Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Product Testing and
Compliance for
International Markets
By
Tom Garrigan
Senior Test
Engineer
2
Independent Accredited Testing 2
BSRIA Test
• ISO/IEC 17025 accredited laboratory ( UKAS No.1053).
• Listed on NANDO as ...
3
Independent Accredited Testing 3
Testing of …
4
Independent Accredited Testing 4
Microgeneration Certification
Scheme (MCS)
• Managed by Gemserv and supported by DECC.
...
5
Independent Accredited Testing 5
Microgeneration Certification
Scheme (MCS) changes
Outdoor heat exchanger Indoor heat e...
6
Independent Accredited Testing
• Phase 1 - Non-domestic RHI since November 2011.
• Phase 2 - Domestic RHI to start in Sp...
7
Independent Accredited Testing 7
Energy Technology List
• Managed by Carbon Trust on behalf of DECC.
• ECA claim availab...
8
Independent Accredited Testing 8
European Labels
• European Heat Pump Association (EHPA) Quality Label (QL).
• 12 partic...
9
Independent Accredited Testing 9
Heat Pump Energy Labelling
• Mandatory from 26 September 2015 .
• Heating and combi-sys...
10
Independent Accredited Testing
CPR replaces CPD
• Construction Products Regulations (CPR) 305/2011/EU replaces
Construc...
11
Independent Accredited Testing 11
Thank you
Tom Garrigan
Senior Test Engineer
+44 (0) 1344 465 600
test@bsria.co.uk
Upcoming SlideShare
Loading in …5
×

Product testing and compliance edited - MCE 2014

1,468 views

Published on

Product testing and compliance for international markets - presented at MCE Milan 2014

  • Be the first to comment

  • Be the first to like this

Product testing and compliance edited - MCE 2014

  1. 1. Product Testing and Compliance for International Markets By Tom Garrigan Senior Test Engineer
  2. 2. 2 Independent Accredited Testing 2 BSRIA Test • ISO/IEC 17025 accredited laboratory ( UKAS No.1053). • Listed on NANDO as a Notified Body (NB 0480). • Product validation and verification for: • CE marking • Thermal performance • Efficiency • Smoke emissions • Acoustics • Corrosion • EN and International standards. • Product development and bespoke testing. • On-site and witness testing.
  3. 3. 3 Independent Accredited Testing 3 Testing of …
  4. 4. 4 Independent Accredited Testing 4 Microgeneration Certification Scheme (MCS) • Managed by Gemserv and supported by DECC. • Maximum capacity of heat pumps is 45kW. • Assesses products, manufacturing processes and Installers. • Testing in accordance with BS EN14511:2011 Parts 1-4. • EN 16147:2011 testing for DHW heat pumps to be introduced. • Linked to RHPP/ domestic RHI.
  5. 5. 5 Independent Accredited Testing 5 Microgeneration Certification Scheme (MCS) changes Outdoor heat exchanger Indoor heat exchanger Minimum COP Air inlet dry bulb (°C) Air inlet wet bulb (°C) Water inlet (°C) Water outlet (°C) - 7 6 30 35 3.8 2 1 a 35 3.1 a The test is performed at the water flow rate obtained during the test at the corresponding standard rating conditions. • Two thermal performance test points for air to water heat pumps. • One thermal performance test point for water/brine to water heat pumps. • Minimum COP efficiency requirements.
  6. 6. 6 Independent Accredited Testing • Phase 1 - Non-domestic RHI since November 2011. • Phase 2 - Domestic RHI to start in Spring 2014. • Domestic RHI tariff: • ASHP – 7.3pence/kWh for heat generated • GSHP - 18.8pence/kWh for heat generated • RHPP to continue until 31 March 2014. • Eligibility criteria: • Energy Performance Certificate required • Green Deal Assessment • MCS register number – product/installation • All installations must be meter ready. 6 Renewable Heat Incentive (RHI)
  7. 7. 7 Independent Accredited Testing 7 Energy Technology List • Managed by Carbon Trust on behalf of DECC. • ECA claim available to all businesses that pay UK corporation or income tax. • Testing in accordance with: • BS EN14511– Space heating • BS EN16147 – Domestic hot water heat pumps • Minimum efficiency requirements. • Selected products on ETL audited annually. • Declared values must be within 95% of independently tested values.
  8. 8. 8 Independent Accredited Testing 8 European Labels • European Heat Pump Association (EHPA) Quality Label (QL). • 12 participating countries. • Testing in accordance with: • EN 14511:2011 – Space heating • EN 16147:2011 – Domestic hot water heat pumps • EN 12102:2008 – Acoustic testing • Multiple thermal test points. • Minimum efficiency requirement at one test point. • Testing regulations for seasonal efficiencies being developed.
  9. 9. 9 Independent Accredited Testing 9 Heat Pump Energy Labelling • Mandatory from 26 September 2015 . • Heating and combi-systems ≤70kW -Lot 1 (EU) No 811/2013. • Water heaters ≤70kW and ≤500L storage volume -Lot 2 (EU) No 812/2013. • Labels to include: • Appliance details • Energy class • Consumption, efficiency, capacity etc • Noise • Is the industry going to be ready for the labelling regulations?
  10. 10. 10 Independent Accredited Testing CPR replaces CPD • Construction Products Regulations (CPR) 305/2011/EU replaces Construction Products Directive (CPD) 09/106/EEC. • CE marking voluntary in UK under CPD until 01 July 2013. • BSRIA saw 100% increase in radiator test work over last 12 months, similar volume in 2005 on introduction of CPD. 10
  11. 11. 11 Independent Accredited Testing 11 Thank you Tom Garrigan Senior Test Engineer +44 (0) 1344 465 600 test@bsria.co.uk

×