Zest ENGINEERING

Water
A water meter is a device
used to measure the volume
of water usage. water meters
are used to meas...
DOMESTIC WATER METER

(HOT &COLD)
SINGLE JET/MULTI JET
class A & Class B .
size(15mm to 50mm)
FEATURES
•Cold water 0°-30°C...
LIQUID TURBINE FLOW METER
Specification
Size: 4”~20”
Temperature:-20C~120C
Output:4~20mA DC and Pulse(Standard)
Accuracy:+...
Gas Turbine Flow Meters
Specifications
Material: Stainless Steel/Aluminum

Turbine gas meters infer gas volume by determin...
OIL Meters
Flow Rate

3

10 Lt/ Hr - 48M / Hr
o

Temperature

Upto 150 C

Pressure

0-21 Kg/ cm (Optional 40 Kg/ cm )

Vis...
RTD/Thermocouple	
  

Type of Pressure Gauges.

Pressure Gauges

Normal Pressure Gauges
Oxygen Pressure Gauges
Vibration F...
Upcoming SlideShare
Loading in …5
×

Zest product Catalogue

1,596 views

Published on

With a globally spread client base to serve to, Zest Engineering has emerged as one of the major Exporters and Suppliers of a wide range of products. The company offers Industrial Flow Meters, Industrial Strainers, Rotameters, Water Meters, Water Activity Meters, Industrial Valves, PVC Pipes, Pressure Gauges and RTD Thermocouples. The products range, offered by the company, is widely known among the clients for highlights like low maintenance, optimum efficiency, longer operational life and excellent performance. The company can offer paid samples and also offers after-sles services to the clients.

Published in: Marketing, Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,596
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Zest product Catalogue

