An ENCO Industries Company  SpillCon Solutions™ is a Leading Manufacturer and       Provider of Environmental Control Prod...
A Global Provider of Environmental Control Solutions                       CORPORATE BACKGROUNDERENCO Industries was found...
About Us ENCO Industries was founded in 1994 as Environmental Container, providing DOT/UN ap- proved waste packaging produ...
Sorbent PadsMB WHITE OIL ONLY PADSITEM #       TYPE     FORMAT                              SIZE              UNIT/CASE QT...
Oil OnlySorbent Booms, Socks, Pillows, Sweeps, Drum ToppersMB WHITE OIL ONLY SORBENT BOOMSITEM #               TYPE       ...
UniversalSorbent Booms, Socks, Pillows, Sweeps, Drum ToppersMB GRAY UNIVERSAL SORBENT BOOMSITEM #             TYPE        ...
Spill Kits Matching Requirements     SpillCon’ Oil Spill Carts include a variety of sorbents to handle oil spills and othe...
Spill KitsMarine Oil Spill KitsOil Spill Kits designed to respond to OPA 90 and IMO/MARPOL 73/78 regulations.With these ki...
Marine Oil Spill Kits           Description                                                       12 Barrel  7 Barrel 1.5 ...
Spill Response Kits          Qty    Description 5 gallon Spill Kit              Size          10     White Oil-Only HeavyW...
Sphag SorbMost effective cleanup solution to cleanup problems TECHNICAL: 1 cubic ft absorbs 5-7 gallons of product Meets E...
ISOLITE                                      Porosity ControlTechnologies for making porous products and controlling itspo...
MOP                                    Maximum Oil PickupMOP is an innovative, new oil absorbent made from a renewable res...
Secondary Containment                 Spill Pallet containment for IBCs and Drums                 are economical and porta...
SNAP UP BERM Snap-up support provides a sturdy side wall for excellent spill containment 100% usable interior space ...
FOAM BERM Durable foam logs allow vehicles to drive over them Foam logs are covered with a fuel resistant polyethylene...
FLEXWALL BERM Takes only minutes to set-up; fast and easy deployment Innovative design allows driver to enter/exit wit...
FLEXIBLE SPILLPAN   No set up required   Durable 3” foam logs allow to drive into from any angle   30 oz fabric is c...
THROW ’N GO No assembly required Walls lay flat when not in use Fastest deployment in the industry for portable spil...
Capture Hazardous Spills from                     Railroad Tanker Cars and LocomotivesTrackMats Rail Road Track oil absorb...
Capture Hazardous Spills from                     Railroad Tanker Cars and LocomotivesTrackPansTrackPans have been designe...
PILLOW TANKS      Heavy duty military/industrial style fabric tanks      Collapsible and Portable with custom sizes av...
ONION TANKS            Roll Top Onion                Open Top Onion Tank                      Zipper Top Onion Tank       ...
Response & Deployment                  SpillCon’s Response & Deployment products are                  cutting edge technol...
STORMWATER MANAGEMENTThe Drain Guard is installed in a catch basin and is held in place by the drain’s grate.Stormwater ru...
Dewatering BagContain Sediment And Oil Pumped Out During Dewatering Operations.   Detains both oil and sediment,   Sta...
ROC BARRIER™WORLD’S FASTEST RESPONSE OIL CONTAINMENT SYSTEMUsing innovative technology, the ROC BarrierTM is deployed at s...
SPILLWATCH          AUTOMATED NON-CONTACT OIL SPILL DETECTION                         AND ALARM   Real-time around-the-c...
NEW OIL IN WATER MONITORING BUOYCompact and rugged buoy system is designed for short term moni-toring (up to 24 months). T...
THE ONLY CORER TO COLLECT AN UNDISTERBED SAMPLEThe range of multiple corers are simple, reliable corers for collecting mul...
Spill Detection - Marine & Land Operating 24/7, the SpillWatch system is used for the detection of petro- leum products in...
Upcoming SlideShare
Loading in …5
×

SpillCon brochure

811 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
811
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
6
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

SpillCon brochure

  1. 1. An ENCO Industries Company SpillCon Solutions™ is a Leading Manufacturer and Provider of Environmental Control Products Storm DetectionRecoveryProducts Response Deployment Containment Clean-Up Remediation www.spillconsolutions.com
  2. 2. A Global Provider of Environmental Control Solutions CORPORATE BACKGROUNDERENCO Industries was founded in 1994 as Environmental Container, providing DOT/UN approvedwaste packaging products exhibiting the HazPack™ brand to meet the EPA’s mandate for regu-lated waste packaging.Today, ENCO Industries is a rapidly growing, privately held company that has evolved into a globalprovider of environmental control products and solutions that meet the needs of a wide range ofindustries and markets including government (defense), oil and gas, manufacturing, and pharma-ceutical.In fact, INC. Magazine named ENCO Industries as one of the INC. 500 | 5000 with significantrevenue growth, positioning the company in the Top 10 Spot in New Hampshire.The company’s synergistic products are sold through its various business units, providing hazard-ous and non-hazardous waste packaging, industrial containers, spill control, and detection solu-tions that contribute to the safety and security of our environment.. Environmental Industrial Spill Control Government Packaging Containers & Prevention & Defense Supply
  3. 3. About Us ENCO Industries was founded in 1994 as Environmental Container, providing DOT/UN ap- proved waste packaging products brandishing the HazPack™ brand to meet the EPA’s man- date for regulated waste packaging. Today, ENCO Industries is a rapidly growing, privately held company that has evolved into a global provider of environmental control products and solutions that meet the needs of a wide range of industries and markets including government (defense), oil and gas, manufac- turing, and pharmaceutical. The company’s synergetic products are sold thru its various business units, providing haz- ardous and nonhazardous waste packaging, industrial container, spill control, and detection solutions that contribute to the safety and security of our environment.A Leading Meltblown Sorbent Manufacturer Oil Only Melt Blown Pads and Rolls come in a variety of weights and sizes. They can also be bonded or perforated for any job, spill, or day-to-day maintenance requirements. Innovative Boom composition delivers exceptional performance utiliz- ing UV resistant polyester netting and high tensile strength rope to help eliminate boom roll. Pillows and Socks are extremely effective for water or land applica- tions. Non-absorbing water Pillows float on water and our Socks are capable of rapid absorption while exhibiting superior strength. 55 Gallon Sorbent Drum covers are designed to catch drips and spills that can occur when dispensing various types of hydrocarbon mate- rial. Hazmat Mats and Rolls are used to absorb very aggressive fluids such as acids and caustic fluids in addition to non-aggressive fluids. They are yellow in color to denote hazmat or caution. Sorbent Rail Mats are custom designed and are used to effectively manage drips and leaks in train maintenance areas.
