SlideShare a Scribd company logo

Pipeseal data sheet

Emergency Copper pipe repair kit

1 of 3
Download to read offline
SELECTION & SPECIFIC DATA
Generic Type
Epoxy Paste/Caulk
Description
PIPESEAL is s a unique, multi-component, novolac
epoxy caulk designed to quickly and permanently
patch, seal and repair cracks, holes and leaks in all
types of pipe including copper, steel, lead, cast iron
and aluminum. PIPESEAL is comprised of 100%
solids, contains no VOC’s, is safe to apply and
environmentally friendly. PIPESEAL repairs pipes
within 5 minutes and is ideal for residential and
commercial repairs. It’s excellent adhesive strength
makes it a perfect option for refrigerant lines.
PIPESEAL will not only seal 1/2 diameter leaks in
copper pipes, it will also bond copper to copper.
PIPESEAL’s resin and hardener must be thoroughly
mixed to insure it’s effectiveness. PIPESEAL’s
hardener is liquid in viscosity, so it is important to mix
on a non-porous surface, making sure that the
hardener is blended evenly throughout the resin.
PIPESEAL cures within a few minutes once heated
with a non-flammable heat gun.
Product Features & Benefits
• Works on all metal pipes including copper, steel, lead and cast iron
• Heat activated - Hardens fully in minutes
• Withstands pressures greater than 1200 psi
• No wrapping or plugging required
• Ideal for refrigerant lines
• Extreme chemical resistant properties
• 100% solids - No VOCs
• Permanently seals holes up to 1/2 inch diameter
Color light gray
Finish Matte
Primer Self-priming
Solids Content By Volume 100%
Theoretical Coverage 12.8 sq ft at 125 mils, 2 sq ft at 800 mils
Flash Point > 250°F (121°C)
Pull-Off Adhesion Test ASTM D 4541 - minimum adhesion is 1,900 psi
Recommended Thickness 1 coat @ 10 mils. or greater
Specific Gravity resin: 1.72 hardener 1.03
Volatile Organic Compounds (VOCs) - 0 grams/liters
Weight per Gallon 11.55 lbs.
Product Data
PIPESEAL - 3000PSI
Product Data
PIPESEAL - 3000PSI
2.
POT LIFE
40°F (4°C) - 50 minutes
75°F (24°C) - 30 minutes
92°F (33°C) - 14 minutes
*Do not keep the blended coating in the original container unless immediate use is planned.
Otherwise, exotherm (heat created during the curing process) will considerably shorten the
pot life.
CHEMICAL RESISTANCE
Ammonium Hydroxide Aromatic & Aliphatic Solvents Black Liquor
Butyl Acetate Butyl Carbitol Chlorinated Solvents
Chlorides (except Methylene Chloride) Chromic Acid up to 30%
Hydrochloric Acid - 100% (38% Hydrogen Chloride) Hydrofluoric Acid up to 8%
Hydrofluoric Acid up to 8% Hydrogen Sulfide Lithium Chloride
MEK MSEA Mineral Acids
Nitric Acid up to 10% (Many) Organic Acids Phosphates
Phosphoric Acid up to 100% Potassium Hydroxide Salts
Sodium Hydroxide Sodium Hypochloride up to 10.5%
Sulfides Sulfuric Acid up to 98% White Liquor
Water - Fresh, waste, non-potable
MIXING & THINNING
Mixing Thoroughly mix on a non-porous surface ensuring that the hardener
(liquid component) is fully integrated within the resin.
Ratio 3:1 Ratio (A to B) by Volume
Pot Life 45 minutes in 8 fluid oz mass
SUBSTRATES & SURFACE PREPARATION
General Surfaces must be clean and dry. Remove all dirt, dust, oil and all other
contaminants.
Steel Immersion: SSPC-SP10 Near White with jagged profile of 2.5 – 3.5 mils.
Non-immersion SSPC-SP6 1.5 – 3.0 mils SSPC-SP2 or SP3 are suitable cleaning methods
for mild environments.
APPLICATION GUIDELINES
Apply with a trowel on and around leaking area. Once applied, cure Pipesael with a non-
flammable heat gun. As you apply heat, the uncured gloss texture will turn to a matt texture
which represents full cure within minutes.
CLEANUP & SAFETY
Cleanup Use MEK or Acetone. In case of spillage, absorb and dispose of in
accordance with local applicable regulations.
DYNESIC TECHNOLOGIES
produces exceptional chemically engineered coatings, adhesives and sealants offering
premium corrosion protection, while being safe for the environment and user friendly.
Dynesic Technologies can be found protecting steel, ductile and concrete substrates
worldwide.
Product Data
PIPESEAL - 3000PSI
3.
DIRECTIONS
PO Box 326
Mt. Aetna PA 19544
Website:www.proaccorp.com
Dale Stauffer
Sales Engineer
Office:717-933-9475
Cell: 717-644-7616
Email: dstauffer@proaccorp.com

