt operates in horizontal or vertical position • Two cast-iron tilt tables • Miter gage standard • 1 hp, 115v, 1-phase motor • 1650 sfpm belt speed/1750 rpm disc speed • Wt.: 170 lbs. MFR'S 1-YEAR LIMITED WARRANTY Sale Price Model # RB328-1056 $ 1,17900 Mfr’s List: $1,199.00 FREE PLUS BONUS MAIL-IN REBATE JET Tool Box with Purchase *Visit www.use-enco.com for mail-in redemption form. Requires proof of purchase. Cannot be combined with any other offer. Offer Valid 7/1/13 - 8/31/13. Void where prohibited. While supplies last. $ 170 Value Vi i f il i d 18-19 EH 13-07 S&F.indd 1818-19 EH 13-07 S&F.indd 18 6/19/13 11:18 AM6/19/13 11:18 AM
  19. 19. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 19 our Lease Payment Plans today! Sanding & Finishing SAVE 31%On Grinder Replacement Wheels Reg. Sale Description Model # Price Price 5" Dry ReplacementWheel RB328-1959 $38.77 $27.29 Wet-Dry Grinder 8"/5" • 8" wet grinder wheel for fine finishing • 5" dry wheel for removing deep nicks and scratches without damaging • Blade holder for easy sharpening • 1⁄4 hp • Water tank for cooling • 3450 maximum rpm • 1" wheel width • 1" spindle • Wt.: 30 lbs. Sale Price Model # RB328-1961 $ 19995 Regular Price: $293.19 Belt Sanders 1" x 42" Sander—1⁄3 hp, 1-phase Motor • 1800 sfpm • Contact wheel • Tilt table • 1725 rpm 2" x 48" Sander—1⁄2 hp, 1-phase, 115v Motor • Contact wheel • Tilt table • Removable platen • Fully hinged guard • Vertical or horizontal • 4500 sfpm • 3450 rpm 4" x 36" Sander—1⁄2 hp, TEFC 1-phase, 115v Motor • Direct drive • 3450 rpm • Full OSHA safety guard • Easy opening side door for belt change 1 x 42" Sander Belt Wt. Reg. Sale Size Lbs. Model # Price Price 1 x 42" 29 RB505-1371 $286.11 $259.00 2 x 48 48 RB505-1370 452.43 409.00 4 x 36 50 RB240-3857 674.19 609.00 As Low As $ 259 SAVEUP TO 50% Stand (optional) • 3450 rpm • 115v/60 Hz Includes: • A bright, flexible worklight (bulb sold separately) • Two grinding wheels: Coarse 36 grit and medium 60 grit • Protective spark guard on each wheel with adjustable eye shield • Durable cast-iron base with mounting holes and rubber feet for easy mounting Bench Grinder Stand • 27" height • Sturdy base with pre-drilled holes for mounting on floors • Base mounting area for bench grinders: 101⁄2 x 71⁄2" Bench Grinders 8" Bench Grinder Starting At $ 8595 Spindle Wt. Reg. Sale Description Size hp Amps Lbs. Model# Price Price 6" Grinder 1⁄2" 1⁄2 3.5 23 RB890-0832 $169.95 $85.95 8" Grinder 5⁄8 3⁄4 5.0 31 RB890-0833* 189.95 89.95 Stand 20 RB890-0834 98.95 59.95 * 6' power cord SAVE 15%on Sander Specifications Belt Size: 1W x 30"L Disc Size: 5" Motor & Electrics: 1⁄4 hp, 110v, 1 ph. TableTilt: 0° to 45° Approx.Wt.: 12.75 lbs. Combination 1" x 30" Belt & 5" Disc Sander Use for Grinding, Sharpening, Sanding & Polishing Wood & Metal 5" Aluminum Oxide PSA Discs Reg. Sale Grit Model # Price/100 Price/100 36 RB391-3161 $70.01 $48.29 40 RB391-3162 63.92 44.43 50 RB391-3163 60.88 42.49 60 RB391-3165 58.85 40.57 80 RB391-3164 55.80 38.70 Sale Price Model # RB163-4832 $ 10995 Regular Price: $129.88 SAVE 26% 6" Carbide/ HSS Grinder • Supplied with 2 medium grit silicon carbide (green) wheels Specifications: • Two 113⁄4 x 41⁄8" tool tables tilt 45° up or down • 1⁄2 hp motor, single phase, 115v • 3400 rpm • Wt.: 110 lbs. Sale Price Model # RB891-8106 $ 24995 Regular Price: $339.88 Specifications Belt Size: 4 x 36" Table Size: 5" x 71⁄2" Disc Size: 6" Main Motor: 110v, 1⁄4 hp, 60 hz, 1 ph. Speed: 1720 rpm Machine Dimensions: 20 x 16 x 12" ApproximateWt.: 38.64 lbs. • Disc angle and bevel sanding • Finish edging • Sanding arm locks and can be used in any position from horizontal to vertical Combination 4" x 36" Belt & 6" Disc Sander Sale Price Model # RB163-4850 $ 119Regular Price: $139.98 18-19 EH 13-07 S&F.indd 1918-19 EH 13-07 S&F.indd 19 6/19/13 11:18 AM6/19/13 11:18 AM