  4. 4. Sorbent PadsMB WHITE OIL ONLY PADSITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLETSPWOKH50 Pads Heavy King 30" X 40" (76 cm x 102 cm) 50 15SPWOEH100 Pads Extra Heavy 15" X 18" (38 cm x 46 cm) 100 30SPWOH100 Pads Heavy 15" X 18" (38 cm x 46 cm) 100 30SPWOH100D Pads Heavy Dimpled 15" X 18" (38 cm x 46 cm) 100 30SPWOM100 Pads Medium 15" X 18" (38 cm x 46 cm) 100 40SPWOM100D Pads Medium Dimpled 15" X 18" (38 cm x 46 cm) 100 40SPWOS100 Pads Single 15" X 18" (38 cm x 46 cm) 100 50SPWOS200 Pads Single 15" X 18" (38 cm x 46 cm) 200 30MB GRAY UNIVERSAL SORBENT PADSITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLETSPGUKH50 Pads Heavy King 30" X 40" (76 cm x 102 cm) 50 15SPGUH100D Pads Heavy Dimpled 15" X 18" (38 cm x 46 cm) 100 30SPGUM100D Pads Medium Dimpled 15" X 18" (38 cm x 46 cm) 100 40SPGUS200 Pads Single 15" X 18" (38 cm x 46 cm) 200 30MB YELLOW HAZMAT SORBENT PADSITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLETSPYHH100D Pads Heavy Dimpled 15" X 18" (38 cm x 46 cm) 100/Bale 30 Sorbent RollsMB WHITE OIL ONLY ROLLSITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLETSRWOH36144 Rolls White Heavy 36" X 144 (91 cm x 43 m) 1 18SRWOHD36144 Rolls Heavy Dimpled 36" X 144 (91 cm x 43 m) 1 18SRWOHDS18144 Rolls Heavy Dimpled Split 18" X 144 (46 cm x 43 m) 2 18SRWOM36144 Rolls Medium 36" X 144 (91 cm x 43 m) 1 18SRWOMD36144 Rolls Medium Dimpled 36" X 144 (91 cm x 43 m) 1 18SRWOMDS18144 Rolls Medium Dimpled Split 18" X 144 (46 cm x 43 m) 2 18MB GRAY UNIVERSAL SORBENT ROLLSITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLETSRGUH36144 Rolls Heavy Dimpled 36" X 144 (91 cm x 43 m) 1 18SRGUHDS18144 Rolls Heavy Dimpled Split 18" X 144 (46 cm x 43 m) 2 18SRGUMD36144 Rolls Medium Dimpled 36" X 144 (91 cm x 43 m) 1 18SRGUMDS18144 Rolls Medium Dimpled Split 18" X 144 (46 cm x 43 m) 2 18MB YELLOW HAZMAT SORBENT ROLLSITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLETSRYHH36144 Rolls Heavy Dimpled 36" X 144 (91 cm x 43 m) 1/Bale 18
  5. 5. Oil OnlySorbent Booms, Socks, Pillows, Sweeps, Drum ToppersMB WHITE OIL ONLY SORBENT BOOMSITEM # TYPE SIZE UNIT/CASE QTY/PALLETSB510WO Booms 5" X 10 (13 cm x 3 m) 4 24SB810WO Booms 8" X 10 (20 cm x 6 m) 4 16MB WHITE OIL ONLY SORBENT SOCKSITEM # TYPE SIZE UNIT/CASE QTY/PALLETSS34WO40 Socks 3" X 4 (8 cm x 1 m) 40 18SS396WO20 Socks 3" X 96" (8 cm x 2 m) 20 18SS3120WO15 Socks 3" X 120" (8 cm x 3 m) 15 18MB WHITE OIL ONLY SORBENT PIL-ITEM # TYPE SIZE UNIT/CASE QTY/PALLETSPIL1010WO Pillows 10" X 10" X 2" (25 cm x 25 cm x 5 cm) 40 18SPIL918WO Pillows 9" X 18" X 2" (23 cm x 46 cm x 5 cm) 20 18SPIL1818WO Pillows 18" X 18" X 2" (46 cm x 46 cm x 5 cm) 10 18MB WHITE OIL ONLY SORBENT BILGEITEM # TYPE SIZE UNIT/CASE QTY/PALLETSBB518 Bilge Boom 5" x 18" (13 cm x 46 cm) 4 24SBB818 Bilge Boom 8" X 18" (20 cm x 46 cm) 4 16MB WHITE OIL ONLY SORBENT SWEEPITEM # TYPE SIZE UNIT/CASE QTY/PALLETSSW18100 Sweep 18" X 100 (46 cm x 30 m) 1 40MB WHITE OIL ONLY SORBENT DRUMITEM # TYPE SIZE UNIT/CASE QTY/PALLETSD24WO Drum Toppers 24" (61 cm) Diameter 25/Box 80
  6. 6. UniversalSorbent Booms, Socks, Pillows, Sweeps, Drum ToppersMB GRAY UNIVERSAL SORBENT BOOMSITEM # TYPE SIZE UNIT/CASE QTY/PALLETSB510GU Booms 5" X 10 (13 cm x 3 m) 4 24SB810GU Booms 8" X 10 (20 cm x 6 m) 4 16MB GRAY UNIVERSAL SORBENT SOCKSITEM # TYPE SIZE UNIT/CASE QTY/PALLETSS34GU40 Socks 3" X 4 (8 cm x 1 m) 40 18SS396GU20 Socks 3" X 96" (8 cm x 2 m) 20 18SS3120GU15 Socks 3" X 120" (8 cm x 3 m) 15 18MB GRAY UNIVERSAL SORBENT PILLOWSITEM # TYPE SIZE UNIT/CASE QTY/PALLETSPIL918GU Pillows 9" X 18" X 2" (23 cm x 46 cm x 5 cm) 20 18SPIL1818GU Pillows 18" X 18" X 2" (46 cm x 46 cm x 5 cm) 10 18MB GRAY UNIVERSAL SORBENT DRUM TOPPERSITEM # TYPE SIZE UNIT/CASE QTY/PALLETSD24GU Drum Toppers 24" (61 cm) Diameter 25 80HazmatSorbent Booms, Socks, Pillows, Sweeps, Drum ToppersMB YELLOW HAZMAT SORBENT SOCKSITEM # TYPE SIZE UNIT/CASE QTY/PALLETSS34YH40 Socks 3" X 4 (8 cm x 1 m) 40/Box 18SS396YH20 Socks 3" X 96" (8 cm x 2 m) 20/Box 18SS3120YH15 Socks 3" X 120" (8 cm x 3 m) 15/Box 18MB YELLOW HAZMAT SORBENT PILLOWSITEM # TYPE SIZE UNIT/CASE QTY/PALLETSPIL918YH Pillows 9" X 18" X 2" (23 cm x 46 cm x 5 cm) 20/Box 18SPIL1818YH Pillows 18" X 18" X 2" (46 cm x 46 cm x 5 cm) 10/Box 18
