Your SlideShare is downloading. ×
ENGLISH                                                      LCD TV   PLASMA TV                                           ...
ACCESSORIESEnsure that the following accessories are included with your TV. If an accessory is missing, please contact the...
CONTENTS           ACCESSORIES                  .............................................   1   Fine Tuning (In Analog...
SOUND & LANGUAGE CONTROL                                                              DIGITAL TELETEXTAuto Volume Leveler ...
PREPARATION                      FRONT PANEL CONTROLS                      A   This is a simplified representation of the ...
LCD TV Models                                                                                                      PREPARA...
PREPARATION                               BACK PANEL INFORMATION                                                          ...
LCD TV Models                                                                                                             ...
PREPARATION              STAND INSTALLATION (Only 26, 32, 37 inch LCD TV Models)              1   Carefully place the prod...
ATTACHING THE TV TO A WALLA   Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.A  ...
PREPARATION              BACK COVER FOR WIRE ARRANGEMENT              Plasma TV modelsPREPARATION              1   Hold th...
LCD TV models                                                                                                     PREPARAT...
PREPARATION              ■   The set can be installed in various ways such as on a wall, or on a desktop etc.             ...
■   To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.ANTENN...
EXTERNAL EQUIPMENT SETUP                           ■   To prevent the equipment damage, never plug in any power cords unti...
ANTENNA                                                                                                                   ...
EXTERNAL EQUIPMENT SETUP                           DVD SETUP                           When connecting with a component ca...
ANTENNA                                    IN                                                                VIDEO      AU...
AV 1        AV 2                                                                                                          ...
VCR SETUP    ■   To avoid picture noise (interference), leave an adequate distance between the VCR and TV.    ■   Typicall...
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Document
Upcoming SlideShare
Loading in...5
×

Document

360

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
360
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
5
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "Document"

  1. 1. ENGLISH LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS PLASMA TV MODELS 2 6 L C 4* 2 6 L C 5* 4 2 P C 5* 3 2 L C 4* 3 2 L C 5* 5 0 P C 5* 3 7 L C 4* 3 7 L C 5* 5 0 P B 6 5* 4 2 L C 4* 4 2 L C 5* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.Trade Mark of the DVB Digital VideoBroadcasting Project (1991 to 1996)I D N u m b e r ( s ) : 4550: 26LC45 4549: 26LC46 4548: 32LC45 4547: 32LC46 4546: 37LC45 4545: 37LC46 4544: 42LC45 4543: 42LC46 4542: 32LC55 4541: 32LC56 4540: 26LC55 4539: 37LC55 4538: 42LC55 4559: 42PC55 4555: 50PC55 4554: 42PC56 4553: 50PC56 4552: 50PB65
  2. 2. ACCESSORIESEnsure that the following accessories are included with your TV. If an accessory is missing, please contact thedealer where you purchased the product. Owners ACCESSORIES Manual Owner’s manual Owner’s Manual Power Cord Polishing Cloth (except 26/32LC4*) TV/RA INPU DIO IN PU D/A T PO Polish the screen with the cloth. W T ER M BR O SIM D PLINK IG TV E Slightly wipe stained spot on the exterior HT TE DV XT D RA VC TIO R EX IT BA CK I/II only with the cleansing cloths for the prod- M EN U INFO i uct exterior if there is stain or fingerprint on surface of the exterior. GU OK IDE VO L FA V 1 Do not wipe roughly when removing stain. MU PR TE 4 2 7 5 3 UPDA LIST 0 8 9 6 Please be cautious of that excessive power may cause scratch or discoloration. TE SL EE Q.VIE P INDE W SUBT X ITLE HO LD TIM E ? RE VE AL Batteries Remote Control Plasma TV models 5 0 P B 6 5* o n l y One desk-type stand fixture 3-bolts 2-Wall brackets 2-eye-bolts protection cover Refer to p. 12 Refer to p. 12 LCD TV models 26”, 32”, 37” only 2- TV Brackets 2-bolts Twister Holder Cable Management 4-bolts for stand assembly 2- Wall Brackets Arrange the wires Refer to p. 8 with the twister holder. 1