  20. 20. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE20 We stock over 20,000 ReplacementBandsaws SAVEUP TO $ 370 Cutting Reg. Sale Width Model # Price Price 14" RB135-1545 $2,978.88 $2,769.95 18 RB135-1551 3,351.68 2,979.95 14" & 18" Vertical Bandsaws Infinitely Variable Speed • Cuts steel, aluminum alloys, cast iron, brass, plastic or plexiglass • Table inclination 15° front and back, 15° right and left 1-YEAR LIMITED WARRANTY • Large cap. built-in welder and grinder • 1⁄8" to 5⁄8" width cap. • Grinding wheel and built-in light • Blade cutter Standard Equipment Starting At $ 2,76995 Specifications 14" 18" Cap.Thickness: 91⁄4" Max. 10" Max. Table Size: 193⁄4 x 193⁄4" 231⁄2 x 191⁄2" Blade Length: 114.7" 136" BladeWidth: 3⁄32 to 5⁄8" 3⁄32 to 5⁄8" BladeThickness: .025" .025" Speeds: 65 to 265 sfpm 80 to 320 sfpm Floor toTable Ht.: 391⁄4" 381⁄4" Overall Height: 68" 79" Welder: 1.2 kva 2.4 kva Motor & Electrics: 1 hp, 220v, 1 ph. 1 hp, 220v, 3 ph. Wt.: 760 lbs. 770 lbs. SAVEUP TO 50% Bi-Metal Bandsaw Blades Welded to Length • Cobalt high-speed steel cutting edge • Designed for long life in a wide variety of utility and contour cutting operations • Thickness: .035" • Variable tooth Each Qty.: 5+ As Low As $ 2395 Blade Mfr’s Sale Price Each L W tpi Model # List 1-4 5+ 7' 9" 3⁄4" 6-10 RB371-0410 $46.26 $32.95 $23.95 7' 9 3⁄4 10-14 RB371-0412 46.26 32.95 23.95 10' 3⁄4 6-10 RB240-4965 55.07 30.95 25.95 10' 3⁄4 10-14 RB240-4966 55.07 30.95 25.95 10' 1 10-14 RB240-4967 63.01 30.95 25.95 11' 6" 1 5-8 RB240-4831 70.80 42.95 35.95 11' 6" 1 10-14 RB371-0446 70.80 44.95 37.95 5" x 6" Horizontal/Vertical Bandsaw 3 Speeds • Vise swivels 45° left • 1⁄3 hp, 110/220v motor • Speed changes 80, 120, 200 sfpm • Automatic cut-off safety switch • Mitering vise & blade guard • Wt.: 125 lbs. Specifications Max.WorkpieceWidth: 6" Throat Depth: 41⁄8" Horizontal Cap.Round: 5" Blade Size: 641⁄2 x 1⁄2 x .025" Wheel Dia.: 73⁄8" Vertical Saw Height: 56" Horizontal Saw Height: 38" Machine Dim.: 38L x 12"D 1-YEAR LIMITED WARRANTY Sale Price Model # RB505-6840 $ 26995 Regular Price: $316.66 al sfpm SAVEOVER 10% Replacement Blade Flexback 6 tpi • 135 x 1 x .035" Model # RB990-4073 Sale Price $19.95 1 year limited warranty! Reg. Sale Description Model # Price Price 10" x 16" Bandsaw RB136-2810 $4,899.98 $4,409.95 10" x 17" Bandsaw RB136-2800 3,579.98 2,995.95 10" x 16" Swivel Frame & 10" x 17" Horizontal Bandsaws • Heavy-duty, cast-iron frame • Blade chip brush • Safety guards • Automatic stop • Coolant system • RB136-2810 features swivel frame and 90-45° quick-acting vise • RB136-2800 features 90-60° quick-acting vise 10 x 16" model shown Specifications 10" x 16" Swivel Frame 10" x 17" Horizontal Frame Motor & Electrics: 2 hp, 220/440v, 3 ph., 60 Hz, 1750 rpm 2 hp, 220/440v, 3 ph., 60 Hz, 1750 rpm 4 Blade Speeds: 82, 131, 167 & 232 sfpm 82, 131, 167, 246 sfpm Cutting Cap.90°: 10 x 16" 10 x 17" Cutting Cap.45°: 9 x 10" 10 x 10" Blade Size: 135 x 1 x .035" 135 x 1 x .035" Machine Dim.: 67L x 22"D 75L x 28"W Approx.Wt.: 1068 lbs. 792 lbs. Starting At $ 2,99595 SAVEUP TO $ 584 20-21 EH 13-07 Bandsaws.indd 2020-21 EH 13-07 Bandsaws.indd 20 6/19/13 11:29 AM6/19/13 11:29 AM