  7. 7. Spill Kits Matching Requirements SpillCon’ Oil Spill Carts include a variety of sorbents to handle oil spills and other petro- leum-based fluids while repelling water—an all inclusive solution for quick response! Wheeled containers move quickly to a spill site and fit easily through doorways and aisles. Our Oil Spill Carts can also be moved with a forklift and are lockable to protect contents. DRUMS • CARTS • TRAILERSLoose GranularOil-Dri® Granular Clay absorbents are available in the traditional coarseformula and the finer QuickSorb™ grind. Both are produced from thesame high-quality absorbent minerals and are effective on oils, coolants,grease, water, and other liquid spills.Solidifier Oil Solidifiers are composed of dry, high molecular weightpolymers that have a porous matrix and large oleophilic (strong affinityfor oil rather than water) surface area. Once in contact with oil, the oil so-lidifies to form a physical bond with the oil.Isolite for Soil RemediationIsolite™ is a unique porous ceramic pellet used as a biocarrier for mi-crobes. It serves to remediate contaminated soil/groundwater when in-jected into man-made subsurface fractures.
  8. 8. Spill KitsMarine Oil Spill KitsOil Spill Kits designed to respond to OPA 90 and IMO/MARPOL 73/78 regulations.With these kits on board you are assured of fulfilling any safety and environmental regulation applicable globally.There are several regulations circulating and in short they are:Oil Pollution Act of 1990 (33 CFR Part 155) or OPA90 requires oil carrying vessels in U.S. waters to have oil spill cleanup equipment on board for on-deck spills. Vessels with an overall length of 400 feet or less are required to be able to contain and remove on-deck spills of at least 7 barrels (294 gallons; 1,100 litres). Oil tankers and barges with an overall length of 400 feet or more have an increased requirement of being able to clean up spills of 12 barrels (504 gallons; 1,900 litres). Vessels carrying oil as secondary cargo must have a spill kit on board to contain and remove on-deck spills of at least 1.5 barrels ( = 63 Gallons = 238 Liters).According to several IMO resolutions "all ships should have the capability to contain and clean up minor deck and overside spills".Regulation 26 of Annex I of MARPOL 73/78 requires that oil tankers of 150 tons gross tonnage or more and all ships of400 tons gross tonnage or more carry an approved Shipboard Oil Pollution Plan (SOPEP).The International Convention on Oil Pollution Preparedness, Response and Co-operation, 1990, also requires such aplan for certain ships. These plans all includes an Oil Spill Response Kits on board.SpillCon Solutions offers the most comprehensive range of Oil Spill Response Kits available in the market. As the needscan be very different we offer our kits in different features and sizes.Background of SPCC Spill Response KitIn July 2002, the U.S. Environmental Protection Agency amended the Oil Pollution Prevention regulation at Title 40 of theCode of Federal Regulations, Part 112, (40 CFR 112).Subparts A through C of the Oil Pollution Prevention regulation are often referred to as the “SPCC Rule” because theydescribe the requirements for certain facilities to prepare, amend and implement Spill Prevention, Control and Counter-measure (SPCC) Plans.SPCC Plans are a cornerstone of EPA’s strategy to prevent oil spills from reaching our nation’s waters, and they ensurethat facilities put in place containment and other countermeasures that would prevent oil spills that could reach navigablewaters.Under EPA’s Oil Pollution Prevention regulation, facilities must detail and implement spill prevention and control meas-ures in their SPCC Plans.