Recommended

Elastaseal data sheet
Elastaseal data sheetElastaseal data sheet
Elastaseal data sheetDale Stauffer
 
Panseal paste grade data sheet
Panseal paste grade data sheetPanseal paste grade data sheet
Panseal paste grade data sheetDale Stauffer
 
Silvershield data sheet
Silvershield data sheetSilvershield data sheet
Silvershield data sheetDale Stauffer
 
Panseal gallon data sheet
Panseal gallon data sheetPanseal gallon data sheet
Panseal gallon data sheetDale Stauffer
 
Durapatch data sheet
Durapatch  data sheetDurapatch  data sheet
Durapatch data sheetDale Stauffer
 
How to reduce hot forging costs through innovative techniques?
How to reduce hot forging costs through innovative techniques?How to reduce hot forging costs through innovative techniques?
How to reduce hot forging costs through innovative techniques?Srikar Shenoy
 
Plastifloor 1 8 inch flakes floor
Plastifloor 1 8 inch flakes floorPlastifloor 1 8 inch flakes floor
Plastifloor 1 8 inch flakes floorPlasti-Chemie GmbH
 

More Related Content

What's hot

Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...Srikar Shenoy
 
Polymer Product Technical Datasheet Template
Polymer Product Technical Datasheet TemplatePolymer Product Technical Datasheet Template
Polymer Product Technical Datasheet TemplateTDSmaker
 
ZINC PHOSPHATE CEMENT
ZINC PHOSPHATE CEMENTZINC PHOSPHATE CEMENT
ZINC PHOSPHATE CEMENTLabeed Ahmed
 
Both 2016 shanghai development of innovative ultra high temperature coatings ...
Both 2016 shanghai development of innovative ultra high temperature coatings ...Both 2016 shanghai development of innovative ultra high temperature coatings ...
Both 2016 shanghai development of innovative ultra high temperature coatings ...Yuguo Cui
 
Advancements in Ceramic Coating Technology for the Power Generation Industry ...
Advancements in Ceramic Coating Technology for the Power Generation Industry ...Advancements in Ceramic Coating Technology for the Power Generation Industry ...
Advancements in Ceramic Coating Technology for the Power Generation Industry ...Aldrin Arquillano
 
Liqtro Ascella (Product Data Sheet)
Liqtro Ascella (Product Data Sheet)Liqtro Ascella (Product Data Sheet)
Liqtro Ascella (Product Data Sheet)Eko Kiswanto
 
Controlling decarburization during hot rolling of rail steel
Controlling decarburization during hot rolling of rail steelControlling decarburization during hot rolling of rail steel
Controlling decarburization during hot rolling of rail steelSrikar Shenoy
 
Joncryl® HYB 6340 – A New Acrylic PU Hybrid Dispersion for Excellent Mechanic...
Joncryl® HYB 6340 – A New Acrylic PU Hybrid Dispersion for Excellent Mechanic...Joncryl® HYB 6340 – A New Acrylic PU Hybrid Dispersion for Excellent Mechanic...
Joncryl® HYB 6340 – A New Acrylic PU Hybrid Dispersion for Excellent Mechanic...BASF
 
Loxanol® OT 5853
Loxanol® OT 5853Loxanol® OT 5853
Loxanol® OT 5853BASF
 
White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...
White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...
White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...Lucy Grainger
 
LACS Ceramic Coating Presentation (Shared File)
LACS Ceramic Coating Presentation (Shared File)LACS Ceramic Coating Presentation (Shared File)
LACS Ceramic Coating Presentation (Shared File)Jeff Abshire
 
Weh61882 61886 high temperature resistance finish coat (200-600℃) (all k...
Weh61882 61886 high temperature resistance finish coat (200-600℃) (all k...Weh61882 61886 high temperature resistance finish coat (200-600℃) (all k...
Weh61882 61886 high temperature resistance finish coat (200-600℃) (all k...GOPAL RAMALINGAM
 
PlatSil® 71 and 73-Series Silicone Rubbers
PlatSil® 71 and 73-Series Silicone RubbersPlatSil® 71 and 73-Series Silicone Rubbers
PlatSil® 71 and 73-Series Silicone RubbersPolytek Development Corp
 
