Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

Multivariable liquid analysis system

116 views

Published on

The measuring system Krypton® Multi includes all you need for disinfection and pH measurement: instrument, sensors, assembly and wiring. The system is used for measuring and control in industrial disinfectants applications like in breweries, water works or cooling towers.

Published in: Engineering
  • Be the first to comment

  • Be the first to like this

Multivariable liquid analysis system

  1. 1. Krypton® Multi For measuring disinfectants, pH and temperature - optional ORP and 5th measuring input. subjects to alterations - version 07/2015 Online measuring board for measuring disinfectants, pH and temperature - optional ORP and 5th selectable measuring input Worldwide access by internal webserver (LAN or WLAN) Krypton® Multi Applications Disinfection Process Water Drinking Water / Beverages Description The measuring system Krypton® Multi includes all you need for disinfection and pH measurement: instrument, sensors, assembly and wiring. The system is used for measuring and control in industrial desinfectants applications like in breweries, water works or cooling towers. The integrated modular assembly Argon® Stabiflow ensures a constant flow of approx. 30 l/h. As a consequence the system provides stable, precise and reliable measuring values. Flow fluctuations not any longer shown up in your measuring curves as long as you guarantee a water inlet above 35 l/h. The entry level version of Neon® Multi is equipped with 3 measurements: disinfection, pH, and temperature. The disinfection measuring input can be configured to measure free Chlorine, Chlorine dioxide, Ozone or Hydrogen peroxide via menu. The measuring range is adjustable. An ORP measurement can be added and even a 5th measuring input for total Chlorine. The entry level version of Neon® Multi offers 6 digital inputs and 8 potential free CO relays as control or as alarm relay. The instruments offers PID as well as 3 point control function with and without position feedback. Neon® Multi is expandable through software upgrades or add on modules. It is possible to add up to five analog outputs, Modbus, automatic sensor cleaning ASR® and datalogger. The complete system is pressure resistant up to 6 bar (at 20°C) and brine resistant.
  2. 2. Krypton® Multi For measuring disinfectants, pH and temperature - optional ORP and 5th measuring input. subjects to alterations - version 07/2015 Particular characteristics 85.. 265 V AC power supply 90x50 mm touch display Real time clock Pressure proofed to 6 bar (at 20°C without TCl) Precise measurement by a constant flow Up to 3 separate PID controller for disinfectant measurement, pH and the 5th measuring input (Total Chlorine) disinfection measurement or pH: 3-point-controller with or without position feedback Dosage check Up to 4 potential-free alarm relais Lower and upper limit value with delay for each measuring parameter adjustable and assignable to the alarm relay Alerts selectable for alarm relay Eventlog and event help Safety by autolock function 4 user level by password function Individual user codes are possible Intuitive operation with touch screen and graphical menu Functional upgrade by activation code or with modules SD card function: firmware update, configuration and diagnosis file Test menu for wiring check Screensaver: Auto-shut-off of LCD backlight Automativ pH-compensation for free Chlorine measurement Automatic or manual temperature compensation Display of organic Chlorine by combination of total Chlorine and free Chlorine measurement Option: 5th measuring input fot total Chlorine Option: ASR® automatic sensor cleaning Option: 5 mA outputs 0/4 to 20 mA adjustable with fault current Option: RS 485 Modbus RTU Option: data log function - storage of all measuring data up to one year and trendview of stored data
  3. 3. Krypton® Multi For measuring disinfectants, pH and temperature - optional ORP and 5th measuring input. subjects to alterations - version 07/2015 Interface diagram Technical data Measuring parameter Free Chlorine, Chlorine dioxide, Ozone 0.. 1000 µg/l 0.. 5.00 mg/l 0.. 10.00 mg/l Free Chlorine, Chlorine dioxide 0.. 20.00 mg/l pH-value 0.. 14.00 pH ORP -1500.. 1500 mV Temperature 0.. 50 °C Hydrogen Peroxide 0.. 30 mg/l Total Chlorine 0.. 10 mg/l
  4. 4. Krypton® Multi For measuring disinfectants, pH and temperature - optional ORP and 5th measuring input. subjects to alterations - version 07/2015 Input characteristics Accuracy +/-2% of measuring range limit Temperature measuring range 0.. 50°C Temperature coefficient 0,0.. 8,0 %/K adjustable Digital input Flow control, external controller stop, 2x level control, activation 2nd control parameter set Ambient conditions pH-range 6.. 8 pH (free Chlorine) 6.. 9 pH (Chlorine dioxide, Ozone, Hydrogen peroxide) total Chlorine depending on sensor Flow >20 l/h, constant Min. conductivity > 150 S/cm Temperature Depending on sensor, assembly and reference measurement Output characteristics Alarm relay up to 4 potentialfree CO, max. 250 V; 2 A, 550 VA Output signal Optional: 5 x 0/4.. 20 mA (scaleable, galvanically isolated) Load 500 Ohm Registration range Scaleable within the measuring range Storage media Accessory: SD card up to 2 GB - Industry standard Baud rate 19200 kbs (Modbus) Data format 8 bit Power supply Line voltage 85.. 265 V AC / DC, 50.. 60 Hz Power consumption 10 VA Ambient conditions Temperature Storage -20.. +65°C, exception sensor 0.. +30°C Operation 0.. +50°C Humidity max. 90% rH at 40°C (non-condensing) Protection class Wall mounted IP 65 Controller Control mode on/off controller (adjustable hysteresis) P/PI/PID controller (pulse-pause, pulse-frequency or continous output) 3-point controller with or without position feedback, coagulation dosing optional) Relay 8 relays, each a potential-free CO contact, max. 250 V, 2A, 550 VA Start delay 0.. 200 sec till controller active Controller stop Digital input
  5. 5. Krypton® Multi For measuring disinfectants, pH and temperature - optional ORP and 5th measuring input. subjects to alterations - version 07/2015 Design configuration Material Board: PVC, assembly: PMMA, cocks: PP, PVC, instrument: ABS, sensors: glass Dimensions 400 x 700 mm Connection cable inlet: 2x M16, 2x M12 + optional: 2x M12 und 1x M25 plug-in terminal: rigid/ flexible 0,14 - 1,5 mm² relays / power supply - starr/flexibel 0,2-1 / 0,2-1,5 mm² distribution block 0,5-2,5/ 0,5-2,5 mm² Mechanical drawing
  6. 6. Krypton® Multi For measuring disinfectants, pH and temperature - optional ORP and 5th measuring input. subjects to alterations - version 07/2015 Order information Choose the components you need and that´s how your "assembly version" is designed. We will have to technically inspect and approve a free combination of individual key features.
  7. 7. Krypton® Multi For measuring disinfectants, pH and temperature - optional ORP and 5th measuring input. subjects to alterations - version 07/2015 Accessories hand-held units Radon Des- pH The Radon photometer is used for measuring of Chlorine, Chlorine dioxide, Ozone, Hydrogen peroxide and pH. Accurate and consistent results are obtained quickly. Delivery contents is everything neede to measure Chlorine, Chlorine dioxide and Ozone. The delivery content conains evrything needed for measuring Chlorine, Chlorine dioxide and Ozone. For measurement of Hydrogen peroxide you need a H2O2-addon and for the pH measurement the reagent phenolred. accessories Test Plug DES With the test plug you can check the function and connection of our disinfection measurement - not for Total Chlorine measurement (not TCl). Powered by TCPDF (www.tcpdf.org)

×