Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Training voor docenten in Duurzaam Doen Huis over nieuw energiepracticum

111 views

Published on

Op dinsdag 28 mei 2019 volgden docenten van ROC Friese Poort een training in het Duurzaam Doen Huis, afgestemd op een kortgeleden aangeschaft studentenpracticum. Wim Kluiters bracht het docententeam bij monde van leverancier Festo de fijne kneepjes van de aankoop bij. Het practicum spitst zich toe op wind-, zonne-energie en energieopslag.

Lees het verhaal: https://www.centrumduurzaamfriesland.nl/nieuws/training-voor-docenten-in-duurzaam-doen-huis-over-nieuw-energiepracticum/

Published in: Education
  • Be the first to comment

  • Be the first to like this

Training voor docenten in Duurzaam Doen Huis over nieuw energiepracticum

  1. 1. www.festo-didactic.com Highlights Solar/Wind Power Training Packages Classroom study and experimentation Power production using renew- able energies is gaining momentum all around the world. As solar power production becomes more affordable for residential applications, the pace of installations is skyrock- eting. The result is an increas- ing demand for qualified tech- nicians able to understand and manage such systems. Just like solar power, wind power is getting more attention due to its ease of use and cost-effective installation. Small wind turbines represent many decentralized production points that should be consid- ered in today’s electrical net- work. Training solutions Festo Didactic has developed training systems – available in basic, advanced, or complete packages – that combine nec- essary hardware equipment and courseware resources. • The Solar Power Complete Package covers topics from the basics of solar power pro- duction and photovoltaic panels to producing power for “off-the-grid” and “grid- tied” applications. • The Wind Power Complete Package allows for the study of wind power production on small scale wind turbines and use of this power to supply different types of loads. • Modular, expandable packages with A4 modules • Dynamometer emulating a real wind turbine • Two types of charge con- trollers: PWM, MPPT • Standalone and grid-tied production scenarios • Load unit with replicable results • Real wind turbine compo- nents
  2. 2. DID1160EN03/2018FestoDidacticSE USA Festo Didactic Inc. Eatontown, NJ 07724 Phone: +1-732-938-2000 Toll Free: +1-800-522-8658 Fax: +1-732-774-8573 Canada Festo Didactic Ltée/Ltd Québec (Québec) G2N 2K7 Phone: +1-418-849-1000 Toll Free: +1-800-522-8658 Fax: +1-418-849-1666 Germany Festo Didactic SE Rechbergstrasse 3 73770 Denkendorf Phone: +49(0)711/3467-0 Fax: +49(0)711/347-54-88500 Computer-based instrumentationPractical A4 design The hardware equipment included in the Solar/Wind Training Packages are standard A4 modules, to be used in a workstation. Several types of modules are available (loads, transformers, batteries, power supplies, etc.). Modules are interconnected with safety cables; all inputs and outputs are isolated, and modules are grounded for increased safety. State-of-the-art DACI and dynamometer The Data Acquisition and Con- trol Interface (DACI) is used to measure, observe, and analyze electrical and mechanical parameters. The 4-quadrant power supply and dynamome- ter controller offers comput- er-based instruments and con- trol functions, enhancing the flexibility of the packages. Cost-effective expansion Modules are compatible with other learning solutions from Festo Didactic. They can be integrated in different setups to expand learning to other topics in Electrical Engineering, mak- ing expansion possible without duplication of equipment Solar Power (Complete package) Topic coverage: • The diode • The solar (photovoltaic) panel • Effect of temperature on panel performance and of shading on panel operation • Storing energy into batteries • Solar panel orientation, and performance vs. insolation • Standalone PV systems for DC or AC loads • Use of an MPPT charge con- troller in standalone PV systems • Grid-tied PV systems Wind Power (Complete package) Topic coverage: • Voltage-speed and torque-current characteristics of a wind turbine generator • Power vs. wind speed • Storing energy from a wind turbine into batteries • Standalone wind power systems for DC or AC loads Courseware covers necessary theory and hands-on exercises, as well as test questions. To see topic coverage of all available packages and their scope of delivery, please visit the website. Solar/Wind Power Training Packages Classroom study and experimentation Comprehensive courseware Upcoming developments The following packages will be based on the same hard- ware: • AC and DC Fundamentals (Single and Three-Phase) • Electrical Machines (Asynchronous, Synchro- nous, Wound Rotor, DC Machine, etc.) • AC and DC Power Electron- ics (Chopper, Inverter, Rec- tifier, Thyristors, etc.) Contact your sales represen- tative for more information.
