Data Sheet No. EZtouch_Panels_Spec_SheetEZcall™ EnterpriseEZtouch™ – Color Touch-Screen PanelsDescriptionThe EZtouch™ panels are a user-friendly wall-mounted touch-screen panel that provide configurable alarm buttons andalarm display capabilities. EZtouch™ panels are available as PoE powered Ethernet devices and RS485 serial devices toallow multiple cabling configurations to be used. Each EZtouch™ panel supports from zero to 40 call buttons and mayalso be configured with an alarm display and/or door control & monitoring. Every EZtouch™ panel networks to an EZcall™TPH (Touch Panel Host) over a standard Ethernet LAN/WAN network using the TCP/IP protocol or through an RS485 seriallink. A single EZcall™ TPH will support up to 100,000 supervised EZtouch™ panel connections on a single system.Watchdog signals are used between the TPH and all EZtouch™ panels to ensure reliable supervised communications.EZtouch™ panels are available in two sizes; 2.8” display and 4.3” display. EZtouch™ panels are water-resistant with anIP65 rating and may be cleaned using standard cleaners. All EZtouch™ panels are designed to mount in industry-standard North American electrical boxes and also have weatherproof surface-mount backboxes available for outdoormounting. These cost effective touch panels provide an attractive and cost effective alarm initiation or display device thatmay be used virtually anywhere. EZtouch™ panels may be used as alarm initiation devices, to display alarms at strategiclocations or as workflow control devices. With EZtouch panels, you are free to select which buttons you need at alllocations and can add/remove buttons as required.Features • Intuitive user-friendly call buttons • Timeout digital clock display helps reduce light emission during evenings. • Supervised connection alerts EZcall™ whenever a panel is disconnected or offline • PoE powered Ethernet and RS485 models available • Ethernet and RS485 models may be intermixed on a single TPH • Fully configurable and customizable buttons with icons • Alarm display (optional) • Door monitoring and control display (optional) • Integrated clean-screen option allows the screen to be cleaned • Quick and easy to setup • ESD Protection to 4kV • Wide operating temperature range from -20°C ~ 70°C • IP65 Waterproof front panel • Built-in alarm sounder (speaker on the EZ-TP43 models) • Very low power consumption (<2.5W) • 5-Year warrantySystem RequirementsEZcall™ TPH Touch Panel Host12VDC power supply (RS485 models)IEEE 802.3af class 1 PoE network switch (Ethernet models)Specifications subject to change without notice. Copyright 2010 – QBsoft Solutions All trademarks, and trade names shown here are the property of their relative owners.
Physical CharacteristicsEZ-TP28 panels have a 2.8” TFT LCD color touch-screen display. EZ-TP28E is a PoE powered Ethernet model and the EZ-TP28S is an RS485 serially networked (up to 31 per loop) model. EZ-TP28S dimensions are similar to EZ-TP28E.EZ-TP43S panels hand a 4/3” TFT LCD color touch-screen display and are networked with an RS485 loop (up to 31).Specifications EZ-TP28 mounts to standard 1-gang electrical box 1939 144 Street th Surrey, BC V4A 7M7 T. 604.812.SOFT (7638) E. firstname.lastname@example.org W. www.qbsoft.caSpecifications subject to change without notice. Copyright 2010 – QBsoft Solutions