0
SBBU Small Business Wireless Portfolio
Wireless Access Point portfolio WAP200E WAP200 WAP4410N WET200 Wireless Bridge 802.11g 802.11n Outdoor Indoor
Access Point Business Focus <ul><li>Cisco Small Business solution purpose-built to meet the needs of the small businesses ...
<ul><li>802.1p QoS to WMM mapping </li></ul><ul><ul><li>Mapping of Wired to wireless QoS maintains consistent Voice/Video ...
Wireless Solution Example <ul><li>Key Features: </li></ul><ul><li>802.11g WiFi with PoE </li></ul><ul><li>Multiple SSID->V...
WAP4410N Overview <ul><li>Small Business focused Wireless-N (IEEE 802.11n Draft 2.0 compliant) </li></ul><ul><li>Key Featu...
<ul><li>Security </li></ul><ul><ul><li>Wi-Fi Protected Setup (WPS) </li></ul></ul><ul><ul><li>802.1x supplicant for wired ...
WAP4410N - Features & Benefits <ul><li>1. Feature:  Wireless-N Draft 2.0 </li></ul><ul><li>Benefit:  Maintains throughput ...
Features & Benefits <ul><li>5.  Feature:  IPv6 </li></ul><ul><li>Benefit: Delivering the infrastructure to support IPv6-en...
Features & Benefits <ul><li>8.  Feature:  WPS (WiFi Protected Setup) </li></ul><ul><li>Benefit: A WiFi Alliance certificat...
Features & Benefits <ul><li>12.  Feature:  Spanning Tree </li></ul><ul><li>Benefit: Supports 802.1d Spanning Tree protocol...
WAP200 – Business Wireless-G AP <ul><li>Low-Cost, Feature-Rich Solution For Price-Sensitive Environments </li></ul><ul><li...
WAP200E Outdoor Wireless AP <ul><li>Interior Access Point and Exterior Wireless Access Point </li></ul><ul><li>Key Feature...
Product Differences
Wireless Security Monitoring <ul><li>Developed by Cisco-Linksys  </li></ul><ul><ul><li>Provides rogue AP and client detect...
Security Monitoring - New AP Detection New AP WAP4400N WAP4400N
WET200 Wireless Bridge <ul><li>Wireless Bridge with integrated 5-port switch </li></ul><ul><ul><li>Solution pairs with WAP...
200-Series Client Adapters <ul><li>Client solution to pair with WAP200 and WRV200 </li></ul><ul><li>3 Flavors </li></ul><u...
Wireless Adapters Comparison Product WPC200 WMP200 WUSB200 Wireless Type 802.11g 802.11g 802.11g MIMO 1x2 1x2 1x2 New AP/C...
Antennas <ul><li>HGA9N </li></ul><ul><ul><li>Omni-Directional antenna for: </li></ul></ul><ul><ul><ul><li>WAP200E </li></u...
Backup
Access Point Mode <ul><li>AP Mode supported on all Cisco Small Business Access Points </li></ul><ul><li>Network  wired or ...
WDS (Wireless Distribution System) Bridging and Repeater Mode <ul><li>Supported on WAP200/2000, WAP200E, WRV200 </li></ul>...
WDS – Wireless Distribution System Repeater Mode Diagram <ul><li>An AP can bridge up to 3 APs in Bridge or Repeater modes ...
Bridging with WET200 <ul><li>Network  wired  devices to network backbone from areas to where there’s no cabling: </li></ul...