  1. 1. Zest ENGINEERING Water A water meter is a device used to measure the volume of water usage. water meters are used to measure the volume of water used by residential and commercial building that are supplied with water by a public water supply system. Oil Oil meters used for this purpose can measure and records the flow precisely. Oil metering is essential for widespread areas like industrial usage, automotive usage and marine. Our products provides you with the advanced quality control www.zestengg.co.in OUR PRINCIPALS OVAL JAPAN ITRON Sure flow-japan Greentech –Japan Ashlin Enterprises. Zenner –Aqua met. B-Meter KENT POINTER ROTRONIC Gases A gas meter is used to measure the volume of fuel gases such as natural gas and propane. Gas meters are used at residential, commercial, and industrial buildings that consume fuel gas supplied by a gas utility. Strainer A device through which a liquid is passed for purification, filtering or separation from solid matter; anything any device functioning as a sieve or filter - in special, a perforated screen or openwork (usually at the end of a suction pipe of a pump), used to prevent solid bodies from mixing in a liquid stream or flow line. Email-Sales@zestengg.com
  2. 2. DOMESTIC WATER METER (HOT &COLD) SINGLE JET/MULTI JET class A & Class B . size(15mm to 50mm) FEATURES •Cold water 0°-30°C •Hot water 30°-90°C •Max working pressure 5 bar •Mechanical transmission. • Direct reading by numerical rolls. • Low Head Loss Pulse Output Water Meter (HOT &COLD) SINGLE JET/MULTI JET class A & Class B . size(15mm to 500mm) Woltmann Type Water meters (HOT &COLD) Woltmann Water meter class A & Class B . size(50mm to 500mm) FEATURES FEATURES •Cold water 0°-30°C •Cold water 0°-30°C •Hot water 30°-90°C •Max working pressure 16 bar •Mechanical transmission. • Direct reading by numerical rolls. • Low Head Loss •Hot water 30°-90°C •Max working pressure 16bar •Mechanical transmission. • Direct reading by numerical rolls. • Low Head Loss A Electromagnetic flow meter Electromagnetic flow meter, composed of sensor and converter, works based on Faraday's law of electromagnetic induction. It is used to measure electrical conductivity of liquid or solid. Generally, the electrical conductivity should be over 5uS/cm (electrical conductivity of tap water, raw water is about 100-500uS/cm.It can also be used to measure various mediums like acid, alkali, saline solution, paper pulp, ore pulp and so on, but these mediums can't contain a lot of magnetic materials and B Size-Dn15 - Dn1000 Electrode  Material  -­‐  316L,Hc,  Hb,  Ti,  Ta   Application   Liner  Material  -­‐  Neoprene,  PTFE,  PFA,  F46   Effluent Treatment Plants Conductivity  -­‐  Greater  or  Equal  5  μs/cm     Water Supply Schemes  Accuracy  -­‐  +/-­‐0.5%  of  the  value  displayed   Food & Drug Industry Protection Class - IP65, IP67 Dairy Industries Measuring Range-0.2 ~ 28000 m3/h Corrosive Liquids Pow. Supply - 3.6 V lithium battery.          Sugar  Industry   Type- Flange type /Inserted type / Battery operated/ Integral type/ Triclover Type. www.zestengg.co.in ZEST   Email-Sales@zestengg.com 2 C
  3. 3. LIQUID TURBINE FLOW METER Specification Size: 4”~20” Temperature:-20C~120C Output:4~20mA DC and Pulse(Standard) Accuracy:+/-1.0% Connection: Screwed or Flange Power Supply AC 85~230V, 50/60Hz or DC 24V or Battery (3 year) Operating Temperature -20 ~ 120 Deg C Ambient Temperature -20 ~ 50 Deg C Accuracy ±1.0 %, ± ± 0.5% Output Signal 4~20mA DC and Pulse (Standard) Display LCD 2 Line x12 character (Rate Flow /Total Flow)   Clear Liquid, Gases ,Air, solvent. Flange IP67,IP65                     Turbine Flow meter     A Screwed and Flange (As per standard) Enclosure     Service     B       D C www.zestengg.co.in Email-Sales@zestengg.com 3
  4. 4. Gas Turbine Flow Meters Specifications Material: Stainless Steel/Aluminum Turbine gas meters infer gas volume by determining DN range (mm): DN15-DN200 Output: Pulse/current4-20Am/RS-485 the speed of the gas moving through the meter.   Accuracy: 0.5% / 1%   Application   Internal  measurement   Coal  Gas     Liquefied  Gas     Light  hydrocarbon  Gas   Petroleum,  chemical   Industries   Sewer  Gas     Diaphragm Type flow METERS Operating Pressure Max - 6 bar Flow range (m³ / h): 1.0-3600 Power supply: 220VAC / 24VDC Medium temperature (centigrade): -30-65 Ambient temperature (centigrade): -20-80 Atmospheric pressure: 86-106KPa Nominal Pressure: 1.6, 2.5, 4.0, 6.4MPa A Technical specifications: Features: 1) High sensitivity,   2) high accuracy 3) Good stability and reliability 3) Low maintenance 4) Digital Display. 5) Pulse Out put. 6) Avaible-G1.6/G4 G16   GTFM 1) Nominal flow rate: 1.6, 2.5m /h         3 2) Maximum flow rate: 2.5, 4m /h    3 3) Minimum flow rate: 0.016, 0.025m /h         4) Operating pressure range: 0.5 ~ 3kPa         5) Accuracy: B grade 6) Basic error limit: Qmin≤Q<0.1 Qmax, ±3% 0.1 Qmax     3 ≤Q≤Qmax, +/-1.5%. 