SlideShare a Scribd company logo
1 of 10
Download to read offline
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
ALPHA BIM
The plugin support Revit user
FORMWORK
AREA
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
1. Description
Formwork Area add-in is designed for calculating the formwork area for structure
element, include Foundation, Column, Framing, Floor, Wall, and Generic Model.
This is an effective add-in for Quantity Takeoff the Formwork Area in Revit, a 3D BIM
Model-Based Estimating solution.
After you create a structural BIM model in Revit, this add-in will help you calculate the
formwork area for each member and save the calculated values in Shared Parameters.
You can see manual video from part 1 to part 5 to cleanly about features of this add-in:
http://bit.ly/3qMPMDI
Version Number: 1.0
Compatible with Autodesk Revit, version: 2022, 2021, 2020, 2019, 2018
This is the location of Formwork Area add-in:
2. User manual
The interface of Formwork Area add-in as below:
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
Check out to get video manual: http://bit.ly/3qMPMDI
Formwork Area add-in will calculate the formwork area for select structure elements.
You have two way to select elements:
1. Select elements then run add-in.
2. Run add-in then setup options then select elements to calculate.
Here is the detailed guide:
• SCOPE CALCULATE:
✓ Choose Element Category: Choose the category that you want to calculate the
Formwork Area, include: Structure Foundation, Structure Column, Structure
Framing, Structure Floor, Structure Wall, and Generic Model.
✓ Scope elements for calculating intersect: The scope of elements used to
calculate the intersect area with each element is calculated Formwork Area.
• SETTING:
✓ Formwork Wall:
❖ Calculate bottom faces of Openning: Checked to allow calculate the area
of bottom faces of Wall Opening.
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
✓ Formwork Framing:
❖ Calculate area bottom: Checked to allow calculate the area of bottom
faces of Framing.
✓ Formwork Floor:
❖ Calculate area bottom: Checked to allow calculate the area of bottom
faces of Floor.
❖ Subtract bottom with Framing: Checked to allow subtract the bottom area of
Floor that intersect with Framing.
❖ Subtract bottom with Foundation: Checked to allow subtract the bottom area of
Floor that intersect with Foundation.
❖ Subtract bottom with Floor/Wall/Column/Generic Model: Checked to allow
subtract the bottom area of Floor that intersect with Floor/Wall/Column/Generic
Model.
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
After the settings, click the OK button to calculate the Formwork Area for the elements in the
selected scope.
Explain the calculation result:
Calculation results are stored in the Shared Parameter. These Shared Parameters are created
automatically by this Add-in on the first run.
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
Explain the calculation result for Structural Foundation:
FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area.
FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still
use this element when calculating the area of intersection of the other elements with it.
ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with
other elements.
FW.Foun.Sides: The total area of the surrounding faces of the Foundation.
FW.Foun.SubFoun: The total area intersects with other Foundations.
FW.Foun.SubBeam: The total area intersects with Framings.
FW.Foun.SubCol: The total area intersects with Columns.
FW.Foun.SubWall: The total area intersects with Walls.
FW.Foun.SubFloor: The total area intersects with Floors.
FW.Foun.SubGeneric: The total area intersects with Generic Models.
ALB_FormworkArea
= FW.Foun.Sides - FW.Foun.SubFoun - FW.Foun.SubBeam - FW.Foun.SubCol - FW.Foun.SubWall -
FW.Foun.SubFloor - FW.Foun.SubGeneric
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
Explain the calculation result for Structural Column:
FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area.
FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still
use this element when calculating the area of intersection of the other elements with it.
ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with
other elements.
FW.Col.Sides: The total area of the surrounding faces of the Column.
FW.Col.SubFoun: The total area intersects with Foundations.
FW.Col.SubBeam: The total area intersects with Framings.
FW.Col.SubCol: The total area intersects with other Columns.
FW.Col.SubWall: The total area intersects with Walls.
FW.Col.SubFloor: The total area intersects with Floors.
FW.Col.SubGeneric: The total area intersects with Generic Models.
ALB_FormworkArea
= FW.Col.Sides – FW.Col.SubFoun - FW.Col.SubBeam - FW.Col.SubCol - FW.Col.SubWall -
FW.Col.SubFloor - FW.Col.SubGeneric
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
Explain the calculation result for Structural Wall:
FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area.
FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still
use this element when calculating the area of intersection of the other elements with it.
ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with
other elements.
FW.Wall.Total: The total area of the surrounding faces of the Wall plus the total area of the bottom
surface of Wall Opening (if calculation is included).
FW.Wall.SubFoun: The total area intersects with Foundations.
FW.Wall.SubBeam: The total area intersects with Framings.
FW.Wall.SubCol: The total area intersects with Columns.
FW.Wall.SubWall: The total area intersects with other Walls.
FW.Wall.SubFloor: The total area intersects with Floors.
FW.Wall.SubGeneric: The total area intersects with Generic Models.
ALB_FormworkArea
= FW.Wall.Total – FW.Wall.SubFoun - FW.Wall.SubBeam - FW.Wall.SubCol - FW.Wall.SubWall -
FW.Wall.SubFloor - FW.Wall.SubGeneric
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
Explain the calculation result for Structural Framing:
FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area.
FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still
use this element when calculating the area of intersection of the other elements with it.
ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with
other elements.
FW.Beam.Total: The total area of the surrounding faces of the Framing plus the total area of the
bottom surface (if calculation is included).
FW.Beam.Bottom: The total area of bottom faces of Framing.
FW.Beam.SubFoun: The total area intersects with Foundations.
FW.Beam.SubBeam: The total area intersects with other Framings.
FW.Beam.SubCol: The total area intersects with Columns.
FW.Beam.SubWall: The total area intersects with Walls.
FW.Beam.SubFloor: The total area intersects with Floors.
FW.Beam.SubGeneric: The total area intersects with Generic Models.
ALB_FormworkArea
= FW.Beam.Total – FW.Beam.SubFoun - FW.Beam.SubBeam - FW.Beam.SubCol -
FW.Beam.SubWall - FW.Beam.SubFloor - FW.Beam.SubGeneric
FORMWORK AREA
Alpha BIM – Lead on Trust https://alphabimvn.com
Explain the calculation result for Structural Floor:
FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area.
FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still
use this element when calculating the area of intersection of the other elements with it.
ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with
other elements.
FW.Floor.Bottom: The total area of bottom faces of Floor.
FW.Floor.Sides: The total area of the surrounding faces of the Floor.
FW.Floor.SubFoun: The total area intersects with Foundations.
FW.Floor.SubBeam: The total area intersects with Framings.
FW.Floor.SubCol: The total area intersects with Columns.
FW.Floor.SubWall: The total area intersects with Walls.
FW.Floor.SubFloor: The total area intersects with other Floors.
FW.Floor.SubGeneric: The total area intersects with Generic Models.
ALB_FormworkArea = FW.Floor.Bottom + FW.Floor.Sides - FW.Floor.SubFoun - FW.Floor.SubBeam
- FW.Floor.SubCol - FW.Floor.SubWall - FW.Floor.SubFloor - FW.Floor.SubGeneric

