Your SlideShare is downloading. ×
Non Metallic Seal less Mag-drive-Pump
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×

Introducing the official SlideShare app

Stunning, full-screen experience for iPhone and Android

Text the download link to your phone

Standard text messaging rates apply

Non Metallic Seal less Mag-drive-Pump

59
views

Published on

Know more about a range of non metallic seal less mag driv pumps.

Know more about a range of non metallic seal less mag driv pumps.

Published in: Business

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
59
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. Non-Metallic Seal-less Mag-Drive Pumps Seal-less Mag-Drive Pump Specialists SOLID PP & PVDF Thermoplastic Mag-Drive Pumps Centrifugal, Turbine, Self-Priming & Vertical
  • 2. From WARRENDER: Advanced design, materials and engineering technology Warrender Pumps - mag-drives built to survive d long after others fail WARRENDER, LTD. specializes in the application, engineering and distribution of technically advanced, hermetically sealed pumping systems. Industries worldwide have found an extensive program to serve their needs. Featuring 18 designs with over 250 basic models. This extensive pump range allows our engineering department to meet your exact process requirements. All WARRENDER, LTD. seal-less equipment is engineered to comply with the 1990 EPA Clean Air Act governing “Hazardous Air Pollutants”. ZERO LEAKAGE - ZERO CORROSION MCH Thermoplastic Centrifugal MCSP Thermoplastic Self-Primer The industry’s most comprehensive range of mag-drive pumps. d For over 25 years, we have been solving the most challenging process applications with leading edge pump technologies. Warrender can meet your specifications! www.warrender.com (2) sales@warrender.com
  • 3. Complete range of non-metallic mag-drive process pumps m d WARRENDER’S non-metallic mag-drive designs m d Constant research and development, combined with versatile and innovative production, has led to the industry’s most comprehensive range of non-metallic mag-drive pumps. Series • • • • • MCH MC-SP MCHV MT MT-SP • MP Thermoplastic Centrifugal Thermoplastic Centrifugal Self-Primer Thermoplastic Centrifugal Vertical Sump Thermoplastic Regenerative Turbine Thermoplastic Regenerative Turbine Self-Primer Thermoplastic Rotary Vane Materials of Construction • Pump casings & internal components: Simona polypropylene (PP) or polyvinylidene fluoride (PVDF) • Casing o-ring: EPDM, viton or FEP • Internal bearings: carbon filled PTFE or carbon • Shaft & thrust bearings: 99.7% pure alumina (ceramic) or silicon carbide Competition Series MCH Options • • • • Externally flushed rear cavity for slurries Heavy duty rear thrust bearing Dual containment shell Self-priming design for top unloading CNC Machined construction WARRENDER thermoplastic designs are uniquely constructed from *Simona Polypropylene (PP) or polyvinylidene fluoride (PVDF). Rugged pump casings and impeller assemblies are machined from solid extruded bar and block material. CNC machined construction provides distinctive advantages over molded or lined configurations. Typical casing wall thicknesses for molded pumps are only 1/8” - 1/4”; failures often result from chemical attack, thermal expansion and pipe stress. Lined pumps have a mere .090” - .120” lining thickness and the added risk of casing failures caused by separation, permeation or external corrosion. Solid thermoplastic pump casings feature wall thicknesses of 1/2” to 1-1/2” for the utmost in chemical resistance and durability. * Technical specifications available upon request www.warrender.com (3) sales@warrender.com
