Seidenader XS-2 - www.equipnet.com/listid_346797/:YOM 2009 - Sparingly used for 200 Hours only - Available for immediate d...
2 Cameras in each Station.
Pre owned seidenader xs2 ampoule inspection machine - technical details
Pre owned seidenader xs2 ampoule inspection machine - technical details
Pre owned seidenader xs2 ampoule inspection machine - technical details
Pre owned seidenader xs2 ampoule inspection machine - technical details
Pre owned seidenader xs2 ampoule inspection machine - technical details
Upcoming SlideShare
Loading in …5
×

Pre owned seidenader xs2 ampoule inspection machine - technical details

618 views
481 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
618
On SlideShare
0
From Embeds
0
Number of Embeds
11
Actions
Shares
0
Downloads
10
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Pre owned seidenader xs2 ampoule inspection machine - technical details

  1. 1. Seidenader XS-2 - www.equipnet.com/listid_346797/:YOM 2009 - Sparingly used for 200 Hours only - Available for immediate disposal.The control cabinet is directly connected with the machine. The operator panel for machine operation ismounted at the XS-2 machine. The inspection data and the imajes of each camera will be shown on theTFT- monitor. Industrial PC of B & R is used.A PLC controls the machine functions and the communications with the operator interface.The design of the machine complies with current guidelines ,OSHA regulations and CE requirements. Theelectrical standard is EN 60204-1.A prerequisite for reproductible inspection results in high precise mechanical handling which can presentobject to cameras and lights over the course of many years of production. To Seidenader ,GMPconformity,good access and long maintenance intervals are equally important.An example for this is the Seidenader column concept. All product contact parts are mounted on columsabove a central machine platform,clearly seperating the drive section of the machine from the producttransport. Quick line clearance , short cleaning times and minimum cross contamination risk are theresults of this design.In slower and mid size machines rotation and brake units are mounted onmovable modules and can be adjusted automatically for each product. Motorsand belts are fully covered and located underneath the machine table.The cameras are completely enclosed and protected against mechanicaldamage and dust .The entire camera module can be dismantled easily for maintenance purpose.A Patented mirror system is following the movement of the container –no cameramovement-no stress on connections, cables and the camera itself.
  2. 2. 2 Cameras in each Station.

×