More Related Content

What's hot

Presentación legislación urb. (2)
Presentación legislación urb. (2)Presentación legislación urb. (2)
Presentación legislación urb. (2)FUCN
 
72. bien phap thi cong coc khan nhoi
72. bien phap thi cong coc khan nhoi72. bien phap thi cong coc khan nhoi
72. bien phap thi cong coc khan nhoitrunghieu171
 
XREF TRONG AUTOCAD - Phan Minh Tan
XREF TRONG AUTOCAD - Phan Minh TanXREF TRONG AUTOCAD - Phan Minh Tan
XREF TRONG AUTOCAD - Phan Minh TanPhan Minh Tân
 
[Revit] Biện pháp thi công về Cầu đường
[Revit] Biện pháp thi công về Cầu đường[Revit] Biện pháp thi công về Cầu đường
[Revit] Biện pháp thi công về Cầu đườngHuytraining
 
Báo cáo thực tập vật liệu xây dựng
Báo cáo thực tập vật liệu xây dựng Báo cáo thực tập vật liệu xây dựng
Báo cáo thực tập vật liệu xây dựng Phước Nguyễn
 
Tải trọng Gió theo TCVN 2737:2020
Tải trọng Gió theo TCVN 2737:2020Tải trọng Gió theo TCVN 2737:2020
Tải trọng Gió theo TCVN 2737:2020Hồ Việt Hùng
 
De cuong tn 17
De cuong tn 17De cuong tn 17
De cuong tn 17GTVT
 
Quy trình sản xuất cọc bê tông cốt thép đúc sẵn
Quy trình sản xuất cọc bê tông cốt thép đúc sẵnQuy trình sản xuất cọc bê tông cốt thép đúc sẵn
Quy trình sản xuất cọc bê tông cốt thép đúc sẵnviethoang89
 
đồ án tốt nghiệp xây dựng dân dụng
đồ án tốt nghiệp xây dựng dân dụngđồ án tốt nghiệp xây dựng dân dụng
đồ án tốt nghiệp xây dựng dân dụngtuanthanhgtvt
 
1 tầng hầm, 1 tầng trệt, 10 tầng lầu, 1 tầng mái. TS. Lưu Trường Văn
1 tầng hầm, 1 tầng trệt, 10 tầng lầu, 1 tầng mái. TS. Lưu Trường Văn1 tầng hầm, 1 tầng trệt, 10 tầng lầu, 1 tầng mái. TS. Lưu Trường Văn
1 tầng hầm, 1 tầng trệt, 10 tầng lầu, 1 tầng mái. TS. Lưu Trường VănĐồ án Xây Dựng
 
1 tầng trệt, 17 tầng lầu, 1 sân thượng, 1 tầng mái. Đại học Tôn Đức Thắng
1 tầng trệt, 17 tầng lầu, 1 sân thượng, 1 tầng mái. Đại học Tôn Đức Thắng1 tầng trệt, 17 tầng lầu, 1 sân thượng, 1 tầng mái. Đại học Tôn Đức Thắng
1 tầng trệt, 17 tầng lầu, 1 sân thượng, 1 tầng mái. Đại học Tôn Đức ThắngĐồ án Xây Dựng
 
Pile Eccentricity Analysis for 2 Columns Combined Pilecap
Pile Eccentricity Analysis for 2 Columns Combined PilecapPile Eccentricity Analysis for 2 Columns Combined Pilecap
Pile Eccentricity Analysis for 2 Columns Combined Pilecapazhar ahmad
 
Sổ tay chọn máy thi công xây dựng-Nguyến Tiến Thu
Sổ tay chọn máy thi công xây dựng-Nguyến Tiến ThuSổ tay chọn máy thi công xây dựng-Nguyến Tiến Thu
Sổ tay chọn máy thi công xây dựng-Nguyến Tiến ThuDung Tien
 
Pile cap design structural guide
Pile cap design   structural guidePile cap design   structural guide
Pile cap design structural guideAlberto Rosado
 

What's hot (20)

RCC BMD
RCC BMDRCC BMD
RCC BMD
 
Presentación legislación urb. (2)
Presentación legislación urb. (2)Presentación legislación urb. (2)
Presentación legislación urb. (2)
 
72. bien phap thi cong coc khan nhoi
72. bien phap thi cong coc khan nhoi72. bien phap thi cong coc khan nhoi
72. bien phap thi cong coc khan nhoi
 
XREF TRONG AUTOCAD - Phan Minh Tan
XREF TRONG AUTOCAD - Phan Minh TanXREF TRONG AUTOCAD - Phan Minh Tan
XREF TRONG AUTOCAD - Phan Minh Tan
 