  21. 21. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 21 parts for the Machines We Sell! Bandsaws SAVEOVER $ 100 Hard Edge Flex Back Blade – 7'9"L x 3⁄4"W Specifications Motor & Electrics: 1 hp, 110v, 60 Hz, 1725 rpm 4 Blade Speeds: 90, 135, 195, 255 sfpm Blade Size: 93 x 3⁄4 x .032" Cutting Cap.: 7 x 12" Approx.Wt.: 314 lbs. Replacement Blades 7" x 12" Horizontal/Vertical Bandsaw Hydraulic Feed & Coolant Pump • Portable on four 5" casters • Heavy cast-iron base with quick-lock vise, vertical table saw • Hardened and ground worm gears • Auto shut-off Includes: 10 x 10" vertical table and 45° swivel vise. 1-YEAR LIMITED WARRANTY Sale Price Model # RB137-3175 $ 879Regular Price: $981.69 Reg. Sale tpi Model # Price Price Carbon—.032"Thick 8 RB371-3164 $12.94 $9.99 14 RB371-3165 12.94 9.99 SAVE$ 240 Specifications Motor & Electrics: 1 hp, 220v, 60 Hz, 1 ph., 1720 rpm 3 Blade Speeds : 127, 216, 268 sfpm Cutting Capacity 90°: 7 x 101⁄2", 7" round Cutting Capacity 45°: 4 x 41⁄2", 4" round Blade Size: 93 x 3⁄4 x .032" Machine Dimensions: 50L x 221⁄2"D ApproxWt.: 400 lbs. 7" x 101⁄2" Horizontal/Vertical Bandsaw Geared Swivel Head for Quick Speed Changes Sale Price Model # RB137-3200 $ 1,52995 Regular Price: $1,769.98 • Heavy cast-iron base with quick-lock vise • Hydraulic feed and coolant system • Hardened and ground worm gear, vertical table saw 1 year limited warranty! SAVE 20% Specifications: Motor & Electrics: 1.5 hp, 110v, 1 ph. Blade Speed (No.) Range sfpm: RB337-9149: (4) 114, 196, 288, 377 RB337-9150: (Variable) 95-402 Capacity: Round: 9" Rectangle @ 90°: 5" x 16" Rectangle @ 45°: 8" x 91⁄2" Blade Size: 1149⁄16" x 1" x 0.035" Machine Dimensions: 62"L x 22"D x 481⁄2"H 9" x 16" Horizontal Bandsaws Step Pulley & Variable Speed Models Features: • High efficiency gear drive system (RF-916S: Step Pulley, RF-916SV: Variable Speed) • Fully adjustable hydraulic downfeed • 0 to 45° cutting angle • Carbide bearing blade guide enhances cutting stability and extends blade life • Coolant system for wet cutting • Stand with integral chip/water pan Includes: Bi-metal blade, chip brush and length stop set. Wt. Reg. Sale Description Mfr’s # Lbs. Model # Price Price Step Pulley RF-916S 640 RB337-9149 $2,968.22 $2,395.00 Variable Speed RF-916SV 640 RB337-9150 3,310.70 2,595.95 • Heavy cast-iron base with quick swivel lock vise and vertical saw table • Adjustable hydraulic downfeed and coolant system • Safety automatic shutoff and adjustable material stop • Worm gears are hardened and ground • Roller cabinet has built-in chip pan • Motor & electrics: 1 hp, 220v, 1 ph., 1720 rpm • Model # RB137-3190 includes blade guards, chip brush, adjustable roller blade guides • Model # RB137-3195 has a geared head for quick speed changes 7" x 12" Horizontal/Vertical Bandsaws Specifications RB137-3190 RB137-3195 Blade Speeds: (4) 85, 130, 180, 285 sfpm (3) 127, 216, 268 sfpm Blade Size: 93 x 3⁄4 x .032" 93 x 3⁄4 x .032" Cutting Cap.90˚: 7 x 12", 7" Round 7 x 12", 7" Round Cutting Cap.45˚: 41⁄2 x 7" Approx.Wt.: 350 lbs. 350 lbs. Reg. Sale Description Model # Price Price Horiz./Vert.Bandsaw RB137-3190 $1,099.98 $989.95 Geared Head Horiz./Vert.Bandsaw RB137-3195 1,299.98 1,039.95 RB137-3190 Bi-Metal Blade • 10-14 tpi • 93L x 3⁄4W x .035" thick Model # RB371-0412 Sale Price 1-4 $32.95; 5+ $23.95 Replacement Blades stop SAVEUP TO 20% Starting At $ 98995 1 year limited warranty! 20-21 EH 13-07 Bandsaws.indd 2120-21 EH 13-07 Bandsaws.indd 21 6/19/13 11:29 AM6/19/13 11:29 AM