  3. 3. 186 www.festo-didactic.com Electric power technology > EMS A4 > Solar power training packages Solar power training packages From basic to industrial concepts Solar Power Production As solar power production becomes more and more affordable for resi- dential applications, no wonder the number of installations worldwide is blooming. So comes the need to train qualified technicians in under- standing and maintaining these sys- tems Our solar power learning solutions come in modular packages that will fit your training needs starting with the fundamentals of photovolta- ic panels and how they work all the way to actual photovoltaic ener- gy production systems operating in stand-alone or grid-tied operation. Features –– Flexible packages for specific training and budget needs –– A4 form factors –– Modular approach giving oppor- tunity to combine these packages with other topics –– New and safer grounding methods between the modules –– Solar Panel Emulator for experi- ments requiring more power –– Two types of inverters : PWM and MPPT –– Top of the line data acquisition and control interface designed for learning purposes Computerized tools made for learning To guide students through their learning path, Festo Didactic pro- vides state-of-the-art data acquistion tools for easy, safe and fast measure- ments in order to speed up the setup time but also reduce the downtime of using standard measuring instru- ments. The Data Acquisition and Control Interface comes also with an oscilloscope, a phasor analyser, a data table and a graph on specifical- ly designed software optimized for learning purposes. Training Content The workbooks take the student starting with the basics and explain- ing the necessary theory in order to perform the different lab experi- ments planned. The first workbook focuses on the photovoltaic panels themselves, their construction and their operation under different condi- tions. The second workbook enables the students to experiment produc- tion scenarios either on a stand- alone mode (off-grid) or in grid-tied mode (parallel). Please refer to the page 187 for the specific topic coverage of each work- book.
  4. 4. 187 Electric power technology > EMS A4 > Solar power training packages Three different packages are available Solar Power Basic Package 596086 Learn the fundamental principles of solar power in a cost-effective package The most important components at a glance: 1 1x 12 V Lead-Acid Batteries* 595060 2 1x Solar Panel Test Bench 595057 1x Monocrystalline Silicon Solar Panel 595058 1x Solar Power (Instructor Guide) 603890 Also order Workbook: Solar Power *A 12 V DC battery charger is required for this module. The user can use his own with right 4 mm safety plugs or use the following equipment Required accessories for the basic package 2x Digital Multimeter 579782 1x Connection Lead Set and Grounding Kit 595916 Optional equipment for the basic package (both combined to charge the 12V Lead-Acid Batteries) 1x 4-Quadrant Power Supply and Dynamometer Controller... (including Manual and Computer-Based Control) 595028 1x Firmware Function (4Q Power Supply/Dynamometer)... Lead-Acid Battery Charger 581438 1 12 V Lead-Acid Batteries –– 2x VRLA (valve regulared lead acid) batteries mounted on a A4 module –– Nominal voltage: 12 V (each battery) –– Nominal capacity: 2.3 Ah (each battery) –– Maximum charge current: 0.92 A (both batteries) –– Maximum Discharge Current: 5 A (each battery) –– Fuse: 5 A (auto reset, each battery) –– Test point fuse: 0.1 A (auto reset) –– Dimensions (H x W x D): 297 x 133 x 140 mm –– Weight: 5.5 kg Order no. 595060 2 Solar Panel Test Bench The Solar Panel Test Bench is a tabletop module where the solar panel mounts into so that it can be illuminated and experiments can be conducted. –– Input voltage: 230 V/50 Hz –– Nominal current: 1.5 A –– Dimensions (H x W x D): 392 x 250 x 370 mm –– Weight: 5.5 kg Order no. 595057 Solar Power Advanced Package 596087 Train on the concepts of solar power production in stand-alone and also grid-tied scenarios The most important components at a glance: 1x DC 48 V Lamps 595055 1x AC 230 V Lamps 595056 2x 1AC Energy Meter 594904 1x 48 V Lead-Acid Battery Pack 595059 1x DC 48 V PWM Charge Controller 595051 1x DC 48 V MPPT Charge Controller 595050 1x AC 230 V Power Supply 595930 1x AC 24 V Power Supply 772050 1x 1AC 230 