  • 4. MCH Series Centrifugal Pumps MCH pumps are fabricated from SOLID Simona PP or PVDF thermoplastics to resist internal or external corrosion. Heavy walled, CNC machined construction provide far greater resistance to permeation and migration of corrosive, and permeating liquids. Additionally, added strength and thermal stability resists deformation, even in the most severe applications. Technical Features • Exclusive SOLID machined PP or PVDF casings and impeller components for maximum chemical resistance • Heavy casing wall thicknesses • All plastic casing withstands external corrosion • Integral raised face flanges (no threaded adapters) to ensure zero leakage • Oversized, high purity ceramic or silicon carbide thrust bearings and shaft • Chemically resistant, channeled sleeve bearings • Modular impeller allows for varying hydraulic performances • Compact, high torque magnetic coupling with reduced mass • Standard, direct starting NEMA motors Rear Cartridge Commercial Benefits • Eliminates costly and complex mechanical seal systems • Avoidance of mechanical seals that cause production downtime • Zero leakage, magnetic coupling circumvents constant EPA monitoring and potential fines from excessive emissions associated with mechanical seals • Efficient hydraulic design minimizes power consumption • Magnetic coupling prevents the introduction of unwanted air into the process for higher production yields • Positive sealing with integral flanged ports eliminates the chance of emissions from plastic threads • Simplified maintenance, with registered fits, requires no special tools or settings • SOLID thermoplastic casings never corrode (internally or externally) • Premium machined Simona thermoplastics provide higher resistance to chemical and temperature degradation than molded or composite materials • Standard NEMA motor frame allows for low cost, fast replacements in the field www.warrender.com (4) Solid Block Machined Casing sales@warrender.com
  • 5. MCH Series MCH Dimensions & Specifications MCH with Foot Mounted Motor MCH Dimensions MCH with Pedestal Mounted Motor ( all dimensions in inches ) MODEL NO. IMPELLER SUCTION FLANGE DISCHARGE FLANGE D X Y Z CP F2 LJ WB MCH 11001 MCH 16001 MCH 28001 MCH 51001 MCH 81001 MCH 91001 4 4.5 4.5 6 6.5 7 1.5" 150# RF ANSI 2" 150# RF ANSI 2" 150# RF ANSI 3" 150# RF ANSI 4" 150# RF ANSI 4" 150# RF ANSI 1" 150# RF ANSI 1.5" 150# RF ANSI 1.5" 150# RF ANSI 2" 150# RF ANSI 3" 150# RF ANSI 3" 150# RF ANSI 3.5 3.54 3.5 6.89 7.87 7.87 5.04 5.87 5.87 6.73 7.44 8.94 2.99 2.76 3.31 4.06 4.76 5.08 2.09 2.28 2.48 2.87 3.23 4.02 9.25 9.37 10.03 12.64 14.49 14.92 N/A N/A N/A 2.39 2.87 2.99 N/A N/A N/A 9.84 1.42 11.42 N/A N/A N/A 8.66 9.84 9.84 MCH Specifications MODEL NO. PP / TEFC PORT SIZES SUCT / DISCH MCH11001-P2T1 MCH11001-P2F1 MCH16001-P2T1 MCH16001-P2F1 MCH28001-P2F1 MCH51001-P2F1 MCH81001-P2F1 MCH91001-P2F1 1.25" x 1" FNPT 1.5" x 1" FLANGE 1.5" x 1.25" FNPT 2" x 1.5" FLANGE 2" x 1.5" FLANGE 3" x 2" FLANGE 4" x 3" FLANGE 4" x 3" FLANGE MODEL NO. PVDF / TEFC PORT SIZES SUCT / DISCH MCH11001-V2T1 MCH11001-V2F1 MCH16001-V2T1 MCH16001-V2F1 MCH28001-V2F1 MCH51001-V2F1 MCH81001-V2F1 MCH91001-V2F1 1.25" x 1" FNPT 1.5" x 1" FLANGE 1.5" x 1.25" FNPT 2" x 1.5" FLANGE 2" x 1.5" FLANGE 3" x 2" FLANGE 4" x 3" FLANGE 4" x 3" FLANGE ( all dimensions in inches ) MAX FLOW-GPM MAX TDH-FT 3500/1750 RPM 3500/1750 RPM 50 / 25 50 / 25 75 / 40 75 / 40 120 / 70 180 / 100 400 / 200 550 / 250 65' / 18' 65' / 18' 90' / 28' 90' / 28' 85' / 29' 140' / 38' 160' / 40' 180' / 44' MAX FLOW-GPM MAX TDH-FEET 3500/1750 RPM 3500/1750 RPM 50 / 25 50 / 25 75 / 40 75 / 40 120 / 70 180 / 100 400 / 200 550 / 250 65' / 18' 65' / 18' 90' / 28' 90' / 28' 85' / 29' 140' / 38' 160' / 40' 180' / 44' www.warrender.com MATERIALS MAX (PSIG) PUMP, O-RING STD/DUAL CF PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM 110 110 110 110 110 / 150 110 / 150 110 / 150 110 / 150 MATERIALS MAX (PSIG) PUMP, O-RING STD/DUAL CF PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON (5) 110 110 110 110 110 / 150 110 / 150 110 / 150 110 / 150 MOTOR (HP) PUMP FRAME NEMA SIZE WT (LBS) 1 1 2 2 3 or 5 5 or 7.5 15 or 20 25 or 30 56-C 56-C 143/5-TC 143/5-TC 182/4-TC 182/4-TC, 213/5-TC 213/5-TC, 254/6-TC 284/6-TSC 9 9 13 13 60 94 101 104 MOTOR (HP) PUMP FRAME NEMA SIZE WT (LBS) 1 1 2 2 3 or 5 5 or 7.5 15 or 20 25 or 30 56-C 56-C 143/5-TC 143/5-TC 182/4-TC 182/4-TC, 213/5-TC 213/5-TC, 254/6-TC 284/6-TSC 10 11 15 16 63 101 109 112 sales@warrender.com