[Revit] Biện pháp thi công về Cầu đường
[Revit] Biện pháp thi công về Cầu đường[Revit] Biện pháp thi công về Cầu đường
[Revit] Biện pháp thi công về Cầu đường
 
Báo cáo thực tập vật liệu xây dựng
Báo cáo thực tập vật liệu xây dựng Báo cáo thực tập vật liệu xây dựng
Báo cáo thực tập vật liệu xây dựng
 
Tải trọng Gió theo TCVN 2737:2020
Tải trọng Gió theo TCVN 2737:2020Tải trọng Gió theo TCVN 2737:2020
Tải trọng Gió theo TCVN 2737:2020
 
Cálculo de radier
Cálculo de radierCálculo de radier
Cálculo de radier
 
De cuong tn 17
De cuong tn 17De cuong tn 17
De cuong tn 17
 
Quy trình sản xuất cọc bê tông cốt thép đúc sẵn
Quy trình sản xuất cọc bê tông cốt thép đúc sẵnQuy trình sản xuất cọc bê tông cốt thép đúc sẵn
Quy trình sản xuất cọc bê tông cốt thép đúc sẵn
 
Laudo de reforma residencial
Laudo de reforma residencialLaudo de reforma residencial
Laudo de reforma residencial
 
9 design-of-flat-slabs
9 design-of-flat-slabs9 design-of-flat-slabs
9 design-of-flat-slabs
 
đồ án tốt nghiệp xây dựng dân dụng
đồ án tốt nghiệp xây dựng dân dụngđồ án tốt nghiệp xây dựng dân dụng
đồ án tốt nghiệp xây dựng dân dụng
 
1 tầng hầm, 1 tầng trệt, 10 tầng lầu, 1 tầng mái. TS. Lưu Trường Văn
1 tầng hầm, 1 tầng trệt, 10 tầng lầu, 1 tầng mái. TS. Lưu Trường Văn1 tầng hầm, 1 tầng trệt, 10 tầng lầu, 1 tầng mái. TS. Lưu Trường Văn
1 tầng hầm, 1 tầng trệt, 10 tầng lầu, 1 tầng mái. TS. Lưu Trường Văn
 
1 tầng trệt, 17 tầng lầu, 1 sân thượng, 1 tầng mái. Đại học Tôn Đức Thắng
1 tầng trệt, 17 tầng lầu, 1 sân thượng, 1 tầng mái. Đại học Tôn Đức Thắng1 tầng trệt, 17 tầng lầu, 1 sân thượng, 1 tầng mái. Đại học Tôn Đức Thắng
1 tầng trệt, 17 tầng lầu, 1 sân thượng, 1 tầng mái. Đại học Tôn Đức Thắng
 
Đề tài: Tính toán sức chịu tải cọc khoan nhồi cho nền đất, HAY
Đề tài: Tính toán sức chịu tải cọc khoan nhồi cho nền đất, HAYĐề tài: Tính toán sức chịu tải cọc khoan nhồi cho nền đất, HAY
Đề tài: Tính toán sức chịu tải cọc khoan nhồi cho nền đất, HAY
 
Pile Eccentricity Analysis for 2 Columns Combined Pilecap
Pile Eccentricity Analysis for 2 Columns Combined PilecapPile Eccentricity Analysis for 2 Columns Combined Pilecap
Pile Eccentricity Analysis for 2 Columns Combined Pilecap
 
Sổ tay chọn máy thi công xây dựng-Nguyến Tiến Thu
Sổ tay chọn máy thi công xây dựng-Nguyến Tiến ThuSổ tay chọn máy thi công xây dựng-Nguyến Tiến Thu
Sổ tay chọn máy thi công xây dựng-Nguyến Tiến Thu
 
Concrete beam design
Concrete beam designConcrete beam design
Concrete beam design
 
Pile cap design structural guide
Pile cap design   structural guidePile cap design   structural guide
Pile cap design structural guide
 