V Stand-Alone Inverter 595052 1x 1AC 230 V Grid-Tied Inverter 595053 1x 4-Quadrant Power Supply and Dynamometer Controller (including Manual and Computer-Based Control) 595028 1x Firmware Function (4Q Power Supply/Dynamometer): Lead-Acid Battery Charger 581438 1x Firmware Function (4Q Power Supply/Dynamometer): Solar Panel Emulator 581440 1x Data Acquisition and Control Interface (including computer-based instrumentation for 2x current inputs and 2x voltage inputs) 595912 1x Photovoltaic Systems (Instructor Guide) 593987 Also order Workbook: Photovoltaic Systems Required accessories for the advanced package 1x Communications Gateway* 595054 1x Connection Lead Set and Grounding Kit 595916 * Only one per lab is necessary Solar Power Complete Package 596088 Contains both basic and advanced package in one complete solution Required accessories for the complete package 2x Digital Multimeter 579782 1x Communications Gateway* 595054 1x Connection Lead Set and Grounding Kit 595916 * Only one per lab is necessary Optional accessories for the basic and complete packages (for outdoor experiments) 1x Tripod 583216 1x Pyranometer 579784 A paper copy of the corresponding Instructor Guide is included if you order by package 1 2 Also order: Workbooks Solar Power The exercises in the workbooks con- tain the theory and lab manipulations to cover the following exercises: –– The Diode –– The Solar Panel (Photovoltaic Panel) –– Effect of Temperature on Solar Panel Performance –– Storing Energy from Solar Panels into Batteries (optional) –– Effect of Shading on Solar Panel Operation –– Solar Panel Orientation –– Solar Panel Performance versus Insolation Campus licence ➔ www.festo-didactic.com, en 596125 Student Manual, en 603887 Instructor Guide, en 603890 Photovoltaic Systems The exercises in the workbooks con- tain the theory and lab manipulations to cover the following exercises: –– Stand-Alone PV Systems for DC Loads –– Use of an MPPT Charge Controller in Stand-Alone PV Systems –– Stand-Alone PV Systems for AC Loads –– Grid-Tied PV Systems Campus licence ➔ www.festo-didactic.com, en 596125 Student Manual, en 593985 Instructor Guide, en 593987
  5. 5. 188 www.festo-didactic.com Electric power technology > EMS A4 > Solar power training packages Accessories Solar power training packages 1 2 31 Monocrystaline Silicon Solar Panel The Monocrystaline Silicon Solar Panel are mounted on a common metal chassis that can be installed in the Solar Panel Test Bench, when performing exercises indoors, or on a tripod when performing exercises outdoors. –– PV Module: 2 monocrystalline silicon solar panels. –– Open-circuit voltage (VOC): 9 V @ STC –– Short-Circuit Current (ISC): 100 mA @ STC –– Load potentiometer: 500Ω - 2 W –– Diodes: 3 –– Thermometer: -50°C to +150°C –– Dimensions (H x W x D): 240 x 237 x 58 mm –– Net Weight 2.0 kg Order no. 595058 2 1AC Energy Meter The 1AC Energy Meter is an A4 mod- ule that includes a single-phase en- ergy meter. –– AC network voltage: 230 V – 50 Hz –– Current: 16 A –– Monitored Values: voltage, current, energy, power –– Dimensions (H x W x D): 297 x 133 x 140 mm –– Weight: 5.5 kg Order no. 594904 3 DC 48 V PWM Charge Controller The DC 48 V PWM Charge Controller is an A4 module used to perform charge controlling experiments with batteries and DC energy sources like solar. –– Charge controller type: MPPT (maximum power point tracking) –– Battery Output: Max: current 7 A, absorption voltage 57.6 V, float voltage 55.2 V –– Recommended battery pack voltage: 48 V DC –– Photovoltaic panel input: 7 A, 100 V (max.) –– Input protection: reverse polarity and overvoltage (100 V) –– Battery connection protection: Reverse polarity and overvoltage (64 V) –– Dimensions (H x W x D): 297 x 266 x 218 mm –– Weight: 5.5 kg Order no. 595051 4 DC 48 V MPPT Charge Controller The DC 48 V MPPT Charge Controller is an A4 module that is used to con- trol the charge of batteries with DC energy sources like solar panels. It uses the MPPT technology which ad- just its input voltage and find the maximum power operating point from the solar array and transfer this power to the battery and load. –– Charge controller type: MPPT (maximum power point tracking) –– Battery Output: Maximum current 7A, absorption voltage 57.6 V, float voltage 55.2 V –– Recommended battery pack voltage: 48 V DC –– Photovoltaic panel input: 7 A, 100 V (max.) –– Input protection: reverse polarity and overvoltage (100 V) –– Battery connection protection: Reverse polarity and overvoltage (64 V) –– Dimensions (H x W x D): 297 x 266 x 218 mm –– Weight: 5.5 kg Order no. 595050 4
