COLD WORK PERMIT SCOPEREF: SECTION 6.1.1•Generally every work which is not specifically coveredby any other work permit.•Opening vessels, pipes or enclosed spaces•Where equipment requires decontamination•Mechanical maintenance work•Civil maintenance work•Erection removal of scaffolding•Insulation and painting
COLD WORK PERMIT SCOPEREF: SECTION 6.1.1•Equipment greasing and lubrication by the other thanowner department•Maintenance of fire protection equipment•Machinery monitoring including VibrationMeasurement•Working on de energized electrical equipment•Troubleshooting work on energized electricalequipment between 50 V and 480 V.
COLD WORK PERMIT AUTHORIZATIONREF: TABLE # 02 SECTION 5.9 OPERATING NON AREA OPERATING AREAPERMIT TYPE AUTHORIZED AUTHORIZED BY BYCOLD WORK SHIFT ENGR SUPT/PERMIT SUPERVISOR/ AREA ENGINEER
WORK PERMIT AUTHORIZATIONREF: SECTION 5.9 All work permit issuers and receivers are given authorization through competency based test UMs/SHs/ Coordination Engineers GTEs / Trade Apprentices
COLD WORK PERMIT DURATIONREF: SECTION 5.5TYPE OF DURATION EXTEND EXTENDABLEPERMIT WITHIN FORCOLD ONE SHIFT ONE HOUR ONE MOREWORK (08 OR 12 SHIFT (08 ORPERMIT HOUR) 12 HOURS)Valid for 08 hours in operating areas during normal plant operation (5.5.1)Valid for 12 hours in operating areas during shutdown (5.5.1)Valid for 12 hours in general shift units (5.5.2)Expired if job not started within two hours of work permit issuance.