Section 1 - COYOTE Closure Series

684 views

Published on

Section 1 - COYOTE Closure Series

Published in: Education, Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
684
On SlideShare
0
From Embeds
0
Number of Embeds
35
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Section 1 - COYOTE Closure Series

  1. 1. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1Section 1 – COYOTE® Closure SeriesTable of Contents PageCOYOTE Closure Overview ....................................................................1-2COYOTE GLC (Ground Level Closure) ..................................................1-4COYOTE Dome Closure ..........................................................................1-9COYOTE In-Line RUNT..........................................................................1-10COYOTE Terminal Closure – Dual Chamber.......................................1-11COYOTE Terminal Closure – Single Chamber....................................1-12COYOTE Terminal Closure ...................................................................1-13COYOTE Aerial Drop Closure...............................................................1-15COYOTE LCC (Low Count Closure).....................................................1-16COYOTE Splice Tray Capacity Charts .................................................1-18COYOTE Silicone Grommet Kits ..........................................................1-20COYOTE DTC (Drop Termination Closure) .........................................1-21COYOTE Taut Closure ..........................................................................1-22COYOTE RUNT Closure ........................................................................1-23COYOTE PUP Closure...........................................................................1-24COYOTE Closure ...................................................................................1-25COYOTE Closure End Plates and Accessories ..................................1-27COYOTE Cross-Connect and Cross-Connect/Express Closure .......1-33COYOTE Drop Cable Closure ...............................................................1-36COYOTE Closures for High Fiber Count Applications ......................1-37COYOTE Retrofit Closure .....................................................................1-38COYOTE Closures (ADOBE™ Series) ...................................................1-39
  2. 2. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE Closure Overview ® Choose a member of the COYOTE Closure Family that Best Suits your Application...... It all began with the development of a new breed of fiber optic unique solutions to the varied requirements of an ever-evolving closure. Craft friendly. Easily installed. Competitively priced. fiber optic network. From aerial to underground to every step And designed to go wherever fiber optic cable takes you. Over of the last mile, the COYOTE family of fiber optic closures is the years the philosophy has remained constant, and the fam- there to provide performance you can count on. ily has grown with each successive member offering its own COYOTE GLC (Ground Level Closure) COYOTE Terminal Closure (Dual Chamber) (Page 1-11) Pedestal System (Page 1-4) T h e C OYO T E The COYOTE GLC Pedestal Terminal Closure is System is the first truly her- available in two metically sealed pedestal configurations – system. With its patented Dual and Single segmented end plate design, Chamber: it allows you to make adjust- ments on site or move to an The unique dual enclosed work environment. chamber design The design also permits a RUS LISTED provides two dis- high volume of uncut slack tinct chambers that cable storage if needed. can be configured differently to support up to 24 externally mounted hardened connections, internally mounted cross- RUS LISTED connect bulkhead connections or a combination of both. A window designed within the closure interior allows fibers to COYOTE Dome Closure (Page 1-9) be passed between chambers. High drop capacity out each T h e C OYOT E D o m e of the eight cable ports and the ability to use standard or Closure was specifically hardened adapter covers, provides infinite options to support designed for applications your network design. where a domed-st yle configuration is preferred. COYOTE Terminal Closure (Single Chamber) (Page 1-12) It features an innovative The COYOTE Terminal end plate design with Closure (Single Chamber) segmented sections that is the ideal choice for net- allow for individual access work designs requiring RUS LISTED of each cable without hardened adapter termina- disruption to surrounding tion. Externally mounted cables. A full line of multi-hole grommets ensures the ultimate OptiTap* hardened adapt- level of flexibility to meet the demands of ever evolving ers allow for future instal- communications networks. RUS LISTED lation of up to 12 hardened drops without closure reentry. Compact size allows the closure COYOTE In-Line RUNT (Page 1-10) to be installed into pedestals and small hand holes. Additional The COYOTE In-Line RUNT drop capacity through the 4 entry ports of the closure base, Closure has the versatility and provide added flexibility for the closure to act as a distribution features that make it a perfect point for closures deeper in your network. choice for distribution, node and fiber to the premises networks. COYOTE Aerial Drop Closure (Page 1-15) The compact size allows the The COYOTE Aerial closure to be installed into ped- Drop Closure is a estals and small hand holes, value priced solution. keeping your installation costs Features include its down. High drop capacity and compact size and RUS LISTED the capability to be converted to ease of installation – a terminal closure will allow room no special tools need- for expansion long after the ed. It is capable of initial installation. higher splice capaci- ties and is designed for PLP’s easy-to-use grommet system. Included is the universal mounting bracket, which permits pole mounting with straps, strand mounting with strand clamps or suspension from “J” hooks secured to a pole.1-2 *OptiTap™ is a trademark of Corning Cable Systems.