Upcoming SlideShare
Loading in...5
×

Cisco Small Business Wireless Portfolio

2,101

Published on

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
2,101
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
47
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • Transcript of "Cisco Small Business Wireless Portfolio"

    1. 1. SBBU Small Business Wireless Portfolio
    2. 2. Wireless Access Point portfolio WAP200E WAP200 WAP4410N WET200 Wireless Bridge 802.11g 802.11n Outdoor Indoor
    3. 3. Access Point Business Focus <ul><li>Cisco Small Business solution purpose-built to meet the needs of the small businesses </li></ul><ul><li>Specific features are: </li></ul><ul><ul><li>Multiple BSSIDs - Solution acts as multiple APs each serving a different wireless network or VLAN. Can use for secure Business network and Guest Access </li></ul></ul><ul><ul><li>802.1q VLANs - Multiple VLANs keep traffic separate on the LAN side </li></ul></ul><ul><ul><li>WPA2 Enterprise – Secure, centralized authentication using a Radius </li></ul></ul><ul><ul><li>New Client and New AP detection – alerts administrator when new Access Points and clients enter the airspace </li></ul></ul><ul><ul><li>WMM QoS – Wireless Quality of Service </li></ul></ul><ul><ul><li>Gigabit Interface on 11n – high performance </li></ul></ul><ul><ul><li>802.11F Roaming – Mobility for Wireless clients while connected </li></ul></ul><ul><ul><li>Auto-channel Selection – Selects optimal channel for best performance </li></ul></ul><ul><ul><li>SNMP – Monitoring from an SNMP Management station </li></ul></ul>Security Performance/Mgmt
    4. 4. <ul><li>802.1p QoS to WMM mapping </li></ul><ul><ul><li>Mapping of Wired to wireless QoS maintains consistent Voice/Video quality across both domains </li></ul></ul><ul><li>WDS </li></ul><ul><ul><li>Wireless Bridging for building-to-building applications </li></ul></ul><ul><li>Power </li></ul><ul><ul><li>POE – Flexibly install AP in optimal locations </li></ul></ul><ul><ul><li>U-APSD – optimizes battery power usage of connected WIFI phones </li></ul></ul>Additional Small Business Features QoS and Range Power
    5. 5. Wireless Solution Example <ul><li>Key Features: </li></ul><ul><li>802.11g WiFi with PoE </li></ul><ul><li>Multiple SSID->VLAN Mapping </li></ul><ul><li>Security and QoS </li></ul><ul><ul><li>802.1x, WPA, WMM </li></ul></ul><ul><li>Multiple AP Modes </li></ul><ul><ul><li>AP, P to P, P to MP </li></ul></ul>WAP200 PoE or AC/DC Power Data SSID Voice SSID Customer Data WiFi IP Phone SRW224G4P Managed PoE SW WAP200E WAP200E Guest SSID Internet Router/ Gateway Guest
    6. 6. WAP4410N Overview <ul><li>Small Business focused Wireless-N (IEEE 802.11n Draft 2.0 compliant) </li></ul><ul><li>Key Features </li></ul><ul><ul><li>Multiple BSSIDs (4) – Segment wireless network amongst workgroups & guests </li></ul></ul><ul><ul><li>Wireless Distribution System (WDS) – Bridging and Repeater capabilities for extended reach and deployment scenarios. </li></ul></ul><ul><ul><li>Robust security capabilities such as WPA2, an 802.1x supplicant, Rogue AP Detection </li></ul></ul><ul><li>Key Differentiators –WDS, Multiple BSSIDs, 802.1x supplicant, VLANs, QoS, WMM </li></ul><ul><li>Availability – Now Shipping </li></ul>
    7. 7. <ul><li>Security </li></ul><ul><ul><li>Wi-Fi Protected Setup (WPS) </li></ul></ul><ul><ul><li>802.1x supplicant for wired LAN interface </li></ul></ul><ul><ul><li>Wireless Client Isolation between SSIDs </li></ul></ul><ul><ul><li>Multiple BSSIDs – optional HTTP Redirect </li></ul></ul><ul><ul><li>Rogue AP detection </li></ul></ul><ul><li>Advanced Technologies </li></ul><ul><ul><li>Wireless Distribution System (WDS) </li></ul></ul><ul><ul><li>Supports 802.11n Draft v2.0 </li></ul></ul><ul><ul><li>IPv6 Support </li></ul></ul><ul><ul><li>WMM to 802.1p QoS (Layer-2 prioritization) </li></ul></ul><ul><ul><li>Wireless Load Balancing </li></ul></ul>Product & Feature Enhancements