  • 6. MCH Series 3500 RPM (60 Hz) 1750 RPM (60 Hz) MCH Series www.warrender.com (6) sales@warrender.com
  • 7. MC - SP Series Centrifugal Self-Primer Pumps P The same basic features of MCH pumps apply to the MC-SP Series design with the addition of a self-contained, self-priming pump casing. MC-SP pumps provide smooth continuous leak-proof operation where top unloading is specified. Materials of Construction • • • • Pump casings & internal components: polypropylene or PVDF Casing o-ring: EPDM, viton or FEP Internal bearings: carbon filled PTFE or carbon Shaft & thrust bearings: 99.7% pure alumina (ceramic) or silicon carbide Performances • • • • Flows to 250 GPM (60 m3/h) Heads to 130 FT (35 m) System pressures to 110 PSIG (8 bar) Maximum Temperatures to: 230°F (110°C) Options • Externally flushed rear cavity for slurries • Dual containment shell PARTS LIST 10 20 30 40 50 61F 61R 62F 62R 71 75 80 85 88 90 78 NOTE: bearings and other wearing parts are shown in black. www.warrender.com (7) sales@warrender.com Rear Casing External Magnet Internal Magnet Impeller O-ring PTFEC Front Thrust Brg. PTFEC Rear Thrust Brg. CERAMIC Front Thrust Brg. CERAMIC Rear Thrust Brg. CERAMIC shaft / ring PTFEC Bearings (4) Kit Spares Pump Head Rear Wet End (kit + rear casing) Wet End Bracket
  • 8. MC - SP Series MCSP Dimensions & Specifications MCSP Dimensions MODEL NO. IMPELLER MC-SP 27501 MC-SP 50501 MC-SP 80501 4.75" 5.625" 6.375" ( all dimensions in inches ) SUCTION FLANGE D PORT SIZES SUCT / DISCH MCSP 27501-P2F1 1.5" x 1.5" FLANGE MCSP 50501-P2F1 2" x 2" FLANGE MCSP 80501-P2F1 3" x 3" FLANGE MCSP 27501-F2F1 1.5" x 1.5" FLANGE MCSP 50501-F2F1 2" x 2" FLANGE MCSP 80501-F2F1 3" x 3" FLANGE X Y S CP F2 LJ WB 5.35 6.89 7.87 1.5" 150# RF ANSI 1.5" 150# RF ANSI 2" 150# RF ANSI 2" 150# RF ANSI 3" 150# RF ANSI 3" 150# RF ANSI MCSP Specifications MODEL NO. PP / TEFC DISCHARGE FLANGE 12 14.88 14.72 8.43 10.59 12.83 6.69 9.17 9.94 15.67 19.17 20.82 2.6 2.32 2.87 7.6 9.84 11.42 6.1 8.66 9.84 ( all dimensions in inches ) PERFORMANCES GPM / TDH (MAX) MATERIALS PUMP, O-RING 80 / 80' 140 / 105' 250 / 120' 80 / 80' 140 / 105' 250 / 120' PP, EPDM PP, EPDM PP, EPDM PP/ PVDF, EPDM PP/ PVDF, EPDM PP/ PVDF, EPDM www.warrender.com (8) MAX (PSIG) MAX TEMP STD/DUAL CF (DEG F) 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 140 140 140 180 180 180 POWER (HP) PUMP FRAME NEMA SIZE WT (LBS) PUMP END 3 or 5 5 or 7.5 10 or 15 3 or 5 5 or 7.5 10 or 15 182/4-TC 182/4-TC, 213/5-TC 213/5-TC 182/4-TC 182/4-TC, 213/5-TC 213/5-TC 85 115 125 85 115 125 sales@warrender.com
  • 9. MCH V Series Vertical Centrifugal Sump Pumps MCHV seal-less vertical pumps do not require mechanical or lip seals, ensuring leak-proof handling of corrosives.The heavy duty shaft is supported by ball bearings with no bushings to wear; shaft deflection is thereby eliminated. MCHV pumps are fabricated from Simona polypropylene to resist internal or external corrosion. The hermetically sealed column is permanently isolated from corrosive liquid or fumes. Materials of Construction • • • • Pump casings & internal components: PP or PVDF Casing o-ring: EPDM, viton or FEP Internal bearings: carbon filled PTFE or carbon Shaft & thrust bearings: 99.7% pure alumina Performances • See MCH performance curves Technical Features • • • • Non-cantilevered shaft Hermetically sealed column Isolated heavy duty column shaft with oversized ball bearings Exclusive solid CNC machined thermoplastic casings and impeller components • Oversized, high purity