Recently uploaded

Application of Residue Theorem to evaluate real integrations.pptx
Application of Residue Theorem to evaluate real integrations.pptxApplication of Residue Theorem to evaluate real integrations.pptx
Application of Residue Theorem to evaluate real integrations.pptx959SahilShah
 
Instrumentation, measurement and control of bio process parameters ( Temperat...
Instrumentation, measurement and control of bio process parameters ( Temperat...Instrumentation, measurement and control of bio process parameters ( Temperat...
Instrumentation, measurement and control of bio process parameters ( Temperat...121011101441
 
Introduction to Machine Learning Unit-3 for II MECH
Introduction to Machine Learning Unit-3 for II MECHIntroduction to Machine Learning Unit-3 for II MECH
Introduction to Machine Learning Unit-3 for II MECHC Sai Kiran
 
Transport layer issues and challenges - Guide
Transport layer issues and challenges - GuideTransport layer issues and challenges - Guide
Transport layer issues and challenges - GuideGOPINATHS437943
 
8251 universal synchronous asynchronous receiver transmitter
8251 universal synchronous asynchronous receiver transmitter8251 universal synchronous asynchronous receiver transmitter
8251 universal synchronous asynchronous receiver transmitterShivangiSharma879191
 
CCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdf
CCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdfCCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdf
CCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdfAsst.prof M.Gokilavani
 
US Department of Education FAFSA Week of Action
US Department of Education FAFSA Week of ActionUS Department of Education FAFSA Week of Action
US Department of Education FAFSA Week of ActionMebane Rash
 
Past, Present and Future of Generative AI
Past, Present and Future of Generative AIPast, Present and Future of Generative AI
Past, Present and Future of Generative AIabhishek36461
 
Earthing details of Electrical Substation
Earthing details of Electrical SubstationEarthing details of Electrical Substation
Earthing details of Electrical Substationstephanwindworld
 
UNIT III ANALOG ELECTRONICS (BASIC ELECTRONICS)
UNIT III ANALOG ELECTRONICS (BASIC ELECTRONICS)UNIT III ANALOG ELECTRONICS (BASIC ELECTRONICS)
UNIT III ANALOG ELECTRONICS (BASIC ELECTRONICS)Dr SOUNDIRARAJ N
 
Class 1 | NFPA 72 | Overview Fire Alarm System
Class 1 | NFPA 72 | Overview Fire Alarm SystemClass 1 | NFPA 72 | Overview Fire Alarm System
Class 1 | NFPA 72 | Overview Fire Alarm Systemirfanmechengr
 
An experimental study in using natural admixture as an alternative for chemic...
An experimental study in using natural admixture as an alternative for chemic...An experimental study in using natural admixture as an alternative for chemic...
An experimental study in using natural admixture as an alternative for chemic...Chandu841456
 
Unit7-DC_Motors nkkjnsdkfnfcdfknfdgfggfg
Unit7-DC_Motors nkkjnsdkfnfcdfknfdgfggfgUnit7-DC_Motors nkkjnsdkfnfcdfknfdgfggfg
Unit7-DC_Motors nkkjnsdkfnfcdfknfdgfggfgsaravananr517913
 
Solving The Right Triangles PowerPoint 2.ppt
Solving The Right Triangles PowerPoint 2.pptSolving The Right Triangles PowerPoint 2.ppt
Solving The Right Triangles PowerPoint 2.pptJasonTagapanGulla
 
Concrete Mix Design - IS 10262-2019 - .pptx
Concrete Mix Design - IS 10262-2019 - .pptxConcrete Mix Design - IS 10262-2019 - .pptx
Concrete Mix Design - IS 10262-2019 - .pptxKartikeyaDwivedi3
 
Call Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile serviceCall Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile servicerehmti665
 
Oxy acetylene welding presentation note.
Oxy acetylene welding presentation note.Oxy acetylene welding presentation note.
Oxy acetylene welding presentation note.eptoze12
 

Recently uploaded (20)

Application of Residue Theorem to evaluate real integrations.pptx
Application of Residue Theorem to evaluate real integrations.pptxApplication of Residue Theorem to evaluate real integrations.pptx
Application of Residue Theorem to evaluate real integrations.pptx
 
Instrumentation, measurement and control of bio process parameters ( Temperat...
Instrumentation, measurement and control of bio process parameters ( Temperat...Instrumentation, measurement and control of bio process parameters ( Temperat...
Instrumentation, measurement and control of bio process parameters ( Temperat...
 