  9. 9. Marine Oil Spill Kits Description 12 Barrel 7 Barrel 1.5 Barrel ART Number SCO-12 SCO-07 SCO-01 Content / Spill Kit Plastic Cart, Lid, Casters 1 1 1 Oil Only Sorbent Pads, HW, 15" X 18" (38 cm x 46 cm) 200 200 0 Oil Only Sorbent Pads, MW, 15" X 18" (38 cm x 46 cm) 600 400 200 Oil Only Sorbent Socks, 3" X 4 (8 cm x 1 m) 40 20 4 Oil Only Sorbent Socks, 3" X 96" (8 cm x 2 m) 22 8 0 Oil Only Sorbent Booms, 5" X 10 (13 cm x 3 m) 8 4 2 Oil Only Sorbent Pillows, 18" X 18" X 2" (46 cm x 46 cm x 5 cm) 20 10 3 Oil Only Sorbent Roll, HW, 36" X 144 (91 cm x 43 m) 2 1 0 Oil Only Sorbent Sweep 18" X 100 (46 cm x 30 m) 1 1 0 Protective Gloves 2 2 2 Protective Goggles 2 2 2 Tyvek Suits 2 2 2 Heavy Duty Waste Bags 10 5 1 Big Bag (for waste) 1 1 1 Shovel (Non Sparking) 1 1 1 Plastic Bucket 1 1 1 Designed to meet the SPCC requirements of 326 Gallon Pick up (1234 Liters). Up to 2600 lbs pick up (1,182 kg).
  10. 10. Spill Response Kits Qty Description 5 gallon Spill Kit Size 10 White Oil-Only HeavyWeight Pads 15” x 19" 2 White Oil-Only Sorbent Socks 3" x 4 1 Disposal Bags 30”x 6” x 60” 1 Nitrile Gloves One Size 1 Safety Goggles One Size 1 White 5 Gallon UN Pail Qty Description 30 gallon Spill Kit Size 25 White Oil-Only HeavyWeight Pads 15” x 19" 4 White Oil-Only Sorbent Socks 3" x 8 4 White Oil-Only Sorbent Pillows 18" x 18" 1 Emergency Response GuideBook One Size 3 Disposal Bags 30”x 6” x 60” 1 Pair Nitrile Gloves One Size 1 Pair Safety Goggles One Size 1 Vinyl Spill Kit Label 3” x 5” 1 30 Gallon UN Poly Drum Qty Description 50 gallon Spill Kit Size 100 White Oil-Only HeavyWeight Pads 15” x 19” 6 White Oil-Only Sorbent Socks 3" x 4 4 White Oil-Only Sorbent Pillows 18" x 18" 1 Emergency Response GuideBook One Size 3 Disposal Bags 30”x 6” x 60” 2 Pair Nitrile Gloves One Size 1 Pair Safety Goggles One Size 1 55 gallon UN Poly Drum Qty Description 95 gallon Spill Kit Size 150 White Oil-Only HeavyWeight Pads 15” x 19” 12 White Oil-Only Sorbent Socks 3" x 4 6 White Oil-Only Sorbent Socks 3" x 8 7 White Oil-Only Sorbent Pillows 18" x 18" 4 Disposal Bags 30”x 6” x 60” 1 Emergency Response GuideBook One Size 2 Pair Nitrile Gloves One Size 1 Pair Safety Goggles One Size 1 Yellow 95 gallon OverPackWe manufacture our absorbents and build our Spill kits onsite, we can custom-design a kit just for you.
