Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Designing the ovitraps
   Material Needed       A small container       A ring mesh                2
   Upper part of water    bottle   Lower part of water    bottle with holes on    both sides
   Inside water reservoir    bottle   Bottom hole
ASSEMBLING THE TRAP                                                         AStep A•Take the bowl and put the rounded mesh...
ASSEMBLING THE OVITRAP Cover the lower half of  the bottle with the upper  half The trap is now ready  for placement .
Upcoming SlideShare
Loading in …5
×

Designing Ovitrap

3,445 views

Published on

  • Be the first to comment

Designing Ovitrap

  1. 1. Designing the ovitraps
  2. 2.  Material Needed  A small container  A ring mesh  2
  3. 3.  Upper part of water bottle Lower part of water bottle with holes on both sides
  4. 4.  Inside water reservoir bottle Bottom hole
  5. 5. ASSEMBLING THE TRAP AStep A•Take the bowl and put the rounded meshring inside the bowl•Fill the bowl with water and observe therounded mesh ring will rise in the bowl to thelevel of water. BStep B•Put the lower half of the bottle inside thebowl and press for short time till the lower Chalf of bottle is filled with water.Step CPut the inside water bottle filled with waterinside the lower half of the bottle. This willhelp to supplement water incase its leveldrops down.
  6. 6. ASSEMBLING THE OVITRAP Cover the lower half of the bottle with the upper half The trap is now ready for placement .

×