  22. 22. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE22 Ask the Enco Tech Team to helpMills SAVEUP TO $ 1,937 9" x 49" & 10" x 54" Variable Speed Vertical Mills • Certified Meehanite casting stress relieved to provide a rigid machine structure • Way covers for knee and crossfeed • Precision-hardened and ground table and ways • Dynamically balanced head for quiet, trouble-free operation • One-shot lubrication and solid quill feed • Head tilts 90° R/L, 45° forward/back • U.S. patented ram locking system • Turret swivels 360° • Hand-scraped turret column ways • Dovetail ways (9" x 49"); Square ways (10" x 54") • Upper and lower surface of saddle laminated with Turcite-B for smooth, accurate and wear-resistant surfaces • 3-year warranty on DRO Wt. Reg. Sale Description Lbs. Model # Price Price Mill Only 9 x 49" 2,227 RB307-3678 $8,356.98 $7,100.00 10 x 54" 3,400 RB890-9988 9,986.98 8,359.00 Mill with PowerTable Feed and Anilam® 2-Axis DRO 9 x 49" 2,246 RB307-3689 10,338.98 8,779.95 10 x 54" 3,440 RB307-3691 11,968.98 10,169.95 Mill with PowerTable Feed and Anilam® 3-Axis (Quill) DRO 9 x 49" 2,251 RB307-3690 10,806.98 9,179.95 10 x 54" 3,445 RB307-3692 12,436.98 10,569.95 Mill with PowerTable Feed and Anilam® 3-Axis (Knee) DRO 9 x 49" 2,251 RB619-2896 10,906.98 9,269.95 10 x 54" 3,445 RB619-2895 12,536.98 10,599.95 1 year limited warranty! Specifications 9" x 49" 10" x 54" Variable Speed: 70-4200 rpm 70-4200 rpm LongitudinalTravel: 35" w/o Power Feed 39" w/o Power Feed 3T-Slots: 5⁄8" x 11⁄4 5⁄8" x 11⁄4 Saddle CrossTravel: 12" 16.5" KneeTravel: 161⁄2" 173⁄4" Spindle/QuillTravel: 5" 5" SpindleTaper: R8 R8 Spindle Diameter: 3.375" 3.375" 3 Spindle Feeds (Inch/Rev.): .0015, .003, .006" .0015, .003, .006" Spindle toTable: 0-18 5⁄16" 0-20" Spindle to Column: 5-20" 7-26" Head Swivel, w/Locks RH/LH: 90°/90° 90°/90° HeadTilt-Forward & Back: 45°/45° 45°/45° RamTurret Swivel: 360° 360° RamTravel: 12" 18" Motor & Electrics: 3 hp, 220/440v, 3 ph. 3 hp, 220/440v, 3 ph. Machine Dimensions: 85H x 59W x 55"L 88H x 72W x 66"L Machine Base Dimensions: 371⁄2 x 24" 43 x 24" Floor Space Required (Max.): 140W x 70"D 150W x 94"D Starting At $ 7,100 SAVEUP TO $ 1,764 RB890-9198 shown 9" x 42", 9" x 49" & 10" x 54" Variable Speed Vertical Mills • Head tilts 90° right/left, 45° forward/back • Precision Y-axis, leadscrew-bearing hub with a maximum .005" deviation to Y-axis centerline, giving fluid in/out motion to the saddle • Precision squareness of table surface to the guideway; .00078"/12" travel • Turret swivels 360° • Parallelism of table surface to longitudinal movement; .00078"/12" travel • R8 spindle taper • 3 T-slots: 5⁄8" • 3.375" spindle dia. • 3 spindle feeds: .0015, .003, .006" • 0-18" spindle to table • Backlash adjustment • One-shot lubrication to table and saddle; gravity feed lubricator for spindle • Drawbar and tool kit Wt. Reg. Sale Size Lbs. Model # Price Price Mill Only 9 x 42" Step Pulley 2,400 RB100-1527 $6,859.98 $5,829.95 9 x 49"Variable Speed 2,650 RB100-1599 7,558.98 6,575.00 10 x 54"Variable Speed 2,840 RB100-1588 9,173.98 