  11. 11. Sphag SorbMost effective cleanup solution to cleanup problems TECHNICAL: 1 cubic ft absorbs 5-7 gallons of product Meets EPA standards for disposal in landfills Sphag Sorb will not leach: it passes TCLP at ratios much lower than competing absorbents. High BTU value for incineration Lower volume of Sphag Sorb required means lower disposal costs Reduces flammable vapors by 90% COMPARISONS: Lower moisture, higher quality makes Sphag Sorb superior to other absorbents Compared with clay, Sphag Sorb is:  10 times more absorbent  Works on land or water  One product, multi application  Contains no silica  Safe, non-toxic, non-leaching  Lightweight, low transportation cost  Vapor suppressive  Suited for land fill and incineration Sphagnum peat moss, the only ingredient in all natural Sphag Sorb Photomicrograph of a Sphag Sorb particles natural capillary and porous structure (2,750x actual size)
  12. 12. ISOLITE Porosity ControlTechnologies for making porous products and controlling itsporosity bring in a great versatility of functions and high per-formance to the ceramic fiber products.This method is applied to the diatomaceous earth productscontaining a large quantity of fossil shells with pores. Firebricksor grains of the diatomaceous earth are fired at high tempera-ture for water and oil absorbency, water retentivity, moisturecontrollability, and thermal insulation efficiency. The porousgrains also work as a carrier for microbes and catalytic agents. RemediationIsolite™, a special porous ceramic pellet that is used as the preferred and very effective biocarrierfor microbes and serves as the proppant for the fractures. The Isolite™ is inoculated with microbesand/or nutrients as it is pushed through the mixer by the hydraulic auger system with control ofboth volume and pressure
  13. 13. MOP Maximum Oil PickupMOP is an innovative, new oil absorbent made from a renewable resource that addresses all of the environ-mental concerns relating to oil spills that are possible to be addressed in an absorbent. MOP is absolutelythe lowest cost, highest performance product available for remediation of oil spills both on land and on water.MOP Maximum Oil Pickup is a unique oil absorbent made entirely from natural ingredients, 80% of which arerecycled raw materials.MOP is 100% biodegradable and is perfectly safe to humans, wildlife, plants, and the environment.Lowest in cost and environmentally safe, with its breakthrough oil pickup ratio on land or water of 30:1, withits oil separation and energy recovery options, with its bioremediation, and with its traction restoring grit, MOPis the ultimate oil absorbent of the future, and it is available now! COMPARISON OF CHARACTERISTICS & COSTS Description Absorbent Clay MOP Silica Dust Yes No Biodegradable No Yes Abrasive to Machinery Yes No Incinerable No Yes Absorbs Water Yes No Prevents Leaching No Yes Organic No Yes Dust Hazard Yes No THE SIGNIFICANCE OF FIFTY BAGS OF MOP Category 50 Bags of MOP 750 Forty Lbs Bags of Absorbent ClayPrice of Shipment: $1,600.00 $2,625.00Weight of Shipment: 1,000 lb. 30,000 lb.Storage: 112.5 ft3 997.5 ft3Lbs Oil Picked Up 30,000 30,000Weight of Waste 31,000 lb. 60,000 lb.55-Gallon Needed 71 190
  14. 14. Secondary Containment Spill Pallet containment for IBCs and Drums are economical and portable. A low profile allows safe and convenient tank handling and dispensing. SpillCon’s Hard Top Hazardous Drum Con- tainment Units have a 75 gallon capacity and drain. A Polyethylene Loading Ramp is also available. Containment Berms stop spills at the source. Collapsible wall model containment berm fea- tures rugged PVC sidewall assemblies for Snap-up support provides a sturdy side wall for excellent spill containment. The interior design boasts 100% usable space and meets U.S. regulations for spill containment.Flexible Containers Pillow and Onion Tanks are heavy-duty military/industrial type flexible fabric tanks. Collapsible and portable, they meet U.S. Federal Containment Regulations and are designed to accommodate potable and non-potable water. Custom sizes and valve assemblies available. Onion Tank
  15. 15. SNAP UP BERM Snap-up support provides a sturdy side wall for excellent spill containment 100% usable interior space 30 oz fabric is compatible for water, all hydrocarbons and most chemicals Meets EPA regulations for spill containment Grommets every 6’ in skirt allows Berm to be secured in place Simple cleaning and storage allows for repeated use Width Lengt 8"/ Gal- 8"/Out Dims 12"/ Gal- 12"/Out h lons lons Dims 10 10 493 11-4" X 11- 748 12 X 12 4" 10 20 987 11-4" X 21- 1496 12 X 22 4" 12 36 2132 13-4" X 37- 3231 14 X 38 4" 14 54 3732 15-4" X 55- 8886 16 X 56 4" US Metric Base Fabric Type PolyesterBase Fabric Weight (nominal) 8 oz/yd2 270 g/m2Thickness 36 mils min 0.91 mmWeight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2Tear Strength, Tongue D751B 120/120 lb min 534/534 N minBreaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N minLow Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 CDimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each directionAdhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm minBursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 NHydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm minBlocking Resistance ASTM D 751, 180 F/82 C # 2 Rating maxUV Resistance 8000 hrsPuncture Resistance ASTM D 4833 220 lb min 1110 N min
  16. 16. FOAM BERM Durable foam logs allow vehicles to drive over them Foam logs are covered with a fuel resistant polyethylene Easily drains through 3/4” drains 30 oz fabric is compatible for all hydrocarbons and most chemicals Easy cleaning and storage allows for repeated use Includes a patch kit and 20 extra zip ties Available in Black, OD Green, Desert Tan and Blue Width Length 2"/ Gallons 2"/Outside Dims 4"/ Gallons 4"/Outside Dims 10 10 150 10-4" X 10-4" 246 10-8" X 10-8" 10 20 239 10-4" X 20-4" 493 10-8" X 20-8" 12 36 517 12-4" X 36-4" 1066 14-8" X 36-8" 14 54 904 14-4" X 54-4" 1866 14-8" X 54-8" Base Fabric Type Polyester Base Fabric Weight (nominal) 8 oz/yd2 270 g/m2 Thickness 36 mils min 0.91 mm Weight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2 Tear Strength, Tongue D751B 120/120 lb min 534/534 N min Breaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N min Low Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 C Dimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each direction Adhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm min Bursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 N Hydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm min Blocking Resistance ASTM D 751, 180 F/82 C # 2 Rating max UV Resistance 8000 hrs Puncture Resistance ASTM D 4833 220 lb min 1110 N min