Introduction to Machine Learning Unit-3 for II MECH
Introduction to Machine Learning Unit-3 for II MECHIntroduction to Machine Learning Unit-3 for II MECH
Introduction to Machine Learning Unit-3 for II MECH
 
Transport layer issues and challenges - Guide
Transport layer issues and challenges - GuideTransport layer issues and challenges - Guide
Transport layer issues and challenges - Guide
 
8251 universal synchronous asynchronous receiver transmitter
8251 universal synchronous asynchronous receiver transmitter8251 universal synchronous asynchronous receiver transmitter
8251 universal synchronous asynchronous receiver transmitter
 
CCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdf
CCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdfCCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdf
CCS355 Neural Networks & Deep Learning Unit 1 PDF notes with Question bank .pdf
 
US Department of Education FAFSA Week of Action
US Department of Education FAFSA Week of ActionUS Department of Education FAFSA Week of Action
US Department of Education FAFSA Week of Action
 
Past, Present and Future of Generative AI
Past, Present and Future of Generative AIPast, Present and Future of Generative AI
Past, Present and Future of Generative AI
 
Earthing details of Electrical Substation
Earthing details of Electrical SubstationEarthing details of Electrical Substation
Earthing details of Electrical Substation
 
UNIT III ANALOG ELECTRONICS (BASIC ELECTRONICS)
UNIT III ANALOG ELECTRONICS (BASIC ELECTRONICS)UNIT III ANALOG ELECTRONICS (BASIC ELECTRONICS)
UNIT III ANALOG ELECTRONICS (BASIC ELECTRONICS)
 
Design and analysis of solar grass cutter.pdf
Design and analysis of solar grass cutter.pdfDesign and analysis of solar grass cutter.pdf
Design and analysis of solar grass cutter.pdf
 
Class 1 | NFPA 72 | Overview Fire Alarm System
Class 1 | NFPA 72 | Overview Fire Alarm SystemClass 1 | NFPA 72 | Overview Fire Alarm System
Class 1 | NFPA 72 | Overview Fire Alarm System
 
An experimental study in using natural admixture as an alternative for chemic...
An experimental study in using natural admixture as an alternative for chemic...An experimental study in using natural admixture as an alternative for chemic...
An experimental study in using natural admixture as an alternative for chemic...
 
Unit7-DC_Motors nkkjnsdkfnfcdfknfdgfggfg
Unit7-DC_Motors nkkjnsdkfnfcdfknfdgfggfgUnit7-DC_Motors nkkjnsdkfnfcdfknfdgfggfg
Unit7-DC_Motors nkkjnsdkfnfcdfknfdgfggfg
 
🔝9953056974🔝!!-YOUNG call girls in Rajendra Nagar Escort rvice Shot 2000 nigh...
🔝9953056974🔝!!-YOUNG call girls in Rajendra Nagar Escort rvice Shot 2000 nigh...🔝9953056974🔝!!-YOUNG call girls in Rajendra Nagar Escort rvice Shot 2000 nigh...
🔝9953056974🔝!!-YOUNG call girls in Rajendra Nagar Escort rvice Shot 2000 nigh...
 