  6. 6. 189www.festo-didactic.com Electric power technology > EMS A4 > Solar power training packages 1 AC 230 V Power Supply The AC 230 V Power Supply consists of a single-phase power supply which, connected to the AC line volt- age, supplies the necessary power for single-phase experiments. This power supply is mounted in an A4 module. –– Input: 3 A/230 V/50-60 Hz –– Output: 3 A/230 V/50-60 Hz –– Circuit Breaker: 3 A –– Dimensions (H x W x D) 297 x 133 x 140 mm –– Weight: 2.8 kg Order no. 595930 2 1AC 230 V Grid-Tied Inverter The 1AC 230 V Grid-Tied Inverter is used to return power from a DC pow- er source such as batteries directly to the grid and it is mounted in an A4 module. –– Inverter type: Grid-Tied with MPPT –– Output power: 215 W –– Output voltage: 1AC/230 V/50 Hz /0.94 A (max.) –– Input voltage: DC 48 V –– MPPT voltage range 27-39 V –– Input protection: Reverse polarity and overvoltage (42V DC) –– AC output protection: Inverter built-in protections –– Dimensions (H x W x D): 297 x 266 x 140 mm –– Weight: 5.5 kg Order no. 595053 1 2 3 4 3 Communications Gateway The Communications Gateway is an A4 module that is used to communi- cate and set grid-tied inverters over the AC line voltage directly. –– Input: 1AC/230 V/50 Hz/0.05 A (fused) –– Communication with inverters through ac power line –– Dimensions (H x W x D): 297 x 266 x 140 mm –– Weight: 5.5 kg Order no. 595054 4 Pyranometer The Pyranometer is a high-quality instrument for measuring solar irra- diance. Order no. 579784
  7. 7. 190 Electric power technology > EMS A4 > Wind power training packages Wind power training packages Learn the concepts of residential wind power production Wind power study in a classroom Just like solar power, wind power is getting more attention due to its ease of use and cost-effective instal- lation. The small wind turbines rep- resent a lot of decentralized produc- tion nodes that have to be taken into account in today’s electrical network. Our wind power learning solutions come in a modular way which can also be mixed with other learning solutions. The packages start with an introduction to wind power using real wind turbine parts into a safe working environment along with our dynanometer that recreates realis- tic wind condition as well as the real power-torque curves. Once the intro- duction is done, student will exper- iment energy production to supply power to AC and DC loads. Features –– Flexible packages for specific train- ing and budget needs –– A4 form factors –– Modular approach giving oppor- tunity to combine these packages with other topics –– New and safer grounding methods between the modules –– Wind Turbine Emulator embedded in a flexible Dynamometer –– Real wind turbine parts in safe working environment –– Top of the line data acquisition and control interface designed for learning purposes Computerized tools made for learning To guide students through their learning path, Festo Didactic pro- vides state-of-the-art data acquistion tools for easy, safe and fast measure- ments in order to speed up the setup time but also reduce the downtime of using standard measuring instru- ments. The Data Acquisition and Control Interface comes also with an oscil- loscope, a phasor analyser, a data table and a graph on specifically de- signed software optimized for learn- ing purposes. In the same vein, the Dynamometer provided connnects to your computer through USB using the same software in order to set it up quickly and easily to enhance the learning experience and recreates wind turbine conditions in the class- room environment. Training Content The workbooks take the student starting with the basics and explain- ing the necessary theory in order to perform the different lab experi- ments planned. The first workbook focuses on introducing wind power production to then charge batteries and power simple loads. The second workbook provides the student the knowledge to setup stand-alone ap- plications to produce power and use it with DC loads or with AC loads in combination with an inverter. Please refer to the page 191 for the specific topic coverage of each work- book.