7) Total Press Loss:< 250Pa             7) Operating Temperature:-10-+40deg                                      Application   Features: Vortex Flow Meter * Size: DN 25 to DN 3000 * Service: Liquid / Gas / Steam           Stable long term accuracy and repeatability B D D   C No routine maintenance required * Pressure: 25 bar Lower cost of installation than traditional orifice-type meters * Output Signal: 4-20 mA Reduced possibility of process fluid leakage * Communication Interface: RS485 . No moving parts to wear No special protection needed against extreme weather condition * Accuracy: + / - 0.5%, + / - 1% * Repeatability: 0.2% • • Thermal mass Flow meter • • • •   Features: * Protection: IP 65 / IP 68. www.zestengg.co.in     Vortex Flow Meter           :Compressed air flow and distribution :Carbon dioxide for chilling and fermentation :Argon in steel making :Nitrogen and oxygen production plants :Natural gas for burner and boiler feed control :Aeration air and bio gas in waste water D E 4   * Size: Inline: DN 4 to DN 300 * Insertion:DN 40 to DN 2000 (Max DN 3000) * Measuring range: 0.5 ~ 60 m/s * Service: Gas (except for acetylene) * Pressure:25 bar (High Pressure : 200 bar) * Accuracy: + / - 0.5%, + / - 1% * Repeatability:0.2% Email-Sales@zestengg.com F
  5. 5. OIL Meters Flow Rate 3 10 Lt/ Hr - 48M / Hr o Temperature Upto 150 C Pressure 0-21 Kg/ cm (Optional 40 Kg/ cm ) Viscosity 1000 CP maximum Accuracy Nominal Bore Size Within +(-) 0.5% (Optional +(-) 0.2% Liquids Petroleum Products (MS, HSD, SKO, LDO, FO, LSHS). Totalisation of flow (Mechanical Counter) – Optional Electronics 2 Output Oil flow meters are approved by Government of India, Department of Legal Metrology (Weights & Measures).   Application     2 15 mm, 20 mm, 25 mm, 40 mm, 50 mm, 80 mm     Easy to connect with previous systems due to its high compatibility .   Indication through 8-digit LCD display Wide range of flows and maintaining of high level of accuracy Easy to install due to its dimension conforming to previous products. Monitoring Oil Consumption   Pressure, temperature and viscosity options   Oval  Gear  Flow  meter Specification Oval gear positive displacement technology Accuracy +/-0.5% on pulse models, +/-1% on mechanical Suitable for lubricant, fuels and chemicals. Available for flow ranges from 2 to 1200 litres per minute Pipe sizes from 1/2" to 4" with BSP and flange connections Mechanical and electronic display options Pulse output and 4~20mA output models Application   Petroleum Chemical Medicine Shipping Food Syrup Greases Commercial department Solvent Multiple construction material options Pressure, temperature and viscosity options LC Series oval gear oil flow meter, the main type of positive displacement flow meters is used to measure pressure in the pipeline closed under full pipe flow of the fluid flow. It has good adaptation and essentially unregulated measuring temperature, pressure change STRAINER and easy of installation. ZE ST Type of Strainer Simplex Basket Strainers Duplex Basket Strainers Y Type Strainers T Type Strainers Temporary Strainers Bag Filters         M.O.C. Housing Casted - C.I./C.S./S.S./G.M. Fabricated- M.S./S.S/P.P. Fiber/others on request Element- SS 304/SS, 316/Brass, Paper, Sintered. Size Range Casted - NB ½ “ to 1 ½” Screwed, BW, SW NB ½” to 8” Flanged Application     Pumps Engines Flow meter Boilers Turbine RO Plants Fabricated- NB ½” to 4” Screwed NB 1” to 60” Flanged www.zesteng.co.in Email-Sales@zestengg.com 5  
  6. 6. RTD/Thermocouple   Type of Pressure Gauges. Pressure Gauges Normal Pressure Gauges Oxygen Pressure Gauges Vibration Free Pressure Gauges LPG Pressure Gauges CNG Pressure Gauges Specification RTDs may be purchased with 2, 3, or 4 lead wires Dial Size : 2 ½", 4", 6" , 8", 10" Extending from the sensor. In determining the Case & Bezel : SS 304/ Die Cast Aluminum Weather Proof number of wires, consideration of the following is Pointer : Micro Zero or center zero adjustable Important: Bourdon Material : SS 316/Brass • Stability Specifications RTD type thermocouple, Industrial thermocouple, • Receiving device location 1.J, S, K, PT100 type • Corrosion potential - environmental 2.water-proff/explosion-proof • Required accuracy conditions Socket Material : SS 316/Brass Entry : Bottom Back Mounting : Direct, Panel, Surface Connection : ¼", 3/8", ½", ¾ " and 1" BSP, NPT, Metric thread, Male/Female, adj./fixed Accuracy : + 1% of F.S.D. • Nominal sensor range and resistance Over Range Protection : 125 % of F.S.D. A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Type of Valves Gate Valve Ball Valve Sluice gate valve Check Valve Safety Valve Check Valve Butterfly Valve Valves Type  of  Pipes   Sanitation System Pipes Plumbing System PVC Pipes ZEST ENGINEERING DE-58, SECTOR-3, INDUSTRIAL AREA- BAWANA NEW DELHI- 110039 INDIA Calls Us -+91-8800445945 Land line- 011-41561415 Email-new@zestengg.com Visit us-www.zestengg.co.in Sales office. ZEST ENGINEERING RAJAN NIWAS, NEAR M.C. OFFICE, RAJGARH ROAD. SOLAN (H P) Pin Code - 1732132 Phone- +919760158775 Email-sales@zestengg.com Visit us-www.zestengg.co.in Agriculture System PVC Pipe Sales Office Zest Engineering 162,Sarla Bagh Dayal Bagh Agra 282005 Phone-9997098945 We  have  the  right  to  modify  the  above  written  words  without  any  notice.

×