  3. 3. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1COYOTE Closure Overview ® Closure Overview COYOTE®COYOTE LCC (Low Count Closure) (Page 1-16) COYOTE Closure (Page 1-25) The COYOTE LCC is Setting the bar against which all designed specifically other fiber closures are measured for low fiber count in- was no small task for our design stallations and repairs team. But years of research & within your Fiber-to- development eventually paid off in the-Home, Node or the form of a rugged and reliable Curb deployments. design that has become legend. The closures compact After over ten years of field use and RUS LISTED size, use of the versa- several hundred thousand units tile grommet system sold, the original COYOTE Closureand internal LITE-GRIP® Splice Platform, make this rugged still remains one of the most highlyclosure the economical choice for your network. Designed with RUS LISTED regarded and widely used fiberease of use in mind and maximum versatility. Kits have also optic closures in the industry.been created to support copper applications. COYOTE Cross-Connect and Cross-Connect/COYOTE DTC (Drop Termination Closure) (Page 1-21) Express Closure (Page 1-33) This new closure design is The COYOTE Cross-Connect constructed to support butt or C l o s u re wa s d e s i g n e d fo r inline low count splice applica- applications requiring connector- tions in a direct buried or below ization or cross connecting in the grade environment and pole/ outside plant network. Addition- wall mounted applications ally, the COYOTE Cross-Connect/ near the end of you network. Express Closure was configured The closures’ compact size to allow for convenient and safe and rugged exterior allow for storage of uncut buffer tubes ininstallation in tight spaces without compromising functionality. the feeder cable, while providing individual connectivity to the fibersCOYOTE Taut Closure (Page 1-22) of the drop cables. The COYOTE Taut Closure simplifies branch cable taps or repairs of taut fiber optic COYOTE Retrofit Closure (Page 1-38) cables. Features the innova- The COYOTE Retrofit Closure is tive End Plate from the Dome the right choice for replacement or Closure and full line of multi expansion of existing fiber optic hole grommets. closures.COYOTE RUNT Closure (Page 1-23) T h e c o m p a c t C OYOT E COYOTE® MPC (Multi-Purpose Closure) (Page 16-3) RUNT Closure is ideal for low The COYOTE MPC focuses fiber count, (up to 48 splices), on the MDU environment, end-of-the-line, node and fiber- providing a flexible platform to-the-curb installations. It will to address the multitude of easily fit into most pedestals applications that exist in and hand holes, and the rug- residential and commercial ged design allows it to be used FTTx installations. Con- in all environments. structed of durable, UV RUS LISTED stabilized, flame-retardant RUS LISTED polymer, the closure permits interior or exterior applica-COYOTE PUP Closure (Page 1-24) tions. Accepting an easy-to-use grommet system and standard The COYOTE PUP Closure commercially available fittings, eight cable entrance ports are offers the perfect choice for low available around the closure exterior. The MPC’s interior fiber count distribution applica- can be configured to address slack storage, splicing, cross tions involving butt and inline connect, hardened adapter application or a combination of installations.The compact size all. In addition, to minimize installation labor, the closure is and rugged design allow the available in pre-terminated configurations. closure to be applied in below grade, aerial and buried instal- lations. Supported by a full line of COYOTE accessories, this RUS LISTED closure can grow along with 1-3 your network.
  4. 4. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE GLC (Ground Level Closure) ® The innovation and reliability ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ PLP Feature Focus you have come to expect from ©2009 Preformed Line Products ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ PLP since 1947 Film available at www.preformed.com PLP Introduces the COYOTE® GLC (Ground Level Closure), the first truly hermetically sealed pedestal system and the only pedestal system with PLP’s patented segmented end plate design. GLC is the first design that doesn’t force you to work where it’s installed and this unique design permits a high volume of uncut slack cable storage if needed. Key Features: • Compact: 9.5" x 17" Dome Enclosure secures to a 19.5" L x 19.5" W x 13" H Base • Cost Effective: Blended design eliminates the need to purchase separate components • Sealable, Re-Enterable, & Re-Usable: Utilizes the same silicone grommet sealing system and segmented end plate design that is found throughout the COYOTE Dome Closure Family • Transportable: Slack storage of uncut cable allows dome enclosure to be carried to a splice truck or other suitable working environment • Adjustable: Stackable spacer system adapts to the base for changing grade levels • Independent Grounding System: Accessible isolated grounding system that allows ground testing to occur without entering the splice enclosure • Durable: Manufactured out of a flame and impact resistant polymer • Securable: Collar latch mechanism allows attachment of different security devices • Modular: Split design allows parts to be added or replaced without disrupting other assembled components • Customizable: Create the closure that fits your application needs RUS LISTED • Patent Pending1-4