    8. 8. WAP4410N - Features & Benefits <ul><li>1. Feature: Wireless-N Draft 2.0 </li></ul><ul><li>Benefit: Maintains throughput at much greater range without interruption and increased interoperability. </li></ul><ul><ul><ul><li>Wireless-N Draft 2.0 Certified (Wi-Fi) </li></ul></ul></ul><ul><ul><ul><li>MIMO: Multiple input / Multiple output using 3x3 (Tx x Rx) Antennas </li></ul></ul></ul><ul><ul><ul><li>Wi-Fi Certified – WMM, U-APSD (WMM Power Save), WPA(2) </li></ul></ul></ul><ul><li>2 . Feature: Rogue AP detection </li></ul><ul><li>Benefit: Notifies the administrator when unapproved Access Points are detected within the airspace. Monitor devices being used in the network and in the vicinity of the business </li></ul><ul><li>Feature: 802.1x Supplicant </li></ul><ul><li>Benefit: Allows AP to authenticate to the wired network via RADIUS </li></ul><ul><li>4. Feature: HTTP redirect </li></ul><ul><li>Benefit: Allows the display an HTTP Splash screen or company network usage policy when clients associate with the AP </li></ul>
    9. 9. Features & Benefits <ul><li>5. Feature: IPv6 </li></ul><ul><li>Benefit: Delivering the infrastructure to support IPv6-enabled applications. Peer-to-peer applications like Meetingspace in Vista operates efficiently with IPv6 - uses IPv4 as a last resort </li></ul><ul><ul><li>SBBU has IPv6 functionality across switches, routers, NAS, Wireless, Cameras, etc. </li></ul></ul><ul><ul><li>Dual IPv4/IPv6 stack allows for transitioning of a network to IPv6 in a controlled fashion </li></ul></ul><ul><li>6. Feature: Multiple BSSIDs </li></ul><ul><li>Benefit: Solution acts as multiple APs each serving a different wireless network or VLAN. Can use for secure Business network and Guest Access </li></ul><ul><li>7. Feature: Power over Ethernet (PoE) </li></ul><ul><li>Benefit: Flexibility to install AP in optimal and hard-to-reach locations by sharing power and data on a single cable. </li></ul>
    10. 10. Features & Benefits <ul><li>8. Feature: WPS (WiFi Protected Setup) </li></ul><ul><li>Benefit: A WiFi Alliance certification for simple and secure setup of a wireless network. </li></ul><ul><li>9. Feature: WMM Power Save (U-APSD ) </li></ul><ul><li>Benefit: optimizes battery power usage of connected WiFi phones and other mobility devices. </li></ul><ul><li>10. Feature: WPA2 Enterprise </li></ul><ul><li>Benefit: Secure, centralized authentication using RADIUS </li></ul><ul><li>11. Feature: VLANs </li></ul><ul><li>Benefit: Multiple VLANs keep traffic separate on the LAN network </li></ul><ul><li>For example – separate Sales, Marketing, Admin & Engineering or Data, Voice, Video, and Guests on individual VLANs. </li></ul>
    11. 11. Features & Benefits <ul><li>12. Feature: Spanning Tree </li></ul><ul><li>Benefit: Supports 802.1d Spanning Tree protocol to prevent loops when using WDS links in a redundant fashion for fault tolerance </li></ul><ul><li>13. Feature: WDS (Wireless Distribution System) </li></ul><ul><li>Benefit: Support for Wireless Bridging for building-to-building applications and Repeater mode for extended reach of the wireless network </li></ul><ul><li>14. Feature: Load Balancing </li></ul><ul><li>Benefit: This capability allows the connections to APs in the network to be spread across multiple APs </li></ul><ul><li>15. Feature: Automatic channel Selection </li></ul><ul><li>Benefit: On boot up, the AP selects the least congested channel, facilitating optimal performance of the wireless network </li></ul>