Dispex® Ultra PX 4575 -- BASF Formulation Additives
Dispex® Ultra PX 4575 -- BASF Formulation AdditivesDispex® Ultra PX 4575 -- BASF Formulation Additives
Dispex® Ultra PX 4575 -- BASF Formulation AdditivesBASF
 
Renishaw Ti6Al4V metal powder re-use study
Renishaw Ti6Al4V metal powder re-use studyRenishaw Ti6Al4V metal powder re-use study
Renishaw Ti6Al4V metal powder re-use studyLucy Grainger
 

What's hot (20)

Crane composite cleanroom
Crane composite   cleanroomCrane composite   cleanroom
Crane composite cleanroom
 
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
 
Gypsum and its products
Gypsum and its productsGypsum and its products
Gypsum and its products
 
Polymer Product Technical Datasheet Template
Polymer Product Technical Datasheet TemplatePolymer Product Technical Datasheet Template
Polymer Product Technical Datasheet Template
 
ZINC PHOSPHATE CEMENT
ZINC PHOSPHATE CEMENTZINC PHOSPHATE CEMENT
ZINC PHOSPHATE CEMENT
 
DENTAL PLASTER
DENTAL PLASTERDENTAL PLASTER
DENTAL PLASTER
 
Both 2016 shanghai development of innovative ultra high temperature coatings ...
Both 2016 shanghai development of innovative ultra high temperature coatings ...Both 2016 shanghai development of innovative ultra high temperature coatings ...
Both 2016 shanghai development of innovative ultra high temperature coatings ...
 
Advancements in Ceramic Coating Technology for the Power Generation Industry ...
Advancements in Ceramic Coating Technology for the Power Generation Industry ...Advancements in Ceramic Coating Technology for the Power Generation Industry ...
Advancements in Ceramic Coating Technology for the Power Generation Industry ...
 
Industrial flooring
Industrial flooringIndustrial flooring
Industrial flooring
 
Liqtro Ascella (Product Data Sheet)
Liqtro Ascella (Product Data Sheet)Liqtro Ascella (Product Data Sheet)
Liqtro Ascella (Product Data Sheet)
 
Controlling decarburization during hot rolling of rail steel
Controlling decarburization during hot rolling of rail steelControlling decarburization during hot rolling of rail steel
Controlling decarburization during hot rolling of rail steel
 
Joncryl® HYB 6340 – A New Acrylic PU Hybrid Dispersion for Excellent Mechanic...
Joncryl® HYB 6340 – A New Acrylic PU Hybrid Dispersion for Excellent Mechanic...Joncryl® HYB 6340 – A New Acrylic PU Hybrid Dispersion for Excellent Mechanic...
Joncryl® HYB 6340 – A New Acrylic PU Hybrid Dispersion for Excellent Mechanic...
 
Loxanol® OT 5853
Loxanol® OT 5853Loxanol® OT 5853
Loxanol® OT 5853
 
Hydrocolloids
HydrocolloidsHydrocolloids
Hydrocolloids
 
White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...
White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...
White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...
 
LACS Ceramic Coating Presentation (Shared File)
LACS Ceramic Coating Presentation (Shared File)LACS Ceramic Coating Presentation (Shared File)
LACS Ceramic Coating Presentation (Shared File)
 
Weh61882 61886 high temperature resistance finish coat (200-600℃) (all k...
Weh61882 61886 high temperature resistance finish coat (200-600℃) (all k...Weh61882 61886 high temperature resistance finish coat (200-600℃) (all k...
Weh61882 61886 high temperature resistance finish coat (200-600℃) (all k...
 
PlatSil® 71 and 73-Series Silicone Rubbers
PlatSil® 71 and 73-Series Silicone RubbersPlatSil® 71 and 73-Series Silicone Rubbers
PlatSil® 71 and 73-Series Silicone Rubbers
 
Dispex® Ultra PX 4575 -- BASF Formulation Additives
Dispex® Ultra PX 4575 -- BASF Formulation AdditivesDispex® Ultra PX 4575 -- BASF Formulation Additives
Dispex® Ultra PX 4575 -- BASF Formulation Additives
 
Renishaw Ti6Al4V metal powder re-use study
Renishaw Ti6Al4V metal powder re-use studyRenishaw Ti6Al4V metal powder re-use study
Renishaw Ti6Al4V metal powder re-use study
 

Similar to Pipeseal data sheet

dental_cements.pdf
dental_cements.pdfdental_cements.pdf
dental_cements.pdfssuser93f9e8
 