8,256.00 All Packages Include Installed Enco 150 In./Lb. Torque PowerTable FeedVertical Mill Packages 9 x 42" Step Pulley 2,415 RB505-6781 7,159.98 5,995.95 9 x 49"Variable Speed 2,665 RB505-6790 7,858.98 6,679.95 10 x 54"Variable Speed 2,855 RB505-6796 9,473.98 7,996.95 Mill with Enco 150 in./lbs.Torque PowerTable Feed and ACU-RITE® VUE 2-Axis DRO System Installed 9 x 42" Step Pulley 2,435 RB890-9181 8,359.98 6,595.95 9 x 49"Variable Speed 2,690 RB890-9190 9,058.98 7,879.00 10 x 54"Variable Speed 2,836 RB890-9196 10,673.98 9,600.00 Mill with Enco 150 in./lbs.Torque PowerTable Feed and ACU-RITE® VUE 3-Axis (Quill) DRO System Installed 9 x 42" Step Pulley 2,440 RB890-9182 8,759.98 7,139.95 9 x 49"Variable Speed 2,695 RB890-9191 9,458.98 8,229.00 10 x 54"Variable Speed 2,891 RB890-9197 11,073.98 9,965.00 Mill with Enco 150 in./lbs.Torque PowerTable Feed and ACU-RITE® VUE 3-Axis (Knee) DRO System 9 x 42" Step Pulley 2,440 RB890-9183 8,809.98 7,395.95 9 x 49"Variable Speed 2,695 RB890-9192 9,508.98 8,269.00 10 x 54"Variable Speed 2,891 RB890-9198 11,123.98 9,999.00 Starting At $ 5,82995 1-YEAR LIMITED WARRANTY Specifications 9" x 42"/9" x 49" 10" x 54" Speeds: 80-4800 rpm - Step Pulley 78-4200 rpm LongitudinalTravel: 30" - Step Pulley 38.5" Saddle CrossTravel: 13.5" 17" KneeTravel: 16" 17.5" Spindle/QuillTravel: 5" 5.1" Spindle to Column: 5.5-20" 4.5-20" RamTravel: 14.5" 19" Motor & Electrics: 2 hp, 220v, 3 ph. 3 hp, 220/400v, 3 ph. Machine Dimensions: 85 x 71 x 74" 841⁄2 x 72 x 75" 22-23 EH 13-07 M&MD.indd 2222-23 EH 13-07 M&MD.indd 22 6/19/13 11:30 AM6/19/13 11:30 AM
  23. 23. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 23 you select the Right Machine! Mill/Drills RB404-0079 shown 20" Square Column Mill/Drills Starting At $ 1,99595 Specifications Table Size: 91⁄2 x 311⁄2" 6 Spindle Speeds: 120, 210, 345, 670, 1180, 1970 rpm Capacity: Drilling Steel: 19⁄16" Drilling Cast Iron: 13⁄4" End Mill: 11⁄4" Face Mill: 31⁄8" TableTravel (Longitudinal): 22" CrossTableTravel: 8" 4T-Slots: 1⁄2"W Spindle QuillTravel: 43⁄4" SpindleTaper: R8 Spindle/Quill Dia.: 3" Spindle toTable (Max): 183⁄4" HeadTilt: 90° L, 90° R Motor & Electrics: 2 hp, 220v, 1 ph. Prewired: 220v, 1 ph. Machine Dimensions: 421⁄2W x 28D x 57"H Max.floor space req.: 771⁄8W x 311⁄2"D 1-YEAR LIMITED WARRANTY Wt. Reg. Sale Description Lbs. Model # Price Price Mill/Drill Only 662 RB404-0045 $2,419.98 $1,995.95 Mill/Drill with Stand 810 RB404-0077 2,718.98 2,195.95 Mill/Drill with Stand and Installed Enco PowerTable Feed 841 RB404-0078 3,118.98 2,595.95 Mill/Drill with Stand, Installed Enco PowerTable Feed and ACU-RITEVUE® 2-Axis DRO 845 RB404-0079 4,318.98 3,595.95 • Head tilts left and right • 6-speed geared head • Dovetail column ways • Quick spindle changes with quick select gearshift, no belts to change SAVEUP TO $ 723 • Face Mill with Arbor • Drill Chuck Arbor • Drill Chuck & Key Standard Equipment SAVEUP TO $ 904 • Forward and reversing switch for tapping • 360° head swivel 163⁄8" Mill/Drills • Drill Chuck with Key • Drill Chuck Arbor • 52 Pc. Clamping Kit • Shell Mill Arbor • Angle Drill Press Vise • Face Mill Standard Equipment Specifications Speeds: 150-3000 rpm Swing: 163⁄8" Long.TableTravel: 17" TableWork Surface Area: 81⁄4 x 281⁄2" CrossTableTravel: 71⁄4" Capacity: Drilling Steel: 11⁄4" Drilling Cast Iron: 11⁄2" End Mill/Face Mill: 3⁄4"/3" 4T-Slots: 5⁄8" Spindle/QuillTravel: 5"* SpindleTaper: R8 Spindle toTable (Max.): 18" Spindle to Column (Max.): 65⁄8" Spindle/Quill Dia.: 3" Motor & Electrics: 11⁄2 hp, 110/220v, 1 ph. Machine Dimensions: 431⁄2H x 38W x 36"D Floor Space (Max.): 62W x 50"D * 4" with power downfeed 1-YEAR LIMITED WARRANTY Starting At $ 1,99595 With Power Downfeed Wt. Reg. Sale Description Lbs. Model # Price Price Mill/Drill Only w/Power Downfeed 690 RB105-1300 $2,322.30 $1,995.95 Mill/Drill with Cabinet Stand with Chip Pan w/Power Downfeed 775 RB105-1298 2,509.98 2,249.95 Mill/Drill with 2-Axis ACU-RITE® VUE DRO, Enco PowerTable Feed, Cabinet Stand w/Power Downfeed 785 RB240-7154 4,099.98 3,279.95 Mill/Drill with 3-Axis ACU-RITE® VUE DRO, Enco PowerTable Feed and Cabinet Stand with Chip Pan w/Power Downfeed 818 RB240-7157 4,499.98 3,595.95 22-23 EH 13-07 M&MD.indd 2322-23 EH 13-07 M&MD.indd 23 6/19/13 11:31 AM6/19/13 11:31 AM
  24. 24. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE24 Machinery ManualsLathes • Headstock with tapered roller bearings • Hardened and ground ways • Reversing switch • Inch dials • Reinforced cross ribs Wt. Reg. Sale Lbs. Model # Price Price Bench Lathe Only 250 RB893-1273 $1,295.98 $1,165.00 Bench Lathe with Cabinet Stand 328 RB308-0338 1,497.98 1,365.00 *Lathe is prewired for 110v,but can be wired for 220v Specifications Swing Over Bed: 9" Swing Over Cross Slide: 51⁄4" Distance Between Centers: 20" CarriageTravel: 16" longitudinal, 41⁄2" cross 2 Longitudinal Feeds: .005, .007" 27 InchThreads: 8-56 tpi 11 MetricThreads: .5-3mm Tailstock SpindleTravel: 1.57" (40mm) CompoundTravel: 2" TailstockTaper: 2 MT SpindleTaper: 3 MT Spindle Bore Dia.: .787" (20mm) Motor & Electrics: 3⁄4 hp, 110v*, 1 ph. 6 Spindle Speeds: 130-2000 rpm Machine Dimensions: 38L x 181⁄2W x 16"H Spindle Nose Mounting: 11⁄2-8" Quick-change gearbox for easier threading 9" x 20" Bench Lathes SAVEUP TO 10% 1-YEAR LIMITED WARRANTY Starting At $ 1,165 • 4" 3-Jaw Chuck • 7" 4-Jaw Chuck • Steady Rest • Follow Rest • Metric Change Gears • 7" Faceplate • 2 MT Dead Center • Threading Dial • Toolbox with Tools • 1⁄2" Capacity, 4-Way Tool Post Standard Equipment • Hardened and ground bed with reinforced cross ribs • Headstock with tapered roller bearings • Thread chasing dial • Easy speed changes • Splash lubrication in headstock • Removable gap block • 3-year warranty on DRO Wt. Reg. Sale Lbs. Model # Price Price Lathe ONLY 1,100 RB510-2585 $4,176.98 $3,759.00 Lathe with Cabinet Stand 1,345 RB510-2591 4,496.98 4,059.00 Lathe with Cabinet Stand with ACU-RITE® VUE 2-Axis DRO Installed 1,355 RB510-2592 5,876.98 5,189.00 Standard Equipment • 6" 3-Jaw Chuck • 7" 4-Jaw Chuck • Steady Rest • Follow Rest • 10" Faceplate • Chip Pan • 3 MT Dead Center • 11⁄16" Capacity • 4-Way Tool Post • Metric Change Gears • Threading Dial • Toolbox with Tools Specifications Swing Over Bed: 13" Cross-Slide Feed Range (Inch./Rev.): .0004-.0105" TableWork Surface Area: 13 x 40" CompoundTravel: 211⁄16" Swing Over Gap: 183⁄4" Tailstock SpindleTravel: 33⁄4" Length of Gap: 9" TailstockTaper: 3 MT Swing Over Cross Slide: 8" Spindle Nose Mounting: D1-4 Swing Over Compound: 3" Spindle Bore Dia.: 11⁄2" Distance Between Centers: 391⁄3" SpindleTaper: 5 MT CarriageTravel: 34" SpindleTaper with Sleeve: 3 MT Long.Feed Range (Inch./Rev.): .0011-.0311" 18 Spindle Speeds: 60-1500 rpm 40 InchThreads: 4-112 tpi Motor & Electrics: 11⁄2 hp, 220v, 1 ph. 29 MetricThreads: .25-4.5mm Machine Dimensions (w/o stand): 67L x 26W x 25"H Floor Space Required (Max.): 72L x 34"W 13" x 40" Geared Head Gap Bed Bench Lathes 18 Speeds, 60 to 1500 rpm SAVEUP TO $ 688 Starting At $ 3,759 1-YEAR LIMITED WARRANTY 24-25 EH 13-07 Lathes.indd 2424-25 EH 13-07 Lathes.indd 24 6/19/13 11:31 AM6/19/13 11:31 AM