  5. 5. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1COYOTE GLC (Ground Level Closure) ® (Ground Level Closure) COYOTE® GLCConfiguration SelectionCOYOTE® GLC (Ground Level Closure)Base with Flat Cover (C1) C1• Ideal for slack storage of fiber optic cable with diameters up to .60" (15.24 mm) during initial construction• Base can store 100 ft of slack cable• Exterior Base Dimensions: 19.5" L x 19.5" W x 13" H (49 cm x 49 cm x 33 cm)• Protective cable routing channel on base exterior• Slots provided in base for securing cable• Split base to allow for installation/replacement without disrupting previously installed GLC components• Base retention stakes available to secure base in ground (see Accessories Selection)• Base height can be increased with the use of spacers (see Accessories Selection) Cat. No.: COYGLC-C1-000• Durable flat cover with integrated handlesCOYOTE GLC Dome Assembly with Platform (C2)• Used for splicing cable stored in a previously installed GLC C2 base with flat cover• Dome Assembly includes: (1) GLC dome, (1) collar, (1) fiber organizer (see Fiber Organzier Selection), & (1) platform• Dome Assembly provides a hermetical seal to keep out water, insects, and rodents• Dome Size: 9.5" W x 17" L (24 cm x 43 cm)• Collar system provides quick re-entry. No special tools required.• Integrated handles in collar allow for ease of handling when installing/removing dome assembly with platform from base• Collar latch allows for other security devices to be used• Platform allows dome assembly to be attached/detached from GLC base• Split platform to allow for installation/replacement without disrupting previously installed GLC components Cat. No.: COYGLC-F1-000 Cat. No.: COYGLC-F3-000 Cat. No.: COYGLC-F2-000 Cat. No.: COYGLC-F4-000Full COYOTE GLC Assembly (C3)• Used for splicing and storing cable during initial construction C3• Allows for fiber splicing at a fixed or remote location such as a splice trailer• Dome Assembly provides a hermetical seal to keep out water, insects, rodents, and other harmful elements• Various fiber organizers available to suit your splicing needs (see Fiber Organizer Selection)• Full GLC Assembly includes: (1) GLC Dome, (1) Collar, (1) fiber organizer (see Fiber Organzier Selection), (1) platform, and (1) base• All GLC components are modular and can easily be replaced• GLC base allows for storage of 50 ft (1524 cm) cable legs• Base retention stakes available to secure base in ground (see Accessory Selection)• Base height can be increased with the use of spacers (see Spacer Selection) Cat. No.: COYGLC-F1B-000 Cat. No.: COYGLC-F3B-000 Cat. No.: COYGLC-F2B-000 Cat. No.: COYGLC-F4B-000 1-5
  6. 6. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE GLC (Ground Level Closure) ® Fiber Organization Selection Buffer Tube and Unitube/Ribbon Organizer (F1) F1 • Ideal for traditional single fusion or mass fusion/ ribbon splicing • Patented segmented end plate allows for cables to be added without disrupting previously • Accommodates up to 96ct buffer tube cable installed cables or 144ct unitube/ribbon cable measuring .60" • Provided with 4 port end plate (15.2 mm) or smaller • 7 port end plate available upon request • Organizer includes: (1) 4-port end plate with • Adaptable to larger handholes; if greater below universal organizer, (1) gasket, (4) grommets*, ground storage or if larger cable diameters are (4) strength member brackets, (1) LITE-GRIP® required for your application Short Splice Tray for Single Fusion, and miscellaneous hardware *Standard Kit Grommets include (2)8003663 • See Splice Tray Section Chart on pg. 1-8 (1)8003664 (1)8003665 – Custom grommet • Features the latest, easy to use grommet combinations available upon request sealing system Buffer Tube Organizer for Increased Tray and Storage Capacity (F2) F2 • Ideal for traditional single fusion splicing where more expressed buffer tube storage and/or • Patented segmented end plate allows for cables to be added without disrupting previously splice tray capacity is needed installed cables • Accommodates up to 96ct buffer tube cable • Provided with 4 port end plate measuring .60" (15.2 mm) or smaller • 7 port end plate available upon request • Organizer includes: (1) 4-port end plate with • Adaptable to larger handholes; if greater below buffer tube organizer, (1) gasket, (4) grommets*, ground storage or if larger cable diameters are (4) strength member brackets, (1) LITE-GRIP required for your application Short Splice Tray for Single Fusion, and miscellaneous hardware *Standard Kit Grommets include (2)8003663 • See Splice Tray Section Chart on pg. 1-8 (1)8003664 (1)8003665 – Custom grommet • Features the latest, easy to use grommet combinations available upon request sealing system Cross-Connect Organizer for Buffer Tube and Unitube/Ribbon (F3) F3 • Ideal for traditional single fusion or mass fusion/ ribbon splicing where cross-connect capabilities • Features the latest, easy to use grommet sealing system are needed • Patented segmented end plate allows for • Accommodates up to 96ct buffer tube cable cables to be added without disrupting previously or 144ct unitube/ribbon cable measuring .60" installed cables (15.2 mm) or smaller • Provided with 4 port end plate • Organizer includes: (1) 4-port end plate with • 7 port end plate available upon request cross-connect organizer, (1) gasket, (4) • Adaptable to larger handholes; if greater below grommets*, (4) strength member brackets, (1) ground storage or if larger cable diameters are LITE-GRIP Short Splice Tray for Single Fusion, required for your application and miscellaneous hardware • Accommodates up to 4 SC, ST, LC, or FC *Standard Kit Grommets include (2)8003663 adapter plate modules (1)8003664 (1)8003665 – Custom