Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

IRONCLAD Perimeter Intrusion Detection System - Fence Alarm System

633 views

Published on

The IRONCLAD is a fence protection sensor cable.
The reason RBtec calls it “Perimeter Security Made Easy, Reliable and Affordable” is that fence sensors were known for being complicated, tailor made, unreliable and very expensive.
With the IRONCLAD none of these is accurate.

The IRONCLAD is unique in a way that it’s not just another fence sensor, the IRONCLAD was designed to be user friendly so anyone without prior knowledge can install it successfully.
The IRONCLAD replaces unreliable Infrared motion sensors and photoelectric beams.
The IRONCLAD is not a whole system usually but a smart sensor that connects to ANY burglar alarm or camera system.

RBtec sell it to wide variety of customers that need perimeter protection, commercial and industrial as well.
The system can be mounted on any metallic fence even with privacy slates, PVC or vinyl coated fence.

The IRONCLAD is:
• Plug and Deploy - Ready for installation affordable kits.
• No training or special tools needed, comes with installation manual
• Standalone – no software or computer needed
• No calibration - The system self-calibrates
• No Conduit needed – simple and fast to install and maintain.
• 22 Levels of sensitivity per zone easily adjusted with dip switches.
• 3 Layers of False Alarm Filtration - Extreme low false alarm rate especially with weather station unit.
• Protects fences up 10ft with a single run of cable – does not need 2 runs of cable like other systems.
• Maintenance free - 2 years warranty on the sensor cable.
• Optional weather station, stainless steel twist ties

The IRONCLAD Perimeter Alarm System Is the ideal solution for protecting:
• Commercial and Industrial areas – RV/Boat Storage, Self-storage, Grow ops, Scrap yards, Factories, Truck/Bus yards.
• Water, Electrical and Utility substations, valve station, pump station.
• Solar farms and Photovoltaic power plants.
• Radio, Cellular, Communication antennas.
• Oil and gas facilities of all kinds.
• High end residential.
• Any fenced location.

