Week 10 (2014) Input devices

347 views

Published on

Fab Academy 2014

Published in: Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
347
On SlideShare
0
From Embeds
0
Number of Embeds
34
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Week 10 (2014) Input devices

  1. 1. Week 10
  2. 2. Creater a mold of a mold Introduction to the chapter
  3. 3. LIGHT
  4. 4. • root@fablab-desktop:~# cd Escritorio/ • root@fablab-desktop:~/Escritorio# cd input device/ root@fablab-desktop:~/Escritorio/input device# sudo make -f hello.light.45.make program-usbtiny avr-objcopy -O ihex hello.light.45.out hello.light.45.c.hex; avr-size --mcu=attiny45 --format=avr hello.light.45.out AVR Memory Usage ---------------- Device: attiny45 • Program: 522 bytes (12.7% Full) (.text + .data + .bootloader) • Data: 1 bytes (0.4% Full) (.data + .bss + .noinit) • avrdude -p t45 -P usb -c usbtiny -U flash:w:hello.light.45.c.hex • avrdude: AVR device initialized and ready to accept instructions • Reading | ################################################## | 100% 0.00s • avrdude: Device signature = 0x1e9206 avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude: erasing chip avrdude: reading input file "hello.light.45.c.hex" avrdude: input file hello.light.45.c.hex auto detected as Intel Hex avrdude: writing flash (522 bytes): • Writing | ################################################## | 100% 0.77s • • avrdude: 522 bytes of flash written avrdude: verifying flash memory against hello.light.45.c.hex: avrdude: load data flash data from input file hello.light.45.c.hex: avrdude: input file hello.light.45.c.hex auto detected as Intel Hex avrdude: input file hello.light.45.c.hex contains 522 bytes avrdude: reading on-chip flash data: • Reading | ################################################## | 100% 0.50s • • avrdude: verifying ... avrdude: 522 bytes of flash verified • avrdude: safemode: Fuses OK • avrdude done. Thank you. •
  5. 5. SOUND
  6. 6. • root@fablab-desktop:~/Escritorio# cd input device/ • root@fablab-desktop:~/Escritorio/input device# sudo make -f hello.mic.45.make program-usbtiny avr-objcopy -O ihex hello.mic.45.out hello.mic.45.c.hex; avr-size --mcu=attiny45 --format=avr hello.mic.45.out AVR Memory Usage ---------------- Device: attiny45 • Program: 570 bytes (13.9% Full) (.text + .data + .bootloader) • Data: 201 bytes (78.5% Full) (.data + .bss + .noinit) • avrdude -p t45 -P usb -c usbtiny -U flash:w:hello.mic.45.c.hex • avrdude: AVR device initialized and ready to accept instructions • Reading | ################################################## | 100% 0.00s • avrdude: Device signature = 0x1e9206 avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude: erasing chip avrdude: reading input file "hello.mic.45.c.hex" avrdude: input file hello.mic.45.c.hex auto detected as Intel Hex avrdude: writing flash (570 bytes): • Writing | ################################################## | 100% 0.82s • avrdude: 570 bytes of flash written • avrdude: verifying flash memory against hello.mic.45.c.hex: avrdude: load data flash data from input file hello.mic.45.c.hex: avrdude: input file hello.mic.45.c.hex auto detected as Intel Hex avrdude: input file hello.mic.45.c.hex contains 570 bytes avrdude: reading on-chip flash data: • Reading | ################################################## | 100% 0.54s • avrdude: verifying ... • avrdude: 570 bytes of flash verified • avrdude: safemode: Fuses OK • avrdude done. Thank you.
  7. 7. Vaneza Caycho

×