Solving The Right Triangles PowerPoint 2.ppt
Solving The Right Triangles PowerPoint 2.pptSolving The Right Triangles PowerPoint 2.ppt
Solving The Right Triangles PowerPoint 2.ppt
 
Concrete Mix Design - IS 10262-2019 - .pptx
Concrete Mix Design - IS 10262-2019 - .pptxConcrete Mix Design - IS 10262-2019 - .pptx
Concrete Mix Design - IS 10262-2019 - .pptx
 
young call girls in Green Park🔝 9953056974 🔝 escort Service
young call girls in Green Park🔝 9953056974 🔝 escort Serviceyoung call girls in Green Park🔝 9953056974 🔝 escort Service
young call girls in Green Park🔝 9953056974 🔝 escort Service
 
Call Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile serviceCall Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile service
 
Oxy acetylene welding presentation note.
Oxy acetylene welding presentation note.Oxy acetylene welding presentation note.
Oxy acetylene welding presentation note.
 

Alpha BIM Plugin | Formwork Area Guideline | Revit API

  • 1. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com ALPHA BIM The plugin support Revit user FORMWORK AREA
  • 2. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com 1. Description Formwork Area add-in is designed for calculating the formwork area for structure element, include Foundation, Column, Framing, Floor, Wall, and Generic Model. This is an effective add-in for Quantity Takeoff the Formwork Area in Revit, a 3D BIM Model-Based Estimating solution. After you create a structural BIM model in Revit, this add-in will help you calculate the formwork area for each member and save the calculated values in Shared Parameters. You can see manual video from part 1 to part 5 to cleanly about features of this add-in: http://bit.ly/3qMPMDI Version Number: 1.0 Compatible with Autodesk Revit, version: 2022, 2021, 2020, 2019, 2018 This is the location of Formwork Area add-in: 2. User manual The interface of Formwork Area add-in as below:
  • 3. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com Check out to get video manual: http://bit.ly/3qMPMDI Formwork Area add-in will calculate the formwork area for select structure elements. You have two way to select elements: 1. Select elements then run add-in. 2. Run add-in then setup options then select elements to calculate. Here is the detailed guide: • SCOPE CALCULATE: ✓ Choose Element Category: Choose the category that you want to calculate the Formwork Area, include: Structure Foundation, Structure Column, Structure Framing, Structure Floor, Structure Wall, and Generic Model. ✓ Scope elements for calculating intersect: The scope of elements used to calculate the intersect area with each element is calculated Formwork Area. • SETTING: ✓ Formwork Wall: ❖ Calculate bottom faces of Openning: Checked to allow calculate the area of bottom faces of Wall Opening.
  • 4. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com ✓ Formwork Framing: ❖ Calculate area bottom: Checked to allow calculate the area of bottom faces of Framing. ✓ Formwork Floor: ❖ Calculate area bottom: Checked to allow calculate the area of bottom faces of Floor. ❖ Subtract bottom with Framing: Checked to allow subtract the bottom area of Floor that intersect with Framing. ❖ Subtract bottom with Foundation: Checked to allow subtract the bottom area of Floor that intersect with Foundation. ❖ Subtract bottom with Floor/Wall/Column/Generic Model: Checked to allow subtract the bottom area of Floor that intersect with Floor/Wall/Column/Generic Model.
  • 5. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com After the settings, click the OK button to calculate the Formwork Area for the elements in the selected scope. Explain the calculation result: Calculation results are stored in the Shared Parameter. These Shared Parameters are created automatically by this Add-in on the first run.
  • 6. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com Explain the calculation result for Structural Foundation: FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area. FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still use this element when calculating the area of intersection of the other elements with it. ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with other elements. FW.Foun.Sides: The total area of the surrounding faces of the Foundation. FW.Foun.SubFoun: The total area intersects with other Foundations. FW.Foun.SubBeam: The total area intersects with Framings. FW.Foun.SubCol: The total area intersects with Columns. FW.Foun.SubWall: The total area intersects with Walls. FW.Foun.SubFloor: The total area intersects with Floors. FW.Foun.SubGeneric: The total area intersects with Generic Models. ALB_FormworkArea = FW.Foun.Sides - FW.Foun.SubFoun - FW.Foun.SubBeam - FW.Foun.SubCol - FW.Foun.SubWall - FW.Foun.SubFloor - FW.Foun.SubGeneric