grommet • Can support pre-connectorized splitters combinations available upon request • See Splice Tray Section Chart on pg. 1-8 OptiTap™ Organizer for Buffer Tube and Unitube/Ribbon (F4) F4 • Ideal for traditional single fusion or mass fusion/ ribbon splicing where OptiTap connections • Features the latest, easy to use grommet sealing system might be needed • Patented segmented end plate allows for cables • Accommodates up to 96ct buffer tube cable to be added without disrupting previously or 144ct unitube/ribbon cable measuring .60" installed cables (15.2 mm) or smaller • Provided with 4 port end plate • Organizer includes: (1) 4-port end plate with • Adaptable to larger handholes; if greater below OptiTap organizer and shroud, (1) gasket, (4) ground storage or if larger cable diameters are grommets*, (4) strength member brackets, (1) required for your application LITE-GRIP Short Splice Tray for Single Fusion, and miscellaneous hardware *Standard Kit Grommets include (2)8003663 • Accommodates up to 8 OptiTap adapters (1)8003664 (1)8003665 – Custom grommet • Can support pre-connectorized splitters combinations available upon request1-6 • See Splice Tray Section Chart on pg. 1-8
  7. 7. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1COYOTE GLC (Ground Level Closure) ® (Ground Level Closure) COYOTE® GLCSpacer SelectionStandard Spacer (S1)• Ideal for adjusting the GLC base height to ground level during S1 the back filling process of the installation of the base• Split design allows for installation/replacement without disrupting previously installed GLC components• Can be stacked to achieve desired base height• Each spacer increases the base height by 3" (7.6 cm)• Standard Spacer Kit includes: (2) standard spacer halves, (4) spacer studs, and (2) self tapping boltsGrounding Spacer (S2)• Ideal for isolated ground testing without having to re-enter the splice enclosure S2• Provides up to 7 isolated ground connections• Removable access plate on spacer exterior conceals grounding plate• Screw-on terminal head for #6 ground wire allows for quick connection to grounding plate• 2.5 ft (76.2 cm) flexible ground leads make connecting ground studs of splice enclosure to the grounding plate in spacer easy• Easily removable busbar permits quick ground isolation• Split design allows for installation/replacement without disrupting previously installed GLC components• Can be stacked on top of multiple standard spacers (S1) to achieve desired base height• Grounding spacer increases the base height by 3" (7.6 cm)• Grounding Spacer Kit includes: (1) standard spacer half, (1) grounding spacer half, (1) removable access plate, (1) grounding plate, (1) removable buss bar, (4) ground leads, (1) screw-on terminal head (4) spacer studs, and (2) self tapping boltsDual Grounding Spacer (S3)• Includes all the features and benefits as a standard grounding spacer (S2) S3• Provides up to 14 isolated ground connections• Removable access plates on spacer exterior conceal grounging plates• Screw on terminal head for #6 ground wire allows for quick connection to grounding plate• Dual Grounding Spacer Kit includes: (2) grounding spacer halves, (2) removable access plates, (2) ground- ing plates, (2) removable buss bars, (8) ground leads, (2) screw-on terminal heads (4) spacer studs, and (2) self tapping bolts 1-7
  8. 8. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE GLC (Ground Level Closure) ® Grommet Selection Accessory Selection Catalog Cable Range Catalog Description Grommets Description Accessory Number Inches (mm) Number .40 - .60 1-hole 8003691 80809005 Dome (10.7 - 15.2) grommet .42 - .60 2-hole 80809006 Dome Collar 8003663 (10.7 - 15.2) grommet .50 - .60 (12.7 - 15.2) 80809775 Dome Gasket 4-hole 8003990 .125 - .25 (3.2 - 6.4) grommet and Flat Drop Dome Collar 80809793 .30 - .43 4-hole Lock Assembly 8003664 (7.6 - 10.9) grommet 80809781 Cover Kit .125 - .25 6-hole 8003665 (3.2 - 6.4) grommet and Flat Drop 42" Base Retention Stake 80809788 .42 - .60 (10.7 - 15.2) with Anchor Plate 7-hole 8003676 .125 - .25 (3.2 - 6.4) grommet and Flat Drop Base Retention Stake 80809791 .125 - .25 Driver Cap 8-hole 8003677 (3.3 - 6.4) grommet LITE-GRIP Splice Blocks ® and Flat Drop LGSBS8-5 for Single Fusion (Yellow) - 5 splice blocks Flat Drop 4-hole 8003989 Cable Only grommet LITE-GRIP Splice Blocks for LGSBR3-5 Mass Fusion/Ribbon (Purple) - 5 splice blocks Flat Drop 12-hole 8003796 Cable Only grommet COYOTE ® 800013213 Cross-Connect Tray Express Fiber Storage Ring 80808613 Splice Tray Selection for LITE-GRIP Splice Tray GLC Fiber Parking Lot for Organizer 80808817 Cross-Connect Organizer – Reference Holds 6 Connectors Splice Code Catalog Count/ Splice CORNING OptiTap TM Number Type Description Tray F1 F2 F3 F4 80808152 Adapter 16 Single LITE-GRIP® LGSTS16 2 6 2 2 Fusion Short Tray 80807972 OptiTap Installation Tool 40 Single LITE-GRIP 80808945 2 6 2 2 Fusion Short Tray 80809766 Shield Connector 144 Mass LITE-GRIP LGSTR144 Fusion/ 2 6 2 2 Contact PLP Short Tray COYOTE PLC Splitter Ribbon for details 12 Single 80806033 Standard 3 8 3 3 Contact PLP Fusion Adapter Modules for details 12 Single 80807701 Low Profile 4 13 4 4 Fusion Contact PLP Pigtail Cable Assemblies for details Contact PLP Optical Drop Cable for details Assembly1-8