1. IMPRESSION MATERIALS ELASTOMERIC.pptx
1. IMPRESSION MATERIALS ELASTOMERIC.pptx1. IMPRESSION MATERIALS ELASTOMERIC.pptx
1. IMPRESSION MATERIALS ELASTOMERIC.pptxDr. Priyanshi Jaiswal
 
Impression materials and recent advances.pptx
Impression materials and recent advances.pptxImpression materials and recent advances.pptx
Impression materials and recent advances.pptxMuskan Agarwal
 
Inelastic impression material
Inelastic impression material   Inelastic impression material
Inelastic impression material Aswati Soman
 
Raising performance in sheet molding compounds (SMC) - Highlight
Raising performance in sheet molding compounds (SMC) - HighlightRaising performance in sheet molding compounds (SMC) - Highlight
Raising performance in sheet molding compounds (SMC) - HighlightHuntsman Advanced Materials Europe
 
Impression materials for complete denture
Impression materials for complete dentureImpression materials for complete denture
Impression materials for complete dentureMarwan Ramadan,Dentist
 
Universal Distributors Ltd: Alteco Adhesive Products
Universal Distributors Ltd: Alteco Adhesive ProductsUniversal Distributors Ltd: Alteco Adhesive Products
Universal Distributors Ltd: Alteco Adhesive ProductsMarcus Anselm
 
recent advances in impression materials
recent advances in impression materialsrecent advances in impression materials
recent advances in impression materialsramkoti reddy
 
Irreversible dental materials
Irreversible dental materialsIrreversible dental materials
Irreversible dental materialsAshitha Dominic
 
SEM 1 IMPRESSION MATERIALS.pptx
SEM 1 IMPRESSION MATERIALS.pptxSEM 1 IMPRESSION MATERIALS.pptx
SEM 1 IMPRESSION MATERIALS.pptxgujjugullygirl
 

Similar to Pipeseal data sheet (20)

Zinc oxide eugenol
Zinc oxide eugenolZinc oxide eugenol
Zinc oxide eugenol
 
Durapatch
Durapatch  Durapatch
Durapatch
 
dental_cements.pdf
dental_cements.pdfdental_cements.pdf
dental_cements.pdf
 
1. IMPRESSION MATERIALS ELASTOMERIC.pptx
1. IMPRESSION MATERIALS ELASTOMERIC.pptx1. IMPRESSION MATERIALS ELASTOMERIC.pptx
1. IMPRESSION MATERIALS ELASTOMERIC.pptx
 
Dental Cements
Dental CementsDental Cements
Dental Cements
 
Cements
CementsCements
Cements
 
Impression materials and recent advances.pptx
Impression materials and recent advances.pptxImpression materials and recent advances.pptx
Impression materials and recent advances.pptx
 
Inelastic impression material
Inelastic impression material   Inelastic impression material
Inelastic impression material
 
MRO Catalogue - 2016 (2) (1)
MRO Catalogue - 2016 (2) (1)MRO Catalogue - 2016 (2) (1)
MRO Catalogue - 2016 (2) (1)
 
Raising performance in sheet molding compounds (SMC) - Highlight
Raising performance in sheet molding compounds (SMC) - HighlightRaising performance in sheet molding compounds (SMC) - Highlight
Raising performance in sheet molding compounds (SMC) - Highlight
 
luting cement
luting cementluting cement
luting cement
 
Impression materials for complete denture
Impression materials for complete dentureImpression materials for complete denture
Impression materials for complete denture
 
DENTURE BASE RESINS
DENTURE BASE RESINS DENTURE BASE RESINS
DENTURE BASE RESINS
 
PolyPoxy® Casting Epoxy Series
PolyPoxy® Casting Epoxy SeriesPolyPoxy® Casting Epoxy Series
PolyPoxy® Casting Epoxy Series
 
New rich text document
New rich text documentNew rich text document
New rich text document
 
Universal Distributors Ltd: Alteco Adhesive Products
Universal Distributors Ltd: Alteco Adhesive ProductsUniversal Distributors Ltd: Alteco Adhesive Products
Universal Distributors Ltd: Alteco Adhesive Products
 
Jaman
JamanJaman
Jaman
 
recent advances in impression materials
recent advances in impression materialsrecent advances in impression materials
recent advances in impression materials
 
Irreversible dental materials
Irreversible dental materialsIrreversible dental materials
Irreversible dental materials
 
SEM 1 IMPRESSION MATERIALS.pptx
SEM 1 IMPRESSION MATERIALS.pptxSEM 1 IMPRESSION MATERIALS.pptx
SEM 1 IMPRESSION MATERIALS.pptx
 