  8. 8. 191 Electric power technology > EMS A4 > Wind power training packages Three different packages are available Wind Power Basic Package 596083 Learn the fundamental principles of wind power in a cost-effective package The most important components at a glance: 1 1x Wind Turbine Generator/Controller 595061 2 1x Wind Turbine Load Resistors 594819 1x Resistive Load 594820 1x 48 V Lead-Acid Battery Pack 595059 1x 4-Quadrant Power Supply and Dynamometer Controller (including Manual and Computer-Based Control, Pb-Acid Battery Charger, Turbine Emulator) 596127 1x 4-Quadrant Dynamometer Motor 595062 1x AC 24 V Power Supply 772050 1x Timing Belt 793141 1x Guard – Side-by-side 794195 1x Introduction to Wind Power (Instructor Guide) 603893 Also order Workbook: Wind Power Required accessories for the basic package 2x Digital Multimeter 579782 1x Connection Lead Set and Grounding Kit 595916 Wind Power Advanced Package 596084 Learn how to produce power and use The most important components at a glance: 1 1x Wind Turbine Generator/Controller 595061 1x DC 48 V Lamps 595055 1x AC 230 V Lamps 595056 1x 48 V Lead-Acid Battery Pack 595059 1x AC 24 V Power Supply 772050 1x 1AC 230 V Stand-Alone Inverter 595052 1x 4-Quadrant Power Supply and Dynamometer Controller (including Manual and Computer-Based Control, Pb-Acid Battery Charger, Turbine Emulator) 596127 1x 4-Quadrant Dynamometer Motor 595062 1x Data Acquisition and Control Interface (including computer-based instrumentation for 2x current inputs and 2x voltage inputs) 595912 1x Timing Belt 793141 1x Guard – Side-by-side 794195 1x Wind Power Systems (Instructor Guide) 603896 Also order Workbook: Wind Power Systems Required accessories for the advanced package 1x Connection Lead Set and Grounding Kit 595916 Wind Power Complete Package 596085 Contains both basic and advanced package in one complete solution Required accessories for the complete package 2x Digital Multimeter 579782 1x Connection Lead Set and Grounding Kit 595916 A paper copy of the corresponding Instructor Guide is included if you order by package Also order: Workbooks Introduction to Wind Power The exercises in the workbooks con- tain the theory and lab manipula- tions to cover the following exer- cises: –– Voltage-Speed Characteristic of a Wind Turbine Generator –– Torque-Current Characteristic of a Wind Turbine Generator –– Power versus Wind Speed –– Storing Energy from a Wind Turbine into Batteries Campus licence ➔ www.festo-didactic. com, en 596126 Student Manual, en 603893 Instructor Guide, en 603896 Wind Power Systems The exercises in the workbooks con- tain the theory and lab manipula- tions to cover the following exer- cises: –– Stand-Alone Wind Power Systems for DC Loads –– Stand-Alone Wind Power Systems for AC Loads Campus licence ➔ www.festo-didactic. com, en 596126 Student Manual, en 593989 Instructor Guide, en 593991 1 Wind Turbine Generator/ Controller The Wind Turbine Generator/ Controller is a tabletop module that provides a wind turbine for experi- mentation. It can be coupled to a dy- namometer motor to be externally driven. –– Turbine type: Direct-drive, fixed- pitch –– Nominal power: 200 W at a wind speed of 12.5 m/s –– Charge voltage setpoint range: 54.4 – 68.0 V –– Recommended battery pack voltage: 48 V –– Diode rectifier 110 V – 5 A –– Dimensions (H x W x D) 211 x 200 x 370 mm –– Weight: 5.5 kg Order no. 595061 2 Wind Turbine Load Resistors The Wind Turbine Resistive Load is an A4 module that provides a resis- tive electrical load for wind turbine experiments. –– Resistance Value (each resistor) 15Ω –– Nominal Voltage: 38 V AC/DC –– Max. Current: 2.53 A (each resistor) –– Resistance Accuracy: ± 5% –– Load at Nominal Voltage (each resistor): 84 W –– Overcurrent Protection (each resis- tor) Thermal circuit breaker: 3 A –– Dimensions (H x W x D): 297 x 266 x 140 mm –– Weight: 5.0 kg Order no. 594819 1 2