ceramic or silicon carbide thrust bearings and shaft • Modular impeller allows for modifying performances • Direct starting NEMA motors Commercial Benefits • Eliminates costly and complex mechanical seal systems • Avoidance of seals and bearing flush lines that cause production downtime • Zero leakage, magnetic coupling circumvents constant EPA monitoring and potential fines from excessive emissions • High hydraulic efficiencies minimize power consumption • Magnetic coupling prevents the introduction of unwanted air into the process • Simplified maintenance, with registered fits, requires no special tools or settings • SOLID thermoplastic casings never corrode (internally or externally) • Premium machined Simona thermoplastics provide higher resistance to chemical and temperature degradation than molded components • Standard NEMA motor frame allows for low cost, fast replacements in the field www.warrender.com (9) sales@warrender.com
  • 10. MCH Series Internal Magnet Fully encapsulated, rare earth magnets have exceptional torque capability to provide slip-free synchronized performance Sleeve Bearings Two-piece design available in carbon and SIC to suit your application needs. Impeller Thrust Bearing Replaceable and oversized to easily accommodate thrust loads. Driver Standard motor is utilized for simple close coupled mounting Impeller Bracket Separate piece allows you to interchange among internal magnet drives. Joins the pump to the driver. External Magnet Rear Casing Non-metallic reinforced polymer eliminates heat and efficiency losses usually associated with metallic mag-drives. O-Ring Single (fully confined) O-ring for better sealing reliability. Machined from solid block PP or PVDF with optional raised face flanges for superior performance. Shaft Stationary shaft simplifies the design and is made from 99.7% pure alumina ceramic. Thrust Bearing Casing Uses rare earth magnets and is dynamically balanced to extend motor bearing life. Provides stable, oversized axial thrust surface for impeller assembly. Self-Priming Model MCSP offers the same benefits with the addition of a self-contained, self-priming pump casing. MCSP pumps provide smooth, continuous leak-proof operation where top unloading is required. www.warrender.com (10) sales@warrender.com
  • 11. MT Series Stationary Shaft Design for MT Models 7003 or larger Shaft Made from 99.7% pure alumina ceramic. Driver Standard motor is utilized for simple close coupled mounting Impeller Precision machined from a single piece of PVDF. Hydraulically balanced to eliminate axial thrust loads. Rear Ring Bracket Encloses the impeller and completes the volute pathway. Joins the pump to the driver. External Magnet Rear Casing Uses rare earth magnets and is dynamically balanced to extend motor bearing life. Non-metallic reinforced polymer eliminates heat and efficiency losses usually associated with metallic mag-drives. O-Ring Single (fully confined) O-ring for better sealing reliability. Casing Machined from solid block PP or PVDF with optional raised face flanges for superior performance. Stationary Shaft Design for MT Models 7002 and lower Internal Magnet Assembly & Shaft Impeller Precision machined from a single piece of PVDF. Hydraulically balanced to eliminate axial thrust loads. Rear Ring Encloses the impeller and completes the volute pathway. Fully encapsulated, rare earth magnets have exceptional torque capability to provide slip-free synchronized performance. The 2 piece shaft is made from 99.7% pure alumina (ceramic). www.warrender.com (11) sales@warrender.com Using a Regenerative Turbine as a mixer Feed two different liquids (or a liquid and gas) into the suction side of the pump. The rotary impeller motion quickly and efficiently mixes the two substances together. The turbine’s strong stirring capabilities eliminate the need to use a static mixer or diffusion pipe.