  25. 25. PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 25 Online at use-enco.com Lathes Specifications 13" x 40" 14" x 40" Swing Over Bed: 13" 14" Swing Over Gap: 19" 20" Length of Gap: 93⁄8" 93⁄8" Swing Over Cross Slide: 7" 81⁄2" Swing Over Compound: 31⁄2" 31⁄2" CarriageTravel: 371⁄2" 371⁄4" Long.Feed Range (In./Rev.): .0012-.0294" .0012-.0294" 40 InchThreads: 4-112 tpi 4-112 tpi 22 MetricThreads: .45-7.5mm .45-7.5mm Cross-SlideTravel: 6" 6" Cross-Slide Feed Range: .0003-.0100" .0003-.0100" CompoundTravel: 31⁄2" 31⁄2" Tailstock SpindleTravel: 43⁄4" 43⁄4" TailstockTaper: 3 MT 3 MT Spindle Nose Mounting: D1-4 D1-4 Spindle Bore Dia.: 17⁄16" 17⁄16" SpindleTaper: 5 MT 5 MT Motor & Electrics: 3 hp, 220v 3 hp, 220v, 3 ph. Machine Dimensions: 713⁄4L x 31W x 455⁄8"H 713⁄4L x 31W x 491⁄8"H 13" x 40" & 14" x 40" Geared Head Gap Bed Engine Lathes 8 Speeds, 90 to 1800 rpm • Jog button for easy gear engagement and spindle inching • Quick speed changes • Splash lubrication in headstock • Totally enclosed gearbox • Hardened and ground bedways • Spindle with tapered roller bearings • 3-year warranty on DRO Shown with DRO Wt. Reg. Sale Description Lbs. Model # Price Price Engine Lathe ONLY 13" x 40" 1,940 RB319-9733 $5,998.98 $5,699.00 14" x 40" 1,940 RB308-0232 6,598.98 5,939.00 Engine Lathe with ACU-RITE® VUE 2-Axis DRO Installed 13" x 40" 1,976 RB319-9734 7,498.98 6,749.00 14" x 40" 1,976 RB308-0235 8,098.98 7,289.00 1-YEAR LIMITED WARRANTY SAVEUP TO $ 809 Starting At $ 5,699 • 4-Way Tool Post • Backplate • Steady and Follow Rests • Chip Pan • 12" Faceplate • Coolant System • Live and Dead Centers • Foot Brake • Splashguard • 6" 3-Jaw and 8" 4-Jaw Chucks Standard Equipment SAVEUP TO $ 901 Wt. Reg. Sale Description Lbs. Model # Price Price Bench Lathe Only 1,100 RB328-6153 $5,610.25 $5,049.95 Bench Lathe with Cabinet Stand 1,270 RB328-6135 6,096.98 5,495.95 Bench Lathe with ACU-RITE® VUE 2-Axis DRO System Installed and Cabinet Stand 1,320 RB328-6134 7,496.98 6,595.95 • 6" 3-Jaw Chuck • 8" 4-Jaw Chuck • 10" Faceplate • Steady Rest • Follow Rest • 3 MT Dead Center • 4-Way Tool Post • Chip Pan • Toolbox • Threading Dial Standard Equipment 14" x 40" Geared Head Gap Bed Bench Lathes Features: • Full-length splashguard • 2 hp, 220v, 1-ph. motor • Bed is hardened and ground with reinforced cross ribs • D1-4 camlock spindle • 3-year warranty on DRO Specifications Swing Over Bed: 14" Swing Over Cross Slide: 8" Distance Between Centers: 40" Swing Over Gap: 20" Spindle BoreTaper: 5 MT CenterTaper: 3 MT 18 Spindle Speeds: 70-1500 rpm Longitudinal Feeds: .002-.024" Cross Feeds: .001-.012" 40 InchThreads: 4-112 tpi 22 MetricThreads: .25-6mm Cross-SlideTravel: 6" Tailstock SpindleTravel: 4" CenterTaper: 3 MT BedWidth: 71⁄8" GapWidth: 8" 1yearlimitedwarranty! As Low As $ 5,04995 24-25 EH 13-07 Lathes.indd 2524-25 EH 13-07 Lathes.indd 25 6/19/13 11:32 AM6/19/13 11:32 AM