Published in: Technology

IRONCLAD Perimeter Intrusion Detection System - Fence Alarm System

  1. 1. IRONCLAD FENCE ALARM SYSTEM Fence sensors are no longer complicated, tailor made, unreliable and expensive.
  2. 2. IRONCLAD – FENCE ALARM SYSTEM The Ideal Solution Against Intruders Alarm zone 1
  3. 3. The sensor cable protects the full height of the fence up to 12ft/3.5m. SYSTEM DESCRIPTION Power Supply 12-24Vdc The Ironclad is a sensor cable that is attached to the fence to detect any cutting, climbing, lifting or jumping off the fence. Each processor can monitor up to 2 zones with 2 separate relay output per zone, the zones are sold pre-cut in 250'/500'/1000' (75m/152m/305m). The system designed to connect to any alarm system and is able to retrofit to old or new burglar alarms /DVR/NVR/ SCADA systems. Fully wrapped by stainless steel braid the Ironclad is Ideal for installation on wire fences, razor wires and concertina coil. The system utilizes 3 layers of false alarm filtration - Algorithm of detection based on the frequency of vibrations detecting only vibrations associated with intrusion, 22 levels of sensitivity easily adjusted with dip switches and a weather station to avoid false alarms caused by weather condition.
  4. 4. Potential Customers  Commercial and Industrial areas – RV/Boat Storage, Self-storage, Grow ops, Scrap yards, Factories, Truck/Bus yards.  Water, Electrical and Utility substations, valve station, pump station.  Solar farms and Photovoltaic power plants.  Radio, Cellular, Communication antennas.  Oil and gas facilities of all kinds.  High end residential.  Any fenced location. System advantage • The IRONCLAD system complements any alarm system, as well as integrates with CCTV camera system. • The IRONCLAD sensor is unique in its ability to protect the areas surrounding the site where there is high or thick vegetation that does not allow installation of line of sight detector (Beams, PIR). • The sensor cable is armored and protected from small animals bite or tear due to continuous friction. • Ideal for installation on chain link fences or concertina coils. Features • Plug and Deploy - Ready for installation affordable kits. • No training or special tools needed, comes with installation manual • Standalone – no software or computer needed • No calibration - The system self-calibrates • No Conduit needed – simple and fast to install and maintain. • 22 Levels of sensitivity per zone easily adjusted with dip switches. • 3 Layers of False Alarm Filtration - Extreme low false alarm rate especially with weather station unit. • Protects fences up 10ft with a single run of cable – does not need 2 runs of cable like other systems. • Maintenance free - 2 years warranty on the sensor cable. • Optional weather station, stainless steel twist ties ADVANTAGES AND FEATURES The easiest and most reliable fence sensor cable you ever installed!
  5. 5. YOU CAN MIX & MATCH (ONE ZONE KIT + ONE SPOOL) EXAMPLES STANDARD KITS
  6. 6. IRONCLAD PACKAGING PER KIT LPU-304 Analyzer/Process or Wooden spool of sensor cable
  7. 7. End of Line 4 - Connect to relay outputs of the analyzer to the alarm panel. EASY AND SIMPLE TO INSTALL 3 - Hard wire connect the sensor cable to the processor 2 - Attach the cable to the fence with stainless steel cable-ties 1 - First place the End of Line unit at the end of the zone.
  8. 8. LPU-304 FOR ONE OR TWO ZONES IRONCLA D Inputs IRONCLA D Relay outputs Easily adjusted sensitivity
  9. 9.  What does the kit include? The Ironclad Kit includes at least one spool of sensor cable in the length of choice, End line resistor pre-installed on the cable and LPU304 (The analyzer/processor) in a weatherproof enclosure. Stainless steel ties, Weather station, Gate connector, Gate kit and other accessories are optional and needed to be added separately.  Where to do I connect the Ironclad system? Each analyzer has 2 dry contact relay outputs NO/NC, those outputs can be connected to ANY alarm system, CCTV system or any other system that can accept dry contact input such as sirens, strobe lights and even fire alarms.  How much fence can i cover with the Ironclad sensor? The Ironclad sensor cable comes in spools of 250ft (75m), 500ft (150m) and 1000ft (300m). Each Analyzer can monitor up to 2 zones which mean the largest perimeter that can be covered with 1 kit is 2000ft (600m). In order to cover larger perimeter kits can be combined to cover the whole fence line.  Can the sensitivity of the sensor be adjusted? Sure! The system has 22 levels of sensitivity that can be adjusted easily with dip switches. No need for tools, software, laptop or any knowledge.  Does the system needs any calibration before I can use it? No, the Ironclad system self-calibrated. The system is a plug and play system, it requires power, sensor inputs and relay outputs and it’s working!  Does wind or rain can cause false alarms? The way the Ironclad system works: It detects only sharp frequency vibrations that are generated by cutting, climbing or jumping the fence. Vibration cause by the wind, rain and small animals are usually long wave vibrations that would not be picked up by the system. It's the difference between tapping/shaking the fence which will get detected to pushing on the fence like the wind that won't. On top of that, we have an optional weather station that is able to feed the analyzer with real-time information about the weather around it and compensate for the wind and rain to give an even higher level of assurance of filtering out false alarms. FREQUENTLY ASKED QUESTIONS
  10. 10.  Does the weather station lower the sensitivity to avoid false alarms? No, the weather station adds another variable into the algorithm of detection that helps the system ignore wind noise better. It does NOT lower the sensitivity to avoid false alarms..  Can the cable be shortened/cut/spliced? Yes, the cable can be cut to size. From the factory one end of the cable comes with the end of line resistor installed on but on the other it's open and can be cut to fit the fence length.  Can the cable be installed on Swing gates? On swing gates there are 2 options: 1. Using gate connector (sold separately), the connector will be connected to the cable at the opening point to allow the gate to be opened or closed. It's not recommended to use this connected on often used gates. 2. Looping the cable on each side of the gate and bypassing under it in a conduit.  Do we need to change to another cable to bypass a gate? If you would like to by pass the gate completely and not using RBtec gate connector than no. As long as the conduit is waterproof the sensor cable can be put into the conduit directly and by pass the gate and continue on the fence line on the other side.  If the cable is cut can it repaired? Yes! Repairing the cable is a 30 second process, RBtec offers a repair kit that bridges the cut in a weatherproof method to maintain the system performance. The repair box is installed at the cut point, the sensor cable connects into screw terminals on both sides of the repair box and the system is back up and running. FREQUENTLY ASKED QUESTIONS
  11. 11. INSTALLATIONS ON DIFFERENT FENCES
  12. 12. INSTALLATIONS ON DIFFERENT FENCES
  13. 13. DIFFERENT APPLICATIONS
  14. 14. DIFFERENT CLIMATES
  15. 15. The meteorological unit screens extreme weather changes and minimizes false alarms WEATHER STATION
  16. 16. THANK YOU!THANK YOU! All images are for illustration only THANK YOU! This document has been written and produced by RBtec to provide the reader with as much technical and other information as possible about RBtec its products and its services. Copying any of its contents without prior permission from RBtec is strictly prohibited. This information is provided for the purpose of initial evaluation of RBtec's products and services. In keeping with RBtec's policy of continuous development, RBtec Ltd. reserves the right to alter these specifications without notice.

×