  • 12. MT Series Regenerative Turbine Pumps Ideally suited to low flow applications, MT regenerative turbine pumps avoid oversized centrifugals, that require flow by-passing and excessive horsepower. MT non-metallic turbine designs have excellent chemical resistance and extremely low wear characteristics. Variation in head calculations have minimal effect on the flow of a turbine pump. Also, turbine pumps can be throttled to a required duty point without by-passing. Features • Exclusive solid machined PP or PVDF casings and impeller components • Heavy casing wall thicknesses • Withstands external corrosion • Integral raised face flanges (no threaded adapters) to ensure zero leakage • Oversized, high purity ceramic shaft • Chemically resistant carbon sleeve bearings • Self-balancing impeller eliminates thrust bearing wear • Handles up to 20% entrained gas, resists cavitation • Separate impeller minimizes maintenance costs • Direct starting, standard NEMA motors Materials of Construction • • • • Pump casings & internal components: PP or PVDF Casing o-ring: EPDM, viton or FEP Internal bearings: carbon filled PTFE or carbon Shaft: 99.7% pure alumina (ceramic) Performance • • • • Flows to 60 GPM (14 m3/h) Heads to 180 FT (50 m) System pressures to 110 PSIG (8 bar) Temperatures to: 230°F (110°C) MT pedestal pump Options • Dual containment shell www.warrender.com MT self-balancing impellers eliminate axial thrust loads. (12) sales@warrender.com
  • 13. MT Series MT Dimensions MT with Foot Mounted Motor MT with Pedestal Mounted Motor MODEL NO. NPT MT 2002 MT 3002 MT 3003 MT 5002 MT 5003 MT 7002 MT 7003 MT 9002 MT 9003 MT 16002 MT 16003 1/2" 3/4" 3/4" 1" 1" 1" 1" 1" 1" 1.25" 1.25" SUCTION FLANGE 1/2" 150# RF ANSI 3/4" 150# RF ANSI 3/4" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1.25" 150# RF ANSI 1.25" 150# RF ANSI DISCHARGE NPT FLANGE 1/2" 3/4" 3/4" 1" 1" 1" 1" 1" 1" 1.25" 1.25" 1/2" 150# RF ANSI 3/4" 150# RF ANSI 3/4" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1.25" 150# RF ANSI 1.25" 150# RF ANSI www.warrender.com (13) D X Y CP F2 LJ WB 2.48 3.50 3.50 3.50 3.50 3.50 3.50 3.50 5.35 7.87 7.87 4.72 5.51 5.51 6.30 6.30 6.30 7.48 7.48 7.48 9.82 9.82 1.22 1.22 1.22 1.42 1.42 1.42 1.57 1.57 1.57 1.73 1.73 5.12 7.06 7.60 8.23 8.23 9.06 9.21 9.21 9.72 9.65 9.65 N/A N/A N/A N/A N/A N/A N/A N/A 2.87 2.80 2.80 N/A N/A N/A N/A N/A N/A N/A N/A 7.59 11.40 11.40 N/A N/A N/A N/A N/A N/A N/A N/A 4.70 9.82 9.82 sales@warrender.com