  3. 3. CONTENTS ACCESSORIES ............................................. 1 Fine Tuning (In Analogue Mode) . . . . . . . . . . . . . . 45 Assigning a Station Name (In Analogue Mode) . . . . . . 45 Programme Edit (In Analogue Mode) . . . . . . . . . . . . . 46 Calling the Programme Table . . . . . . . . . . . . . . . . 48 PREPARATION Input Source Selection . . . . . . . . . . . . . . . . . . . . . 49CONTENTS Index (only 50PB65*) . . . . . . . . . . . . . . . . . . . . . . .49 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4 SIMPLINK Function . . . . . . . . . . . . . . . . . . . . . . . . 50 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 6 Stand installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Attaching the TV to a wall . . . . . . . . . . . . . . . . . . . . . 9 PICTURE CONTROL Back Cover for Wire Arrangement . . . . . . . . . . . . . 10 Desktop Pedestal Installation . . . . . . . . . . . . . . . . . 12 Wall Mount: Horizontal installation . . . . . . . . . . . . 12 EPG (Electronic programme guide) (In Digital Mode) Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . 13 - Switch on/off EPG . . . . . . . . . . . . . . . . . . . . . 52 - Select programme . . . . . . . . . . . . . . . . . . . . . 52 - Button function in NOW/NEXT guide mode . . . . . 53 EXTERNAL EQUIPMENT SETUP - Button function in 8 days guide mode . . . . . . . . . 53 - Button function in date change mode . . . . . . . . . . 53 HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . 14 - Button function in extended description box . . . . . 54 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - Button function in record/remind setting mode . . . 54 Insertion of CI module . . . . . . . . . . . . . . . . . . . . . . 1 8 - Button function in timer list mode . . . . . . . . . . . . 54 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Picture Size (Aspect Ratio) Control . . . . . . . . . . . . 55 Digital Audio Out Setup . . . . . . . . . . . . . . . . . . . . . 21 Preset Picture Settings Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . 22 - Picture Mode-Preset . . . . . . . . . . . . . . . . . . . . 57 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - Auto Colour Tone Control (Warm/Medium/Cool) . . . . .58 - Screen Setup for PC Mode . . . . . . . . . . . . . . . 26 Manual Picture Adjustment - Picture Mode-User option . . . . . . . . . . . . . . . . 59 - Colour Tone - User option . . . . . . . . . . . . . . . .60 WATCHING TV / PROGRAMME CONTROL XD - Picture Improvement Technology . . . . . . . . . . . . . 61 Remote Control Key Functions . . . . . . . . . . . . . . . 30 XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Advanced - Cinema . . . . . . . . . . . . . . . . . . . . . . . . . 63 Programme Selection . . . . . . . . . . . . . . . . . . . . . . . 33 Advanced - Black(Darkness) Level . . . . . . . . . . . . . 64 Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . 33 Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 On-Screen Menus Selection and Adjustment . . . . 34 Image Sticking Minimization(ISM) Method . . . . . . . . . . 66 Auto Programme Tuning (In Digital Mode) . . . . . . 35 Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . 67 Manual Programme Tuning (In Digital Mode) . . . . 36 Programme Edit (In Digital Mode) . . . . . . . . . . . . . 37 5V antenna Power (In Digital Mode only) . . . . . . . 39 Software Update (In Digital Mode only) . . . . . . . . 40 Diagnostics (In Digital Mode only) . . . . . . . . . . . . 41 CI Information (In Digital Mode only) . . . . . . . . . . 42 Auto Programme Tuning (In Analogue Mode) . . . . . 43 Manual Programme Tuning (In Analogue Mode) . . . . . . . 44 2
