A400 elite uk

390 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
390
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

A400 elite uk

  1. 1. FICHE PRODUIT Product Information SETEM BRAIME A400 ELITE A400 ELITE Elevator Belt Alignment Monitoring System A4004V4CAI - A400 Elite control unit Supply: 12 to 24 DC Ex II 2D T125°C zone 21 & 22 A4004V46CAI - A400 Elite control unit Supply: 95 to 250VAC /12 to 24 DC Ex II 3D T125°C zone 22 APPLICATION The A400 Elite is a control unit that detects dangerous misalignment of buckets and belt. The A400 Elite monitor works with up to four sensors (BAP2, WDA3 or WDA3HT) depending on the size and type of elevator. It monitors sensors mounted on the elevator that generate a pulse for each metallic bucket or bolt. If the elevator belt becomes misaligned, one of the probes will fail to detect the buckets or bolts, the control unit will cause the alarm relay to energise and, after a delay, the stop relay will de-energise. FEATURES ATEX zones 21 & 22 The A400 Elite monitors the alignment of the belt in one elevator, at both the top and the bottom, or in two separate bucket elevators Alarm and Shut down Relays with time delay options Control unit LEDs indicate the running, alarm and shutdown status of each elevator Easy on-site Installation Full system test feature Voltage free relay contacts IP 66, Nema 12 CLASS 2 Div. 2 ATEX, IECEx & CSA Approved Groups E,F, & G OPTIONS RS485 serial communication Detailed specification, wiring diagrams and installation/operating instructions available upon request. Please refer to instruction manual for correct installation. Information subject to change or correction. February 2006. 4B BRAIME ELEVATOR COMPONENTSLTD Hunslet Road, Leeds, LS10 1JZ,UK Tel:+44 (0) 113 246 1800 Fax: :+44 (0) 113 243 5021 elevator@braime.co.uk www.go4b.com
  2. 2. FICHE PRODUIT Product Information SETEM BRAIME A400 ELITE TECHNICAL SPECIFICATIONS Model A4004V46CAI A4004V3CAI ATEX & IECEx Zone 22, Ex II 3D ATEX & IECEx Zone 21Ex II 2D T125°C T amb -15 to +50°C T125°C T amb -15 to +50°C Approval BAS03ATEX0674X & CSA BAS03ATEX0674X & CAI Enclosure Polycarbonate Supply 95 to 250 VAC 12 to 24 VDC 12 to 24 VDC Rating 10 VA Protection IP 66 Contact relay ALARM A: 1 contact NO 8 A 250 Vac ALARM ALARM B: 1 contact NO 8 A 250 Vac Contact relay STOP A: 1 contact NO 8 A 250 Vac STOP STOP B: 1 contact NO 8 A 250 Vac Dimension HxLxD :246x 188 x 102 mm Entry 2 drill dia. 28 mm Fixt point 222 x 102 mm Weight 1,3 Kg BAP21V34CA WDA3V34CA WDA HT Please refer to instruction manual for correct installation. Information subject to change or correction. February 2006. 4B BRAIME ELEVATOR COMPONENTSLTD Hunslet Road, Leeds, LS10 1JZ,UK Tel:+44 (0) 113 246 1800 Fax: :+44 (0) 113 243 5021 elevator@braime.co.uk www.go4b.com

×