  9. 9. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1COYOTE Dome Closure ® Dome Closure COYOTE®Evolution of the Breed Continues… ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■The COYOTE Dome PLP Feature Focus RUS ©2009 Preformed Line ProductsClosure Family has ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■increased in size! Thenew 9.5" x 28" High LISTED Film available at www.preformed.comCapacity Dome Closureis available in three COYOTE Dome Closure Kitsdifferent configurations Catalogand can also be used Number Descriptionwith 9.5" Ar madillo 8006944 6.5" x 17" COYOTE Dome for Buffer Tube (Loose Tube)Stainless shells, further 8006945 6.5" x 17" COYOTE Dome for Ribbonexpanding the possibilities to address your network needs. 800012587 6.5" x 17" COYOTE Dome for Ribbon – Expanded StorageThe innovative, segmented end plate design in the new 9.5"diameter offers 7 cable entrance ports capable of accepting 8006988 6.5" x 17" COYOTE Dome Express (Loose Tube)cables with a maximum diameter of 1.25" (32 mm).The unique 6.5" x 17" COYOTE Dome Cross-Connect (Empty) 800012185 (Loose Tube)design allows each cable entrance to be accessed withoutdisruption to the surrounding cables. The new end plate 800012940 6.5" x 17" COYOTE Dome Flame Retardant (Ribbon)accepts the full line of multi-hole grommets designed to 800012941 6.5" x 17" COYOTE Dome Flame Retardant (Loose Tube)ensure the ultimate flexibility and high capacity to meet the 800012942 6.5" x 22" COYOTE Dome Flame Retardant (Loose Tube)demands of ever evolving communication networks. 800012943 6.5" x 22" COYOTE Dome Flame Retardant 8006877 6.5" x 22" COYOTE Dome for Buffer Tube (Loose Tube)The COYOTE Dome Closure was built from the ground up 800012606 6.5" x 22" COYOTE Dome for Copperusing the same craft-friendly fiber management technology 8006878 6.5" x 22" COYOTE Dome for Ribbonthat placed the COYOTE family among the most respected 800012441 6.5" x 22" COYOTE Dome for Ribbon – Expanded Storageand reliable in the industry. Re-entry is quick and requires no 8006946 6.5" x 22" COYOTE Dome Express (Loose Tube)special tools or re-entry kits. Both the 6.5" and 9.5" designs 6.5" x 22" COYOTE Dome Cross-Connect (Empty)are also convertible to closure shells for in-line applications or 800012184 (Loose Tube)to provide additional drop capacity. For connectivity solutions, 8006879 6.5" x 28" COYOTE Inline Dome for Buffer Tube (Loose Tube)the COYOTE Dome closures are also available in cross- 8006880 6.5" x 28" COYOTE Inline Dome for Ribbonconnect configurations. By combining these features with awide offering of splice trays and accessories, PLP has the 80061055 9.5" x 28" COYOTE Dome for Buffer Tube (Loose Tube)ability to address virtually any network design. 80061056 9.5" x 28" COYOTE Dome for Ribbon 80061057 9.5" x 28" COYOTE Dome for High Capacity (Max Tray Count)The COYOTE Dome Closure is tested in accordance with thedemanding requirements of the Telcordia GR-771-CORE Mounting Hardware And Accessory Kitsspecification for all aerial, buried and underground environ- Catalogments. Manufactured in accordance with ISO9001:2008 Number Descriptionprocedures to assure quality and backed by the experience 8003681 End Plate Kit – 6.5" Domeand field support that PLP has been noted for since 1947 . 8003839 End Plate Kit – 9.5" Dome 80807383 Hardware Bag for End PlateKey Features: 80808651 Extended Strength Member Bracket Kit• Available Sizes: 6.5" x 17" (17cm x 43cm), 80808878 Large Strength Member Adapter Kit 6.5" x 22" (17cm x 56cm), 9.5" x 28" (24cm x 71cm) 80807848 End Plate Gasket – 6.5" Dome• Patented segmented End Plate design provides indepen- 80808426 End Plate Gasket – 9.5" Dome dent access to every cable 80808456 End Plate Assembly Fixture – 6.5" or 9.5" Dome• 6.5" End Plate: 4 entry ports accepting max cable 8003702 Pole / Wall Mount Bracket – 6.5" Dome diameter of 1-1/4" (32mm) Aerial Hanger Bracket – Dome Mount 8003831• 9.5" End Plate: 7 entry ports accepting max cable (Strand Mount) – 6.5" Dome diameter of 1-1/4" (32mm) 8003707 Swing Arm for Hand Holes – 6.5" Dome• Fiber Organizers and End Plates come fully assembled 8003835 Universal Mounting Bracket Kit for Hand Holes – 6.5" Dome – minimizing the parts to handle 8003942 Pole / Wall Mount Bracket – 9.5" Dome• Simple to use multi hole and single hole grommets 8003941 Aerial Hanger Bracket – End Plate Mount – 9.5" Dome provide the ability to support high drop capacities 8003940 Aerial Hanger Bracket – Dome Mount – 9.5" Dome• No special tools or torque wrenches required for installation Maximum splice capacities are calculated by multiply-• Collar system allows for quick re-entry ing the maximum tray quantity per closure by the• Tested in accordance to Telcordia GR-771 CORE maximum splice capacity per splice tray. Achieving the maximum splice capacity for each closure may• Accepts a wide variety of PLP splice trays require adjustments to the volume of fiber stored• Patented End Plate Design within the fiber organizers. Contact a PLP represen- tative to discuss the details of achieving the maximum• RUS listed capacities for your installation. 1-9