  17. 17. FLEXWALL BERM Takes only minutes to set-up; fast and easy deployment Innovative design allows driver to enter/exit without leaving the vehicle Heavy-duty 30 oz fabric is compatible for water, all hydrocarbons and most chemicals In the event of a spill, walls automatically rise Meets EPA regulations for spill containment Compact design takes very little space to store Easy cleaning and storage allows for repeated use All Flexwall Berms have patch kit included Available in Black, OD Green, Desert Tan and Blue Base Fabric Type Polyester Base Fabric Weight (nominal) 8 oz/yd2 270 g/m2 Thickness 36 mils min 0.91 mm Weight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2 Tear Strength, Tongue D751B 120/120 lb min 534/534 N min Breaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N min Low Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 C Dimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each direction Adhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm min Bursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 N Hydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm min Blocking Resistance ASTM D 751, 180 F/82 C # 2 Rating max UV Resistance 8000 hrs Puncture Resistance ASTM D 4833 220 lb min 1110 N min
  18. 18. FLEXIBLE SPILLPAN  No set up required  Durable 3” foam logs allow to drive into from any angle  30 oz fabric is compatible for water and hydrocarbons  Simple to clean and store for repeated use  Meets EPA regulations for spill containment  All Spill Pans come equip with a patch kit  Shortest lead-times in the industry  Available in Black, OD Green, Desert Tan and Blue  Custom sizes are available upon request Width Length 3"/ Gallons 3"/Outside Dims 10 10 187 10-6" X 10-6" 10 20 374 10-6" X 20-6" 12 36 807 12-6" X 36-6" 14 54 1413 14-6" X 54-6" Base Fabric Type Polyester US MetricBase Fabric Weight (nominal) 8 oz/yd2 270 g/m2Thickness 36 mils min 0.91 mmWeight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2Tear Strength, Tongue D751B 120/120 lb min 534/534 N minBreaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N minLow Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 CDimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each directionAdhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm minBursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 NHydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm minBlocking Resistance ASTM D 751, 180 F/82 C # 2 Rating maxUV Resistance 8000 hrsPuncture Resistance ASTM D 4833 220 lb min 1110 N min
  19. 19. THROW ’N GO No assembly required Walls lay flat when not in use Fastest deployment in the industry for portable spill containment sys- tems Can be driven on at any angle 2 wall availability permits smaller footprint In the event of a spill, walls automatically rise to create a catch basin Optional built-in track mats help prevent damage to the berm Berm contains no working parts which would malfunction Meets EPA regulations for spill containment 30 Oz fabric is appropriate for hydrocarbons, and most chemicals Easily emptied through 3/4" drains Available in Desert Tan; OD Green; and BlackBase Fabric Type PolyesterBase Fabric Weight (nominal) 8 oz/yd2 270 g/m2Thickness 36 mils min 0.91 mmWeight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2Tear Strength, Tongue D751B 120/120 lb min 534/534 N minBreaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N minLow Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 CDimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each directionAdhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm minBursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 NHydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm minBlocking Resistance ASTM D 751, 180 F/82 C # 2 Rating maxUV Resistance 8000 hrsPuncture Resistance ASTM D 4833 220 lb min 1110 N min
  20. 20. Capture Hazardous Spills from Railroad Tanker Cars and LocomotivesTrackMats Rail Road Track oil absorbent mats are ideal for use as railroad track mats when refueling locomotives or greasing rails or as at station sites. TrackMat widely used by transportation companies, utilities, refineries, steel mills, and in other environments in which a high absorbency barrier is required.RAIL MATS PART # DESCRIPTION UNIT/CASE QTY/PALLET SRM59100 Black Oil-Only Highly Absorbent Rail Mats, 59" x 100 1 18 SRM19100 Black Oil-Only Highly Absorbent Rail Mats, 19" x 100 2 18NEEDLE PUNCH INDUSTRIAL RUGS PART # DESCRIPTION UNIT/CASE QTY/PALLET SIR36150 36" x 150 Poly Backed, Needle Punch Synthetic Fiber 1 20 SIR36300 36" X 300 Needle Punch, Light Weight Synthetic Fiber 1 20 Big Savings for Full Pallet Orders!
  21. 21. Capture Hazardous Spills from Railroad Tanker Cars and LocomotivesTrackPansTrackPans have been designed to provide spill containment at indus-trial rail sidings, locomotive maintenance and fueling facilities. Availablein virtually any length, TrackPans may be used to collect small spills andleaks or to capture and channel off significant spills caused by defectiveequipment or a major overflow.TRACK PANS PART # DESCRIPTION UNIT/CASE SCTP9566 53 1/2" X 53 1/2" X 6" Center TrackPan with Grates Each SCTP9580 56" x 54" Cover for Center TrackPan Each SCTP9576 53 1/2" x 27 1/2" x 6" Side TrackPan with Grates Each SCTP9581 56" x 27 3/4" Cover for Side TrackPan Each Low Maintenance - Unlike carbon steel track pans, TrackPans will not rust or corrode, Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun, Low Cost Installation - Lightweight TrackPans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required. Slip Resistant Surfaces - Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. Long Work Life - Estimated to perform for 20-30 years; longer than fi- berglass pans. . Meets SPCC and EPA Stormwater Management Regulations.