    12. 12. WAP200 – Business Wireless-G AP <ul><li>Low-Cost, Feature-Rich Solution For Price-Sensitive Environments </li></ul><ul><li>Key Features </li></ul><ul><ul><li>Multiple BSSIDs </li></ul></ul><ul><ul><li>Strong QoS – 802.1p/q and WMM </li></ul></ul><ul><ul><li>POE + External Power </li></ul></ul><ul><ul><li>WPA2, WPA-ENT, WPA-PSK </li></ul></ul><ul><ul><li>SSID to VLAN mapping </li></ul></ul><ul><ul><li>Removable antennas </li></ul></ul><ul><ul><li>Advanced Wireless Features </li></ul></ul><ul><ul><ul><li>Roaming </li></ul></ul></ul><ul><ul><ul><li>Load Balancing </li></ul></ul></ul><ul><ul><ul><li>Auto-Channel Selection </li></ul></ul></ul><ul><li>Key Differentiators –1x2 MIMO, Multiple BSSIDs, VLANs, WMM, Auto-channel Selection, Removable Antennas </li></ul>
    13. 13. WAP200E Outdoor Wireless AP <ul><li>Interior Access Point and Exterior Wireless Access Point </li></ul><ul><li>Key Features: </li></ul><ul><ul><li>POE – PD power means AP can be powered from a POE switch </li></ul></ul><ul><ul><li>1x2 MIMO – better coverage and range </li></ul></ul><ul><ul><li>QoS (WMM, 802.1p), VLANs, WPA2, 802.1x </li></ul></ul><ul><ul><li>Multiple BSSIDs; Roaming and Auto-channel selection </li></ul></ul><ul><ul><li>NEMA IP53 Weatherproof housing (WAP200E) </li></ul></ul><ul><ul><li>Internal Directional Antenna </li></ul></ul><ul><li>Key Differentiators –1x2 MIMO, Multiple BSSIDs, VLANs, WMM, Auto-channel Selection </li></ul><ul><li>Now Shipping </li></ul>
    14. 14. Product Differences
    15. 15. Wireless Security Monitoring <ul><li>Developed by Cisco-Linksys </li></ul><ul><ul><li>Provides rogue AP and client detection </li></ul></ul><ul><ul><li>Support on WAP4400N and WPC4400N, and WAP200/E + 200-series Clients – both clients and AP required </li></ul></ul><ul><li>AP and clients work as wireless monitoring probes </li></ul><ul><ul><li>Most solutions rely on the AP only </li></ul></ul><ul><ul><li>Using clients increases coverage area </li></ul></ul><ul><li>Light-weight client utility replaces expensive management server </li></ul><ul><ul><li>Status reports provide: </li></ul></ul><ul><ul><ul><li>Channel usage </li></ul></ul></ul><ul><ul><ul><li>SSIDs in use </li></ul></ul></ul><ul><ul><li>Alerts users of new AP and Client </li></ul></ul><ul><ul><ul><li>No alerts for existing devices </li></ul></ul></ul>
    16. 16. Security Monitoring - New AP Detection New AP WAP4400N WAP4400N
    17. 17. WET200 Wireless Bridge <ul><li>Wireless Bridge with integrated 5-port switch </li></ul><ul><ul><li>Solution pairs with WAP200 and WRV200 </li></ul></ul><ul><ul><li>Only product with integrated 5-port switch on the market </li></ul></ul><ul><li>Key Features: </li></ul><ul><ul><li>POE – PD power means Bridge can be powered from a POE switch </li></ul></ul><ul><ul><li>1x2 MIMO – better coverage and range </li></ul></ul><ul><ul><li>QoS (WMM, 802.1p), VLANs, 802.1x, WPA2 security </li></ul></ul><ul><ul><li>Removable antennas </li></ul></ul><ul><li>Key Differentiators – POE, 1x2 MIMO, QoS, VLANs, WPA2, Multiple Ethernet ports </li></ul><ul><li>Now Shipping </li></ul>
    18. 18. 200-Series Client Adapters <ul><li>Client solution to pair with WAP200 and WRV200 </li></ul><ul><li>3 Flavors </li></ul><ul><ul><li>WMP200 – PCI Wireless Adapter </li></ul></ul><ul><ul><li>WPC200 – Cardbus Wireless Adapter </li></ul></ul><ul><ul><li>WUSB200 – USB Wireless Adapter </li></ul></ul><ul><li>1x2 MIMO – provides increased range </li></ul><ul><ul><li>Rangebooster </li></ul></ul><ul><li>Wireless 802.11G Clients with Business features </li></ul><ul><ul><li>WPA2 (ENT and PSK), WPA (ENT and PSK), WEP </li></ul></ul><ul><ul><li>Higher Throughput </li></ul></ul><ul><ul><li>Rogue Detection (when paired with WAP200) </li></ul></ul>WPC200 WUSB200 WMP200