Pipeseal data sheet

  • 1. SELECTION & SPECIFIC DATA Generic Type Epoxy Paste/Caulk Description PIPESEAL is s a unique, multi-component, novolac epoxy caulk designed to quickly and permanently patch, seal and repair cracks, holes and leaks in all types of pipe including copper, steel, lead, cast iron and aluminum. PIPESEAL is comprised of 100% solids, contains no VOC’s, is safe to apply and environmentally friendly. PIPESEAL repairs pipes within 5 minutes and is ideal for residential and commercial repairs. It’s excellent adhesive strength makes it a perfect option for refrigerant lines. PIPESEAL will not only seal 1/2 diameter leaks in copper pipes, it will also bond copper to copper. PIPESEAL’s resin and hardener must be thoroughly mixed to insure it’s effectiveness. PIPESEAL’s hardener is liquid in viscosity, so it is important to mix on a non-porous surface, making sure that the hardener is blended evenly throughout the resin. PIPESEAL cures within a few minutes once heated with a non-flammable heat gun. Product Features & Benefits • Works on all metal pipes including copper, steel, lead and cast iron • Heat activated - Hardens fully in minutes • Withstands pressures greater than 1200 psi • No wrapping or plugging required • Ideal for refrigerant lines • Extreme chemical resistant properties • 100% solids - No VOCs • Permanently seals holes up to 1/2 inch diameter Color light gray Finish Matte Primer Self-priming Solids Content By Volume 100% Theoretical Coverage 12.8 sq ft at 125 mils, 2 sq ft at 800 mils Flash Point > 250°F (121°C) Pull-Off Adhesion Test ASTM D 4541 - minimum adhesion is 1,900 psi Recommended Thickness 1 coat @ 10 mils. or greater Specific Gravity resin: 1.72 hardener 1.03 Volatile Organic Compounds (VOCs) - 0 grams/liters Weight per Gallon 11.55 lbs. Product Data PIPESEAL - 3000PSI
  • 2. Product Data PIPESEAL - 3000PSI 2. POT LIFE 40°F (4°C) - 50 minutes 75°F (24°C) - 30 minutes 92°F (33°C) - 14 minutes *Do not keep the blended coating in the original container unless immediate use is planned. Otherwise, exotherm (heat created during the curing process) will considerably shorten the pot life. CHEMICAL RESISTANCE Ammonium Hydroxide Aromatic & Aliphatic Solvents Black Liquor Butyl Acetate Butyl Carbitol Chlorinated Solvents Chlorides (except Methylene Chloride) Chromic Acid up to 30% Hydrochloric Acid - 100% (38% Hydrogen Chloride) Hydrofluoric Acid up to 8% Hydrofluoric Acid up to 8% Hydrogen Sulfide Lithium Chloride MEK MSEA Mineral Acids Nitric Acid up to 10% (Many) Organic Acids Phosphates Phosphoric Acid up to 100% Potassium Hydroxide Salts Sodium Hydroxide Sodium Hypochloride up to 10.5% Sulfides Sulfuric Acid up to 98% White Liquor Water - Fresh, waste, non-potable MIXING & THINNING Mixing Thoroughly mix on a non-porous surface ensuring that the hardener (liquid component) is fully integrated within the resin. Ratio 3:1 Ratio (A to B) by Volume Pot Life 45 minutes in 8 fluid oz mass SUBSTRATES & SURFACE PREPARATION General Surfaces must be clean and dry. Remove all dirt, dust, oil and all other contaminants. Steel Immersion: SSPC-SP10 Near White with jagged profile of 2.5 – 3.5 mils. Non-immersion SSPC-SP6 1.5 – 3.0 mils SSPC-SP2 or SP3 are suitable cleaning methods for mild environments. APPLICATION GUIDELINES Apply with a trowel on and around leaking area. Once applied, cure Pipesael with a non- flammable heat gun. As you apply heat, the uncured gloss texture will turn to a matt texture which represents full cure within minutes. CLEANUP & SAFETY Cleanup Use MEK or Acetone. In case of spillage, absorb and dispose of in accordance with local applicable regulations. DYNESIC TECHNOLOGIES produces exceptional chemically engineered coatings, adhesives and sealants offering premium corrosion protection, while being safe for the environment and user friendly. Dynesic Technologies can be found protecting steel, ductile and concrete substrates worldwide.
  • 3. Product Data PIPESEAL - 3000PSI 3. DIRECTIONS PO Box 326 Mt. Aetna PA 19544 Website:www.proaccorp.com Dale Stauffer Sales Engineer Office:717-933-9475 Cell: 717-644-7616 Email: dstauffer@proaccorp.com