  22. 22. PILLOW TANKS  Heavy duty military/industrial style fabric tanks  Collapsible and Portable with custom sizes available  Designed to accommodate potable and non-potable water & fuel  Custom valve assemblies available  Fast and easy deployment  Standard color—Desert Tan , other colors available upon request Part # Gallon Flat Fill Color Capacity Dimensions Height PT100-T 100 gal 5’x50” 11” Desert Tan PT500-T 500 gal 8’x7’4” 20” Desert Tan PT1000-T 1,000 gal 9’7”x9’7” 26” Desert Tan PT3000-T 3,000 gal 13’9”x13’9 38” Desert Tan PT5000-T 5,000 gal 16’8”x16’ 44” Desert Tan PT10000-T 10,000 gal 21’3”x20’ 55” Desert Tan PT20000-T 20,000 gal 27’3”x27’ 60” Desert Tan DRIP PILLOW No set up required Use for small engine leaks A 6-pound weighted base keeps the berm in place Optional disposal absorbent pads make for easy clean up and repeated use Meets U.S. regulations for spill containment Available in Yellow, OD Green, Desert Tan, and Black Part Number Length Width Weight ENDP1919 22” 22” 6 lbs
  23. 23. ONION TANKS Roll Top Onion Open Top Onion Tank Zipper Top Onion Tank  Suitable for potable and non-potable water storage  Stable on any slope up to 10%  Ground cloth acts as a carrying bag  Self-supporting  Quick set-up and take down  2” male and female cam-lock fittings  Lid reduces contamination and evaporation  Color and additional sizes available upon request Capacity NSN# Capacity NSN# Capacity NSN#1,000 gal — 1,000 gal 5430-01-526-2212 1,000 gal —1,5000 gal — 1,500 gal — 1,500 gal 5430-01-527-03413,000 gal 5430-01-542-5905 3,000 gal — 3,000 gal 5430-01-540-53575,000 gal — 5,000 gal — 5,000 gal —
  24. 24. Response & Deployment SpillCon’s Response & Deployment products are cutting edge technology insuring Rapid contain- ment of oil spills.Safety Products A comprehensive assemblage of safety products complements SpillCon’s high-quality Spill Con- trol and Containment products.
  25. 25. STORMWATER MANAGEMENTThe Drain Guard is installed in a catch basin and is held in place by the drain’s grate.Stormwater runoff enters the Drain Guard and is directed toward the pouch by a skirt made of anon-woven polypropylene, needle-punched, geotextile material. This fabric filters the pollutantsfrom the water stream as it passes over and flows through the material.Additionally, each Drain Guard is equipped with numerous "Filter Strips" made of "X-TEX", aunique filter material made of recycled synthetic fibers. X-TEX is extremely effective in capturingand removing hydrocarbons and other pollutants from stormwater. Oil & Sediment Model: 48" x 36" Oil & Sediment Plus Model: 48" x 36" Dimension : Dimension : Part# 9219: 48"L x 36"W x 18"H (1-Pack)(1220 mm x Part# 9217: 48"L x 36"W x 18"H (1-Pack)(1220 mm x 915 mm x 458 mm) 915 mm x 458 mm) Part# 9220: 48"L x 36"W x 18"H (10-Pack) Part# 9218: 48"L x 36"W x 18"H (10-Pack) Performance : Performance : Oil: Up to .87 gallons (3.5 L) Oil: Up to 1.38 gallons (5 L) Sediment: Up to 40 lbs. (18 kg) Sediment: Up to 40 lbs. (18 kg) The total water flow rate through the insert in new condition is in excess of 500 gpm. The bypass rate is approxi- mately 700 gpm. Oil & Sediment Model: 60" x 60" Oil & Sediment Plus Model: 60" x 60" Dimension : Dimension : Part# 9358: 60"L x 60"W x 18"H (1-Pack)(1524 mm x Part# 9356: 60"L x 60"W x 18"H (1-Pack)(1524 mm x 1524 mm x 458 mm) 1524 mm x 458 mm) Weight: 2 lbs. (1 kg) Weight: 3 lbs. (1.5 kg) Performance : Performance : Oil: Up to 1.55 gallons (5.9 L) Oil: Up to 2.06 gallons (7.8 L) Sediment: Up to 40 lbs. (18 kg) Sediment: Up to 40 lbs. (18 kg) The total water flow rate through the insert in new condition is in excess of 900 gpm. The bypass rate is approxi- mately 700 gpm. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
  26. 26. Dewatering BagContain Sediment And Oil Pumped Out During Dewatering Operations. Detains both oil and sediment, Standard and custom sizes available. DEWATERING BAG® Dimension Capacity 6 cu ft (170 L) 3 x 4 (915 mm x 1,220 mm) 18 cu ft (510 L) 6 x 6 (1,829 mm x 1,829 mm) 150 cu ft (4,247 L) 10 x 15 (3,048 mm x 4,572 mm) 225 cu ft (6,371 L) 15 x 15 (4,572 mm x 4,572 mm)Dewatering Bag Reusable DEWATERING BAG® Description Dimensions ft (mm) Weight lbs. (kg) Bag with Locking Rods 3 x 5 (915 x 1,524) 19.0 (9.0) Bag with Locking Rods 5 x 7 (1,524 x 2,134) 21.0 (9.5) Locking Rods only --- 13.0 (6.0) Replacement Bag 3 x 5 (915 x 1,524) 4.0 (2.0) Replacement Bag 5 x 7 (1,524 x 2,134) 6.0 (3.0) Pipe Sock PIPE SOCK ® Dimensions Oil absorption capacity 0.81 Gallons60"L, fits 8" Dia. Pipe.(204 mm dia., 1,524 mm L) 1.22 Gallons60"L, fits 12" Dia. Pipe305 mm dia., 1,524 mm L) 1.63 Gallons 60"L, fits 16" Dia. Pipe(407 mm dia., 1,524 mm L)
  27. 27. ROC BARRIER™WORLD’S FASTEST RESPONSE OIL CONTAINMENT SYSTEMUsing innovative technology, the ROC BarrierTM is deployed at speeds of up to 54.7 kilometers(34 miles) per hour1, over five times faster than conventional oil containment booms.The ROC BarrierTM is the only available oil containment system small enough to allow tank-ers, ships and other watercraft, as well as marinas, harbors, ports, shipping lanes, beaches,and other water entry points to store it on site so that it can be deployed quickly following an oilspill. The canister, which holds the film laminate used to contain an oil spill, measures just 20inches in length, by eight inches in width, and eight inches in depth. Products ROC Barrier 1000 System ROC Barrier 2000 System ROC Barrier XL1000 System ROC Barrier Spill Cling Pad
