Submit Search
Upload
IppolitPLAPLetter.PDF
•
0 likes
•
60 views
Ben Ordonez
Follow
Report
Share
Report
Share
1 of 2
Download now
Download to read offline
Recommended
IPRO 497-212 Poster
IPRO 497-212 Poster
Andrew Kang
Microstructurally_Modified_TiAl6V[1]
Microstructurally_Modified_TiAl6V[1]
Milan Van Bree
basic concept of laser,population inversion,absorption,stimulated emission,spontaneous emission,laser drawbacks
Lasers
Lasers
REVATHIAMBIKA VENUGOPAL
LaserBond™ achieves a welded or metallurgical bond with minimal, precisely controlled heat input provided by an optimized laser beam. Temperature sensitive components and materials, such as hardened shafts, gears etc, can be repaired with minimal risk of distortion or other undesirable heat effects. The metallurgical bond allows LaserBond™ applied layers to be used in high impact, heavily loaded/stressed situations with no risk of spalling or separation of the overlay. The controlled energy minimizes the undesirable thermal decomposition of hard phases such as carbides, resulting in optimum wear resistance. Due to the extremely low dilution with the substrate, high specification materials can be applied in a thin layer with corrosion and wear resistant surfaces as thin as 0.3mm possible. Thick overlays for significant repairs of up to 20mm can also be applied in multiple passes. Heat affected zones are minimized and the stress related cracking inherent in welded or PTA applied hard facing is generally eliminated. Standard LaserBond™ overlay options include Tungsten Carbide, Stainless Steels, Nickel alloys such as Inconel, and Cobalt alloys such as Stellite1. Other materials can be applied on request. The High Pressure High Velocity Oxy-Fuel process applies coating material at supersonic velocities, resulting in surfaces of the highest possible quality and performance. HP HVOF coatings are very dense, very well bonded, and free of the oxides and tensile stresses typically found in coatings produced with other thermal spray processes. Consequently, they perform better in most service environments. HP HVOF wear resistant coatings are being adopted globally as an environmentally friendly, and technically superior, alternative to Chrome plating on components such as aircraft landing gear. Surfaces combining resistance to corrosion and wear are also routinely applied by HP HVOF. LaserBond™ approved HP HVOF coatings include Tungsten Carbide, Chrome Carbide, Nickel based alloys (e.g. Inconel 625 and 718), Cobalt alloys such as Stellite1, stainless steels and copper based alloys. Ajith Ranasinghe | Sales Engineer LaserBond Ltd 2/57 Anderson Road, Smeaton Grange NSW 2567 | m:+61417618512 | t: +612 4631 4500 | f: +612 4631 4555 ajithr@laserbond.com.au
Laser Cladding and Thermal Spraying
Laser Cladding and Thermal Spraying
Ajith Ranasinghe
Laser and laser cladding
Laser and laser cladding
erfan.zaker@gmail.com
General Applications of Laser and also Applications of Laser in Modern Surface Modifications.. Working of Laser and Types of Laser and also typical applications of Laser..
Laser applications in surface modifications..
Laser applications in surface modifications..