  • 14. MT Series MT Specifications MODEL NO. PP / TEFC PORT SIZES SUCT/DISCH MT2002-P1T1 1/2" x 1/2" FNPT MT2002-P1F1 1/2" x 1/2" FLANGE MT2003-P1T1 1/2" x 1/2" FNPT MT2003-P1F1 1/2" x 1/2" FLANGE MT3002-P1T1 3/4" x 3/4" FNPT MT3002-P1F1 3/4" x 3/4" FLANGE MT3003-P2T1 3/4" x 3/4" FNPT MT3003-P2F1 3/4" x 3/4" FLANGE MT5002-P2T1 1" x 1" FNPT MT5002-P2F1 1" x 1" FLANGE MT5003-P2T1 1" x 1" FNPT MT5003-P2F1 1" x 1" FLANGE MT7002-P2T1 1" x 1" FNPT MT7002-P2F1 1" x 1" FLANGE MT7003-P2T1 1" x 1" FNPT MT7003-P2F1 1" x 1" FLANGE MT9002-P2T1 1" x 1" FNPT MT9002-P2F1 1" x 1" FLANGE MT16002-P2T1 1.25" x 1.25" FNPT MT16002-P2F1 1.25" x 1.25" FLANGE MODEL NO. PVDF / TEFC PORT SIZES SUCT/DISCH MT2002-V1T1 1/2" x 1/2" FNPT MT2002-V1F1 1/2" x 1/2" FLANGE MT2003-V1T1 1/2" x 1/2" FNPT MT2003-V1F1 1/2" x 1/2" FLANGE MT3002-V1T1 3/4" x 3/4" FNPT MT3002-V1T1 3/4" x 3/4" FLANGE MT3003-V2T1 3/4" x 3/4" FNPT MT3003-V2F1 3/4" x 3/4" FLANGE MT5002-V2T1 1" x 1" FNPT MT5002-V2F1 1" x 1" FLANGE MT5003-V2T1 1" x 1" FNPT MT5003-V2F1 1" x 1" FLANGE MT7002-V2T1 1" x 1" FNPT MT7002-V2F1 1" x 1" FLANGE MT7003-V2T1 1" x 1" FNPT MT7003-V2F1 1" x 1" FLANGE MT9002-V2T1 1" x 1" FNPT MT9002-V2F1 1" x 1" FLANGE MT16002-V2T1 1.25" x 1.25" FNPT MT16002-V2F1 1.25" x 1.25" FLANGE PERFORMANCES GPM/TDH (MAX) MATERIALS PUMP, O-RING MAX (PSIG) STD/DUAL CF MAX TEMP (F) PP/PVDF RWE POWER (HP) PUMP FRAME TYPE WT (LBS.) PUMP END 9 / 37' 9 / 37' 9 / 47' 9 / 47' 13 / 60' 13 / 60' 15 / 110' 15 / 110' 22 / 112' 22 / 112' 25 / 130' 25 / 130' 30 / 125' 30 / 125' 31 / 160' 31 / 160' 45 / 160' 45 / 160' 60 / 180' 60 / 180' PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 1/3 HP 1/3 HP 1/3 or 1/2 HP 1/3 or 1/2 HP 1/2 HP 1/2 HP 3/4 or 1 HP 3/4 or 1 HP 1 or 1-1/2 HP 1 or 1-1/2 HP 1-1/2 or 2 HP 1-1/2 or 2 HP 2 or 3 HP 2 or 3 HP 3 or 5 HP 3 or 5 HP 5 or 7-1/2 HP 5 or 7-1/2 HP 10 or 15 HP 10 or 15 HP A-63 A-63 56-C 56-C 56-C 56-C 56-C 56-C 56-C 56-C 143/5-TC 143/5-TC 143/5-TC 143/5-TC 182/4-TC 182/4-TC 182/4-TC 182/4-TC 213/5, 254/6-TC 213/5, 254/6-TC 11 w/ motor 11 w/ motor 8 8 8 9 8 9 8 9 11 12 11 12 61 62 61 62 93 94 PERFORMANCES GPM/TDH (MAX) MATERIALS PUMP, O-RING MAX (PSIG) STD/DUAL CF MAX TEMP (F) PVDF POWER (HP) PUMP FRAME SIZE WT (LBS) PUMP END 9 / 37' 9 / 37' 9 / 47' 9 / 47' 13 / 60' 13 / 60' 15 / 110' 15 / 110' 22 / 112' 22 / 112' 25 / 130' 25 / 130' 30 / 125' 30 / 125' 31 / 160' 31 / 160' 45 / 160' 45 / 160' 60 / 180' 60 / 180' PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 1/3 HP 1/3 HP 1/3 or 1/2 HP 1/3 or 1/2 HP 1/2 HP 1/2 HP 3/4 or 1 HP 3/4 or 1 HP 1 or 1-1/2 HP 1 or 1-1/2 HP 1-1/2 or 2 HP 1-1/2 or 2 HP 2 or 3 HP 2 or 3 HP 3 or 5 HP 3 or 5 HP 5 or 7-1/2 HP 5 or 7-1/2 HP 10 or 15 HP 10 or 15 HP A-63 A-63 56-C 56-C 56-C 56-C 56-C 56-C 56-C 56-C 143/5-TC 143/5-TC 143/5-TC 143/5-TC 182/4-TC 182/4-TC 182/4-TC 182/4-TC 213/5, 254/6-TC 213/5, 254/6-TC 12 w/ motor 12 w/ motor 9 10 9 10 9 10 9 10 12 13 12 13 66 68 66 68 100 102 www.warrender.com (14) sales@warrender.com
  • 15. MT Series 3500 RPM (60 Hz) MT Series 2900 RPM (50 Hz) www.warrender.com (15) sales@warrender.com