  28. 28. SPILLWATCH AUTOMATED NON-CONTACT OIL SPILL DETECTION AND ALARM Real-time around-the-clock detection and control of oil spills for  Petrochemical industry, pipelines  Harbors  Desalination, intake protection  Aquaculture Fresh, brackish or saltwater environments Highly effective LED-based excitation Cost effective, low maintenance Non-contact measurement Flexible configuration of data output Multiple interfaces network connectivity Ruggedized design (IP66)OverviewThe detection of petroleum products, including crude oil, diesel/fuel oil, motor oil, lube oil, gasoline, food oils etc.near the water surface is widely required in industrial and environmental applications.TechniqueThe SpillWatch sensor is installed downward looking several meters above water level. The sensor technology isbased on fluorescence excitation and detection.ActionIn case of a spill, the SpillWatch provides an instant warning, enabling users to activate counter measures, e.g.shutting off pumps or valves and notify personnel via a variety of interfaces and wireless options. SpillWatch sen-sors can be used as stand-alone monitors or within a network of strategically mounted sensors interconnected bythe SpillMaster software.
  29. 29. NEW OIL IN WATER MONITORING BUOYCompact and rugged buoy system is designed for short term moni-toring (up to 24 months). The lightweight and low-cost buoy is easilyhandled by one person in the field, weighing just 25kg, and beingonly 60cm in diameter and 2.0m in overall length.Detection of hydrocarbons in the water column is performed by asubmersible sensor. Sensors are available for both crude oil andrefined fuels, and are protected from collision damage within the ro-bust central structure. Applications: • Refineries • Ports/Harbors • Marinas • Offshore sites • Outfall MonitoringThe system itself is powered by two 5W solar panels, and is equipped with battery backup, navigation and warninglights, and any other markings as necessary. A range of telemetry options are available (UHF/VHF, GSM, GPRS,Satellite), selected to suit both the location and application requirements.
  30. 30. THE ONLY CORER TO COLLECT AN UNDISTERBED SAMPLEThe range of multiple corers are simple, reliable corers for collecting multiple samples of virtually undisturbed sedi-ment, including the sediment/water interface, and overlying supernatant water. A range of models is available to sam-ple up to 12 cores in a single deployment. Used for soft sediment sampling in chemical, geochemical and biological applications. Unique hydrostatic damping system slows the penetration rate to approx. 1 cm/s, Undisturbed sediment sample with overlying supernatant water provides a unique insight into the sediment water interface. Corer deployment rates: descent - approx. 1 m/s , penetration – approx. 1 cm/s, retrieval – winch speed Samples are positively sealed, being capped both top and bottom, preserving the integrity of the samples. The rugged frame of the corer is made of 316 stainless steel and marine grade brass. The core tubing can be manufactured from acrylic, poly carbonate or stainless steel, depending on requirements. Ideal for rapid assessment work.
  31. 31. Spill Detection - Marine & Land Operating 24/7, the SpillWatch system is used for the detection of petro- leum products including; crude oil, diesel/fuel oil, motor oil, lube oil, gaso- line, and food oils near the water’s surface. A real-time alert enables imme- diate countermeasures. By limiting damage to the environment and reduc- ing costs for remediation and clean-up assures an immediate ROI. SpillCon’s Oil in Water Monitoring Buoy ensures real-time data collec- tion when an environmental condition requires monitoring. The buoy is designed to alert users when increased hydrocarbon levels occur, or when changes in water quality develop. A single point mooring allows for easy deployment and recover. Best-in-class Corers collect multiple samples of virtually undisturbed sedi- ment, including the sediment/water interface and overlying supernatant wa- ter. An innovative hydrostatic damping system is at the heart of the system that slows the penetration rate down to approximately 1cm/s, eliminating the typical bow wave seen by other, less sophisticated corers. Detection Response Deployment Containment Clean-Up Remediation P r ou d S up pl i e r Distribution Centers Houston, TX Chicago, IL An ENCO Industries Company Newark, NJ www.encoind.com Boston, M A 4 Wilder Drive, #7 Plaistow, NH 03865 USA 1.603.382.8481 info@spillconsolutions.com © Copyright 2012 ENCO Industries. All rights reserved. The SpillCon Solutions logo is a trademark of ENCO Industries. www.spillconsolutions.com All other logos, products, and company names are trademarks of their respective owners. Printed in the U.S.

×