Prem Kumar
Powder Metallurgy
Powder metallurgy review vol2 no_4_winter_2013_dp
Powder metallurgy review vol2 no_4_winter_2013_dp
Working from home
Presentation on Powder Metallurgy
Powder Metallurgy
Powder Metallurgy
shankaragiri
Recommended
IPRO 497-212 Poster
IPRO 497-212 Poster
Andrew Kang
Microstructurally_Modified_TiAl6V[1]
Microstructurally_Modified_TiAl6V[1]
Milan Van Bree
basic concept of laser,population inversion,absorption,stimulated emission,spontaneous emission,laser drawbacks
Lasers
Lasers
REVATHIAMBIKA VENUGOPAL
LaserBond™ achieves a welded or metallurgical bond with minimal, precisely controlled heat input provided by an optimized laser beam. Temperature sensitive components and materials, such as hardened shafts, gears etc, can be repaired with minimal risk of distortion or other undesirable heat effects. The metallurgical bond allows LaserBond™ applied layers to be used in high impact, heavily loaded/stressed situations with no risk of spalling or separation of the overlay. The controlled energy minimizes the undesirable thermal decomposition of hard phases such as carbides, resulting in optimum wear resistance. Due to the extremely low dilution with the substrate, high specification materials can be applied in a thin layer with corrosion and wear resistant surfaces as thin as 0.3mm possible. Thick overlays for significant repairs of up to 20mm can also be applied in multiple passes. Heat affected zones are minimized and the stress related cracking inherent in welded or PTA applied hard facing is generally eliminated. Standard LaserBond™ overlay options include Tungsten Carbide, Stainless Steels, Nickel alloys such as Inconel, and Cobalt alloys such as Stellite1. Other materials can be applied on request. The High Pressure High Velocity Oxy-Fuel process applies coating material at supersonic velocities, resulting in surfaces of the highest possible quality and performance. HP HVOF coatings are very dense, very well bonded, and free of the oxides and tensile stresses typically found in coatings produced with other thermal spray processes. Consequently, they perform better in most service environments. HP HVOF wear resistant coatings are being adopted globally as an environmentally friendly, and technically superior, alternative to Chrome plating on components such as aircraft landing gear. Surfaces combining resistance to corrosion and wear are also routinely applied by HP HVOF. LaserBond™ approved HP HVOF coatings include Tungsten Carbide, Chrome Carbide, Nickel based alloys (e.g. Inconel 625 and 718), Cobalt alloys such as Stellite1, stainless steels and copper based alloys. Ajith Ranasinghe | Sales Engineer LaserBond Ltd 2/57 Anderson Road, Smeaton Grange NSW 2567 | m:+61417618512 | t: +612 4631 4500 | f: +612 4631 4555 ajithr@laserbond.com.au
Laser Cladding and Thermal Spraying
Laser Cladding and Thermal Spraying
Ajith Ranasinghe
Laser and laser cladding
Laser and laser cladding
erfan.zaker@gmail.com
General Applications of Laser and also Applications of Laser in Modern Surface Modifications.. Working of Laser and Types of Laser and also typical applications of Laser..
Laser applications in surface modifications..
Laser applications in surface modifications..
Prem Kumar
Powder Metallurgy
Powder metallurgy review vol2 no_4_winter_2013_dp
Powder metallurgy review vol2 no_4_winter_2013_dp
Working from home
Presentation on Powder Metallurgy
Powder Metallurgy
Powder Metallurgy
shankaragiri
Wall cladding
Wall cladding
Niteesh Patel
Are you buying or building a home anytime soon? You may want to become familiar with the types of cladding systems by reading this slideshare today!
7 Types of Cladding
7 Types of Cladding
Scullivan
Laser & Its Application
Laser & Its Application
Tuhin_Das
Laser ppt
Laser ppt
seva for poor people
70 million professionals use LinkedIn SlideShare to learn about any topic quickly and stand out.
LinkedIn SlideShare: Knowledge, Well-Presented
LinkedIn SlideShare: Knowledge, Well-Presented
SlideShare
atomization process
atomization process
Nikhil Borale
PowerPoint of personal arts journey
Slideshare Powerpoint presentation
Slideshare Powerpoint presentation
elliehood
Slideshare ppt
Slideshare ppt
Mandy Suzanne
More Related Content
Viewers also liked
Wall cladding
Wall cladding
Niteesh Patel
Are you buying or building a home anytime soon? You may want to become familiar with the types of cladding systems by reading this slideshare today!
7 Types of Cladding
7 Types of Cladding
Scullivan
Laser & Its Application
Laser & Its Application
Tuhin_Das
Laser ppt
Laser ppt
seva for poor people
70 million professionals use LinkedIn SlideShare to learn about any topic quickly and stand out.
LinkedIn SlideShare: Knowledge, Well-Presented
LinkedIn SlideShare: Knowledge, Well-Presented
SlideShare
atomization process
atomization process
Nikhil Borale
PowerPoint of personal arts journey
Slideshare Powerpoint presentation
Slideshare Powerpoint presentation
elliehood
Slideshare ppt
Slideshare ppt
Mandy Suzanne
Viewers also liked
(8)
Wall cladding
Wall cladding
7 Types of Cladding
7 Types of Cladding
Laser & Its Application
Laser & Its Application
Laser ppt
Laser ppt
LinkedIn SlideShare: Knowledge, Well-Presented
LinkedIn SlideShare: Knowledge, Well-Presented
atomization process
atomization process
Slideshare Powerpoint presentation
Slideshare Powerpoint presentation
Slideshare ppt
Slideshare ppt
Download now