  10. 10. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE In-Line RUNT Closure ® Evolution of the Breed Continues… COYOTE IN-LINE RUNT Closure Kits Catalog Number Description 8006951 Hermetically Sealed 8006952 Free Breathing 80061004 Express, Hermetically Sealed 80061049 Flame Retardant Hermetically Sealed COYOTE IN-LINE RUNT Accessories Catalog Number Description Splice Tray Kits 12 Count Low Profile Tray w/plastic splice block – 80807701 single fusion splices 12 Count Standard Tray w/Elastomeric splice block 80806033 – single fusion & mechanical fusion 16/40* Count Tray w/LITE-GRIP® splice blocks for LGSTS16 single fusion splice 144/180* Count Tray w/LITE-GRIP splice blocks for LGSTR144 ribbon splices 24 Count Low Profile Tray w/plastic splice blocks for 8003468 single fusion splices Versatile NOTE: Requires 8003757 Tray Conversion Kit 72 Count Ribbon Tray w/Elastomeric Splice Block for The COYOTE® In-Line RUNT Closure has the versatility and 80807114 Mass Fusion features that make it a perfect choice for distribution and Cover Kit fiber to the premise networks. The compact size allows the 8003719 COYOTE In-Line RUNT Cover Kit closure to be installed into pedestals and small hand holes, keeping your installation costs down. High drop capacity and Miscellaneous Accessory Kits the capability to be converted to a terminal closure will allow 8003733 End Plate Kit room for expansion long after the initial installation. 80807794 Hardware Bag 8003713 Express Brackets Rugged and Reliable 8003757 24 Count, Low Profile Splice Tray Conversion Kit The COYOTE In-Line RUNT Closure is tested in accordance 80807571 Spiral Tube Kit; 6 Length with the demanding requirements of Telcordia GR-771- Transport Tube Kit .135" ID; includes (6) 34" long 80805293 transport tubes CORE for all aerial, buried and underground environments. Manufactured in accordance with ISO 9001:2008 proce- Transport Tube Kit .25" ID; kit includes (3) 6 80808639 transport tubes dures and backed by the experience and field support that 80807989 Transport Tube 100 reel 0.170" ID PLP has been noted for since 1947. 80807991 Transport Tube 100 reel 0.25" ID 8003862 Fiber Organizer Kit for Ribbon Applications Key Features: Mounting Hardware Kits • Compact Size: 17.5" L x 10" W x 3.5" H 8003703 Pole/Wall Mount Bracket (44 cm x 25 cm x 9 cm) 8003797 Aerial Hanger Bracket • High drop capacity – See grommet chart 8003706 Swing Arm for Hand Holes • 4 entry ports, each accept 1-1/4" maximum cable diameter Pedestal Mounting Bracket for Emerson PRO12 8003714 • Hermetically sealed, free breathing, express and flame Pedestal PLP Fiber Optic Products retardant configurations available Universal Mounting Bracket Kit for Handhole 8003835 • Quick and easy assembly – no special tools required Applications • Simple-to-use grommet sealing system • Hinged cover reduces number of parts required upon Capacities re-entry Splice Tray Splices Trays per Splice Depth Description per tray Closure capacity • Internal organizer manages buffer tube or ribbon cable Low Profile Single Fusion 12 4 48 • Integrated air valve to test assembly seal Single Fusion or • Convertible to a COYOTE Terminal Closure with available Standard 12 2 24 Mechanical cover kits – request COYOTE Terminal brochure Ribbon Mass Fusion 72 2 144 • Full line of mounting hardware available *50% more storage for midsheath (express) applications, but 50% less splice capacity • Tested in accordance to Telcordia GR-771-CORE1-10 • RUS Listed
  11. 11. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1COYOTE Terminal Closure (Dual Chamber) ® Terminal Closure COYOTE®Evolution of the Breed Continues… The COYOTE Terminal Closure (Dual Chamber) is the choice for network designs requiring ultimate flexibility. The unique dual chamber design provides two distinct chambers that can be configured differently to support externally mounted OptiTap™ style hardened adaptors, internally mounted cross-connect bulkhead connections or a combi- nation of both. A window designed within the closure inte- rior allows fibers to be passed between chambers. High drop capacity from each of the eight cable ports and the ability to use standard or hardened adapter covers, provides infinite options to support your network design.Terminal Closure (Dual Chamber) with hardened adaptors Key Features: • Compact Size: 17.5" L x 10" W x 12" H (44 cm x 25 cm x 30 cm) • Accepts up to 24 hardened adapters • Eight Entry ports each accept 1-1/4" maximum cable diameter • High drop capacity – 8 through each port • Available in hermetically sealed, free breathing and express configurations • Quick and easy assembly – no special tools required • Simple to use grommet sealing system Terminal Closure (Dual Chamber) with hardened • Provided standard with SC/APC pigtails adaptors installed in both covers • Capability to field install or remove hardened adapter assemblies • Internal organizer manages buffer tube or ribbon cable • Integrated air valve provides field flash test point • Full line of hardware available for strand, pole and hand-hole installations • Tested in accordance to Telcordia GR-771 CORE • RUS Listed Splice Compartment – Terminal Closure (Dual Chamber) with Internal Bulkhead Drop Cable Chamber – Terminal Closure (Dual Chamber) with Internal Bulkhead 1-11*OptiTap™ is a trademark of Corning Cable Systems
  12. 12. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE Terminal Closure (Single Chamber) ® Evolution of the Breed Continues… The COYOTE Terminal Closure (Single Chamber) is the ideal choice for network designs requiring hardened adapter termination. Externally mounted OptiTap* style hardened adapters allow for future installation of up to 12 hardened drops without closure reentry. Compact size allows the closure to be installed into pedestals and small hand holes. Additional drop capacity through the four entry ports of the closure base, provide added flexibility for the closure to act as a distribution point for closures deeper in your network. Key Features: • Compact Size: 17.5" L x 10" W x 6" H (44 cm x 25 cm x 15 cm) Outside View – Terminal Closure (Single Chamber) • Accepts up to 12 hardened adapters • Four Entry ports each accept 1¼" maximum cable diameter • High drop capacity – 8 through each port • Available in hermetically sealed, free breathing and express configurations • Quick and easy assembly – no special tools required • Simple to use grommet sealing system • Provided standard with SC/APC pigtails • Port identification numbers to simplify assembly • Capability to field install or remove hardened adapter assemblies • Internal organizer manages buffer tube or ribbon cable • Integrated air valve provides field flash test point End Plate with Distribution Cable and 6-port Drop Cable Grommet • Full line of hardware available for strand, pedestal, pole and hand-hole installations • Tested in accordance to Telcordia GR-771 CORE • RUS Listed Inside View – Terminal Closure (Single Chamber) Drop wire with mating connectors for terminal are available in various lengths. Contact your local PLP representative or customer service for more details.1-12 *OptiTap™ is a trademark of Corning Cable Systems