  • 16. MT - SP Series Regenerative Turbine Self-Primer Pumps P The same basic features of MT pumps apply to the MT-SP series design with the addition of a self-contained, self-priming pump casing. MT-SP pumps provide smooth, continuous, leak-proof operation where top unloading is required. Performances • • • • Flows to 60 GPM (14 m3/h) Heads to 180 FT (50 m) System pressures to 110 PSIG (8 bar) Temperatures to: 230°F (110°C) Options • Dual containment shell PARTS LIST 10 20 30 40 50 62 70 75 78 85 86 88 90 www.warrender.com (16) sales@warrender.com Rear Casing External Magnet Internal Magnet Impeller O-ring Rear Ring Shaft Bearings Bracket Pump Head Check Valve + Gasket set Rear Wet End (kit + rear casing) Wet End
  • 17. MT - SP Series MTSP Dimensions & Specifications MTSP with Foot Mounted Motor MTSP with Pedestal Mounted Motor MODEL NO. NPT MTSP 2503 MTSP 3503 MTSP 5503 MTSP 7503 MTSP 9502 MTSP 16502 MTSP 2503 MTSP 3503 MTSP 5503 MTSP 7503 MTSP 9502 MTSP 16502 SUCTION FLANGE 1/2" 3/4" 1" 1" 1" 1-1/4" DISCHARGE NPT FLANGE 1/2" 150# RF ANSI 3/4" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1.25" 150# RF ANSI 1/2" 150# RF ANSI 3/4" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1" 150# RF ANSI 1.25" 150# RF ANSI www.warrender.com S X Y Y2 CP F2 LJ WB 2.50 2.79 3.14 5.35 5.35 7.87 1/2" 3/4" 1" 1" 1" 1-1/4" D 6.75 7.04 7.40 11.33 11.33 14.56 6.50 6.69 6.69 8.93 8.93 10.23 6.13 6.77 6.77 8.22 8.22 10.03 0.62 0.66 0.66 0.25 0.25 0.86 4.75 5.66 6.18 7.51 7.51 9.64 N/A N/A N/A 2.87 2.87 2.79 N/A N/A N/A 7.59 7.59 11.41 N/A N/A N/A 6.10 6.10 9.84 2.50 2.79 3.14 5.35 5.35 7.87 6.75 7.04 7.40 11.33 11.33 14.56 8.25 8.50 8.50 10.74 10.74 12.40 7.87 8.58 8.58 10.03 10.03 12.12 0.62 0.66 0.66 0.25 0.25 0.86 4.75 5.66 6.18 7.51 7.51 9.64 N/A N/A N/A 2.87 2.87 2.79 N/A N/A N/A 7.59 7.59 11.41 N/A N/A N/A 6.10 6.10 9.84 (17) sales@warrender.com
  • 18. MT - SP Series MODEL NO. PP / TEFC PORT SIZES SUCT/DISCH PERFORMANCES GPM/TDH (MAX) MATERIALS PUMP, O-RING MAX (PSIG) STD/DUAL CF MAX TEMP (F) PP/PVDF RWE POWER (HP) PUMP FRAME NEMA SIZE WT (LBS.) PUMP END MTSP2503-P1T1 MTSP2503-P1F1 MTSP3503-P2T1 MTSP3503-P2F1 MTSP5503-P2T1 MTSP5503-P2F1 MTSP7503-P2T1 MTSP7503-P2F1 MTSP9502-P2T1 MTSP9502-P2F1 MTSP16502-P2T1 MTSP16502-P2F1 1/2" x 1/2" FNPT 1/2" x 1/2" FLANGE 3/4" x 3/4" FNPT 3/4" x 3/4" FLANGE 1" x 1" FNPT 1" x 1" FLANGE 1" x 1" FNPT 1" x 1" FLANGE 1" x 1" FNPT 1" x 1" FLANGE 1.25" x 1.25" FNPT 1.25" x 1.25" FLANGE 9 / 47' 9 / 47' 15 / 110' 15 / 110' 25 / 130' 25 / 130' 31 / 160' 31 / 160' 45 / 160' 45 / 160' 60 / 160' 60 / 160' PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM PP, EPDM 110 110 110 110 110 110 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 140 / 180 1/3 or 1/2 HP 1/3 or 1/2 HP 3/4 or 1 HP 3/4 or 1 HP 1-1/2 or 2 HP 1-1/2 or 2 HP 3 or 5 HP 3 or 5 HP 5 or 7-1/2 HP 5 or 7-1/2 HP 10 or 15 HP 10 or 15 HP 56-C 56-C 56-C 56-C 143/5-TC 143/5-TC 182/4-TC 182/4-TC 182/4-TC 182/4-TC 213/5, 254/6-TC 213/5, 254/6-TC 10 10 10 11 13 14 70 70 70 70 105 105 MODEL NO. PVDF / TEFC PORT SIZES SUCT/DISCH PERFORMANCES