POWER QUALITY IMPROVEMENT IN ELECTRICAL RAILWAY POWER SYSTEM
Mini Power Station Product Brochure - Salevo Pty Ltd
1. SALEVO
SALEVO IS A PIONEER IN THE ENERGY INDUSTRY
SETTING NEW STANDARDS IN PRODUCING ENERGY FROM HEAT
Mini Power Station KIT Brochure 2015
TM
For more information please visit us at
www.salevo.com
2. OUTPUT USE
Redirected to Electrical Power Grid
Residential, Commercial, Industry, Greenfield
Applications.
INVERTER
Converts DC-AC and
increases amperage.
On-Grid application
PCB Regulator for
smart devises.
Heat
NANO- CARBON BATTERY
BATTERY BANKS
Off- Grid application.
ECOSYSTEM
How does our Patented technology work?
Cooler
Temperature Difference
creates voltage/amperage
PCB
Stabilizes & Boosts VDC
Thermal Electric Modules
DC - AC
Smart Integrated
Circuit
OUR SMART ELECTRONICS
• DC-DC production enhancer – proves Faster
recharge times at a stable and constant rate.
Stabilizes electrical current between the series
circuit, this is Power Factor correction.
• Smart Integrated Circuit.
• Small Form Factor.
• Transfers increased voltage to any type of
inverters or recharges battery banks via the PCB
regulator all off grid.
• PCB encapsulated with environmental proof
casing. Product Picture
- PCB electronics-
PRODUCT FEATURES
• Unique Thermal Induction microchip
technology.
• Generates power as long as heat applies.
• Not depended on solar or wind.
• Output rate at a 98% constant efficiency.
• Heat dissipation increases productivity.
• No moving parts.
• Light weight & flat pack.
• Universal product USB device acceptance.
• Product certifications include:
• Product registered through ERAC.
What is the Mini Power Station?
Salevo’s Mini Power Station is a portable heat harnessing
generator which allows you to effectively use heat to
generate, enhance, distribute and store electrical power to
re-charge and power your smart USB devices when a power
point is far from reach.
Applications
The Mini Power Station Power Bank enables you to also have
an alternative and reliable portable power source perfect for
your next camping trip, travel, on site jobs, sports,
motorcycling or generally when ever you find your self
outdoors and in the need to charge your smart devices.
3. General Data of Single Circuit
Cell: Sterling Microchip (40x40x4mm) x4 in a circuit
Open Circuit Voltage (Voc) 0.3-5 VDC
Maximum Power Voltage
(Vpm)
12 - 23.8 VDC
With Booster (Versions 1-2)
Short Circuit Current (Isc) 0.8 A
Maximum Current (Ipm) 5.6 A
Maximum Power (Pm) Typically 74 watts
Type of output terminal Micro USB
Circuit type Modular – Average 42.24 watts
Volts Celsius PCB Output %
linier
0.7 17.8 + <
1 19.5 + <
2 22.8 + <
3 26 98%
4 28.8 98%
5 32.8 < 98%
0.3/3.3/5-12 PCB takes over 98%
13 -24 Inverter PCB takes over 98%
Continual checks guarantee a consistently high level of quality. Every module undergoes visual, mechanical,
and electrical inspection. This is recognizable by means of the original Salevo label, the serial number, and
the Salevo guarantee:
• 10-year product guarantee – 1 year product warranty
• 25-year linear performance guarantee
– Minimum 96 % of the specified minimum power output
during the first year
– Maximum 0.5% annual reduction of the power output
for following 24 years
3vt per chip maximum generation projects
voltage/amp numbers:
Single circuit setup Vpm: 3.3vts X 4= 13.2 volts
Imax: 1.4amps X 4 = 5.6 amps
Pm: 13.2vts X 5.6amps = 73.92watts
Operation/storage temperature -400C to +2000C
PCB heat tolerance: UL94 V0 1500C
Sterling Microchip surface area tolerance +135-
2000C
PCBkicksin
Both the PCB and Sterling Microchip can be wired in
series and/or in parallel. Determined by the desirable
outcome achieving either Volts or amperage.
Lifetime: 200,000 hours or 80,000 cycles
Module materials specifications are normal values
based upon the hot side temperature indicated.
Thermoelectric material parameters tolerance is +/-
10%.
Housing units and heat sink made from Anodized
Aluminum. About 85% of the structure consist of
Aluminum.
PCB dimensions 40x40x 12mm.
Total panel weights: under a Kilo
Micro USB input & output are USB type 3.
Duty Cycle
MECHANICAL DATA LIMITATION VALUES
ELECTRICAL DATA TEMPLERATURE CO-EFFICIENCIES
QUALITY FROM SALEVO
4. 1.Heat source
e.g. Portable
Butane Gas stove
2.Salevo’s Circuit Panel
Harnesses heat and creates VDC
4. Electronic Regulator And Battery Bank
with 2 USB outlets which
Converts, Stores and regulates power
production providing a usable & safe output.
Universal Micro
USB cord
5.Plug in USB smart
devices you wish to
power/charge
On/off
On/off
Examples of a few of the devices the single circuit can power:
General Data of the Battery Bank
Battery Cell Lithium Polymer
Power Capacity 15,600mAh –
(50,000 upgradable)
Input 5V/1A & 5V/2A
Charge Time 8-10 hours
Standby Time 2,500 hours
Inputs x1 micro USB
Outputs x2 USB’s
Charge indicators Version 1 LED’s –
Version 2 digital
monitor.
Charge time 30mins-1:30hour
What's inside the Mini Power Station KIT?
The KIT provides the harnessing circuit panel which can be used to harness an array of heat
sources, the battery bank (which allows you to store and regulate electricity produced), the Booster
(which is a smart electronic plug-in that increases and stabilizes electrical productivity output), a
USB adapter providing 4 more USB outlets, a USB cord extender to assist the user to carry and
place a light where he so desires, 1x 1W USB LED touch light and the product instruction Manual &
the 12 month product warranty.
*The ability to power/charge depends on wattage consumption levels per device.
Note: Gas stove not provided, purchased separately.
3.Booster
5. Contact us for a live demonstration
The power KIT everyone needs to have!
6. BRINGING YOU NEW ENERGY POSSIBILITIES
Brought to you by Salevo Pty Ltd ABN 411 606 926 79 ACN 160 692 679
www.salevo.com Copyrights 2015