  4. 4. SOUND & LANGUAGE CONTROL DIGITAL TELETEXTAuto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 68 Teletext within Digital Service . . . . . . . . . . . . . . . 86Preset Sound Settings - Sound Mode . . . . . . . . . . 69 Teletext in Digital Service . . . . . . . . . . . . . . . . . . 86 CONTENTSSound Setting Adjustment - User Mode . . . . . . . . . . 70Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . . . 72 APPENDIXSelecting digital audio out . . . . . . . . . . . . . . . . . . . 73I/II Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 - Stereo/Dual Reception (In Analogue Mode Only) . . . . 74 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 - NICAM Reception (In Analogue Mode Only) . . . . . . . 75 Product Specifications . . . . . . . . . . . . . . . . . . . . . . 90 - Speaker Sound Output Selection . . . . . . . . . . 75 Programming the Remote Control . . . . . . . . . . . . . 92On-Screen Menu Language/Country Selection . . . . . . . . 76 Programming Code . . . . . . . . . . . . . . . . . . . . . . . . . 92Language selection (In Digital Mode only) . . . . . . 77 IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 External Control Device Setup . . . . . . . . . . . . . . . 96 TIME SETTINGClock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Auto On/ Off Timer Setting . . . . . . . . . . . . . . . . . . 79Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . 80Time zone Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . 81 PARENTAL CONTROL / RATINGSSet Password & Lock System . . . . . . . . . . . . . . . . . 82Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 TELETEXTSwitch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Special Teletext Functions . . . . . . . . . . . . . . . . . . . . 85 3
  5. 5. PREPARATION FRONT PANEL CONTROLS A This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. A If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. Plasma TV Models: 42/50PC5*PREPARATION Remote Control Sensor INPUT MENU OK VOL PR Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on. INPUT MENU OK VOL PR INPUT Button INPUT MENU OK VOL PR OK Button PROGRAMME Buttons POWER Button MENU Button VOLUME Buttons Plasma TV Models: 50PB65* Remote Control Sensor INPUT MENU OK VOL PR OK Button Power/Standby Indicator • illuminates red in standby mode. MENU Button PROGRAMME Buttons INPUT Button POWER Button VOLUME Buttons 4
  6. 6. LCD TV Models PREPARATION PR PROGRAMME Buttons VOL VOLUME Buttons OK Button OK MENU MENU Button INPUT INPUT Button R /I POWER Button Power/Standby Indicator • illuminates red in standby mode. Remote Control Sensor • illuminates green when the set is switched on. 5
  7. 7. PREPARATION BACK PANEL INFORMATION AV IN 3 A This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. VIDEO R AUDIO L/MONO S-VIDEO Plasma TV Models AV IN 3 AV IN 3 VIDEO L/MONO AUDIO R S-VIDEO VIDEO L/MONO AUDIO R S-VIDEO S-Video Input PREPARATION AV IN 3 Connect S-Video out from an S-VIDEO device. VIDEO R AUDIO L/MONO S-VIDEO Audio/Video Input Connect audio/video output from an external device to these jacks. 1 2 3CMCIA D SLOT EJECT PCMCIA CARD SLOT EJECT HDMI/DVIAV 1 AV 1AV 2 IN 2 IN HDMI AV RGB IN RGB IN 1 AV 1 2 AV 2 RGB AUDIO AV 1 AV 2 (PC) ANTENNA (RGB/DVI) IN HDMI IN RGB IN AC IN 1 2 ANTENNA VIDEO AUDIO DIGITAL AUDIO IN ANTENNA IN HDMI IN ANTENNA OUT VIDEO AUDIO COMPONENT IN IN 1 2 VIDEO AUDIO VARIABLE AUDIO OUT COMPONENT IN OPTICAL COMPONENT IN RS-232C IN VIDEO AUDIO RS-232C IN VARIABLE AUDIO OUT(CONTROL & SERVICE) 4 5 6 7 8 9 1 PCMCIA (Personal Computer Memory Card 6 RS-232C IN (CONTROL & SERVICE) PORT International Association) Card Slot Connect to the RS-232C port on a PC. (This feature is not available in all countries.) 7 Component Input 2 HDMI Input Connect a component video/audio device to Connect a HDMI signal to HDMI IN. these jacks. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. 8 Euro Scart Socket (AV1/AV2) 3 RGB/DVI Audio Input Connect scart socket input or output from an Connect the monitor output from a PC to the external device to these jacks. appropriate input port. 9 Power Cord Socket 4 Antenna Input This TV operates on an AC power. The voltage is Connect over-the-air signals to this jack. indicated on the Specifications page. Never attempt to operate the TV on DC power. 5 DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equip- ment. Note: In standby mode, these ports do not work. 6
  8. 8. LCD TV Models S-VIDEO S-Video Input S-VIDEO Connect S-Video out from an S- PREPARATION VIDEO L/MONO AUDIO R VIDEO device. VIDEO L/MONO AUDIO R S-VIDEO Audio/Video Input S-VIDEO Connect audio/video output from VIDEO L/MONO AUDIO R VIDEO L/MONO AUDIO R an external device to these jacks. AV IN 3 AV 3 AV IN 3 AV IN 3 1 2 3 PCMCIA AV 1 EJECT AV 2 AV 1 AV 2 HDMI IN RGB IN HDMI IN RGB IN AC-IN CARD SLOT RGB ANTENNA IN 1 2 1 HDMI/DVI ANTENNA 2 ININ1 HDMI IN 2 IN AV 1 AV 2 RGB(PC) AUDIO IN (RGB/DVI) AV 1 AV 2 RGB IN 2 ANTENNA COMPONENT IN DIGITAL AUDIO OUT IN VIDEO AUDIO VARIABLE VIDEO AUDIO VARIABLE ANTENNA COMPONENT IN AUDIO OUT COMPONENT IN AUDIO OUT IN VIDEO AUDIO OPTICAL RS-232C IN (CONTROL & SERVICE) AUDIO VARIABLEIN 9 AUDIO OUT 4 5 6 7 8 1 PCMCIA (Personal Computer Memory Card 6 RS-232C IN (CONTROL & SERVICE) PORT International Association) Card Slot Connect to the RS-232C port on a PC. (This feature is not available in all countries.) 7 Component Input 2 HDMI Input Connect a component video/audio device to Connect a HDMI signal to HDMI IN. these jacks. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. 8 Euro Scart Socket (AV1/AV2) 3 RGB/DVI Audio Input Connect scart socket input or output from an Connect the monitor output from a PC to the external device to these jacks. appropriate input port. 9 Power Cord Socket 4 Antenna Input This TV operates on an AC power. The voltage is Connect over-the-air signals to this jack. indicated on the Specifications page. Never attempt to operate the TV on DC power. 5 DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equip- ment. Note: In standby mode, these ports do not work. 7
  9. 9. PREPARATION STAND INSTALLATION (Only 26, 32, 37 inch LCD TV Models) 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage.PREPARATION 2 Assemble the product stand with the product as shown. Install the 4 bolts securely, in the back of the 3 product in the holes provided. 8
  10. 10. ATTACHING THE TV TO A WALLA Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.A The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please PREPARATION make sure that children don’t climb on or hang from the product. Plasma TV models LCD TV models 1 1 2 21 Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.2 Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall. 33 Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. ! NOTE G When moving the product to another place undo the ropes first. G Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. G To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product. 9
  11. 11. PREPARATION BACK COVER FOR WIRE ARRANGEMENT Plasma TV modelsPREPARATION 1 Hold the C A B L E M A N A G E M E N T with hands and push it as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. 3 Reinstall the C A B L E M A N A G E M E N T as shown.10
  12. 12. LCD TV models PREPARATION1 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section.2 Install the C A B L E M A N A G E M E N T as shown. CABLE MANAGEMENT3 Bundle the cables using the supplied twister holder.How to remove the cable managementHold the C A B L E M A N A G E M E N T with bothhands and pull it upward. ! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken. 11