  9. 9. 192 Electric power technology > EMS A4 > Wind power training packages Accessories Wind power training packages 1 Resistive Load The Resistive Load is an A4 module that provides a universal resistive electrical load for a wide range of ex- periments. –– Three banks of manually switch- able resistive loads –– Resistance Values (Each Bank): 1100/2200/4400 Ω –– Nominal Voltage: 230 V AC/DC –– Resistance Accuracy: ± 5% –– Load at Nominal Voltage (Each Bank): 84 W –– Dimensions (H x W x D) 297 x 266 x 140 mm –– Weight: 5.5 kg Order no. 594820 1 22 4-Quadrant Power Supply and Dynamometer Controller The 4-Quadrant Power Supply and Dynamometer Controller is an A4 module that offers two main oper- ating modes: Power supply and dy- namometer. For the dynamometer, a dynamometer motor is also required. In the power supply mode, the unit acts as a versatile four-quadrant volt- age or current source, in the dyna- mometer mode the unit acts as a ful- ly configurable mechanical brake or prime mover. Order no. 596127
  10. 10. 193 Electric power technology > EMS A4 > Solar and wind power training packages Accessories Solar and wind power training packages 1 4-Quadrant Dynamometer Motor The 4-Quadrant Dynamometer Motor consists of a tabletop motor that is used as a complete 4-Quadrant dy- namometer in conjunction with the 4-Quadrant Power Supply and Dyna- mometer Controller. This dynamo- meter can then act as a prime mover, a brake, a motor test bench and can also emulate various types of pre- defined loads and even custom ones. –– Torque: 0 to 3 Nm –– Direction of Rotation: CW/CCW –– Speed: 0 to 2500 r/min –– Nominal Power: 350 W –– Protection: Detachable protective cover with interlocking start switch –– Dimensions (H x W x D): 232 x 207 x 377 mm –– Weight: 5.5 kg Order no. 595062 2 DC 48 V Lamps –– Mounted on a A4 module –– Lamp types: 1x LED and 1x incandescent –– Voltage: 48 V DC –– Current: 1.5 A –– Input protection: Reverse polarity and overvoltage (60 V) –– Dimensions (H x W x D): 297 x 133 x 140 mm –– Weight: 5.5 kg Order no. 595055 3 AC 230 V Lamps –– Mounted on a A4 module –– Lamps types: Incandescent, CFL and LED –– Voltage: 230 V 50/60 Hz –– Current: 0.36 A –– Dimensions (H x W x D): 297 x 133 x 140 mm –– Weight: 5.5 kg Order no. 595056 4 48 V Lead-Acid Battery Pack –– 4x12 V lead-acid batteries mounted in series in an A4 module. –– Nominal voltage: 48 V DC (12V for each battery) –– Nominal capacity: 9 Ah –– Maximum charge current: 2.7 A –– Maximum discharge current: 7 A –– Breaker: 10 A –– Dimensions (H x W x D): 297 x 266 x 140 mm –– Weight: 5.5 kg Order no. 595059 5 AC 24 V Power Supply The AC 24 V power supply is an A4 module that provides auxiliary power for various system components. –– Input Voltage: 230 V/50-60 Hz/ 0.3 A (max.) –– Inlet via IEC C14 terminal –– Main switch with integrated 0.3 A thermal beaker –– Output voltage: 24 V/50-60 Hz/ 2. 5 A (max) –– Outlet via dedicatd barrel connectors (2) 5.5/2.1 mm –– LED indicator for output voltage –– Dimensions (H x W x D): 297 x 133 x 140 mm –– Weight: 2.8 kg Order no. 772050 6 1AC 230 V Stand-Alone Inverter The 1AC 230 V Stand-Alone Inverter converts a DC power source such as batteries in an AC power source for “off-the-grid” applications. –– Inverter type: pure sine wave –– Nominal output power: 300 W –– Output voltage: 1AC/230 V/50 Hz/ 1.4 A (max.) –– Input voltage: DC 48 V –– Input protection: Reverse polarity and overvoltage (64 V max.) –– Output protection: Inverter built-in shortcircuit and overload protection –– Dimensions (H x W x D): –– 297 x 266 x 212 mm –– Weight: 5.5 kg Order no. 595052 7 Data Acquisition and Control Interface The Data Acquisition and Control In- terface (DACI) is verstatile and com- plete device in an A4 module used for measuring, observing, and ana- lyzing electrical and mechanical pa- rameters in electric power systems and power electronics circuits. Order no. 595912 1 5 2 6 3 7 4

×