  13. 13. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1COYOTE Terminal Closure ® Terminal Closure COYOTE®Evolution of the Breed Continues…Installation of Hardened COYOTE Terminal Connectors Closure – Hand Hole Application COYOTE Terminal Closure – Pedestal Application Coyote Terminal Closure Kits Catalog Chamber Adapter Plug Cover Type Number Description Type Qty Qty Terminal Standard 800012002 COYOTE Terminal Closure – 2 Port Single 2 4 1 0 8006993 COYOTE Terminal Closure – 3 Port Single 3 3 1 0 8006953 COYOTE Terminal Closure – 4 Port Single 4 2 1 0 8006954 COYOTE Terminal Closure – 6 Port Single 6 0 1 0 8006955 COYOTE Terminal Closure – 8 Port Single 8 1 1 0 800012003 COYOTE Terminal Closure – 9 Port Single 9 0 1 0 80061067 COYOTE Terminal Closure – 12 Port Single 12 0 1 0 80061029 COYOTE Terminal Dual Chamber – 6 Port Dual 6 0 1 1 8006991 COYOTE Terminal Dual Chamber – 8 Port Dual 8 1 1 1 800012140 COYOTE Terminal Dual Chamber – 9 Port Dual 9 0 1 1 80061030 COYOTE Terminal Dual Chamber – 10 Port Dual 10 2 2 0 800011830 COYOTE Terminal Dual Chamber – 12 Port Dual 12 0 2 0 800012605 COYOTE Terminal Dual Chamber – 24 Port Dual 24 0 2 0 800011839 COYOTE Terminal Dual Chamber – EMPTY Dual 0 0 0 2 8006956 COYOTE Terminal Closure w/6 SCAPC Internal Bulkhead Dual 0 0 0 2Terminal includes SC/AP Adapters and (1) Splice Tray 1-13
  14. 14. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE Terminal Closure ® COYOTE In-line RUNT & Terminal Closure Accessories Terminal Catalog In-Line Single Dual Number Description RUNT Chamber Chamber Splice Tray Kits 80807701 12 Count Low Profile Tray w/plastic splice block – single fusion splices X X X 80807531 12 Count Low Profile Tray (Blank) – no splice block X X X 80806033 12 Count Standard Tray w/elastomeric splice block – fusion & mechanical splices X X X 80806182 12 Count Standard Tray (Blank) – no splice X X X 80807114 72 Count Ribbon Tray w/elastomeric splice block for mass fusion X X X 80808160 Ribbon Tray (Blank) – no splice block X X X LGSTS16 16/40* Count LITE-GRIP® Tray (Short) for single fusion X X X LGSTR144 144/180* Count LITE-GRIP Tray (Short) for Ribbon X X X *Requires additional LITE-GRIP Splice Block kit for enhanced capacity Cover Kits 8003719 COYOTE In-Line RUNT Cover Kit* X X X 8003742 COYOTE Terminal Closure Cover Kit 2-Port with Hardened Adapters X X X 8003739 COYOTE Terminal Closure Cover Kit 3-Port with Hardened Adapters X X X 8003720 COYOTE Terminal Closure Cover Kit 4-Port with Hardened Adapters X X X 8003721 COYOTE Terminal Closure Cover Kit 6-Port with Hardened Adapters X X X 8003722 COYOTE Terminal Closure Cover Kit 8-Port with Hardened Adapters X X X 8003735 COYOTE Terminal Closure Cover Kit 9-Port with Hardened Adapters X X X 8003810 COYOTE Terminal Closure Cover Kit 12-Port with Hardened Adapters X X X Adapter Accessory Kits 8003715* Hardened Adapter Kit – Field Installable – Includes 80807972 X X 8003724* Port Plug Kit-Field Installable – Includes 80807972 X X 80807972 Hardened Adapter Installation Tool X X 80808157 Fiber Optic Pigtail Kit (2-Pigtails) X X 80807939 Fiber Optic Pigtail Kit (3-Pigtails) X X 80807806 Fiber Optic Pigtail Kit (4-Pigtails) X X 80807807 Fiber Optic Pigtail Kit (6-Pigtails) X X 80807808 Fiber Optic Pigtail Kit (8-Pigtails) X X 80808158 Fiber Optic Pigtail Kit (9-Pigtails) X X 80808700 Fiber Optic Pigtail Kit (12-pigtails) X X Miscellaneous Accessory Kits 8003733 End Plate Kit X X X 80807794 Hardware bag X X X 80807972 Adapter Installation Tool X X Transport Tube Kit .135" ID: includes six 34" long transPort with Hardened 80805293 X X X Adapters tubes, used to bring fiber from transition compartment to splice tray Transport Tube Kit .25" ID: includes six 34" long transPort with Hardened Adapters 80806439 X X X tubes, used to bring fiber from transition compartment to splice tray 80807989 Transport Tube 100 coil 0.135" ID X X X 80807991 Transport Tube 100 coil 0.25" ID X X X Mounting Hardware Kits 8003713 Express Bracket Kit X X X Pole/Wall mount bracket kit for In-Line RUNT and Terminal 8003703 X X X (Standard and Dual Chamber) 8003704 Aerial Hanging Bracket Kit for COYOTE In-Line RUNT and Terminal Closure X X 8003705 Aerial Hanging Bracket Kit for COYOTE Terminal Dual Chamber X 8003706 Swing Arm Bracket for COYOTE In-Line RUNT and Terminal Closures X X X Pedestal Mounting Bracket for COYOTE In-Line RUNT and Terminal Closure 8003714 X X (Emerson PRO12 Pedestal) *Hardened Adapter Kit or Plug kit can only be used with terminal closure covers1-14