  13. 13. PREPARATION ■ The set can be installed in various ways such as on a wall, or on a desktop etc. ■ The set is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent Power Supply possible electric shock. If grounding methods are not pos- sible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to Short-circuitPREPARATION telephone wires, lightening rods, or gas pipes. Breaker Desktop Pedestal Installation For proper ventilation, allow a clearance of 4" on each side and from the wall. 4 inches 4 inches 4 inches 4 inches R Wall Mount: Horizontal installation For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 4 inches 4 inches 4 inches 4 inches 4 inches If you want to install the desk-type stand Bolts fixture protection cover (50PB65* only) To prevent the foreign materials from entering the desk-type stand fixture, fix the desk-type stand fixture protection cover by using the supplied bolts as shown at the figure. Desk-type stand fixture protection cover12
  14. 14. ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.ANTENNA CONNECTION■ For optimum picture quality, adjust antenna direction.■ An antenna cable and converter are not supplied. AV IN 3 VIDEO R AUDIO L/MONO S-VIDEO S-VIDEO PREPARATION PCMCIA EJECT VIDEO L/MONO AUDIO R CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV IN 3 AV 1 AV 2 Multi-family Dwellings/Apartments HDMI IN RGB IN ANTENNA Wall AV 1 AV 2 1 2 IN RGB IN ANTENNA (Connect to wall antenna socket) ANTENNA IN HDMI IN Antenna 1 2 IN COMPONENT IN VIDEO AUDIO VARIABLE VIDEO Socket VIDEO AUDIO VARIABLE AUDIO OUT COMPONENT IN AUDIO OUT RS-232C IN RF Coaxial Wire (75 ohm) Outdoor Antenna (VHF, UHF) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) - Be careful not to bend the bronze wire when connecting to an antenna port. PCMCIA EJECT - 5V antennaSLOT works In Digital CARD power HDMI/DVI IN 1 HDMI IN 2 mode only. (Refer to p. 39) UHF ANTENNA IN Antenna Signal VIDEO Amplifier VHF RS-232C IN ■ In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown to the right. ■ If signal needs to be split for two TVs,use an antenna signal splitter for connection. 13
  15. 15. EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP ■ This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.However,if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below. When connecting with a component cable Connect the video outputs (Y, PB, PR) of the digital set 1 top box to the C O M P O N E N T I N V I D E O jacks on theEXTERNAL EQUIPMENT SETUP set. 2 Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the set. 1 2 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 4 Select COMPONENT input source with using the I N P U T button on the remote control. EJECT PCMCIA CARD SLOT HDMI/DVI IN 1 HDMI IN 2 RGB IN AV 1 AV RGB(PC) AUDIO IN (RGB/DVI) COMPONENT IN DIGITAL AUDIO OUT ANTENNA IN VIDEO AUDIO AL RS-232C IN Signal Component HDMI1/2 480i/576i Yes No 480p/576p Yes Yes 720p/1080i Yes Yes PCMCIA EJECT 1080p CARD No SLOT Yes HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 ANTENNA IN VIDEO AUDIO RS-232C IN14
  16. 16. ANTENNA IN VIDEO AUDIO RS-232C IN When connecting with a HDMI cable PCMCIA EJECT CARD SLOT RGB IN HDMI/DVI IN 1 HDMI IN 2 AV 1 AV RGB(PC) AUD (RG Connect the digital set-top box to H D M I / D V I I N 1or 1 COMPONENT I DIGITAL AUDIO OUT H D M I I N 2 jack on the set. ANTENNA IN VIDEO AUDIO AUDI OPTICAL 2 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) RS-232C IN (CONTROL & SERVICE) 1 3 Select HDMI1 or HDMI2 input source with using the EXTERNAL EQUIPMENT SETUP I N P U T button on the remote control. When connecting with a HDMI to DVI cableECT PCMCIA EJECT ECT CARD SLOT RGB IN HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 RGB(PC) AUDIO IN (RGB/DVI) 1 Connect the digital set-top box to H D M I / D V I I N 1 jack on the set. COMPONENT IN DIGITAL AUDIO OUTTENNA ANTENNA ENNA IN IN 2 Connect theAUDIO VIDEO audio output of the digital set-top box to OPTICAL VIDEO AUDIO the A U D I O I N ( R G B / D V I ) jack on the set. RS-232C IN 1 RS-232C IN 2 (CONTROL & SERVICE) 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 4 Select HDMI1 input source with using the I N P U TI IN 1 HDMI IN 2 button on the remote 2control. AV 1 AV VIDEO AUDIO RS-232C IN 15