    19. 19. Wireless Adapters Comparison Product WPC200 WMP200 WUSB200 Wireless Type 802.11g 802.11g 802.11g MIMO 1x2 1x2 1x2 New AP/Client (Wireless Security Monitor) Yes Yes Yes 802.1x Yes Yes Yes WEP Yes Yes Yes WPA Yes Yes Yes WPA2 Yes Yes Yes
    20. 20. Antennas <ul><li>HGA9N </li></ul><ul><ul><li>Omni-Directional antenna for: </li></ul></ul><ul><ul><ul><li>WAP200E </li></ul></ul></ul><ul><ul><ul><li>WAP54GPE </li></ul></ul></ul><ul><ul><li>9 dBi Antenna Gain </li></ul></ul><ul><ul><li>360 0 Radius </li></ul></ul><ul><ul><li>Lightning Protector and Weatherproof </li></ul></ul><ul><li>HGA7S </li></ul><ul><ul><li>Omni-directional antenna for: </li></ul></ul><ul><ul><ul><li>WAP200 </li></ul></ul></ul><ul><ul><ul><li>WET200 </li></ul></ul></ul><ul><ul><li>7 dBi Antenna gain </li></ul></ul>
    21. 21. Backup
    22. 22. Access Point Mode <ul><li>AP Mode supported on all Cisco Small Business Access Points </li></ul><ul><li>Network wired or wireless devices to network backbone </li></ul><ul><li>Primary Functionality  Wirelessly connect Clients to network </li></ul><ul><li>Multiple SSIDs and BSSIDs – Virtual APs </li></ul><ul><li>With Multiple APs in a single network: </li></ul><ul><ul><li>Roaming using IAPP - roam in up to 4 seconds so not conducive for roaming of WIFI phones </li></ul></ul><ul><ul><li>Auto-channel Selection – minimize interference between APs </li></ul></ul><ul><li>Wireless Security Monitor – detects new APs and Clients </li></ul>Roam
    23. 23. WDS (Wireless Distribution System) Bridging and Repeater Mode <ul><li>Supported on WAP200/2000, WAP200E, WRV200 </li></ul><ul><li>Network wired or wireless devices to network backbone from areas to which there’s no cabling: </li></ul><ul><ul><li>Warehouses </li></ul></ul><ul><ul><li>Conference Room </li></ul></ul><ul><ul><li>Labs </li></ul></ul><ul><li>Connect Buildings Close Together </li></ul><ul><li>Connect to Ethernet switch for large number of devices </li></ul><ul><li>Scale to a larger area with Repeater Mode </li></ul><ul><li>Repeater can provide expanded coverage for Multiple BSSIDs </li></ul><ul><li>Repeater Mode - Throughput reduced 50% for each repeater hop </li></ul><ul><li>Disadvantage: Can only use with products using same chipsets </li></ul><ul><li>In bridge mode, wireless clients CANNOT connect to the AP </li></ul>WAP200 Wireless-G Access Point Repeater Mode Repeater Mode
    24. 24. WDS – Wireless Distribution System Repeater Mode Diagram <ul><li>An AP can bridge up to 3 APs in Bridge or Repeater modes </li></ul><ul><li>Throughput is cut in half at every hop </li></ul><ul><li>Up to 3 levels deep </li></ul><ul><li>Max 16 Repeaters </li></ul>
    25. 25. Bridging with WET200 <ul><li>Network wired devices to network backbone from areas to where there’s no cabling: </li></ul><ul><ul><li>Warehouses, </li></ul></ul><ul><ul><li>Conference Room </li></ul></ul><ul><ul><li>Labs </li></ul></ul><ul><li>Connect Buildings Close Together </li></ul><ul><li>Connect multiple Desktop PCs, Laptops, Printers or IP Phones across a wireless network </li></ul><ul><li>For Mixed Vendor Environments or products with different Wireless chipsets </li></ul><ul><li>Port Mirror for troubleshooting </li></ul><ul><li>Disadvantage: Does not provide connectivity for Wireless Clients </li></ul>WET200 WAP200 Wireless-G Access Point WET200
    1. A particular slide catching your eye?

      Clipping is a handy way to collect important slides you want to go back to later.

    ×