GPM / TDH (MAX) MATERIALS PUMP, O-RING MAX (PSIG) STD/DUAL CF MAX TEMP (F) PVDF POWER (HP) PUMP FRAME NEMA SIZE WT (LBS.) PUMP END MTSP2503-V1T1 MTSP2503-V1F1 MTSP3503-V2T1 MTSP3503-V2F1 MTSP5503-V2T1 MTSP5503-V2F1 MTSP7503-V2T1 MTSP7503-V2F1 MTSP9502-V2T1 MTSP9502-V2F1 MTSP16502-V2T1 MTSP16502-V2F1 MTSP16503-V2T1 MTSP16503-V2F1 1/2" x 1/2" FNPT 1/2" x 1/2" FLANGE 3/4" x 3/4" FNPT 3/4" x 3/4" FLANGE 1" x 1" FNPT 1" x 1" FLANGE 1" x 1" FNPT 1" x 1" FLANGE 1" x 1" FNPT 1" x 1" FLANGE 1" x 1" FNPT 1" x 1" FLANGE 1.25" x 1.25" FNPT 1.25" x 1.25" FLANGE 9 / 47' 9 / 47' 15 / 110' 15 / 110' 25 / 130' 25 / 130' 31 / 160' 31 / 160' 45 / 160' 45 / 160' 60 / 160' 60 / 160' 60 / 180' 60 / 180' PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON PVDF, VITON 110 110 110 110 110 110 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 110 / 150 180 180 180 180 180 180 180 180 180 180 180 180 180 180 1/3 or 1/2 HP 1/3 or 1/2 HP 3/4 or 1 HP 3/4 or 1 HP 1-1/2 or 2 HP 1-1/2 or 2 HP 3 or 5 HP 3 or 5 HP 5 or 7-1/2 HP 5 or 7-1/2 HP 10 or 15 HP 10 or 15 HP 10 or 15 HP 10 or 15 HP 56-C 56-C 56-C 56-C 143/5-TC 143/5-TC 182/4-TC 182/4-TC 182/4-TC 182/4-TC 213/5-TC or 254/6-TC 213/5-TC or 254/6-TC 213/5-TC or 254/6-TC 213/5-TC or 254/6-TC 14 15 14 15 17 18 76 77 76 77 121 123 121 123 3500 RPM (60 Hz) www.warrender.com (18) sales@warrender.com
  • 19. Data Sheet WARRENDER SEAL-LESS MAG-DRIVE PUMP DATA SHEET Application Current Pump When Needed: Immediate 1 Week Manufacturer: Model Number: Impeller Dia: Material: Suc. Port Dia: Dis. Port Dia: Sys. Pipe Size: HP / RPM: 1 Month Date: Distributor: Location: Contact: Phone: Fax: Customer: Location: Quantity: Fluid / Concentration: 3-6 Months Future Particles Present ? Item / Tag No.: Max. ANSI Min. Unknown % by Volume: Non-ANSI Self-Primer Material: Alloy Non-Metallic Ports: NPT Flanged O-Ring / Gasket Material: Motor: TEFC Chem Duty Capacity (GPM) Suc. Press (PSIG) Dis. Press (PSIG) TDH (ft) Temp. (deg. oF) Spec. Gravity Viscosity (cPs) Vapor Press. (PSIA) Specific Heat Tank Volume (gal.) NPSH (ft) Suction Lift (ft) Other Explosion Proof Could pump run dry ? Yes Could pump be Dead-Headed ? No Yes No Mounting Configuration: Bearing Frame for Base Mounting Close Coupled Options: Suggested Pump Selection: Centrifugal No Pump Design: Design Pump Model#: Yes If Yes, Particle Size: Particle Hardness: Turbine Self-Priming Rotary Vane Pump Material: Base Plate LINEMAN Power Monitor (req. for warranty) Thermocouple Probe (non-wetted) Jacketed Casing Self-Cleaning Strainer (MCA Models) System Sketch Fax this sheet to: Warrender, Ltd. 847-247-8680 www.warrender.com (19) sales@warrender.com
  • 20. WARRENDER, LTD. Authorized Distributor: 28401 N. Ballard Dr., Suite H Lake Forest, IL 60045 Phone: 847-247-8677 Toll Free: 888-24 PUMPS Fax: 847-247-8680 web site: www.warrender.com email: sales@warrender.com NON-MET 04