  17. 17. EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable Connect the video outputs (Y, PB, PR) of the DVD to the 1 C O M P O N E N T I N V I D E O jacks on the set. 2 Connect the audio outputs of the DVD to theEXTERNAL EQUIPMENT SETUP C O M P O N E N T I N A U D I O jacks on the set. 3 Turn on the DVD player, insert a DVD. 1 2 4 Select COMPONENT input source with using the I N P U T button on the remote control. 5 Refer to the DVD players manual for operating PCMCIA EJECT CARD SLOT RGB IN instructions. HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 RGB(PC) AUDIO IN (RGB/DVI) COMPONENT IN DIGITAL AUDIO OUT ANTENNA IN VIDEO AUDIO RS-232C IN Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Y PB PR PCMCIA EJECT CARD SLOT Y PB PR HDMI/DVI IN 1 HDMI IN 2 Video output ports Y B-Y R-Y on DVD player Y Cb Cr Y Pb Pr ANTENNA IN VIDEO AUDIO RS-232C IN16
  18. 18. ANTENNA IN VIDEO AUDIO RS-232C IN When connecting with a Euro Scart PCMCIA EJECT CARD SLOT RGB IN Connect the Euro scart socket of the DVD to the2A V 1 HDMI/DVI IN 1 HDMI IN AV 1 AV 2 C) AUDIO IN 1 Euro scart socket on the set. (RGB/DVI) PONENT IN 2 Turn on the DVD player,ANTENNA a DVD. insert IN VIDEO AUDIO 3 Select AV1 input source with using the I N P U T button on the remote control. EXTERNAL EQUIPMENT SETUP RS-232C IN If connected to AV2 Euro scart socket, select AV2 input source. 1 4 Refer to the DVD players manual for operating instructions. AUDIO/ (R) AUDIO (L) VIDEO ! NOTE G If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable. When connecting with an S-Video cable VIDEO S-VIDEO L R ANT IN Connect the S-VIDEO output of the DVD to the S - 1 V I D E O input on the set. OUTPUT SWITCH ANT OUT 1 2 S-VIDEO 2 Connect the audio outputs of the DVD to the A U D I O input jacks on the set. AV 1 AV 2 VIDEO L/MONO AUDIO R 3 Turn on the DVD player, insert a DVD. 4 Select AV3 input source with using the I N P U T button AUDIO on the remote control. AV IN 3 5 Refer to the DVD players manual for operating instruc- tions.DMI IN 2 AV 1 AV 2 17 PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 HDMI IN 2 AV 1 AV
  19. 19. AV 1 AV 2 VIDEO L/MONO AUDIO R EXTERNAL EQUIPMENT SETUP AUDIO AV IN 3 When connecting HDMI cable 1 Connect the HDMI output of the DVD to the H D M I / D V I HDMI IN 2 I N 1 or H1 M IAVN 2 jack on the set. AV D I 2 PCMCIA EJECT CARD SLOT R HDMI/DVI IN 1 HDMI IN 2 2 Select HDMI1or HDMI2 input source with using the RGB(P I N P U T button on the remote control. COMP DIGITAL AUDIO OUT VIDEO AUDIO EXTERNAL EQUIPMENT SETUP 3 Refer to the DVD players manual for operating ANTENNA IN instructions. VIDEO AUDIO OPTICAL2C IN RS-232C IN 1 (CONTROL & SERVICE) ! NOTE G TV can receive the video and audio signal simultaneously with using a HDMI cable. G If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. INSERTION OF CI MODULE - To view the scrambled (pay) services in digital TV mode. - This feature is not available in all countries. PCMCIA EJECT CARD SLOT HDMI IN 1 HDMI IN 2 1 Insert the CI Module to P C M C I A (Personal Computer 1 Memory Card International Association) C A R D S L O T ANTENNA of TV as shown. IN TV OPTICA VIDEO For further information, see p.42. RS-232C RS-232 IN (CONTROL & 18
  20. 20. VCR SETUP ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Typically a frozenPCMCIA still pictureEJECT a VCR. If the 4:3 picture format is used; the fixed images on the sides of from the screen may CARD SLOT remain visible on the screen. HDMI/DVI IN 1 HDMI IN 2 AV 1 AV 2 When connecting with an antenna DIGITAL AUDIO OU ANTENNA IN ANT OUT S-VIDEO VIDEO L R EXTERNAL EQUIPMENT SETUP VIDEO AUDIO OPTICAL 1 RS-232C IN OUTPUT (CONTROL & SERVICE) ANT IN SWITCH Wall Jack 2 Antenna Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the set. 1 AV 1 AV 2 2 Connect the antenna cable to the A N T I N socket of the VCR.O AUDIO 3 Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for viewing. 19

×