  26. 26. The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE26 Shop the 2013 Enco Master CatalogEnd Mills Surface Treatment: TiN (Titanium Nitride) • General-purpose use • Extends tool life • Used for aggressive machining of steels • Requires increase of 25 to 30% in machining speeds vs. HSS Regular Length - 30° Helix 2 Flute HSS TiN Coated Single End Mills Mill Shank Flute Low Dia. Dia. Length OAL Model # Price 1⁄8" 3⁄8" 3⁄8" 25⁄16" RB337-5060 $8.24 3⁄16 3⁄8 7⁄16 25⁄16 RB337-5061 8.24 1⁄4 3⁄8 1⁄2 27⁄16 RB337-5062 8.24 5⁄16 3⁄8 9⁄16 25⁄16 RB337-5063 8.24 3⁄8 3⁄8 9⁄16 25⁄16 RB337-5064 8.24 7⁄16 3⁄8 13⁄16 21⁄2 RB337-5065 11.57 1⁄2 1⁄2 1 3 RB337-5067 11.98 9⁄16 1⁄2 11⁄8 31⁄8 RB337-5068 14.39 5⁄8 1⁄2 11⁄8 31⁄8 RB337-5069 16.13 5⁄8 5⁄8 15⁄16 37⁄16 RB337-5070 16.79 11⁄16 1⁄2 15⁄16 35⁄16 RB337-5071 17.11 3⁄4 1⁄2 15⁄16 35⁄16 RB337-5072 18.97 3⁄4 3⁄4 15⁄16 39⁄16 RB337-5074 18.97 13⁄16 3⁄4 11⁄2 33⁄4 RB337-5075 27.50 7⁄8 5⁄8 11⁄2 35⁄8 RB337-5076 27.01 7⁄8 7⁄8 11⁄2 33⁄4 RB337-5078 23.84 15⁄16 5⁄8 11⁄2 35⁄8 RB337-5079 24.09 1 5⁄8 11⁄2 35⁄8 RB337-5080 31.43 1 3⁄4 11⁄2 33⁄4 RB337-5081 31.43 1 1 15⁄8 41⁄8 RB337-5082 36.75 11⁄8 3⁄4 11⁄2 33⁄4 RB337-5083 40.48 Starting At $ 824 • General-purpose use • 30° Helix • Used for aggressive machining of steels • Requires increase of 25 to 30% in machining speeds vs. HSS Surface Treatment: TiN (Titanium Nitride) Regular Length 2 Flute HSS TiN Coated Double End Mills Mill Shank Flute Interstate Reg. Sale Hertel Low Dia. Dia. Length OAL Model # Price Price Model # Price 1⁄8" 3⁄8" 3⁄8" 31⁄8" — RB337-5280 $11.48 5⁄32 3⁄8 7⁄16 31⁄8 RB328-0798 $10.23 $8.95 — 3⁄16 3⁄8 7⁄16 31⁄8 RB326-0858 9.67 7.95 RB337-5282 11.48 7⁄32 3⁄8 1⁄2 31⁄8 RB328-0799 10.23 8.95 RB337-5283 12.14 1⁄4 3⁄8 1⁄2 31⁄8 RB326-0859 9.80 7.95 RB337-5284 11.64 9⁄32 3⁄8 9⁄16 31⁄8 — RB337-5285 12.23 5⁄16 3⁄8 9⁄16 31⁄8 RB326-0860 9.67 7.95 RB337-5286 11.48 11⁄32 3⁄8 9⁄16 31⁄8 RB319-2292 10.23 8.95 — 11⁄32 1⁄2 9⁄16 31⁄8 — RB337-5287 12.14 3⁄8 3⁄8 9⁄16 31⁄8 RB326-0861 9.80 7.95 RB337-5288 11.64 13⁄32 1⁄2 13⁄16 33⁄4 — RB337-5289 18.46 7⁄16 1⁄2 13⁄16 33⁄4 RB326-0862 14.78 12.95 RB337-5290 17.54 1⁄2 1⁄2 13⁄16 33⁄4 RB326-0863 14.78 12.95 RB337-9144 17.54 9⁄16 5⁄8 11⁄8 41⁄2 RB326-0864 20.94 17.95 RB337-5293 24.86 5⁄8 5⁄8 11⁄8 41⁄2 RB326-0865 20.45 17.95 RB337-5294 24.29 3⁄4 3⁄4 15⁄16 5 RB326-0866 25.85 22.95 — 7⁄8 7⁄8 19⁄16 51⁄2 RB328-0800 32.51 27.95 RB337-5296 38.59 1 1 15⁄8 57⁄8 RB328-0801 40.00 34.95 RB337-5297 47.48 SAVEUP TO 20% Starting At $ 795 As Low As $ 377 SAVE 30%On 12+ Carbide-Tipped Tool Bits Ind. AL AR Sale Price Ea. Size No. Model # Model # 1-11 12+ C2 1⁄4" 4 RB383-7140 RB383-7100 $5.39 $3.77 5⁄16 5 RB383-7144 RB383-7104 5.90 4.13 3⁄8 6 RB383-7148 RB383-7108 5.90 4.13 1⁄2 8 RB383-7156 RB383-7116 6.63 4.64 5⁄8 10 RB383-7160 RB383-7120 11.04 7.62 3⁄4 12 RB383-7164 RB383-7124 13.56 9.49 C5 1⁄4 4 RB383-7142 RB383-7102 5.39 3.77 5⁄16 5 RB383-7146 RB383-7106 5.90 4.13 3⁄8 6 RB383-7150 RB383-7110 5.90 4.13 1⁄2 8 RB383-7158 RB383-7118 6.63 4.64 5⁄8 10 RB383-7162 RB383-7122 10.88 7.62 3⁄4 12 RB383-7166 RB383-7126 13.56 9.49 • C2 grade for cast iron and nonferrous materials • C5 grade for steel and steel alloys Style AL • Cuts from left to right • Left hand for turning to a square shoulder Style AR • Cuts from right to left • Right hand for turning to a square shoulder Each Qty.: 12+ Simply text Encotools and your email address to 77053 to sign up for Special Offers. Msg & Data rates may apply. Email subscription only. Text to Join To: 77053 Encotools your email address 26-27 EH 13-07 EM.indd 2626-27 EH 13-07 EM.indd 26 6/19/13 11:33 AM6/19/13 11:33 AM

×