  • 7. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com Explain the calculation result for Structural Column: FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area. FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still use this element when calculating the area of intersection of the other elements with it. ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with other elements. FW.Col.Sides: The total area of the surrounding faces of the Column. FW.Col.SubFoun: The total area intersects with Foundations. FW.Col.SubBeam: The total area intersects with Framings. FW.Col.SubCol: The total area intersects with other Columns. FW.Col.SubWall: The total area intersects with Walls. FW.Col.SubFloor: The total area intersects with Floors. FW.Col.SubGeneric: The total area intersects with Generic Models. ALB_FormworkArea = FW.Col.Sides – FW.Col.SubFoun - FW.Col.SubBeam - FW.Col.SubCol - FW.Col.SubWall - FW.Col.SubFloor - FW.Col.SubGeneric
  • 8. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com Explain the calculation result for Structural Wall: FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area. FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still use this element when calculating the area of intersection of the other elements with it. ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with other elements. FW.Wall.Total: The total area of the surrounding faces of the Wall plus the total area of the bottom surface of Wall Opening (if calculation is included). FW.Wall.SubFoun: The total area intersects with Foundations. FW.Wall.SubBeam: The total area intersects with Framings. FW.Wall.SubCol: The total area intersects with Columns. FW.Wall.SubWall: The total area intersects with other Walls. FW.Wall.SubFloor: The total area intersects with Floors. FW.Wall.SubGeneric: The total area intersects with Generic Models. ALB_FormworkArea = FW.Wall.Total – FW.Wall.SubFoun - FW.Wall.SubBeam - FW.Wall.SubCol - FW.Wall.SubWall - FW.Wall.SubFloor - FW.Wall.SubGeneric
  • 9. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com Explain the calculation result for Structural Framing: FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area. FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still use this element when calculating the area of intersection of the other elements with it. ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with other elements. FW.Beam.Total: The total area of the surrounding faces of the Framing plus the total area of the bottom surface (if calculation is included). FW.Beam.Bottom: The total area of bottom faces of Framing. FW.Beam.SubFoun: The total area intersects with Foundations. FW.Beam.SubBeam: The total area intersects with other Framings. FW.Beam.SubCol: The total area intersects with Columns. FW.Beam.SubWall: The total area intersects with Walls. FW.Beam.SubFloor: The total area intersects with Floors. FW.Beam.SubGeneric: The total area intersects with Generic Models. ALB_FormworkArea = FW.Beam.Total – FW.Beam.SubFoun - FW.Beam.SubBeam - FW.Beam.SubCol - FW.Beam.SubWall - FW.Beam.SubFloor - FW.Beam.SubGeneric
  • 10. FORMWORK AREA Alpha BIM – Lead on Trust https://alphabimvn.com Explain the calculation result for Structural Floor: FW.Enable: When uncheck, plugin will not mention this element when calculate Formwork Area. FW.EnableSelf: When uncheck, plugin will not calculate Formwork Area of this element, but still use this element when calculating the area of intersection of the other elements with it. ALB_FormworkArea: The finnal formwork area of element had minus the area of intersection with other elements. FW.Floor.Bottom: The total area of bottom faces of Floor. FW.Floor.Sides: The total area of the surrounding faces of the Floor. FW.Floor.SubFoun: The total area intersects with Foundations. FW.Floor.SubBeam: The total area intersects with Framings. FW.Floor.SubCol: The total area intersects with Columns. FW.Floor.SubWall: The total area intersects with Walls. FW.Floor.SubFloor: The total area intersects with other Floors. FW.Floor.SubGeneric: The total area intersects with Generic Models. ALB_FormworkArea = FW.Floor.Bottom + FW.Floor.Sides - FW.Floor.SubFoun - FW.Floor.SubBeam - FW.Floor.SubCol - FW.Floor.SubWall - FW.Floor.SubFloor - FW.Floor.SubGeneric