  15. 15. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1COYOTE Aerial Drop Closure ® Aerial Drop Closure COYOTE®A Simple Solution, a Breed Apart The COYOTE® Aerial Drop Closure Kit ComponentsKey Features: COYOTE Aerial Fiber Drop Closure Kits• Compact Size – 9” W x 16.5” L x 2.5” D Catalog• Feature rich and value priced solution Number Description• Easy to install – no special tools required COYOTE Aerial Fiber Drop Closure Kit COYDAC03 Includes: Cover, Base and components• Easy-to-use grommet sealing system shown above• Includes splicing platform COYOTE Splice Platform Kits• Accepts 2 splice platforms for a splice capacity Splice Plate Kit – 12 Count Splice Block – of 24 fibers 8003792 Single Fusion• Capable of higher splice capacities with alternative Splice Plate Kit – 12 Count Splice Block – 8003751 splice holders. Consult a PLP representative for details. Unprotected Single Fusion• Includes universal mounting bracket with features to Splice Plate Kit – 24 Count LITE-GRIP Splice 8003793 permit pole mounting with straps, strand mounting with Block – Single Fusion strand clamps or suspension from “J” hooks secured Splice Plate Kit – 72 Count LITE-GRIP Splice 8003794 to a pole Block – Ribbon COYOTE Aerial Fiber Drop Accessory KitsPLP Reliability 80808256 12 Entry Grommet Kit with Bobbin End Plate Kit – includes (2) End Plates,The COYOTE Fiber Optic Aerial Drop Closure is manufac- 8003753 Bolts and Tethertured in accordance with ISO 9001-2008 procedures to Strength Member Bracket Kit for Singleassure quality and is backed by the experience and field 8003777 Cable Entrysupport that Preformed Line Products has been noted for 80808257 Fiber Organizer Clip Kitin fiber optic closures for over 20 years. 8003775 Hanger Bracket Kit 1-15
  16. 16. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE LCC (Low Count Closure) ® Maximum Flexibility in a Small Package RUS ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ PLP Feature Focus ©2009 Preformed Line Products LISTED ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ Film available at www.preformed.com Grommets 8003796 12 Hole 8003691 1 Hole 8003692 1 Hole 8003693 1 Hole 8003694 1 Hole 8003663 2 Hole 8003990 4 Hole 8003664 4 Hole 8003665 6 Hole 8003677 8 Hole 8003989 4 Hole 8003676 7 Hole Splice Type* L Bracket Bobbin COYOTE LCC and COYOTE LCC Flame Retardant Kits for Fiber Catalog Number COYLCC-F001 S 2 1 1 COYLCC-F002 S 1 2 1 1 Every splice location, regardless of the FTTX Architecture, COYLCC-F003 R 2 2 must be protected from the elements to provide the maximum COYLCC-F004 S 2 2 reliability your customers expect. The new COYOTE LCC COYLCC-F005 S 2 2 (Low Count Closure) is the latest edition to the COYOTE COYLCC-F006 S 2 2 Fiber Optics product line for your Fiber to the Home, Node, COYLCC-F007 S 2 1 1 or Curb deployment. COYLCC-F008 S 2 1 1 The Closure’s compact size, use of the versatile grommet COYLCC-F009 S 2 2 system and internal LITE-GRIP® Splice Platform are COYLCC-F010 1 1 designed to make this rugged closure the economical choice COYOTE LCC Kits for Copper for new installations and critical repair situations. Kits have COYLCC-C001 C 2 also been created to support copper applications. The COYLCC-C002 C 2 COYOTE LCC for Copper will support up to 25 pair in a butt COYLCC-C003 C 2 application and 50 pair in an In-Line configuration. COYLCC-C004 C 1 1 The COYOTE LCC represents the maximum versatility, COYLCC-C005 C 2 reliability and technical support you’ve come to expect NOTES: from PLP. All COYOTE LCC Kits for Fiber include: (2) grommets, (1) splice platform, (3) splice blocks, (2) cable restraint brackets, lubricant and measure tape Key Features: All COYOTE LCC Kits for Copper include: (2) grommets, (2) MINI-MORAY Shield Connectors, (1) bonding bridge, lubricant and measure tape • Compact Size – 17" L x 7" W x 2.5" D For the COYOTE LCC Flame Retardant catalog numbers, insert “FR” into (43cm x 18cm x 7cm) the catalog number code, Ex.: COYLCCFR-F001. The grommets provided will be the same as • Max Splice Capacity – Single Fusion – 24 splices shown in the chart. • Max Splice Capacity – Ribbon/Mass Fusion – 72 *Splice Type: S = Single Fusion R = Ribbon C = Copper • Capable of Inline or Butt applications • Designed for aerial, below grade or direct buried applications COYOTE LCC Accessories • Same craft friendly grommet system as the COYOTE Catalog Dome Closures Number Description 80808633 Strength Member Bobbin Kit • Flat shape allows for mounting in small areas 8003843 Strength Member L Bracket Kit • Utilizes LITE-GRIP Splice Block System, which permits Splice Platform Kit for Single Fusion – 8003793 single fusion, mass fusion, mechanical, PLC splitters includes 3 splice blocks or a combination of all within one closure 8003794 Splice Platform Kit for Ribbon – includes 2 splice blocks • Quick, easy installation is ideal for drop repair applications LITE-GRIP Splice Block for Single Fusion – accepts LGSBS8-5 • Fire Retardant versions available 8 splice protectors per block – 5 pcs per kit LITE-GRIP Splice Block for Ribbon – accepts 3 • Tested in accordance to TR-NWT-000251 by an LGSBR3-5 mass fusion protectors per block – 5 pcs per kit1-16 independent outside lab • RUS listed
  17. 17. PREVIOUS SECTION CONTENTS SEARCH NEXT COYOTE® Closure Series: Section 1COYOTE LCC (Low Count Closure) ® (Low Count Closure) COYOTE® LCC COYOTE LCC Installation Options Part Number Application Type and Description 8003832 Aerial Aerial Mounting Bracket (Strand Mount) 8003830 Pole/Wall Mount Pole/Wall Mount Bracket Kit 8003835 Below Grade Large Vault/Hand Hole Universal Mounting Bracket Kit for Hand Hole Applications COYOTE LCC: COYLCC-XXXX Below Grade COYOTE GLC Base Small Hand Hole COYGLC-C1-000 Butt Applications Only For small drop and flat drop applications only Direct Buried No Mounting Brackets Needed COYOTE LCC Custom for Coax Contact PLP for Details COYOTE LCC Custom Cross-Connect Contact PLP for Details COYOTE LCC Custom with Terminal Block Contact PLP for Details 1-17

×